HOW TO DECORATE YOUR PRINTME by Mumbles ANIMALS STEP 1
CHOOSE YOUR PRINTME ANIMAL FROM THE COLLECTION
SUBLIMATE ME
VINYL PRINT ME
1. SUBLIMATION PRINTING works on all of the MM060 PRINTME styles.
1. VINYL PRINTING works on all of the MM060 PRINTME styles, a vinyl with a thicker adhesive e.g a flock or glitter has the best results.
2. Once the design has been printed, tear around the edges of the sublimation paper to avoid impressions being made on the fur.
STEP 2
VINYL OR SUBLIMATE ME PLATE ME UP
3. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening. 4. Heat the press to 185°C and press for 60 seconds, if you are using additional fabric to protect the pile, press for 90 seconds as the fabric will absorb the heat. 5. Remove the protection and peel off the sublimation paper to reveal the design.
2. Place protection paper on top of the design to protect the fur. In addition, place a piece of suitable fabric over the animal to avoid the pile flattening. 3. Heat the press to 185°C and press for 15 seconds, if you are using additional fabric to protect the pile, press for 30 seconds as the fabric will absorb the heat. 4. Peel off the vinyl backing and return the protection paper before re-pressing for a further 15 seconds to seal the design.
STEP 3 ENJOY
*Above are suggested methods of decorating, requirements may vary depending on the model and type of equipment you are using.