1/2
49 587
eduard
MiG-21BIS interior S.A.
49 587
1/48 scale detail set for Eduard kit • sada detailù pro model 1/48 Eduard
APPLY EXPRESS MASK AND PAINT BEFORE GLUING POUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM SYMETRICAL ASSEMBLY SYMETRICKÁ MONTÁŽ REMOVE ODSTRANIT
BEND OHNOUT
GRIND OBROUSIT
OPTION VOLBA
?
REPLACE NAHRADIT
DRILL HOLE VRTAT OTVOR
ORIGINAL KIT PARTS PÙVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTS LEPTANÉ DÍLY
PARTS TO BE REMOVED DÍLY K ODSTRANÌNÍ
FILL TMELIT
13 12
D66
A18
D66
A1
15
17 27
28
G18
14
5
16 6 4
7
8
D88
18
9
30
24
24 30
D74
26
G11
D73 34
D54
2/2
49 587
2 31
1
32
22
25 29 3
20
23
33
19 21
10
G14
11
G14 G14
PARTS WITH GLUE
DÍLY OPATØENÉ LEPIDLEM 3. Do not touch the adhesive areas of the etched components.
3. Nesahejte na èásti dílù, na kterých je naneseno lepidlo.
1. Separate the etched components from their frames on the protective paper. Removal from the paper is done only after separation of the parts from the frames.
1.Samolepící díly oddìlujte od rámeèku na podkladovém papíøe. Po oddìlení je sejmìte z krycího papíru.
4. Hold the parts by the edges, or at areas free of adhesive. 4. Samolepící díly berte za hrany nebo za èásti, na kterých není nanesené lepidlo.
5. Lightly place the component in the desired location and position. Adjust as required. The component will by permanently affixed when pressed onto its intended location, its location can be adjusted.
2. Do not inadvertently place etched componets on an unwanted surface. Attempts to remove will result in damage to your part. 2. Nepokládejte samolepící díly na volné plochy. Pokud je omylem pøilepíte, pøi pokusu o odlepení dojde k poškození dílu.
© EDUARD M.A. 2011
5. Díl lehce položte do pozice, ve které má být nalepen. Upravte pøesnou pozici a pøimáèknìte. Díl dokonale pøilne až po pøimáèknutí, pøed pøimáèknutím lze dílem opatrnì manipulovat.
www.eduard.com
Made in Czech Republic