PowerTech Combo Sets
One Kit - Up to 20 Engines
PowerTech Set - ALPHA
PMXPWT200PRO
• Ford: Gas 4.2, 4.6/5.4 V8, 6.8 V10
Diesel 6.0/6.4L
• Dodge: 5.7/6.1L HEMI
• GM LS: 4.8/5.3/6.0/6.2L V8
PowerTech Set - CHARLIE
PMXPWT220PRO
•Ford: Gas 4.2, 4.6/5.4,6.8L
Diesel 6.0/6.4L
•Dodge: 5.7/6.1L HEMI
•GM LS: 1999-Current
4.8/5.3/5.7/6.0/6.2L
PowerTech Set - BRAVO
PMXPWT210PRO
• Ford: Gas 4.2, 4.6/5.4 V8, 6.8 V10
Diesel 6.0/6.4L
•Dodge: 5.7/6.1L HEMI
•GM LS: 4.8/5.3/6.0/6.2L V8
PowerTech Set - DELTA
PMXPWT230PRO
•GM LS: 1999 - Current 4.8/5.3/5.7/6.0/6.2L
• GM 2.2/2.4L
•GM 2.8/3.5/3.7/4.2L
Ford 3.5L EcoBoost Repair Kits
Part #: HL3Z9F593-B (Ford Transit, F-150, Navigator, and Explorer)
PMXPWA115PRO
Ford Fuel Injector Removal Adapter
Part #: BL3Z9F593-B DM5Z9F593-A K2GZ-9F593-A (Ford Transit, Focus, Fiesta, EcoSport, Ranger, Bronco, Edge) *PMXPHR106-6”SlideHammer
3.5L ECOBOOST INTAKE MANIFOLD BOLT REPAIR PMXIMR300PRO
These adapters are perfect for repairs that require a high level of force, making them an ideal tool for auto body repairs and various applications. Whether you need to pop out cotter pins, pull bushings, seals, or tackle other tough tasks, the PlierPull is here to meet your needs.
*LOCKING PLIERS NOT INCLUDED
Adapter & Slide Hammer
PMXPWP330PRO | PMXPWP380PRO | PMXPWP440PRO
*LOCKING PLIERS NOT INCLUDED
Adapter & Slide Hammer
PMXPWP330PRO | PMXPWP380PRO | PMXPWP440PRO
4 PACK OF ADAPTERS ALSO AVAILABLE
PMXPWP-4PK
5/8” Adapter
PMXPWP630 (FOR SNAP-ON CJ2003A)
5/16” Adapter
PMXPWP330
3/8” Adapter
PMXPWP380
7/16” Adapter
PMXPWP440
GM Exhaust Manifold Repair
PMXM200PRO | PMXM200PROP
LS 1999-2013
PMXMIII200PRO | PMXMIII200PROP
LS 1999 - CURRENT
PMXH200PRO | PMXH200PROP
LS 2014 - CURRENT
PMXT300MSTR
GM 6.6L Duramax
PMXI200PRO GM 2.8/3.5/3.7/4.2L
Dodge/Jeep/Ram/Chrysler
Exhaust Manifold Repair
PMXA200PRO | PMXA200PROP HEMI 5.7/6.1L
PMXCD200PRO | PMXCD200PROP HEMI 6.4
PMXY200PRO | PMXY200PROP DODGE/JEEP 3.7/4.7L
PMXKDN200PRO | PMXKDN200PROP DODGE/JEEP 3.8L
PMXSRA200PRO | PMXSRA200PROP DODGE/JEEP 3.6L
Ford Broken Bolt Repair & More
PMXR200PRO | PMXR200PROP GAS 4.6/5.4/6.8L
PMXRII200PRO | PMXRII200PROP GAS 4.6/5.4/6.8L DSL 6.0/6.4L
PMXEII200PRO | PMXEII200PROP 3.5L ECOBOOST
PMXTRN200PRO 4.0L EXPLORER
PMXNIC200PRO 1.6L ECOBOOST
PMXG300PRO 6.2L V8 GAS
Ford 6.7L Power Stroke Repair Solutions
PMXO200PRO | O200PROP
FUEL INJ. HOLD DOWN BOLT
PMXN200PRO | N200PROP | N200PLT
EGR TUBE MOUNTING BOLT
PMXPWP200PROP
FUEL INJ. PULLER
PMXP200PRO
EXHAUST MANIFOLD
PMXRBY300PRO | RBY300PROP
FUEL INJ. SEAT REPAIR
PMXRBY350PRO
FUEL INJ. SEAT REPAIR
1/4” Ratchet Drill Adapter
The PowerDrill Threaded Bit Adapter attaches to any ¼” drive and accepts threaded shank machine drill bit tooling.
