WPM 200
DESCRIPTION WPM 200 is a Blue Class III fibre reinforced water based SBR membrane that has been designated for a range of waterproofing applications for under Tile. Can be used for wet areas, balconies and deck areas that are going to be tiled and not left exposed. Excellent adhesion to concrete, masonry, renders and internal cement sheeting and plaster board sheeting. For external sheeting such as Scyon the substrate must be primed with a moisture Barrier.
CLASSIFICATION Meet the requirement of: AS 4858:2004 wet area membranes as a Class III
SURFACE PREPERATION The surface must be clean, dry, firm and free of dust oil, grease, wax and curing compounds.
DRYING TIME
The substrate must be installed according to the relevant
WPM 200 is not designed for use as an exposed membrane.
standards and manufacturer recommendations. All porous
• Recoat 4 hours @ 230C
surfaces must be primed with Grants PR 100 Primer.
• Dry Film 12 hours @ 230C
For non-porous surfaces such as external cement sheeting
• Tiling - Toppings 24-48 hours @ 230C
e.g. Scyon it must be primed with a Moisture Barrier. As a
• Flood Test 7 days
wet area membrane requires a suitable bond breaker at all substrate junctions please use Maxisil Membrane.
MOVEMENT JOINTS
COVERAGE A minimum of 2 coats is recommended to be applied at a total minimum coverage of 1.5 litres/m2
Movement joints must be in accordance with Australian Standards AS 3958-2023
1mm dry film thickness is recommended for all applications wall and floor.
PACKAGING WPM 200 is available in 15kg pails.
1300 733 000