Skip to main content

Dayton Superior • City White Cure J8

Page 1


HOJA DE DATOS TÉCNICOS

DESCRIPCIÓN

El City White Cure J8 es un compuesto de curado de concreto económico, que cumple con COV, a base de agua, con pigmentación blanca.

USO

Este curador que forma membrana está diseñado especialmente para curar cordones, cunetas, aceras y otros proyectos exteriores similares de concreto.

CARACTERÍSTICAS

A base de agua

Cumple con COV

Se limpia con agua

Pigmentos blancos para reflejar el calor del sol

PROPIEDADES

Tiempo de secado: Aproximadamente 2 horas a 70°F (21°C).

COV:

Menos de 100 g/L. Cumple con todas las normas COV de EE.UU. para los compuestos de curado de concreto, incluyendo EPA Federal, OTC, LADCO, SCAQMD y CARB.

GUÍA DE CÁLCULO

Tasa de cobertura: 200 pies2/gal. (4.9 m2/L)

EMPAQUE

ALMACENAMIENTO

El City White Cure J8 debe almacenarse en recipientes originales de fábrica herméticamente sellados. Almacene en posición horizontal para evitar la acumulación de humedad en la cabeza del tambo. Evite la exposición prolongada a la luz solar y/o el calor constante superior a 100°F (37.8°C). No permita que se congele. La vida útil de los recipientes correctamente almacenados y sin abrir es de 12 meses.

City White Cure J8

Compuesto para curado de Concreto

APLICACIÓN

Mezcla: El City White Cure J8 debe agitarse ligeramente antes de su uso. No agite en exceso ni use equipo de mezclado de alta velocidad.

Colocación: Aplique al concreto recién acabado en cuanto sea posible caminar sobre dicha superficie sin estropearla y en cuanto haya desaparecido toda el agua libre de la superficie. No se demore en aplicar el compuesto de curado. Use aerosol a baja presión, rodillo o brocha. No diluya. Aplique de manera uniforme sin permitir acumulaciones de material. Todos los equipos y herramientas de aplicación deben limpiarse a fondo antes de su uso para evitar la contaminación.

LIMPIEZA

Uso de herramientas y equipo: Mientras esté húmedo, use agua. Después de que se seque el producto, puede ser necesario el Limpiador Cítrico Citrus Cleaner J48 de Dayton Superior o solventes orgánicos como xileno para retirar el producto.

LIMITACIONES

El City White Cure J8 debe agitarse muy bien antes de su uso diario.

El City White Cure J8 no debe utilizarse en superficies a las que posteriormente se les aplicará pintura, losetas, boquilla, selladores u otros recubrimientos, a menos que se elimine por completo.

No se recomienda para uso en interiores.

No aplique el producto a temperaturas inferiores a 40°F (4°C). Las condiciones frescas y húmedas y/o la aplicación de cantidades excesivas pueden ampliar el tiempo de secado y disipación.

Solo para uso profesional.

Compuestos

City White Cure J8

Compuesto para Curado de Concreto

PRECAUCIONES

LEA LA HOJA MSDS ANTES DE USAR EL PRODUCTO

Use con ventilación adecuada.

Use ropa protectora, guantes y protección ocular (gafas, lentes de seguridad y/o careta)

Mantenga fuera del alcance de los niños

No ingiera

En caso de ingestión, acuda inmediatamente al médico

Puede causar irritación de la piel al hacer contacto con la misma, especialmente cuando dicho contacto es prolongado o reiterado. En caso de contacto con la piel, lave inmediatamente con agua y jabón y busque ayuda médica si es necesario.

En caso de contacto con los ojos, enjuague inmediatamente con agua limpia y busque ayuda médica si es necesario.

Disponga del material de desecho de acuerdo con los requerimientos federales, estatales y locales.