1/4” Ratchet Drill Adapter
Tooling Accessory Set
Converts any type of 1/4” drive ratchet, including electric, air, and hand, into a powerful high-torque hex screwdriver to reach limited access areas.
We know that a freshly drilled hole can create a bur upon entry of the bit. We took care of that problem by including a threaded chamfer bit to eliminate the burr.
1/4” Ratchet Hex Adapter
Converts any type of 1/4” drive ratchet, including electric, air, and hand, into a powerful high-torque hex screwdriver to reach limited access areas.
Ford/Subaru Wheel Bearing Puller
FORD: PMXTOM400PRO | TOM400PROP
SUBARU: PMXTOM410PRO | TOM410PROP
COMBO: PMXTOM450PRO | TOM450PROP
TOMMY Rail
PMXTMR100D
ProMAXX® designed TOMMY RAIL to provide technicians with even more pulling power to address the most stubborn wheel bearings.
Tesla Wheel Bearing Puller
PMXTOM460PRO | PMXTOM460PROP
The NEW Tommy Tesla Wheel Bearing Puller is the industry’s most efficient tool when it comes to stubborn wheel bearing hubs. Tommy allows techs working on EVs to pull the wheel bearing in seconds on Tesla Model S and Tesla Model X Electric Vehicles.
Works on Tesla Models S & X
BULLIT ProKit
PMXUISX310PP
PMXU300PRO-10MM-150
PMXPEKMSTR - Master Enhancement Kit
BULLIT® was engineered to address broken bolts, including exhaust manifold bolts, in almost any engine. From 4, 6, 8, 10, and even up to 12-cylinder engines. Oil pans,water pumps, intake manifolds, BULLIT® is adaptable to fit any linear bolt pattern perfectly. Built to service virtually anything including import engines and vintage engines.
One Kit - Nearly Limitless Possibilities
Any linear bolt patterns - MOST VERSATILE! 8MM, 10MM, 3/8”, 12MM
• Hino (Class 6 & 7)
• Mack MP8, MP7, MP8HE
• Volvo D13, D12, SC90, 560, D5, S90, 540
• Detroit Diesel DD13-16, Legacy
• Cummins 6.7L, ISL, ISL9, ISL12, X15, X12, L9, 5.9L, ISX (ISX Pieces)
• International DT466
• MaxForce, N-Series, A-26, CNG
• Navistar
• Peterbilt
• Kenworth
• Freightliner
• CAT
• GM Duramax
• International 365
• Dodge/Chrysler
• CNG - Compressed Natural Gas
• John Deere
• Kubota
• Paccar MX11-12 & Paccar PX-7, 9
• Case
• Komatsu
• Power Stroke 6.0/6.4L
PowerDrill Prokit
• Variable speed up to 2800 RPM.
• 360 degree rotatable head.
• Three pack threaded drill bits includes PMXPSSC125, 188, & 266.
• Ball bearing construction for long life.
Ford 6.7L Power Stroke
FORD 6.7L POWER STROKE
BROKEN FUEL INJ. BOLT REPAIR
PMXO200PRO | PMXO200PROP
FORD 6.7L POWER STROKE
FUEL INJECTOR PULLER
PMXPWP200PROP
FORD 6.7L POWER STROKE
FUEL INJECTOR SEAT REPAIR
PMXRBY300PROP
Repair Solutions
(PMXPPS006012B)
FORD 6.7L POWER STROKE DIESEL EGR REPAIR KIT
PMXN200PRO | PMXN200PROP
The NEW PWP200 puller also incorporates an 8mm dimple to accommodate an air-hammer powered punch for quick removal of the most stubborn injector.
The NEW PWP910BSE puller works on Dodge/ Fiat 3.0L V6 fuel injectors. Unlike other fuel injector removers that currently exist, this one does not need to be bolted and unbolted. Simply slide it on after placing the pad and pull the injector off in no time.
