according to Safe Work Australia
Swiss GriP Non-Slip PRO Part A
Material number K9100 / K9200
Revision date: 08/2/2022
Version: 2.0
Language:en-AU
Date of print: 08/2/2022
Page: 1 of 8
1.Product identifier and identity for the chemical
Product identifier
Trade name: Swiss GriP Non-Slip PRO Part A
Recommended use of the chemical and restrictions on use
General use: Coating agent
Suppliers name, address and phone number
Company name: Grip Safety Coatings AG
Street/POB-No.: Aahusweg 16
Postal Code, city: 6403 Küssnacht am Rigi Switzerland
WWW: www.grip-antislip.com
E-mail: info@grip-antislip.com
Telephone: +41 / 41 / 726 20 80
Telefax: +41 / 41 / 726 20 81
Department responsible for information:
Additional information: info@gip-antislip.com
Importer: Swiss GriP Australia Pty Ltd, 448 City Road South Melbourne, VIC 3205 Australia Tel. +61 (0)3 7020 2041 swissgrip.com.au
Emergency phone number
Australia – 1800 033 111
Tox-Zentrum Zürich, +41 / 44 / 251 51 51, or 145
2.Hazard Identification
Classification of the hazardous chemical
GHS classification
This mixture is classified as not hazardous.
Label elements
Hazard statements: not applicable
Precautionary statements: not applicable
Other hazards which do not result in classification
Special danger of slipping by leaking/spilling product.
Mixtures
Hazardous ingredients:
Swiss GriP Non-Slip PRO Part A
3.Composition/information on ingredients
CAS No.Designation
ConcentrationClassification
CAS 107-98-21-Methoxy-2-propanol< 3 %Flammable liquid - Category 3.
Specific target organ toxicity (single exposure)Category 3.
CAS 108-65-62-Methoxy-1methylethyl acetate < 2.5 %Flammable liquid - Category 3.
CAS 111-76-22-butoxyethanol< 2.5 %Acute toxicity - oral - Category 4.
Acute toxicity - dermal - Category 4.
Acute toxicity - inhalation - Category 4.
Skin irritation - Category 2.
Eye irritation - Category 2A.
CAS 108-01-02-Dimethylaminoethanol< 1 %Flammable liquid - Category 3.
Acute toxicity - oral - Category 4.
Acute toxicity - dermal - Category 4.
Acute toxicity - inhalation - Category 3.
Skin corrosion - Category 1B.
Specific target organ toxicity (single exposure)Category 3.
CAS 68439-49-6 Alcohols, C16-18, ethoxylated < 0.25 %Acute toxicity - oral - Category 4.
Eye irritation - Category 2A.
Aquatic toxicity - acute - Category 1 (M-factor = 1).
Additional information: Contains Talcum, 2-butoxyethanol ethylene glycol monobutyl ether butyl cellosolve and silicon dioxide (Quartz (SiO2)). The maximum workplace exposure limits are, where necessary, listed in section 8.
4.First Aid Measures
Description of necessary first aid measures
General information: If unconscious and breathing is OK, place in the recovery position and seek medical advice. In case of inhalation: Move victim to fresh air; if necessary, provide artificial respiration or oxygen. Seek medical treatment in case of troubles.
Following skin contact: Immediately wipe affected skin area with paper towel or cloth. Thoroughly wash skin with soap and water. Take off contaminated clothing and wash it before reuse.
In case of skin irritation, consult a physician. Avoid strong ultraviolet radiation.
After eye contact: Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist. Avoid strong ultraviolet radiation.
After swallowing: Never give anything by mouth to an unconscious person. Rinse mouth. Do not induce vomiting. Immediately get medical attention.
DATA SHEET according to Safe Work Australia
Swiss GriP Non-Slip PRO Part A
Material number K9100 / K9200 Page: 3 of 8
Symptoms caused by exposure
After contact with skin:
Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin resulting in non-allergic contact dermatitis and/or absorption through skin. After eye contact: Liquid splashes can lead to irritations of the eyes.
Medical Attention and Special Treatment
Treat symptomatically.
5.Fire Fighting Measures
Suitable extinguishing media
Water mist, alcohol resistant foam, extinguishing powder, carbon dioxide.
Extinguishing media which must not be used for safety reasons: Full water jet
Specific hazards arising from the chemical
May form dangerous gases and vapours in case of fire. Furthermore, there may develop: Nitrogen oxides (NOx), carbon monoxide and carbon dioxide.
