Let’s build the
Jackson Side Table 0
70
SEMBL
Y
A
S
M I N UT E
7
SKU 34105
Scan me! Free Lifetime Warranty 23-0815-VN
Ok, let’s get rolling
What’s included
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
70:00 What you need
Description
Qty
1
Top Panel
1
2
Left Side Panel
1
3
Right Side Panel
1
4
Bottom Panel
1
5
Back Stretcher
1
6
Back Panel
1
•
Some of your favourite bubbly or your preferred relaxant
7
French Cleat for Cabinet
2
•
Use the packaging carton as a working surface to prevent product damage during assembly
8
French Cleat for Wall
2
•
Phillips head screwdriver
9
Drawer Front
1
•
Drill
•
1/4” Drill bit or 5/16” drill bit
10
Drawer Left Side
1
11
Drawer Right Side
1
12
Drawer Back
1
13
Drawer Bottom
1
Weight Limitation
33
lbs for top
11
lbs for drawer
Toll-free at 1-866-619-1004 Help@nathanjames.com Nathanjames.com/help
Scan me! Free Lifetime Warranty
2
The goods
7 1
7 8 8
3 6
5 2
4
11
12
13
10
9
IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Please use hand tools for assembly. Do not over tighten screws and bolts to avoid stripping. 3
What’s included Description
Qty
A
M6*35mm Cam Bolt
18
B
15x9.5mm Cam Lock
18
C
M6*30mm Wooden Dowel
12
D
M4*30mm Screw
8
E
M3*12mm Screw
8
F
Left Side Panel Slider (CL)
1
F
Right Side Panel Slider (CR)
1
F
Right Side Drawer Slider (DR)
1
F
Left Side Drawer Slider (DL)
1
G
M4*50mm Screw (for Non-Drywall anchor)
4
H
M6*30mm Anchor for Non-Drywall
4
I
Drywall Anchor
4
J
M4*70mm Screw (for drywall anchor)
4
K
PVC Sticker
4
L
Mounting Installation Template
1
4
The goods
A 6
F 6
H 6
B 6
(CL)
F 6
C 6
(CR)
F 6
J
6I
5
D 6
(DR)
6F
K
E 6
(DL)
G 6
L
Step 1 Let’s get this thing fired up! Lay down packaging carton or use carpet as a working surface. We apologize in advance for how sore your hands might get after these instructions. But, it’ll be worth it!
A
A A
A
A
A A
A A
A
1
2
A
A A A
A 9
3
6
Step 2 D
Attach the Drawer Left Side (10) and Drawer Right Side (11) to the Drawer Back (12).
D
11 12
D 10
D
Step 3 To finish up the drawer, slide in the Drawer Bottom (13). Then attach the Drawer Front (9) using the 15*9.5mm Cam Locks (B) to secure in place. See the following page for instructions on how to use cam locks.
B
11
10
13 B
7
9 B
8
Step 4 Get those Drawer Sliders out and let’s finish this drawer! Tip from a friend to a friend: pay careful attention that your sliders are on the correct way - look for the DR and DL markers!
E E E E
F (DL)
F (DR)
13
9
9
Step 5 This graphic looks intense, but trust us, it’s easy! Secure the Left Side Panel Slider F(CL) and Right Side Panel Slider F(CR) to the (you guessed it!) Left and Right Side Panels.
E
E
Back
E
E
E E
Front
C
F (CL)
x2
3 E E
Front
C Back
10
F (CR)
x2
Step 6 I know we’re only on Step 6 out of 16, but we feel like now would be a good time to take a snack break. There’s nothing worse than furniture building and being hangry. Once you’re back, secure the Back Stretcher (5) to the Right Side Panel (3).
B C C 5 6
C
11
C
3 6
Step 7 Take what you’ve built so far from Step 6 and attach the Bottom Panel (4). Don’t forget to cover the Cam Locks (B) with the PVC Stickers (K)!
K
3 6
C C B C
K
4 6
B C
12
K
Step 8 Attach the Left Side Panel (2) and continue placing the PVC Stickers (K) over the Cam Locks (B).