The lift kit delivers the speed because it does not require techs to waste time bolting and unbolting to the cylinder head like other devices in the market.
REVERSE APPLICATION
• The most effective tool to remove most severely seized injectors, front and rear, no need to remove the cab.
• WORLDS 1ST BI-DIRECTIONAL AIR-HAMMER POWERED FUEL INJECTOR PULLER!
• Professional machine grade quality
Fuel Injector Puller For Ford 6.7l Power Stroke:
PMXPWP900BPRO
Fuel Injector Puller
For Dodge/Fiat:
PMXPWP910PRO
Fuel Injector Pullers
For Gm Duramax:
PMXPWP920PRO - (L5P/L5D)
PMXADP921 - (LLY/LBZ/LMM)
PMXADP922 - (LGH/LML)
FORWARD APPLICATION
ROBBY PROKIT PLUS
Ford Power Stroke 6.7L Fuel
Injector Copper Compression
Seal Seat Repair Service Kit
PMXRBY350PRO
• Removes stuck injectors twice as fast as other tools, without the need to bolt and unbolt from the cylinder heads.
• Reduces shop time by 50%, allowing technicians to service more vehicles.
• Ensures accuracy without sacrificing speed, adapting perfectly to the cylinder head depth extractor punch.
NINO/NICO COMBO KIT
Ford 6.7L Power Stroke
Diesel EGR Tube & Fuel Injector Broken Bolts
• Eliminates removal of the intake, turbo, & exhaust manifold for a quick 45-minute and easy repair vs an 8-hour replacement.
• Repair one or both EGR tube bolts simultaneously .
• Expandable flange for solid rigid mounting maintaining perfect alignment vs set cheap set screw extractor punch.
AIRSTRIKE AIRSTRIKE
BI-DIRECTIONAL AIR HAMMER
Designed to work with the Kentucky Kicker Punch Set (LT855A)
Blows Per Minute – 3000 BPM
Bore Diameter – 3/4” (19mm)
Piston Stroke – 2-1/2”(63mm)
Air Inlet – 1/4” NPT
Minimum Hose Size – 3/8”
Rec. Air Pressure – 90PSI
Sound Power Level – 98dB
Weight – 1.93KGS
Length – 195mm
Versatile Bi-Directional Air Hammer: The AirStrike is the first 3,000 BPM bi-directional air tool on the market.
Precision Control: Featuring an adjustable brass air regulator, this air hammer allows users to fine-tune power for greater precision and shorter strokes.
Pneumatic Puller: The AirStrike lets you convert from a hammer to a powerful puller by inserting the piston air lock cylinder, ideal for removing seals, injectors, axles, & more with ease.
LT955AH
LINE WRENCH SET CROWS FOOT SET
LT1900XL 16-Pc. SAE
LT1910XL 16-Pc. Metric
LT1920XL 16-Pc. SAE
LT1930XL 16-Pc. Metric
SHOCKIT™ Diesel NOx & Particulate Sensor Removal
LT996D
Remove even the most stubborn diesel exhaust sensors with the Shockit™
Socket Diesel NOx and Particulate Sensor Removal Kit. This kit utilizes the force and vibration of an air hammer to loosen the most rusted sensors.
SHOCKIT™ 3-Pc. Punch Set
LT1910PK
SHOCKIT™ O2
Sensor Removal Kit
LT994
Access, loosen, and easily remove frozen and obstructed 22mm O2 sensors and diesel NOx sensors. Works when ratchets, wrenches and regular sockets don’t fit. Hypersonic vibration eliminates thread galling. No more catalytic converter removal or dropping motor mounts.
SHOCKIT™ Socket Sets
Loosens fittings on steering, brake, AC & fuel systems. No more subframe removal when working on steering rack hydraulic fittings or heat shield removal when working on ABS brake module hydraulic fittings. Hyper sonic vibration eliminates thread galling.
Line Wrench:
LT1900 10-Pc. SAE
LT1910 10-Pc. Metric
Crows Foot:
LT1920 13-Pc. SAE
LT1930 12-Pc. Metric
Fastener Remover
Hypersonic vibration eliminates thread galling. Square Drive Plug
Breaker Bar allows breaker bar and air hammer simultaneous operation. Low Profile Drive Plug allows for use in tight spaces with an air hammer.
