Safety Data Sheet
KERANET liquid
Safety Data Sheet dated: 01/09/2020 - version 1
Date of first edition: 01/09/2020
1. Identification
GHS Product identifier
Mixture identification:
Trade name: KERANET liquid
Trade code: 900141
Recommended use of the chemical and restrictions on use
Recommended use: Acidic cleaner for ceramic tiles
Uses advised against: Data not available
Supplier's details
Company: MAPEI AUSTRALIA Pty Ltd 180 Viking Drive Wacol QLD 4076 Australia
Responsable: sales@mapei.com.au
Emergency phone number
Australian Poisons Information Centre 24 Hour Service 13 11 26
Police or Fire Brigade 000
2. Hazard identification
Classification of the Hazardous chemical
Skin Irrit. 2 Causes skin irritation.
Eye Irrit. 2A Causes serious eye irritation.
Adverse physicochemical, human health and environmental effects: No other hazards
GHS label elements, including precautionary statements
Pictograms and Signal Words
Warning
Hazard statements:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
Precautionary statements:
P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see supplementary instructions on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
Other hazards which do not result in a classification
Other Hazards: No other hazards
3. Composition/information on ingredients
Substances
no data available
Mixtures
Mixture identification: KERANET liquid
Hazardous components within the meaning of the "Australian Work Health and Safety (WHS)" regulation and related classification:
Concentration
(% w/w)
≥10 - <20 % sulphamidic acid; sulphamic acid
CAS:5329-14-6
EC:226-218-8
Index:016-02600-0
4. First-aid measures
Description of necessary first-aid measures
In case of skin contact:
Immediately take off all contaminated clothing.
Remove contaminated clothing immediately and dispose of safely.
Eye Irrit. 2A, H319; Skin Irrit. 2, H315; Aquatic Chronic 3, H412 01-2119488633-28-XXXX
After contact with skin, wash immediately with soap and plenty of water.
In case of eyes contact:
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist immediately.
Protect uninjured eye.
In case of Ingestion:
Do not induce vomiting, get medical attention showing the SDS and the hazard label.
In case of Inhalation:
Remove casualty to fresh air and keep warm and at rest.
Symptoms caused by exposure
Eye irritation
Eye damages
Skin Irritation
Erythema
Medical attention and special treatment
In case of accident or unwellness, seek medical advice immediately (show directions for use or safety data sheet if possible).
5. Fire-fighting measures
Suitable extinguishing media
None in particular.
Water.
Carbon dioxide (CO2).
Specific hazards arising from the chemical
Do not inhale explosion and combustion gases.
Burning produces heavy smoke.
Hazardous combustion products: no data available
Explosive properties: ==
Oxidizing properties: no data available
Special protective equipment and precautions for fire-fighters
Use suitable breathing apparatus.
Collect contaminated fire extinguishing water separately. This must not be discharged into drains.
Move undamaged containers from immediate hazard area if it can be done safely.
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear personal protection equipment.
Remove persons to safety.
See protective measures under point 7 and 8.
Environmental precautions
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains.
Retain contaminated washing water and dispose it.
In case of gas escape or of entry into waterways, soil or drains, inform the responsible authorities.
Suitable material for taking up: absorbing material, organic, sand
Methods and material for containment and cleaning up
Suitable material for taking up: absorbing material, organic, sand
Wash with plenty of water.
7. Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers. Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.
See also section 8 for recommended protective equipment.
Conditions for safe storage, including any incompatibilities
Incompatible materials: None in particular.
Instructions as regards storage premises: Adequately ventilated premises.
8. Exposure controls/personal protection
Control parameters – exposure standards, biological monitoring
Predicted No Effect Concentration (PNEC) values
Component CAS-No. PNEC Limit
sulphamidic acid; sulphamic acid
5329-14-6 0.173 mg/kg Freshwater sediments
0.0173 mg/kg Marine water sediments
Derived No Effect Level. (DNEL)
Component CAS-No. Worker Industr y Worker Profess ional Consu mer Exposure
sulphamidic acid; sulphamic acid
5329-14-6 10 mg/kg 5 mg/kg
Appropriate engineering controls no data available
Eye protection:
Use close fitting safety goggles, don't use eye lens.
Protection for skin:
Human Oral Long Term, systemic effects
Human Dermal Long Term, systemic effects 5 mg/kg
Individual protection measures, such as personal protective equipment (PPE)
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton.
