3 COAT SYSTEM
1 PRIMER
2 TEXTURE COAT
3 TOP COAT
Seals the surface and evens out the absorption rate in the substrate, ensuring optimal adhesion for the following texture coating. It will also promote easier application of the texture coat.
Provides the base texture, which provides the aesthetic look and desired profile. Armawall has a wide range of textured finishes and the profiles range from subtle roll on texture finishes to heavier trowel applied finishes.
Designed and engineered to offer excellent dirt shedding properties and greater flexibility, which will ensure greater long-term surface and substrate protection from the elements. Armawall Satin has a proud history of over 30 years protecting properties along our coastline.
Armawall texture coatings are a three coat system. The application of a primer and texture coating creates the profile and the top coat will enhance the durability, long term protection and dirt shedding properties of your selected system. Armawall Texture Coatings are designed to perform at their optimum, when they are used as a complete coating system. With this in mind we strongly recommend that the coating system that you have selected be applied by an Armawall trained applicator, experienced in the application of the products and with knowledge of our systems. CUSTOMER CARE
TCC089 12/19 RET1894
131 686
taubmans.com.au
taubmansaustralia
taubmans
PPG Industries Australia Pty Limited. 9 Birmingham Ave, Villawood NSW 2163. ABN 82 055 500 939. Armawall® is a registered trademark of PPG Industries Australia Pty Limited. The PPG Logo is a registered trademark of PPG Industries Ohio, Inc. Colours shown are as close as possible to actual paint colours. Due to limitations of printing process, photographic and printing images may not represent the true colour. Taubmans.com.au
9 322755 074091