Tubing Pneumatic Hose >>SuperBraid<<® PU Self-Storing Air Hose Fittings Product Features • Super flexible - 100% kink proof • Easy to handle - 29% lighter weight than equivalent thermoplastic products and 63% less than equivalent rubber air hoses Ball Valves • Tight bend radius minimizes space requirements • Inner tube, braiding & outer cover will not separate • Quick in-the-field repairs can be made with commercially available hose barbs and clamps – no special kits are needed • Extremely tough and abrasion resistant Filter, Regulator & Lubricator • Rugged brass swivel fittings provide long life & minimal flow restrictions • State-of-the-art strain relief system protects the hose and increases its maneuverability • Low tension retractability - minimizes user fatigue • Abrasion resistant • Soft Polyurethane material will not mar finishes • Strong enough to repel most oils and chemicals • 8" tail on the supply end makes the connection to the air source easy The >>SUPERBRAID<<® Self-Storing Air Hose is made from tough Polyurethane with Polyester Braiding for additional reinforcement. Most other hoses consist of an inner tube, braiding and an outer cover that eventually loses adhesion due to the bending, flexing, expansion and contraction occuring during normal use. This separation of the layers is the most common cause for hose failure. Unlike these other hoses, we manufacture >>SUPERBRAID<< in a way that the inner tube, braiding and outer cover cannot separate. This means that >>SUPERBRAID<< will not break down and its integrity is not compromised over time, assuring a long life of trouble free use! The >>Superbraid<< Hose is very lightweight. Our 3/8˝ x 50´ hose assembly (the most popular size) is more than 20% lighter than similar hose assemblies from other manufacturers so it’s easy to carry around, yet tough enough to resist the abuse of severe applications. >>SUPERBRAID<< features rugged fittings made from corrosion resistant brass that will withstand the roughest treatment. Our contemporary looking, state-of-the-art strain relief sleeve protects the hose at its weakest point (at the barb) and also enhances the appearance of the entire assembly. While other manufacturers use a strain relief that limits the ability of the hose to bend, ours was uniquely designed to take advantage of Polyurethane’s flexibility, giving the user a much wider range of motion without the possibility of kinking. Technical Blow Gun/Access. Couplers Hose • 16" tail on the working (tool) end eliminates tangling of the tool with the coils >>Superbraid<<® is manufactured in a way that the inner tube, braiding and outer cover cannot come apart. This means that >>Superbraid<< will not break down and its integrity is not compromised over time, assuring a long life of trouble free use. E-4 www.TheCatalogRoom.com Purchase at: www.eMurdock.com Catalog 4640 www.nycoil.com