TITAN TABLES
TITAN TABLES SPECS
3 Heights Available Frame Color Table Foot Options
1.75" Solid Maple Wood
AERO-LIFT SERIES
AERO-LIFT SERIES SPECS
Features
Table can easily be set on an incline for physics experiments.
Height Adjusts from 27 “- 42”
Table Foot Options
Extended Footprint Glides on the Legs Offer a Secure Grip when Adjusting
Legs Adjust in 3/4” Increments from 27”-42”H featuring Laser Marked Numbers
Optional 4 Heavy-Duty Swivel Locking 3” Casters Increases the Table Height by 3¼"
Reinforcement Board Under Tabletops for Added Strength 1.2” Thick
1.75" Solid Maple Wood
HEAVY-DUTY TABLES SPECS
Welded 12-Gauge Leg Top Plate
Leveling Glides Can Add up to 3/4" Height to Table
Exceeds 500lbs. Static Weight Capacity
Table Sizes
1.75" Solid Maple Wood
COLLABORATOR
COLLABORATOR SPECS
1.75" Solid Maple Wood
CLUSTER SWIVEL BOOTH SPECS
CLEANING & CARE
Heavy-Duty Solid Maple Butcherblock Tabletop
CLEANING INSTRUCTIONS
For cleaning wipe down the top with warm, soapy water. The top should then be dried with a rag or towel to ensure that no water remains standing on the surface. Most normal household cleaners can also be used to clean the top.*
If the top should stain -as a result of red wine, for example- most can be easily removed with fingernail polish remover or chlorine bleach, with no damage to the finish.
*Exceptions: Do not use ammonia-based products, as they can cloud the finish.
Abrasive cleansers and scouring pads can scratch the top.
Tops must be dried after cleaning to ensure that no water remains. Leaving a wet surface can cause severe damage to the tabletop.
MAINTENANCE AND CARE
While NPS Butcherblock Tops feature an exceptional finish, both from an environmental and a durability standpoint, NO FINISH IS WATERPROOF.
To keep the top pristine, treat the top like a piece of non-laminated furniture. Based on the frequency that your tops are washed, BUTCHERBLOCK TOPS REQUIRE REFINISHING.
Refinishing can be done fairly quickly using a rag and the right product.
STANDARD SATIN FINISH
Refinishing can be done fairly quickly using a rag and Emmet’s Good Stuff Gel Urethane Urethane-Based Satin Finish
Recommended to re-finish every 2-3 weeks depending on usage.
CUSTOM GLOSSY FINISH
Refinishing can be done fairly quickly using a rag and Boos® EZ-DO Finish Varnique Semi-Gloss Finish
Recommended to re-finish every 3-4 weeks depending on usage.