SHOCKIT™
O2
Sensor
Removal Kit - EVA Foam
• Equipped with a non-slip, selfcentering air hammer angled punch, this kit ensures accurate sensor removal, even in tight or limited access spaces.
SHOCKIT™ Open End
Socket Sets
Line Wrench: LT1935FM 20-Pc. Crows Foot: LT1915FM 20-Pc.
• Uses harmonic vibration to quickly and effectively loosen stuck/frozen fasteners.
LT994FM LT1940-MASTERF
SHOCKIT™ Master Set Kentucky Kicker Driver
• Equipped with a non-slip, selfcentering air hammer angled punch, this kit ensures accurate sensor removal, even in tight or limited access spaces.
SHOCKIT™ 3-Pc. Punch Set in EVA FOAM
LT1910PKF
SHOCKIT™ Kentucky Kicker 3/8” Driver Kit in EVA Foam
LT1940-3/8F
Easily convert any 3/8” drive impact socket into a SHOCKIT™ socket. This feature allows for a versatile solution when using various sockets, enhancing compatibility across tool sets.
SHOCKIT™
Kentucky Kicker 1/2” Driver Kit in EVA Foam
LT1940-1/2F
Compatible with 1/2” drive impact sockets, turning them into SHOCKIT™ Sockets for versatile usage across various mechanical tasks.
SHOCKIT™
Kentucky Kicker
3/4” Driver Kit in HD EVA
LT1940-3/4F
Converts any 3/4” drive impact socket into a SHOCKIT™ Socket, increasing versatility and compatibility across multiple mechanical applications.
7-Pc. Lug Ripper II
Lug Nut Drill-Out Kit
LT1350
• Drill out lug nut threads and wheel studs in under 11 minutes, eliminating the need for torching frozen or damaged lug nuts.
• 16mm Step Up Cobalt Drill Bit offers superior durability and cutting efficiency for quicker.
3-Pc. E-Z
Open Lockout Kit
LT148
4-Pc. 1/2” Drive Dual Sided Socket Lug Nut Removal Kit w/Punch
LT4240
• Removes damaged/distorted lug nuts with steel caps.
• Dual flip 1/2” drive impact socket design.
• Includes 21/21.5mm, 18.5/19.5mm, 22/22.5mm Chrome Cap Busters and an extractor punch.
• Three Multi-Piece Rods: Designed for easy storage and flexibility in use.
• Super Strong 1/4″ Connector Sleeve: Ensures secure and reliable connections.
• Whale Tip Design: Enhanced tips for better engagement with lock surfaces.
• Vinyl Storage Case: Includes a durable case for convenient storage and transport.
Transmission Popper LT2650
• The KCT2650 shifts transmissions into neutral from under hood with no key.
• Use pry bar fork end to separate transmission shift cable from transmission selector gear.
• Two tools in on: use fork end of tool to pop out body panel grommets.
Universal Wheel Bearing Hub Shocker Tool Kit LT830A
• Safely remove all frozen hubs instantly without damaging the axle.
• Universal fit mounts to all axle bolted hubs - 5, 6 & 8 lug hubs.
• Mounts to two studs using the supplied flanged in nuts in seconds.
• Use with 5 lb, hammer to knock frozen hubs out of axles.
17-Pc. Foreign & Domestic Brake Caliper Socket Kit
• Increase applications for most domestic as well as foreign vehicle brake calipers.
• Most car brake caliper bit/sockets when you need them.
• Individual parts for KCT4995 are available as needed.
7-Pc. 1/2-Inch Drive
Flip Socket Set
LT1237
• For Standard, or Damaged Capped/Clad Lug Nuts.
• Contains 6 two-sided sockets saving you the need to buy 12 individual sockets.
• Each socket provides a standard size & a half size to remove damaged lug nuts.
• Allows access to tight spaces with chamfered edges for easy engagement.
10-Pc. Wheel Hub
Master Rethread Kit
LT992
Reduces the need to replace a wheel stud or hub. Repairs most passenger cars and light commercial vehicles. Four different sizes of internal rethreader taps make quick work of damages bolt threads.
Texas Twister™ Air Hammer Pulling Kit LT855A
• Converts your air hammer into a pneumatic slide hammer.
