140M 2 Caterpillar Motor Grader Service Repair Manual

Product: MOTOR GRADER

Model: 140M 2 MOTOR GRADER R9M

Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine

Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement

Media Number -KENR8898-05

Engine - Remove and Install SMCS

Removal Procedure

Start By:

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

i04121609

Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.

Personal injury can result from hydraulic oil pressure and hot oil.

Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.

Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.

At operating temperature, the engine coolant is hot and under pressure.

Steam can cause personal injury.

Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.

Remove the fill cap slowly to relieve pressure.

Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Note: 



This is the sample of the manual

Click on the download link for complete Manual

Product: MOTOR GRADER

Model: 140M 2 MOTOR GRADER R9M

Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine

Disassembly and Assembly

12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement

Media Number -KENR8898-05

Publication Date -01/10/2018

Clean Emissions Module - Remove and Install

SMCS

Removal Procedure

Start By:

Date Updated -30/10/2018

Installation Procedure

 Copyright 1993 - 2022 Caterpillar Inc.

Product: MOTOR GRADER

Model: 140M 2 MOTOR GRADER R9M

Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine

Disassembly and Assembly

12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement

Media Number -KENR8898-05 Publication Date -01/10/2018 Date Updated -30/10/2018

Rear Gear Group - Remove and Install

SMCS

Removal Procedure

Required Tools Tool

Start By:

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

i05534526

 



Installation Procedure

NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



 





End By:

Product: MOTOR GRADER

Model: 140M 2 MOTOR GRADER R9M

Configuration: 140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine

Disassembly and Assembly 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Engine Supplement

Media Number -KENR8898-05

i07568984

Flywheel and Rear Gear Group - Remove and Install - Drive Gear

SMCS

Removal Procedure

Start By:

Keep

This is the sample of the manual

Click on the download link for complete Manual

NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.