Christmas craft:
Gingerbread House Terracotta Pot Ornament
eed What you’ll n
Terracotta Plant Pots
Fine POSCA Markers
SH9802
UM300
Christmas Jingle Bells
Crystal Clear
SH9475
MD025
Assorted Christmas Ribbons 1
Lightly draw your design onto the terracotta pot with a lead pencil – white snow around the rim and fallen snow coming down around the top edges, a little door, candy canes, gum drops, lollies etc. as desired.
2
TOP TIP Further personalise your decoration with embellishments, glitter or writing as desired.
4
6
Feed both loose ends through the hole at the top of the pot, trapping the Jingle Bell on top.
7
U se strong tape or glue to adhere the loose ribbon ends to the inside of the pot.
Use the colourful POSCA paint markers to fill in the brightly coloured details, letting your pencil markings guide your art and set aside to dry.
Cut a 20cm length of Christmas Ribbon, form a loop and push the two loose ends through the Jingle Bell.
Use the white POSCA paint marker to fill in the large white snow areas.
3
5
8
Done! Your perfect Gingerbread House Terracotta Pot Ornament is ready.
Apply a layer of Crystal Clear to the entire surface of the pot to provide a permanent barrier to moisture and wear & tear and set aside to dry. 1773
CS9207
Copyright All rights rights reserved reserved Copyright© ©Modern Modern Teaching Teaching Aids. Aids. All
teaching.com.au | teaching.co.nz