• Safely pull axles, seals, bearings, pulleys, harmonic balancers, speed sensors and much more.
Heavy-Duty Truck
Brake Shoe Spring Tool
LT890
• Easily connects rear drum brake return springs.
• Easy one hand operation.
• Slotted ends on tool always hold spring at correct work angle.
Eaton Truck Brake Installer / Removal Spring Tool
Easy one hand operation.
Slotted ends on tool always hold spring at correct work angle.
No need to leverage tool against a solid surface during spring installation.
Universal fit for all Eaton air brake shoe anchor springs.
Brake Wheel Cylinder/ Fitting Rethreading Kit LT993
• Re-threads damaged brake wheel cylinders, master cylinder fittings, ABS control module fittings, and brake line fittings on vehicles.
• Works on vehicle where stand alone tap and dies won’t fit.
• Includes male/female rethread sockets in the most common sizes.
Hose Clamp Removal Pliers
LT998
• These hose clamp pliers reach around the hose to encapsulate the clamp compression tips.
• Allows the mechanic to easily rotate the clamp to a position where he can now use his clamp removal tool or remove clamp using our tool.
Shape Tip™ Tool
LT790
• Is designed to fit securely on most pry bars.
• Use to roll out high spots, creases, and crowns around dents.
• Accurately roll and massage out dents and distortions without leaving tool marks.
• Repair bumpers, glue upholstery, and patch tires.
SAE Thread Chaser Socket Set
LT999
Recondition threads on SAE high pressure male/female fittings.
Hollow end tap slides over flared end of line for easy re-threading female connector.
Compact design with pass through bored out center hole on each socket.
Ideal for gas, AC, and liquid high pressure fittings common in heavy equipment, trucking, marine, and aircraft industries.
Hatch Jammer XL STC17200
(Hatch Jammer and Xtension Tube)
Hatch Jammer STC17100 (Hatch Jammer)
Hatch Jammer Xtension Tube STC17150
• Easily adjust work angle to comfortable position
• Improves visibility of work area.
• J-hook attaches securely to striker and larger loop end hocks into hatch.
Pro Step Heavy Duty Stool
STC20350
• 500 lbs. weight capacity.
• Height adjustable from 6.5” to 22.5”
• Foam bumpers protect vehicle finish and spring-loaded retractable wheels.
Easy Pry Tools
STC21730
• Non-marring, won’t scratch paint.
• Removes bezels, moldings, trim, and panels easily.
• Great for removing weather stripping.
Sure Grip Trim Clip Pliers
• Grips the stem of the clip not the head to avoid breakage.
Lever action for faster, easier removal. Works on trim pads, hood insulation, etc.
E-Z Rest Door Hanger
STC21870
• Easy on/off design and fully adjustable.
• Quickly adapts to most floor jacks with removable saddles.
• Hang bumpers, store glass, and many other uses.
LED MIG LIGHT
STC23240
• Long lasting and durable LED Light.
• Plastic shield to protect LED.
• Attaches within seconds to any welding torch.
• Easy-to-use ON/OFF switch with auto shut-off after 30 minutes.
STC21725
BigEasy™ GLO w/ Case
STC32955DLX
• 55" Long
• Includes all the essential tools you need to handle various lockout scenarios, making it a complete and versatile solution.
Case Available Separately
STC32935
Allows BigEasy™ operator to open locked car by grasping door handles and window cranks.
Air Tool Oiler Dispenser
• Universal Solution - Works on all models of air hammers, air sanders, air ratchets, & air ratchet heads.
• Always Centered - Self-centering,non-drip, adjustable, oil dispenser head.
• Built Tough - Shatter-resistant oil reservoir.
Attach to any windshield surface to shine light on the interior of vehicles while unlocking them.
Open locked cars that require extra length to reach emergency floor release handles, keys in ignition, and opposite side door handles.
Pro Folding Parts Cart
STC35950
• Folding mast to allow dual side parts.
• Weighs 100 lbs and holds up to 396 lbs.
• Shelves flip down when technician is finished which allows for easy storage and nesting with other parts carts.
Inner Race Saver
STC71310
Panel Tree
STC35900
• Panels load easily and quickly.
• Center post design allows access to edge, bottom, and both sides of the panel.
• Paint panels, jambs, and car all at once.
