2026 Harley-Davidson® Genuine Motorcycle Parts & Accessories Catalogue

GENUINE MOTORCYCLE PARTS & ACCESSORIES

Real Heart and Soul.

Every rider sees something different in their Harley-Davidson mtorcycle. That’s why even the smallest change can shift the whole attitude of a bike. Start with what speaks to you and let your personality take the lead.

ADVENTURE TOURING

A. ADVENTURE WINDSHIELD – 18" CLEAR

This windshield is approximately 2.5 inches taller than the Original Equipment windshield for added protection from the elements.

57400454

$199.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

B. ADVENTURE WINDSHIELD

This windshield is approximately 4.5 inches lower than the Original Equipment windshield and allows most riders to see over the windshield.

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE and ’25-later RA1250ST models.

57400456 11" Dark Smoke.

LIGHTS* These rugged auxiliary LED

offer three-way function that will serve the adventure

in

Installed as a pair, each

durable aluminum

has a three-beam, four-lens

In

also make the motorcycle more

to

The factory-integrated design makes these lights easy to install and a perfect fit and look on the bike. Three-way functionality: Fog lights produce a wide pool of light directly in front of the motorcycle to light the edge of the road in low-visibility conditions. Driving lights punch light further down the road to augment headlight performance. Off-Road beams deliver 275-meter forward visibility and 50-meter side visibility to light up the trail (not street legal). Powder coated lightweight aluminum housing. High-impact hard-coated and anti-fog coated outer lens. Installation requires separate purchase of Auxiliary Light Installation Kit.

68000340 $549.95

Fits ’21-later RA1250, RA1250S and RA1250SE if Brush Guard is installed. Also fits ’14-later Touring models (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, ’25-later FLHXU and FLTRXRRSE and ’26-later FLHXL, FLTRXL, FLTRXSTSE, FLHXLSE, FLHXSE, FLHXSTSE, FLHLT, FLHLTSE and FLTRT). Stock on ’24-later RA1250SE and ’26-later RA1250L models. Lamps require additional installation kits as follows: ’24 RA1250S models require 2x P/N 10200924, 2x P/N 10200691, 2x P/N 68000403, 2x P/N 69203245 and 2x P/N 10006 (Does not require purchase of a switch pack, lights are controlled through instrument menu on vehicle only). ’21-’23 RA1250S and ’21-later RA1250 models require Install Kit P/N 68000343. ’14-later Road Glide models require Install Kit P/N 68000342. All other ’14later Touring models require Install Kit P/N 68000341. Also available:

AUXILIARY LIGHT INSTALLATION KIT –PAN AMERICA Installation kit includes a wiring harness, mounting brackets, and switch pack for installing Daymaker® LED Forward Auxiliary Lights.

68000343 $199.95 Fits ’21-later RA1250, RA1250S, and RA1250SE models.

A. SUNDOWNER™ SOLO SEAT - PAN AMERICA®

Have miles to ride before you sleep? The new Sundowner™ Solo Seat for Harley-Davidson® Pan America® 1250 models can help keep you comfortable and alert until the next gas stop or camp site. Its enhanced bucket shape and sphericalvoid foam construction is designed to reduce numbing pressure points, and waterproof construction means you won’t have a soggy bum after the rain quits. Factory fit retains your bike’s tool storage and high/low position features. Treat your passenger to a matching Sundowner™ Pillion (sold separately) for two-up comfort.

52000478

$368.95

Fits ’21-later RA1250, RA1250S, ’24 RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

B. SUNDOWNER PASSENGER PILLION - PAN AMERICA

Provides a passenger Sundowner comfort with style that matches the Sundowner seat. Wider shape than Original Equipment pillion for added passenger comfort and confidence when riding on or off road. Designed for Original Equipment mounting points and does not compromise rider seat features. Waterproof construction and seam sealed stitch lines prevent water from soaking into the foam and leaving the rider with a damp bum.

52400249

$174.95

Fits ’21-later RA1250, RA1250S, ’24 RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

C. REACH® SOLO SEAT – PAN AMERICA

The Reach® Solo Seat lowers seat height by 1 inch to optimize fit for riders of shorter stature, while retaining full functionality. Helps many riders get feet down with confidence at a stop. Retains the two-position seat adjustability feature to fine-tune rider ergonomics. Retains easy access to under seat tool storage. Replaces only the rider seat position. Matches the style of the Original Equipment seat

52000471

$266.95 Fits ’21-later RA1250, RA1250S, ’24 RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

D. TALLBOY® SOLO SEAT – PAN AMERICA

For riders with a longer inseam, a Tallboy® Seat moves the rider up from the stock seating position and places the body for a natural arm and leg reach to the controls. The Tallboy Seat increases seat height by 1". Opens the rider’s hip/knee/ankle angles for more comfort, especially over longer distances. Gives the rider a more-commanding position and view of the road or trail ahead. Retains the two-position seat adjustability feature to fine-tune rider ergonomics. Retains easy access to under seat tool storage. Replaces only the rider seat position. Matches the Original Equipment seat.

