Material Data Sheet Technical Customer Service, Holmestrand
EN AW-3005 Also known as EN AW-Al Mn1Mg0.5 [AA 3005] Coil and sheet for packaging, general engineering and architectural purposes
Chemical composition (in weight-%); acc. to EN 573-3 Element
Si
Fe
Cu
Min. Max.
0.6
0.7
0.30
Mn
Mg
1.0
0.20
1.5
0.6
Cr
Zn
Ti
0.10
0.25
0.10
Other
Others
(each)
(total)
0.05
0.15
Physical Properties (typical values) Linear Density (g/cm3)
Elastic
Shear
Modulus
Modulus
(GPa)
(GPa)
Poisson’s ratio
Spec. Heat
Melting
thermal
Thermal
Electrical
Capacity
Point
expansion
Conductivity
Conductivity
(J/gK)
(°C)
(20 –100°C)
(W/cmK)
(%IACS)
1,60
42
A50
10-6 m/°C 2,73
69.5
26.2
0.33
0.890
635 - 655
23.1
Rp0,2
Rm
A50
(MPa)
(MPa)
(%)
0
Min. 45
115-165
Min. 12
H12
Min.125
145-195
Min. 3
H14
Min. 150
170-215
H16
Min. 175
195-240
H18
Min. 200
Min. 220
H22
Min. 110
H24
Min. 130
Temper
Rp0,2
Rm
(MPa)
(MPa)
(%)
H26
Min. 160
195-240
Min. 3
H28
Min. 190
Min. 220
Min. 2
Min. 1
H41
Min. 80
130-180
Min. 7
Min. 1
H42
Min. 95
140-195
Min. 5
Min. 1
H44
Min. 135
165-215
Min. 3
145-195
Min. 5
H46
Min. 160
185-240
Min. 2
170-215
Min. 4
H48
Min. 180
Min. 210
Min. 1
Temper
Waiver This data sheet may only be considered as a general information of the properties which the described material normally could have. However, we hereby waive any liability or warranty that the particular products delivered to Hydro’s customer will show such properties. A binding liability or warranty with regard to specific properties of a product to be delivered by Hydro is subject to an individual specification to be agreed by Hydro and Hydro’s customer as part of an individual delivery order or delivery agreement for certain products.
1/1
MDS_004, Version June 2022
Mechanical Properties (static); acc. to EN 485-2 (Mill Finish), EN 1396 (Coated)