pewag s.r.o. CZ, 517 54 Vamberk,Smetanovo nábřeží Phone: +420494549119 Fax: +4200494541394 zavazkyPCZ@pewag.cz
Inspection certificate according to EN 10204 2.2
Product Manufacturer Identification Safety Factor
ULD 1,5T M16 PC/VI KWB 4:1
Working Load Limit
kg
1500
Proof Load Min
kN
36,8
Breaking Load Min
kN
58,9
Declaration of Conformity: Herewith we declare that the article mentioned in this test certificate complies with all the provisions of the EC Machinery Directive 2006/42/EC. Applied harmonized standards in particular: - EN 1677-1: Components for slings – Safety – Part 1: Forged steel components but mechanical values acc. to KWB company standard - EN ISO 12100: Safety of machinery – General principles for design – Risk assessment and risk reduction Other applied technical standards and specifications: - DGUV GS-HM-36: Principles of testing and certification of lifting points The relevant technical documentation is compiled in accordance with part A of Annex VII and will be transmitted electronically in response to a reasoned request by a national competent authority. The person authorized to compile this technical documentation is signatory of this test certificate. Note: In addition, it is a precondition for putting into service of the article that the operating manual has been read and understood. This declaration becomes invalid with every modification of the product not approved by KWB.
Result of Test
Manufacturer
WITHOUT ANY OBJECTION
i.A. Ladislav Petrek (Acceptance representative) .
This certificate was generated by computer and is valid without a signature.