Protection for hands:
Use protective gloves that provides comprehensive protection, e.g. P.V.C., neoprene or rubber.
Respiratory protection: no data available
Respiratory protection must be used where exposure levels exceed workplace exposure limits. Refer to AS/NZS 1715-1716 for information on selection and use of appropriate respiratory protection equipment.
9. Physical and chemical properties
Color: Colourless
Appearance: liquid
Odour: Odourless
Odour threshold: no data available pH: 1.00
Melting point / freezing point: no data available
Initial boiling point and boiling range: 100 °C (212 °F)
Flash point: no data available
Evaporation rate: no data available
Flammability (Solid, Gas): no data available
Upper/lower flammability or explosive limits: no data available
Vapour pressure: no data available
Vapour density: no data available
Relative density: 1.10 g/cm3
Solubility
Solubility in water: soluble
Solubility in oil: insoluble
Partition coefficient (n-octanol/water): no data available
Auto-ignition temperature: no data available
Decomposition temperature: no data available
Viscosity: no data available
Specific heat value: no data available
Saturated vapour concentration: no data available
Release of invisible flammable vapours and gases: no data available
Particle size: no data available
Particle size distribution: no data available
Shape and aspect ratio: no data available
Crystallinity: no data available
Dustiness: no data available
Specific surface area: no data available
Degree of aggregation or agglomeration, and dispersibility: no data available
Biodurability or biopersistence: no data available
Surface coating or chemistry: no data available
VOC % (Volatile Organic Compound) : No data available
10. Stability and reactivity
Reactivity
Stable under normal conditions
Chemical stability no data available
Possibility of hazardous reactions
None.
Conditions to avoid
Stable under normal conditions.
Incompatible materials
None in particular.
Hazardous decomposition products
SECTION 11: Toxicological information
Information on toxicological effects
Toxicological information of the mixture:
There is no toxicological data available on the mixture. Consider the individual concentration of each component to assess toxicological effects resulting from exposure to the mixture.
Toxicological information on main components of the mixture:
sulphamidic acid; sulphamic acid
a) acute toxicity
LD50 Oral Rat = 2065 mg/kg
LD50 Oral Rat = 1450 mg/kg
If not differently specified, the information required in the regulation and listed below must be considered as N.A.
a) acute toxicity
b) skin corrosion/irritation
c) serious eye damage/irritation
d) respiratory or skin sensitisation
e) germ cell mutagenicity
f) carcinogenicity
g) reproductive toxicity
h) STOT-single exposure
Toxicological kinetics, metabolism and distribution information
i) STOT-repeated exposure
j) aspiration hazard
12. Ecological information
Ecotoxicity
Adopt good working practices, so that the product is not released into the environment. Eco-Toxicological Information:
List of components with eco-toxicological properties
Component Ident. Numb. Ecotox Infos sulphamidic acid; sulphamic acid CAS: 5329-14-6 -
EINECS: 016-026-
00-0 - INDEX: 226218-8
a) Aquatic acute toxicity : LC50 Fish = 70.3 mg/L 96
a) Aquatic acute toxicity : EC50 Daphnia > 71 mg/L 24
Persistence and degradability
Bioaccumulative potential
Mobility in soil
a) Aquatic acute toxicity : LC50 Fish Pimephales promelas = 14.2 mg/L 96h EPA no data available no data available no data available
Other adverse effects no data available
13. Disposal considerations
Disposal methods
The generation of waste should be avoided or minimized wherever possible. Recover if possible. Methods of disposal:
Disposal of this product, solutions, packaging and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.
Dispose of surplus and nonrecyclable products via a licensed waste disposal contractor. Do not dispose of waste into sewers.
Disposal considerations:
Do not allow to enter drains or watercourses.
Dispose of product according to all federal, state and local applicable regulations. If this product is mixed with other wastes, the original waste product code may no longer apply and the appropriate code should be assigned.
Dispose of containers contaminated by the product in accordance with local or national legal provisions. For further information, contact your local waste authority.
Special precautions:
This material and its container must be disposed of in a safe way. Care should be taken when handling untreated empty containers. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Empty containers or liners may retain some product residues. Do not re-use empty containers.
