Ready-to-use polymer filler paste with water-repellent
DROPEFFECT® and mouldresistant BIOBLOCK® technology, for grouting joints from 2 to 10 mm in ceramic tiles
WHERE TO USE
Flexcolor is used for grouting joints in all types of tiles and mosaic on interior floors and walls and exterior walls.
TECHNICAL CHARACTERISTICS
Flexcolor is an acrylic resin-based grouting mortar dispersed in water, with a mineral filler and admixtures.
Flexcolor is a ready-to-use paste, and its consistency makes it easy to apply.
Flexcolor sets through the evaporation of its water content, becomes flexible with a high bond strength which is resistant to vibration and the deformation of building materials. These characteristics make it particularly suitable for exterior façades and flexible substrates (e.g. panels for exhibition stands).
Flexcolor may be used to grout joints from 2 mm to 10 mm wide.
Flexcolor is easy to apply, remove and clean from the surface of tiles. Once dry, it has a uniform colour, a smooth finish and is resistant to water and the formation of mould, thanks to BioBlock® technology.
Bioblock® technology consists of special organic molecules which are distributed uniformly in the micro-structure of the tile joint, to block the formation of micro-organisms at the root causing alterations due to mould.
DropEffect® technology, with a synergic effect, makes the tile joints water-repellent and reduces the absorption of surface water.
RECOMMENDATIONS
• Do not use on exterior floors.
• Do not use to grout joints which are continuously immersed in water (swimming pools, fountains, etc.).
• Do not use to grout joints in natural stone.
Flexcolor
APPLICATION PROCEDURE
Filling joints
Joints must be clean and free of dust. Fill the joints with Flexcolor using a special MAPEI trowel or rubber float. Do not leave any gaps or steps, and apply to create a smooth finish. Remove excess Flexcolor from the surface while it is still fresh, by moving the trowel or float diagonally across the joints.
Finish
has started to form, remove the excess Flexcolor using a damp Scotch-Brite® pad, moving it diagonally across the joints. Rinse the Scotch-Brite® pad frequently, using two different containers of water: one to remove the excess mix from the sponge, and the other, containing clean water, to rinse the sponge. Final cleaning of the surface and finishing of the joints can then be carried out using a slightly damp, hard cellulose sponge.
SET TO LIGHT FOR TRAFFIC
Floors are ready for foot traffic after approx. 48 hours.
READY FOR USE
Surfaces grouted with Flexcolor may be put into service after approximately 7 days.
CLEANING
Residues may be removed the day after grouting using a dry cloth. Tools and materials are easy to clean with water while the product is still fresh. Once dry, the product must be removed using mechanical means, or a liquid cleaner such as benzene, acetone solvent or Pulicol 2000.
Flexcolor
CONSUMPTION
The consumption of Flexcolor varies from 0.2 kg/m2 to 1 kg/ m , according to the size of the joints.
PACKAGING
Flexcolor is available in 5 kg plastic tubs.
COLOURS AVAILABLE
Flexcolor is available in white 100, silver-grey 111 and beige 2000 132.
STORAGE
Flexcolor may be stored for 24 months in its original packaging in a dry place.
SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
Flexcolor is not considered as dangerous according to the current regulation regarding the classification of mixtures. We recommend the use of protective gloves and goggles and to take the usual precautions for handling chemicals. For further and complete information about the safe use of our product please refer to the latest version of our Material Safety Data Sheet.
PRODUCT FOR PROFESSIONAL USE.
WARNING
Although the technical details and recommendations contained in this product data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical application; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.
Please refer to the current version of the Technical Data Sheet, available from our website www.mapei.com
TECHNICAL DATA (typical values)
PRODUCT IDENTITY
Consistency: thick paste
Consistency: 3
Bulk density (g/cm3): 1.60
Dry solids content (%): 88
Brookfield viscosity (mPa·s): 600,000
APPLICATION DATA (at +23°C and 50% R.H.)
Application temperature range: thick paste
Waiting time for grouting after laying – on walls bonded with normal adhesive: – on walls bonded with quick-setting adhesive: – on walls laid with mortar: – on floors bonded with normal adhesive: – on floors bonded with quick-setting adhesive: – on floors bonded with mortar: 4-8 hours 1-2 hours 2-3 days 24 hours 3-4 hours 7-10 days
Waiting time before finishing operation: 10-15 minutes
