1/3
SS 509
eduard
Su-27SM Flanker B interior S.A. 1/72 scale detail set for Zvezda 7295 kit • sada detailů pro model 1/72 Zvezda 7295
SS 509
APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT
BEND OHNOUT
GRIND OBROUSIT
?
REPLACE NAHRADIT
DRILL HOLE VRTAT OTVOR
ORIGINAL KIT PARTS PŮVODNÍ DÍLY STAVEBNICE
OPTION VOLBA
1
COLORED ETCHED PARTS LEPTANÉ BAREVNÉ DÍLY
1
ETCHED PARTS LEPTANÉ NEBAREVNÉ DÍLY
1
ORIGINAL KIT PARTS PŮVODNÍ DÍLY STAVEBNICE
PARTS TO BE REMOVED DÍLY K ODSTRANĚNÍ
PHOTO-ETCHED PARTS LEPTANÉ DÍLY
FILL TMELIT
37
34
D2 11
A19
40
B56
39 14
15 7
B22
18
1
2
A19
9 8 33
10
20 12
A1
Fuselage
5
3 B45
13
8
6
2/3
SS 509
D5
? 19 36
D8
E6
plastic = 0,8mm l = 2mm
38
30
27
Film
D3 25
35
D3 21
C10
22
28
Fuselage
33 29 20
24
23 16
32
26
E2 A1, B33
2 pcs. 17
B7
B8
4
B32 31 31
D10
© EDUARD M.A. 2014
www.eduard.com
Made in Czech Republic
3/3
SS 509
PARTS WITH GLUE
DÍLY OPATŘENÉ LEPIDLEM
3. Do not touch the adhesive areas of the etched components. 1. Separate the etched components from their frames on the 3. Nesahejte na části dílů, na kterých je naneseno lepidlo. protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddělujte od rámečku na podkladovém papíře. Po oddělení je sejměte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive.
4. Samolepící díly berte za hrany nebo za části, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an 5. Díl lehce položte do pozice, ve které má být nalepen. unwanted surface. Attempts to remove will result in Upravte přesnou pozici a přimáčkněte. Díl dokonale přilne damage to your part. až po přimáčknutí, před přimáčknutím lze dílem opatrně 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem přilepíte, při pokusu o odlepení dojde k poškození dílu.
manipulovat.