C-TUG DINGHY WHEELS ASSEMBLY INSTRUCTIONS
Refer to our website for further instructional videos
Part One: Fork and Wheel
STEP 1
Parts list available on reverse of mounting template
DISCLAIMER: • Do not tow - walking speed only • Operate only with wheels in lowest slot - loading may cause breakage in any other position • In case of long term storage of vessel in sunlight: removal of fork + wheel assembly from bracket is recommended
STEP 2
C-TUG DINGHY WHEELS ASSEMBLY INSTRUCTIONS Part Two: Fork and Bracket
"CLICK!"
STEP 1 1a Line up locking shaft handle with fork before inserting
STEP 2 2a Slide locking shaft through bracket
2b Turn toggle lock parallel with bracket and snap down locking it in place
2c Once locking shaft is through lift fork until locking peg is lodged in notch 1a Place wheel within fork lining up Axle holes 1b Insert Axle with grey cap on outside
2a Line up grey locking pegs with slots in fork
1c Slide through until grey locking pegs reach fork - see STEP 2
2b Press axle into fork and lock into place by turning clockwise with flatblade screwdriver
STEP 3 Important tips for inserting locking shaft
Tip: Ensure you are holding fork closest to you - to allow the opposing fork to give way to the axle
1b Insert fork assembly into mounting bracket with locking peg below lowest notch UNLOCKED
B
STEP 3
B LOCKED
INCORRECT
Line up toggle lock with locking shaft before inserting to avoid getting stuck
Line up bumps on locking shaft with notches in bracket before insertion
Notches in bracket
CO
RR
EC
T
With locking handle in line with fork - wheel is unlocked C This allows the fork to be pushed down and then moved to a Turn handle different clicking into notch place with arrow pointing down fork to lock Reverse this process to remove the fork and wheel from the bracket
C