FABRICANTE

Dayton Superior Corporation 1125 Byers Road

Miamisburg, OH 45342

Servicio al Cliente: 888-977-9600

Servicios Técnicos: 866-329-8724

Sitio Web: www.daytonsuperior.com

GARANTÍA

Dayton Superior Corporation (“Dayton”) garantiza por 12 meses a partir de la fecha de fabricación o por la duración de la vida útil publicada del producto, lo que sea menor, que al momento del envío por parte de Dayton, el producto está libre de defectos de fabricación y satisface las propiedades del producto de Dayton en vigor en la fecha de aceptación del pedido por parte de Dayton. Dayton solo será responsable bajo esta garantía si el producto se ha aplicado, utilizado y almacenado conforme a las instrucciones de Dayton, en especial la preparación e instalación de superficies, en vigor en la fecha de aceptación del pedido por parte de Dayton. El comprador deberá examinar el producto al recibirlo y notificar rápidamente a Dayton por escrito de cualquier no conformidad antes de que el producto se utilice y, a más tardar 30 días después de que se haya descubierto dicha no conformidad por primera vez. Si Dayton, a su exclusiva discreción, determina que el producto ha violado esta garantía, a su exclusiva discreción reemplazará el producto no conforme, rembolsará el precio de compra o expedirá un crédito por la suma del precio de compra. Este es el único y exclusivo remedio en caso de incumplimiento de esta garantía. Solo un funcionario de Dayton está autorizado para modificar esta garantía. La información de esta hoja técnica reemplaza toda la demás información de ventas recibida por el cliente durante el proceso de venta. LA GARANTÍA ANTERIOR SERÁ EXCLUSIVA Y EN LUGAR DE CUALQUIER OTRA GARANTÍA, EXPRESA O IMPLÍCITA, INCLUIDAS LAS GARANTÍAS DE COMERCIALIZACIÓN E IDONEIDAD PARA UN PROPÓSITO PARTICULAR, Y TODAS LAS DEMÁS GARANTÍAS QUE SURJAN POR APLICACIÓN DE LA LEY, TRANSACCIÓN, COSTUMBRE, COMERCIO O POR OTRO MOTIVO.

Dayton no se hace responsable por contrato o por agravio (incluyendo, sin limitación, negligencia, responsabilidad estricta o de otro tipo) por la pérdida de ventas, ingresos o utilidades, costo de capital o fondos, interrupción del negocio o costo del tiempo de inactividad, pérdida de uso, daños o pérdida del uso de otros bienes (muebles o inmuebles), no obtención de ahorros previstos, frustración de expectativas económicas o comerciales, reclamos de terceros (que no sean por lesiones corporales), o pérdidas económicas de cualquier tipo, o por ningún daño especial , incidental, indirecto, emergente, punitivo o ejemplar que surja de cualquier manera del cumplimiento o del incumplimiento de sus obligaciones en virtud de cualquier contrato de venta de producto, incluso si Dayton hubiera podido prever o hubiera sido advertido de la posibilidad de tales daños. Las partes acuerdan expresamente que estas limitaciones sobre los daños son asignaciones de riesgo que constituyen, en parte, el pago de este contrato, y que dichas limitaciones sobrevivirán a la determinación de cualquier tribunal de jurisdicción competente en el sentido de que cualquier recurso previsto en estos términos o disponible por ley no cumple su propósito esencial.

Printing date 10/06/2015

1 Identification

· Product identifier

· Trade name:City White Cure J8

· Article number: 83-120901

Reviewed on 10/06/2015

· Relevant identified uses of the substance or mixture and uses advised against No further relevant information available.

· Application of the substance / the mixture

· Details of the supplier of the safety data sheet

· Manufacturer/Supplier:

Dayton® Superior 4226 Kansas Avenue

Tel.: (866) 329-8724 Kansas City, KS 66106

Emergency Telephone Number: Use only in the event of an emergency involving a spill, leak, fire, exposure, or acc ident involving chemicals. Within the U.S., Canada, or the U.S. Virgin Islands, call ChemTrec at (800) 424-9300, 24 hours a day. Or, outside these areas, call international number, +1 703 741-5970. Collect calls are accepted.

