Mapenet150
Alkali-resistant (according to ETAG 004 test, paragraph 5.6.7.1) fibre glass mesh used to reinforce waterproof protection layers, antifracture membranes and cementitious smoothing and levelling layers
WHERE TO USE
Reinforced strengthening for:
a) Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic used for waterproofing terraces, balconies, swimming pools, baths, shower cubicles, etc. with ceramic tile or stone finishes;
b) protective, flexible smoothing layers of Mapelastic, Mapelastic Smart, Mapelastic Turbo or Monolastic applied on internal and external cementitious substrates with micro cracks;
c) products of the Plastimul range when applied on substrates with micro cracks;
d) cementitious skim coats in general.
TECHNICAL CHARACTERISTICS
The mesh is made from glass fibres treated with a special primer which makes it resistant to alkalis according to the requirements of the EAD specification 040016-00-0404 (that replaced ETAG 004 from October the 28, 2020).
Once the waterproofing layer where it is installed has hardened, Mapenet 150 reinforces the layer to protect against the formation of cracks due to movement in the substrate or the tiled surface. It also makes it easier to apply an even layer of the chosen product and improves the system’s resistance to temperature variations and abrasion.
APPLICATION PROCEDURE
Mapenet 150 must be completely embedded in the layer to be reinforced. Apply the mesh as follows:
• apply an even layer of the product;
• while the product is still fresh, lay the Mapenet 150 mesh on the surface and press it gently with the trowel so that it is embedded in the layer;
• wait for the layer to dry and, if required, apply a second layer of the product.
Overlap each piece of Mapenet 150 by at least 5 cm.
PACKAGING
50 metre rolls, 1 m wide.
The product may be stored for limitless time if stored in a clean and dry place.
SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION
Mapenet 150 is an article and referring to the current European regulations (Reg. 1906/2007/EC - REACH) does not require the preparation of the Safety Data Sheet. During use it is recommended to wear gloves and goggles and follow the safety requirements of the workplace.
PRODUCT FOR PROFESSIONAL USE.