K
4 6
B B
K
B
K
2 6
13
Step 9 Slide on the Back Panel (6).
6
5 6
2 6
14
Step 10 Secure the Top Panel (1).
1 6
B B B B
2 6
15
Step 11 Turn the unit around and secure the French Cleat for Cabinet (7) pieces by lining up the Cam Bolts and Cam Locks and tightening.
1 6
B
3 6
16
Step 12 Reach in the back and secure the Back Stretcher (5) with the M4*30mm Screws (D). How’s that snack tasting? We hope it’s giving you enough energy to complete 4 more steps!
5
D D
17
Step 13: Using the Mounting Installation Template Unroll it Unroll the paper Mounting Installation Template (L) and remove the adhesive backing at the corners.
Place it Locate where you would like to mount the side table and apply the Mounting Installation Template (L) to the wall in that location. Make sure the template and holes are level.
Mark it Using the holes in the template and the metal rail as a guide, mark the location of each hole on your wall. These will become your guides as to where to drill holes for the wall anchors.
Remove it Slowly remove the paper, ensuring that all holes have been marked.
Drill it Drill each hole to the suggested size. Important Note: Non-drywall = 1/4” drill bit Drywall = 5/16” drill bit 18
Step 13: Non-drywall At one point, you may find this step tricky, but it’s worth the 20 second meltdown— because everything will look SO clean at the end…you’ll forget all about the assembly! Skip to Page 20 if you have drywall.
Wall 8 6
mm
3m
mm
65
16
m
65
H G
H G
8 6
19
Step 13 (cont.) Non-drywall application Mark it
m 3m
Choose your desired location on the wall and use a pencil to mark where the anchors will go.
mm
65
8 6
1/4” Drill bit Following the marks you just made, with a 1/4” drill bit, drill 4 holes into the wall.
Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
20
16
mm 65
8 6
Step 13: Drywall
Wall 8 6
m 5m
mm
mm
65
6
I
3 16
J
I J
8 6
21
Step 13 (cont.) Drywall application mm
Mark it
m 5m
Choose your desired location on the wall and use a pencil to mark where the anchors will go.
6
8 6
5/16” Drill bit Following the marks you just made, with a 5/16” drill bit, drill 4 holes into the wall.
Insert the anchors Go ahead and tap the wall anchors into place in the new holes that you just drilled. If you’re feeling strong, just go ahead and push it in.
22
m
1
m 63
65
8 6
Step 13 (cont.) How to use drywall anchors
1. Drill hole with 5/16” bit
2. Pinch and insert
3. Begin tightening
4. Tighten to 100%
23
Step 14 Now that the wall is prepped, line up the French Cleat for the Cabinet with the French Cleat for the Wall and set your floating shelf on the wall.
Wall
24
Step 15 Before you start placing your chips and salsa on the tabletop, please finish securing the table to the wall using the M4*30mm Screws (D).
Wall
D D
25
Step 16 This may be our favorite step of all (because it’s the last step!). Line up the drawer sliders and carefully push your drawer in. Okay, now you can place your chips and salsa on top!
26
No heartburn, when we handle the return Give us a call 1-866-619-1004 or shoot us a message at help@nathanjames.com we will issue you a free replacement with zero hassle.
Our way
Their way
Give us a call
Re-package item
Replacement
Schedule pick up
You
Track package Replacement You
We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.
27
Safety first, fun later We want your Jackson Side Table to last as long as possible, so we recommend that you tighten the screws 2 weeks after assembly and for added safety check the tightness of all screws every 2 months. For proper care and treatment of wood please check our website at NathanJames.com/products
Safe use of this product starts with you.
Do not modify the structure of this product in any way.
Use this side table responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which NJ will not be responsible for.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.
Proper use
DO NOT
use for commercial purposes
DO NOT
climb on side table
DO NOT
exceed weight limit
DO NOT
leave spilled liquid on side table
DO NOT
use if table is damaged or broken
DO NOT
make temporary repairs
DO NOT
use outdoors
28
We are only in business if you’re happy For starters, thanks for being you. Toll-free at 1-866-619-1004 Help@nathanjames.com NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen—as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love! If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon Founder, Nathan James
29