· Information department: Environmental, Health, and Safety department.

2 Hazard(s) identification

· Classification of the substance or mixture

Skin Sens. 1H317May cause an allergic skin reaction. Carc. 2H351Suspected of causing cancer.

· Label elements

· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).

· Hazard pictograms

GHS07 GHS08

· Signal word Warning

· Hazard-determining components of labeling: Distilled Tall Oil Fatty Acids

· Hazard statements

May cause an allergic skin reaction. Suspected of causing cancer.

· Precautionary statements

Avoid breathing dust/fume/gas/mist/vapors/spray

Wear protective gloves.

Specific treatment (see on this label).

Wash contaminated clothing before reuse.

Store locked up.

Dispose of contents/container in accordance with local/regional/national/international regulations.

· Classification system:

· NFPA ratings (scale 0 - 4)

= 0

Printing date 10/06/2015

Trade name:City White Cure J8

· HMIS-ratings (scale 0 - 4)

HEALTH

FIRE

PHYSICAL HAZARD 0 0 0 Health = 0 Fire = 0 Reactivity = 0

· Other hazards

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

3 Composition/information on ingredients

· Chemical characterization: Mixtures

acc. to OSHA HCS

Reviewed on 10/06/2015

(Contd. of page 1)

· Description: Mixture of the substances listed below with nonhazardous additions.

· Dangerous components: 61790-12-3Distilled Tall Oil Fatty Acids

13463-67-7titanium dioxide

· Additional information: For the wording of the listed risk phrases refer to section 16.

4 First-aid measures

· Description of first aid measures

· General information:

Immediately remove any clothing soiled by the product. In the event of persistent symptoms recieve medical treatment.

· After inhalation: Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation. Immediately move exposed person to fresh air. If breathing difficulty persists or develops get prompt medical attention.

· After skin contact: Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.

· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

· After swallowing: Seek medical treatment.

· Information for doctor:

· Most important symptoms and effects, both acute and delayed No further relevant information available.

· Indication of any immediate medical attention and special treatment needed No further relevant information available.

5 Fire-fighting measures

· Extinguishing media

· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

· Special hazards arising from the substance or mixture No further relevant information available.

(Contd. on page 3) US

Printing date 10/06/2015

Trade name:City White Cure J8

· Advice for firefighters

· Protective equipment:

Reviewed on 10/06/2015

(Contd. of page 2)

Because fire may produce thermal decomposition products, wear a self-contained breathing apparatus (SCBA) with a full face piece operated in pressure-demand or positive-pressure mode.

6 Accidental release measures

· Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

· Environmental precautions:

Dilute with plenty of water.

Do not allow product to reach sewage system or any water course.

· Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Ensure adequate ventilation.

· Reference to other sections

See Section 7 for information on safe handling.

See Section 8 for information on personal protection equipment.

See Section 13 for disposal information.

7 Handling and storage

· Handling:

· Precautions for safe handling

Wear appropriate personal protective clothing to prevent eye and skin contact. Avoid breathing vapors or mists of thi s product. Use with adequate ventilation. Do not take internally.

· Information about protection against explosions and fires: No special measures required.

· Conditions for safe storage, including any incompatibilities

· Storage: cool and dry

· Requirements to be met by storerooms and receptacles: No special requirements.

· Information about storage in one common storage facility: Not required.

· Further information about storage conditions: None.

· Specific end use(s) No further relevant information available.

8 Exposure controls/personal protection

· Additional information about design of technical systems: No further data; see item 7.

· Control parameters

· Components with limit values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be mon itored at the workplace.

· Additional information: The lists that were valid during the creation were used as basis.

· Exposure controls

· Personal protective equipment:

· General protective and hygienic measures: Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.

Printing date 10/06/2015

Trade name:City White Cure J8

· Breathing equipment:

Reviewed on 10/06/2015

(Contd. of page 3)

In case of brief exposure or low pollution use resp iratory filter device. In case of intensive or long er exposure use respiratory protective device that is independent of circulating air.

