1/2
FE676
eduard
L-29 Delfín interior S.A. 1/48 scale detail set for AMK kit •sada detailů pro model AMK 1/48
FE676
ORIGINAL KIT PARTS PŮVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTS LEPTANÉ DÍLY
?
SYMETRICAL ASSEMBLY ´ SYMETRICKÁ MONTÁZ REMOVE ODSTRANIT BEND OHNOUT REPLACE NAHRADIT GRIND OBROUSIT OPTION VOLBA
1
COLORED ETCHED PARTS LEPTANÉ BAREVNÉ DÍLY
PARTS TO BE REMOVED DÍLY K ODSTRANĚNÍ
FILL TMELIT
C4, C7, C13, C18, C19 2 pcs.
4
A17
5
6 3 7
? 40
31
24
8
A14 41
10
21 25
35 11
37
21 35
29
36
19
A16
22 2
A15
42
1 12
? 30
39
27 42
For further detail sets look for eduard 48 801 L-29 Delfín exterior (not included in this set)
2/2
FE676
2 pcs. 13
34 32
C16
15
2 pcs. 13
33 18
38
9
23
17
14
20
33 26
18
A20 =
17
28
20
A19
16
PARTS WITH GLUE
DÍLY OPATŘENÉ LEPIDLEM 3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na části dílů, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddělujte od rámečku na podkladovém papíře. Po oddělení je sejměte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepící díly berte za hrany nebo za části, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will be permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem přilepíte, při pokusu o odlepení dojde k poškození dílu.
Eduard M.A. © 2014
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte přesnou pozici a přimáčkněte. Díl dokonale přilne až po přimáčknutí, před přimáčknutím lze dílem opatrně manipulovat.
www.eduard.com
Made in Czech Republic