1/3
SS 368
eduard
Mi-24V Hind E interior S.A. 1/72 scale detail set for ZVEZDA •sada detailù pro model 1/72 ZVEZDA
SS368
film
APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PØED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT
BEND OHNOUT
GRIND OBROUSIT
OPTION VOLBA
?
REPLACE NAHRADIT
DRILL HOLE VRTAT OTVOR
ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE
PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ
PHOTO-ETCHED PARTS LEPTANÉ DÍLY
FILL TMELIT
19
20
35
19 A46
A46
23
6
27
A26
26
8
5
47
A47
35
23 7 21 22 C7 8 5
12
33
18 13
31
2/3
SS 368
16
36 C3 45 41 4
decal 5
10 E1
43
instrument panel
14 49 24
C28 A47 (rear seat)
15
F6
film 9 50 C29 11
25
44 F62
C25
32 instrument panel C30
2
34
decal 3
C25
1
F66
38
?
decal 4
E2
C18
E1, E2
17 39 decal 2
3
E6
46 A46 (front seat)
3/3
SS 368
30
30
29
37 29
29
42 D3
40
28
F63
30
A45 40
48
ball pen
29
42 37
30
PARTS WITH GLUE
D1
DÍLY OPATØENÉ LEPIDLEM 3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
© EDUARD M.A. 2011
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.
www.eduard.com
Made in Czech Republic