· Protection of hands:

Protective gloves

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.

· Material of gloves

The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.

· Penetration time of glove material

The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.

· Eye protection: Wear appropriate eye protection to prevent eye contact.

9 Physical and chemical properties

· Information on basic physical and chemical properties

· General Information

· Appearance: Form: Liquid Color: According to product specification

· Odor: Characteristic

· Odour threshold: Not determined.

· pH-value: Not determined.

· Change in condition

Melting point/Melting range: Undetermined. Boiling point/Boiling range: 100 °C (212 °F)

· Flash point: Not applicable.

· Flammability (solid, gaseous): Not applicable.

· Ignition temperature: Decomposition temperature: Not determined.

· Auto igniting: Product is not selfigniting.

· Danger of explosion: Product does not present an explosion hazard.

· Explosion limits:

Lower: Not determined. Upper: Not determined.

· Vapor pressure at 20 °C (68 °F): 23 hPa (17 mm Hg)

· Density at 20 °C (68 °F): 0.994 g/cm³ (8.295 lbs/gal)

· Relative density Not determined.

· Vapour density Not determined.

· Evaporation rate Not determined.

(Contd. on page 5)

Printing date 10/06/2015

Reviewed on 10/06/2015

Trade name:City White Cure J8 (Contd. of page 4)

· Solubility in / Miscibility with Water: Fully miscible.

· Partition coefficient (n-octanol/water): Not determined.

· Viscosity: Dynamic: Not determined. Kinematic: Not determined.

· Solvent

· Other information No further relevant information available.

· Volatile Organic Compounds: Contains less than 50 g/L.

10Stability and reactivity

· Reactivity No decomposition if stored and applied as directed.

· Chemical stability No decomposition if stored and applied as directed

· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.

· Possibility of hazardous reactions No dangerous reactions known.

· Conditions to avoid Keep away from heat and sources of ignition.

· Incompatible materials: No further relevant information available.

· Hazardous decomposition products: No dangerous decomposition products known.

11Toxicological information

· Information on toxicological effects

· Acute toxicity:

· Primary irritant effect:

· on the skin: May cause skin irritation.

· on the eye: No irritating effect known.

· Sensitization: Sensitization possible through skin contact.

· Additional toxicological information: The product shows the following dangers according to internally approved calculation methods for preparations: Irritant

· Carcinogenic categories

· IARC (International Agency for Research on Cancer)

· NTP (National Toxicology Program)

Printing date 10/06/2015

Trade name:City White Cure J8

acc. to OSHA HCS

· OSHA-Ca (Occupational Safety & Health Administration) None of the ingredients is listed.

12Ecological information

· Toxicity

· Aquatic toxicity: No further relevant information available.

· Persistence and degradability No further relevant information available.

· Behavior in environmental systems:

· Bioaccumulative potential No further relevant information available.

· Mobility in soil No further relevant information available.

· Additional ecological information:

· General notes:

Reviewed on 10/06/2015

(Contd. of page 5)

Do not allow product to reach ground water, water course or sewage system, even in small quantities. Water hazard class 1 (Self-assessment): slightly hazardous for water

· Results of PBT and vPvB assessment

· PBT: Not applicable.

· vPvB: Not applicable.

· Other adverse effects No further relevant information available.

13Disposal considerations

· Waste treatment methods

· Recommendation:

Must not be disposed of as normal garbage. Do not allow product to reach sewage system. It is the generator's responsibility to determine if the waste meets applicable definitions of hazardous waste. State and local regulations may differ from federal disposal regulations. Dispose of waste material according to local, state, federal, and provincial environmental regulations.

· Uncleaned packagings:

· Recommendation: Disposal must be made according to Federal, State, and Local regulations.

· Recommended cleansing agent: Water, if necessary with cleansing agents.