14. Transport information
UN number 3264
UN proper shipping name
ADG-Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULPHAMIC ACID SOLUTION)
ADR-Shipping Name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULPHAMIC ACID SOLUTION)
IATA-Technical name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULPHAMIC ACID SOLUTION)
IMDG-Technical name: CORROSIVE LIQUID, ACIDIC, INORGANIC, N.O.S. (SULPHAMIC ACID SOLUTION)
Transport hazard class(es)
ADG-Class: 8
ADR-Class: 8
IATA-Class: 8
IMDG-Class: 8
Packing group, if applicable
ADG-Packing Group: III
ADR-Packing Group: III
ADR-Packing Group: III
IATA-Packing group: III
IMDG-Packing group: III
Environmental hazards
ADG-Environmental Pollutant: No
Marine pollutant: No no data available
Special precautions for user
IATA-Subsidiary hazards:
IMDG-Subsidiary hazards: no data available
Additional Information no data available
HazChem Code/Emergency Action code no data available
15. Regulatory information
Safety, health and environmental regulations specific for the product in question
This Safety Data Sheet has been prepared according to the Australian Work Health and Safety (WHS) act and the Code of Practice on preparation of safety data sheets for Hazardous Chemicals.
AICS: all components are listed
16. Other information
Code Description
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H412 Harmful to aquatic life with long lasting effects.
This document was prepared by a competent person who has received appropriate training. Main bibliographic sources:
ECDIN - Environmental Chemicals Data and Information Network - Joint Research Centre, Commission of the European Communities
SAX's DANGEROUS PROPERTIES OF INDUSTRIAL MATERIALS - Eight Edition - Van Nostrand Reinold
The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and constitutes no guarantee of particular quality.
It is the duty of the user to ensure that this information is appropriate and complete with respect to the specific use intended. This SDS cancels and replaces any preceding release.
Legend to abbreviations and acronyms used in the safety data sheet:
ACGIH: American Conference of Governmental Industrial Hygienists
ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road. AND: European Agreement concerning the International Carriage of Dangerous Goods by Inland Waterways
ATE: Acute Toxicity Estimate
ATEmix: Acute toxicity Estimate (Mixtures)
BCF: Biological Concentration Factor
BEI: Biological Exposure Index
BOD: Biochemical Oxygen Demand
CAS: Chemical Abstracts Service (division of the American Chemical Society).
CAV: Poison Center
CE: European Community
CLP: Classification, Labeling, Packaging.
CMR: Carcinogenic, Mutagenic and Reprotoxic
COD: Chemical Oxygen Demand
COV: Volatile Organic Compound
CSA: Chemical Safety Assessment
CSR: Chemical Safety Report
DMEL: Derived Minimal Effect Level
DNEL: Derived No Effect Level.
DPD: Dangerous Preparations Directive
DSD: Dangerous Substances Directive
EC50: Half Maximal Effective Concentration
ECHA: European Chemicals Agency
EINECS: European Inventory of Existing Commercial Chemical Substances.
EINECS: European Inventory of Existing Commercial Chemical Substances.
ES: Exposure Scenario
GefStoffVO: Ordinance on Hazardous Substances, Germany.
GHS: Globally Harmonized System of Classification and Labeling of Chemicals.
IARC: International Agency for Research on Cancer
IATA: International Air Transport Association.
IATA-DGR: Dangerous Goods Regulation by the "International Air Transport Association" (IATA).
IC50: half maximal inhibitory concentration
ICAO: International Civil Aviation Organization.
ICAO-TI: Technical Instructions by the "International Civil Aviation Organization" (ICAO).
IMDG: International Maritime Code for Dangerous Goods.
INCI: International Nomenclature of Cosmetic Ingredients.
IRCCS: Scientific Institute for Research, Hospitalization and Health Care
KSt: Explosion coefficient.
LC50: Lethal concentration, for 50 percent of test population.
LD50: Lethal dose, for 50 percent of test population.
LDLo: Leathal Dose Low
N.A.: Not Applicable
N/A: Not Applicable
N/D: Not defined/ Not available
NA: Not available
NIOSH: National Institute for Occupational Safety and Health
NOAEL: No Observed Adverse Effect Level
OSHA: Occupational Safety and Health Administration.
PBT: Persistent, Bioaccumulative and Toxic
PGK: Packaging Instruction
PNEC: Predicted No Effect Concentration.
PSG: Passengers
RID: Regulation Concerning the International Transport of Dangerous Goods by Rail.
STEL: Short Term Exposure limit.
STOT: Specific Target Organ Toxicity.
TLV: Threshold Limiting Value.
TWATLV: Threshold Limit Value for the Time Weighted Average 8 hour day. (ACGIH Standard).
vPvB: Very Persistent, Very Bioaccumulative.
WGK: German Water Hazard Class.