Special protective equipment and precautions for fire fighters
Special protective equipment for firefighters:
Wear self-contained positive pressure breathing apparatus and full firefighting protective clothing.
Additional information: Hazchem-Code: -
Use water spray jet to knock down vapours. Move container away or cool with water from a protected position. Do not breathe fumes. Do not allow fire water to penetrate into surface or ground water.
6.Accidental release measures
Personal precautions, protective equipment and emergency procedures
Provide adequate ventilation. Do not breathe vapours or spray mist. Wear appropriate protective equipment. Take off contaminated clothing and wash it before reuse.
Environmental precautions
Do not allow to penetrate into soil, waterbodies or drains. If necessary notify appropriate authorities.
Methods and material for containment and cleaning up
Soak up with absorbent materials such as sand, siliceus earth, acid- or universal binder. Store in special closed containers and dispose of according to ordinance. Clean using cleansing agents. Do not use solvents.
Additional information: Special danger of slipping by leaking/spilling product.
SHEET according to Safe Work Australia
Swiss GriP Non-Slip PRO Part A
7.Handling and Storage
Precautions for safe handling
Advices on safe handling: Provide adequate ventilation, and local exhaust as needed. Do not breathe vapours or spray mist.
Wear appropriate protective equipment. Take off contaminated clothing and wash it before reuse.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Persons with a history of skin sensitisation problems should not be employed in any process in which this product is used.
Precautions against fire and explosion:
Keep away from sources of ignition and heat.
Conditions for safe storage, including any incompatibilities
Requirements for storerooms and containers:
Store in well closed containers in a cool, dry, well-ventilated area. Store carefully closed containers upright to prevent any leaks. Keep only in original container.
Storage temperature: 5 °C up to 20 °C. Protect from sunlight.
Hints on joint storage: Do not store together with oxidizing agents, strong acids or strong bases. Do not store together with food.
8.Exposure controls/personal protection
Control parameters
Occupational exposure limit values:
CAS No.DesignationType
14807-96-6Talcum
107-98-21-Methoxy-2propanol
Australia: OEL-TWA
Limit value
2.5 mg/m³
Australia: OEL-STEL 553 mg/m³; 150 ppm
Australia: OEL-TWA
7631-86-9Silicon dioxideAustralia: OEL-TWA
108-65-62-Methoxy-1methylethyl acetate
Australia: OEL-STEL
Australia: OEL-TWA
111-76-22-butoxyethanolAustralia: OEL-STEL
Australia: OEL-TWA
108-01-02Dimethylaminoeth anol
14808-60-7Silicon dioxide (Quartz (SiO2))
Australia: OEL-STEL
Australia: OEL-TWA
Australia: OEL-TWA
Appropriate engineering controls
369 mg/m³; 100 ppm
2 mg/m³
548 mg/m³; 100 ppm (may be absorbed through the skin)
274 mg/m³; 50 ppm (may be absorbed through the skin)
242 mg/m³; 50 ppm (may be absorbed through the skin)
96.9 mg/m³; 20 ppm (may be absorbed through the skin)
22 mg/m³; 6 ppm
7.4 mg/m³; 2 ppm
0.05 mg/m³
Provide adequate ventilation, and local exhaust as needed.
Personal
SAFETY DATA SHEET
according to Safe Work Australia
Swiss GriP Non-Slip PRO Part A
Material number K9100 / K9200
protective equipment (PPE)
Occupational exposure controls
Page: 5 of 8
Respiratory protection: Respiratory protection must be worn according to AS/NZS 1715 and AS/NZS 1716 whenever the WEL levels have been exceeded. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product.
Hand protection: Protective gloves according to AS/NZS 2161.
Eye protection: Tightly sealed eye protectors according to AS/NZS 1337.
Body protection: Wear suitable protective clothing.
General protection and hygiene measures:
Do not breathe vapours or spray mist. When using do not eat, drink or smoke. Take off contaminated clothing and wash it before reuse. After work, wash hands and face.
Environmental exposure controls
Refer to 6.: Section "Environmental precautions".
9.Physical and chemical properties
Information on basic physical and chemical properties
Appearance: Physical state at 20 °C and 101.3 kPa: liquid Colour: Varying, depends on colouring.