• Save hours of dry time.
• Replace for $45-70 compared to $200-500.
• Takes 5 minutes vs 30-45 minutes.
• Safer and easier than other removal methods.
Spec-Out Nib Files
STC35250 | STC35260
• Removes runs and dirt nibs.
• Honed tips of teeth shave without digging in.
• Available in course or fine.
PURCHASE ALL 3 WEDGES IN ONE KIT WITH THE EASY WEDGE TRIO - STC32925
• Effortless Wedging - Uniquely shaped and durable construction makes wedging tasks a breeze. Featuring double welded seams.
• Wide Range of Applications - Auto repair, home improvement , construction, plumbing, electronics repair, HVAC, masonry, moving furniture, and many other uses.
• User-Friendly Design - Allows for easy handling and precise control during operation.
Ford F-150 Axle Repair Kit
PMXFRA500PRO
• Save Time by avoiding having to remove the axle from the vehicle.
• High Accuracy disk fits directly to hub and is adjustable to fit directly over the broken bolt to provide a stable surface.
• Highest Quality completely made in the USA with quality bits and taps to make the job even easier.
5-Pc. Clip Lifter Set
STC21470
• High Quality Finish - Boasts a chrome finish and high-polish surface.
• Versatile Applications - Ideal for plastic fenders, clips, upholstery, door panels, trim, and more.
• Variety of Offsets and Spreads - 5 different offsets to accommodate different tasks and offers 5mm, 7mm, and 13mm spreads.
EZPULL Pliers
• 2 large pulling rings for light pulling ( 2,000 lbs.)
• 1.5 inch ring for pulling vertical flanges.
Tie Rod End Pliers
• Save Time - Saves time by temporarily fixing wheel alignment for easy loading.
• User Friendly - Easily steer vehicles to the repair bay.
• Easiest Solution - Provides a secure grip that firmly holds tie rod ends in place.
Tie Rod Coupler
• Save Time - quick and straightforward installation.
• Super Secure - reliable connection between inner and outer tie rod ends.
Tire Inflator/Deflator
• Measures 6 to 100 PSI
• Back-lit LED display with auto shutoff.
• Reads PSI, kPa, and BAR
• Can be used on rear dual valves, motorcycles, cars, and many other tire types.
Digital Inflator & Pressure Gauge w/ 3-Pc. Air Chuck Set
#s-580eKIT Precision
• Most accurate tire inflator gauge available on the market.
• Display automatically adjusts for left or right hand use as well as horizontal or vertical display.
• Easy to read display in any light conditions.
3-in-1 Pro Analog Pistol Grip
Digital Tire Inflator Gauge
Measures 5 to 220 PSI
Grip chuck clip allows for quick connection.
Reads in PSI, BAR, kPa, or kg/cm2
Integrated hang hook allows for easy and safe storage.
Auto-Retract Hose Reel 1/2” x 50 ft. Rubber Hose
#2780-50D Steel Dual Arm
• Rugged, steel frame resists twisting and kinks better than a single arm reel design.
• Stays flexible in cold and resists cracking, abrasion, and chemicals.
• Designed for easy installation on and off of cel.
• Ranges from 0-160 PSI
Auto-Retract Hose Reel 1/2” x 50 ft. Rubber Hose
#2760-50D Steel Dual Arm
• Rugged, steel frame resists twisting and kinks better than a single arm reel design.
• Stays flexible in cold and resists cracking, abrasion, and chemicals.
• Designed for easy installation on and off of cel.
• Ranges from 0-160 PSI
5 In ONE® Universal Coupler w/ Safety Exhaust
MALE #1750 FEMALE #1751
2-in-One Universal Safety Exhaust Industrial Coupler
Quick Disconnect #1773
• Accepts all major interchanges: M-Style, V-Style, T-Style, A-Style, and L-Style.
• Bumper sleeve protection defends the safety exhaust coupler from damage.
Pencil-Style Brake Pad Gauge
#941
• Reads from 0mm to 20mm.
• Color code makes reading super quick.
• Ideal for use on any vehicle; from standard to heavy-duty.
• Bumper sleeve protection defends the safety exhaust coupler from damage.
• Universal safety coupler accepts G-STYLE .125 and G-STYLE .37.