14Transport information

· UN-Number

· DOT, ADR, ADN, IMDG, IATA Not Regulated

· UN proper shipping name

· DOT, ADR, ADN, IMDG, IATA Not Regulated

· Transport hazard class(es)

· DOT, ADR, ADN, IMDG, IATA

· Class Not Regulated

· Packing group

· DOT, ADR, IMDG, IATA Not Regulated

(Contd. on page 7)

Printing date 10/06/2015

Trade name:City White Cure J8

· Environmental hazards:

· Marine pollutant: No

· Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code Not applicable.

· Transport/Additional information:

· ADR

· U.S. Domestic Ground Shipments:

· U.S. Domestic Ground Non-Bulk (119 gal or less per container) Shipments:

Reviewed on 10/06/2015

(Contd. of page 6)

Same as listed for Standard Shipments above.

Same as listed for Standard Shipments above.

· Emergency Response Guide (ERG) Number: Not determine

· UN "Model Regulation": -

15Regulatory information

· Safety, health and environmental regulations/legislation specific for the substance or mixture

· Sara

· Section 355 (extremely hazardous substances): None of the ingredient is listed.

· Section 313 (Specific toxic chemical listings): This product may contain 1 or more toxic chemicals subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act (SARA) of 1986 and 40 CFR part 372. If so, the chemicals are listed below.

67-63-0isopropanol

111-42-22,2'-iminodiethanol

79-10-7acrylic acid

· TSCA (Toxic Substances Control Act): All ingredients are listed.

· Proposition 65

· Chemicals known to the State of California (Prop. 65) to cause cancer: 13463-67-7titanium dioxide 14808-60-7Quartz (SiO2) 111-42-22,2'-iminodiethanol

· Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed.

· Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed.

· Chemicals known to cause developmental toxicity: None of the ingredients is listed.

· Cancerogenity categories

· EPA (Environmental Protection Agency) None of the ingredients is listed.

(Contd. on page 8)

Printing date 10/06/2015

acc. to OSHA HCS

Reviewed on 10/06/2015

Trade name:City White Cure J8 (Contd. of page 7)

· TLV (Threshold Limit Value established by ACGIH)

13463-67-7titanium

14808-60-7Quartz (SiO2)

· MAK (German Maximum Workplace Concentration)

· NIOSH-Ca (National Institute for Occupational Safety and Health) 13463-67-7titanium dioxide 14808-60-7Quartz (SiO2)

· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).

· Hazard pictograms

GHS07 GHS08

· Signal word Warning

· Hazard-determining components of labeling: Distilled Tall Oil Fatty Acids

· Hazard statements

May cause an allergic skin reaction. Suspected of causing cancer.

· Precautionary statements

Avoid breathing dust/fume/gas/mist/vapors/spray

Wear protective gloves. Specific treatment (see on this label).

Wash contaminated clothing before reuse. Store locked up.

Dispose of contents/container in accordance with local/regional/national/international regulations.

· National regulations:

· Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.

· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.

16Other information

The provided information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

· Department issuing SDS: Environmental, Health & Safety Department

· Contact: Environmental, Health & Safety Manager

Printing date 10/06/2015

Trade name:City White Cure J8

· Date of preparation / last revision 10/06/2015 / 180

· Abbreviations and acronyms:

Reviewed on 10/06/2015

(Contd. of page 8)

ADR: Accord européen sur le transport des marchandi ses dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road)

IMDG: International Maritime Code for Dangerous Goods

DOT: US Department of Transportation

IATA: International Air Transport Association

ACGIH: American Conference of Governmental Industrial Hygienists

EINECS: European Inventory of Existing Commercial Chemical Substances

ELINCS: European List of Notified Chemical Substances

CAS: Chemical Abstracts Service (division of the American Chemical Society)

NFPA: National Fire Protection Association (USA)

HMIS: Hazardous Materials Identification System (USA)

Skin Sens. 1: Sensitisation - Skin, Hazard Category 1

Carc. 2: Carcinogenicity, Hazard Category 2

Turn static files into dynamic content formats.

Create a flipbook