Odour: not applicable
Odour threshold: No data available
pH: 8
Melting point/freezing point: No data available
Initial boiling point and boiling range: (derived) 100 °C
Flash point/flash point range: not applicable
Evaporation rate: No data available
Flammability: No data available
Explosion limits: LEL (Lower Explosion Limit): not applicable UEL (Upper Explosive Limit): not applicable
Vapour pressure: No data available
Vapour density: No data available
Density: at 20 °C: approx. 1.1 g/mL
Water solubility: completely soluble
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: not self-igniting
Decomposition temperature: No data available
Additional information
Viscosity, dynamic: 5500 mPa*s
Volatile organic compounds content (VOC): 7 % by weight
10.Stability and Reactivity
Reactivity: Polymerization can occur under certain conditions.
SAFETY DATA SHEET
according to Safe Work Australia
Swiss GriP Non-Slip PRO Part A
Date of print: 08/2/2022
Material number K9100 / K9200 Page: 6 of 8
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions:
May undergo uncontrolled exothermic polymerization upon contact with peroxides, reactive metals, strong alkaline material and radical former.
Conditions to avoid: Keep away from heat. Conditions to avoid: Strong ultraviolet radiation.
Incompatible materials: Strong oxidizing agents, strong acids, strong alkalis, peroxides and Metals.
Hazardous decomposition products: No hazardous decomposition products when regulations for storage and handling are observed.
Thermal decomposition: No data available
11.Toxicological information
Information on toxicological effects
Toxicological effects: Acute toxicity (oral): Lack of data.
Acute toxicity (dermal): Lack of data.
Acute toxicity (inhalative): Lack of data.
Skin corrosion/irritation: Lack of data.
Serious eye damage/irritation: Lack of data.
Sensitisation to the respiratory tract: Lack of data.
Skin sensitisation: Lack of data.
Germ cell mutagenicity/Genotoxicity: Lack of data.
Carcinogenicity: Lack of data.
Reproductive toxicity: Lack of data.
Effects on or via lactation: Lack of data.
Specific target organ toxicity (single exposure): Lack of data.
Specific target organ toxicity (repeated exposure): Lack of data.
Aspiration hazard: Lack of data.
Symptoms
After contact with skin:
Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin resulting in non-allergic contact dermatitis and/or absorption through skin. After eye contact: Liquid splashes can lead to irritations of the eyes.
12.Ecological information
Ecotoxicity
Further details: No data available
Persistence and degradability
Further details: No data available
Bioaccumulative potential
according to Safe Work Australia
Swiss GriP Non-Slip
Partition coefficient: n-octanol/water: No data available
Mobility in soil
No data available
Other adverse effects
Part A
General information: Do not allow to enter into ground-water, surface water or drains.
13.Disposal considerations
Waste treatment methods
Product
Recommendation: Dispose of waste according to applicable legislation.
Package
Recommendation: Dispose of waste according to applicable legislation. Handle contaminated packages in the same way as the substance itself. Non-contaminated packages may be recycled.
14.Transport information
Land transport (ADG)
Product designation: Not restricted
Sea transport (IMDG)
Proper shipping name: Not restricted
Marine pollutant: no
Air transport (IATA)
Proper shipping name: Not restricted
Further information
No dangerous good in sense of these transport regulations.
Hazchem-Code:
National regulations - Australia
15.Regulatory information
AICS: All ingredients are listed or exempt from listing.
Further regulations, limitations and legal requirements
No data available
Abbreviations and acronyms:
Swiss GriP Non-Slip PRO Part A
16.Other information
ADN: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
OEL: Occupational Exposure Limit Value
AS/NZS: Australian Standards/New Zealand Standards
CAS: Chemical Abstracts Service
CFR: Code of Federal Regulations
CLP: Classification, Labelling and Packaging
DMEL: Derived minimal effect level
DNEL: Derived no-effect level
EC: European Community
EN: European Standard
IATA: International Air Transport Association
IBC Code: International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk
IMDG Code: International Maritime Dangerous Goods Code
LEL: Lower Explosion Limit
MARPOL: Maritime Pollution: The International Convention for the Prevention of Pollution from Ships
M-factor: Multiplication factor
OSHA: Occupational Safety and Health Administration
PBT: Persistent, bioaccumulative and toxic
PNEC: Predicted no-effect concentration
RID: Regulations Concerning the International Carriage of Dangerous Goods by Rail
TLV: Threshold Limit Value
TSCA: Toxic Substance Control Act
UV: Ultraviolet
vPvB: Very persistent and very bioaccumulative
WEL: Workplace Exposure Limit
Date of first version: 19/1/2022
Department issuing data sheet
Contact person: see section 1: Department responsible for information
The information in this data sheet has been established to our best knowledge and was up-to-date at time of revision. It does not represent a guarantee for the properties of the product described in terms of the legal warranty regulations.