8-Piece Manual Brake Pad Gauge
#942
• Reads 2mm to 12mm.
• Gauges internal and external brake pad.
• Ideal for use on any vehicle; from standard to heavy-duty.
Variable Stroke Lever Grease Gun - 10,000 PSI
#s-3100
• Maximum pressure of 10,000 pounds per square inch.
• Includes 6” bent extension.
• Comes with a molded non-slip grip handle.
• Grease canisters or grease not included.
Pneumatic Grease Gun
#s-3103
• 4,800 pounds per square inch.
• Includes 6” bent steal extension and
• Pistol grip & acute angle design for
• Grease gun head fitted with bulk
AA Battery Powered Fuel Can Transfer Pump for Racing Style Fuel Cans
ZE1030XLD
• Simple Dispensing: Press the on button and watch dispensing begin. Press the off button to stop.
• Versatility: For use with gasoline, diesel, kerosene, light weight oils and non-potable water.
• Fast and Efficient delivery: Delivers at 2.4 Gallons Per Minute.
• Dispensing Hose Length – 52-inches
• Suction Hose Length – 22-inches
• Flow Rate: 2.4 GPM
• Runs on 4 x AA batteries (not included).
• Can run on 2 x AA batteries in the event of an emergency.
*can not included
AA Battery Powered Can Transfer Pump
ZE1030
• Simple Dispensing: Press the on button and watch dispensing begin. Press the off button to stop.
• Versatility: For use with gasoline, diesel, kerosene, light weight oils and non-potable water.
• Use with a Variety of Cans: The integrated threads work on the majority of the fuel cans in North America.
• Dispensing Hose Length – 39 inches
• Suction Hose Length – 18.5 inches
• Flow Rate: 2.4 GPM
• Runs on 4 x AA batteries (not included).
• Can run on 2 x AA batteries in the event of an emergency.
*can not included
AA Battery Powered Fuel Can Transfer Pump for Racing Style Fuel Cans
ZE1030XLD
• Simple Dispensing: Press the on button and watch dispensing begin. Press the off button to stop.
• Versatility: For use with gasoline, diesel, kerosene, light weight oils and non-potable water.
• Fast and Efficient delivery: Delivers at 2.4 Gallons Per Minute.
• Dispensing Hose Length – 52-inches
• Suction Hose Length – 22-inches
• Flow Rate: 2.4 GPM
• Runs on 4 x AA batteries (not included).
• Can run on 2 x AA batteries in the event of an emergency.
not included
AA Battery Powered Can Transfer Pump
ZE1030D
• Simple Dispensing: Press the on button and watch dispensing begin. Press the off button to stop.
• Versatility: For use with gasoline, diesel, kerosene, light weight oils and non-potable water.
• Use with a Variety of Cans: The integrated threads work on the majority of the fuel cans in North America.
• Dispensing Hose Length – 39 inches
• Suction Hose Length – 18.5 inches
• Flow Rate: 2.4 GPM
• Runs on 4 x AA batteries (not included).
• Can run on 2 x AA batteries in the event of an emergency.
not included
55-Gallon Portable Diesel Fueling Station
ZEFS-55S
Delivery rate of 10.5-Gallons Per Minute allows for fast and efficient dispensing.
Constructed of a rugged roto-molded polyethylene for added strength.
Lockable cover allows limited access and integrated strap recesses secure tank during transport.
55-Gallon Low-Profile Portable Diesel Fueling Station
ZEFS-55LP
• Delivery rate of 10.5-Gallons Per Minute allows for fast and efficient dispensing.
• Constructed of a rugged roto-molded polyethylene for added strength.
• Lockable cover allows limited access and integrated strap recesses secure tank during transport .
116-Gallon Portable Diesel Fueling Station
ZEFS-116
Delivery rate of 10.5-Gallons Per Minute allows for fast and efficient dispensing.
Constructed of a rugged roto-molded polyethylene for added strength.
Lockable cover allows limited access and integrated strap recesses secure tank during transport.
• New Hold-a-Rotor™ Tool (STC71000) is engineered to hold automotive and light truck disc brake rotors in place during repairs. Durable, ridged-polymer design fits most common 12MM and 14MM mounting studs, covers over 90 percent of domestic and European vehicles. Speed technician repair times during brake and wheel bearing jobs.
HoldaRotor