52000472

$266.95

Fits ’21-later RA1250, RA1250S, ’24 RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

E. TACTICAL HAND GRIPS

A black rubber grid pattern with deep grooves provides outstanding grip for rider comfort and confidence in any riding condition.

56100402 $99.95

Fits ’21-later Revolution® Max engine-equipped models. Does not fit models with original equipment heated grips.

F. TACTICAL HEATED HAND GRIPS Get more comfort and control with these heated grips. Heat settings are controlled with a military grade resistor, and use a thermostat to automatically monitor and adjust heat output relative to the ambient temperature. A heating element wound internally to the grips provides consistent and even heating. The grips feature a black rubber grid pattern with deep grooves that provide outstanding grip for rider comfort and confidence in any riding condition.

56100401 $189.95 Fits ’21-later RA1250S, RH1250S, RH975S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models. RH1250S and RH975S models require a Digital Tech update by a Harley-Davidson® dealer.

G. WILD ONE™ HEATED HAND GRIPS

Add daring, raw-and-rugged style with durable billet aluminum Wild One™ Collection accessories. Each is finished in gloss black with bright, machined aluminum highlights, a variety of textures and exposed hardware to communicate power, speed, and performance. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor, and use automatic temperature monitoring to adjust to ambient temperatures. Grips have been thermally mapped to provide more-uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides. Combine style and comfort for cool morning or frigid night rides.

56100483 Heated. $249.95 Fits ’21-later RA1250S, RH1250S, RH975S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models. RH1250S and RH975S models require a Digital Tech update by a Harley-Davidson dealer.

H. EMPIRE™ COLLECTION – HEATED HAND GRIPS

Combine style and comfort for cool morning or frigid night rides. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor, and use automatic temperature monitoring to adjust to ambient temperatures. Grips have been thermally mapped to provide a more-uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides.

Fits ’21-later RA1250S, RH1250S, RH975S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models. RH1250S and RH975S models require a Digital Tech update by a HarleyDavidson dealer.

56100487 Black. $255.95

56100488 Black Machine Cut. $265.95

I. PAN AMERICA® TALL RISERS

Gain comfort with these Tall Risers, which move the handlebar up and back 2 inches compared to the stock riser. Improves seated reach for riders with shorter arm length. Improves control and comfort when the rider is standing on the foot pegs for off-road travel.

55900241 $191.95

Fits ’21-’23 RA1250 and RA1250S models.

J. PAN AMERICA STEERING DAMPER KIT Rocks. Ruts. That deep sand washes. Ride it all with more confidence after installing this Öhlins™ steering damper kit, designed and validated by Harley-Davidson specifically for the Pan America® 1250 model. This premium steering damper enhances dynamic performance, especially during aggressive off-road riding. You’ll moto with less fatigue and enhanced control. Get out there. Reduces fatigue by damping handlebar motion while off-road. Kit includes bracket, damper, and necessary Installation hardware. Factory designed for ideal fit and function.

45700068 $419.95

Fits ’21-later RA1250 and ’24-later RA1250SE models. Original Equipment on RA1250L and RA1250S models.

A. SKID PLATE

Tackle tough off-road situations with confidence. The accessory Skid Plate replaces the Original Equipment skid plate for added protection from flying rocks and impacts during offroad riding. Heavy-duty aluminum construction. The factoryintegrated design ensures proper fit and easy installation.The Skid Plate also gives the motorcycle extra rugged style.

49000281

$399.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE and ’25later RA1250ST models.

49000191

Fits ’21-’23 RA1250 and RA1250S models.

B. MUFFLER GUARD

$399.95

Tackle tough off-road situations with confidence. This rugged, tubular steel guard is designed to protect the muffler from damage during a tip-over event. The factory-integrated design ensures a perfect fit and easy installation.

47200732

$170.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

C. FRONT AXLE GUARDS

Durable engineered materials are designed to protect the Pan America® 1250 model front axle from damage in a low-speed tip-over event. Polyamide guard with a reinforced plastic core and TPU coating is abrasion resistant with excellent mechanical damping capabilities to protect the axle in a low-speed tipover event. Axle thread and spacers for easy installation on Pan America models. Axle thread and spacers for easy installation on Pan America models. Axle thread and spacers for easy installation on Pan America models. Embossed HarleyDavidson script logo. Sold as a set of two guards.

43000303 $106.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

D. REAR AXLE GUARDS

Durable engineered materials are designed to protect the Pan America 1250 model rear axle from damage in a low-speed tip-over event. Polyamide guard with a reinforced plastic core and TPU coating is abrasion resistant with excellent mechanical damping capabilities to protect the axle in a low-speed tipover event. Axle thread and spacers for easy installation on Pan America 1250 models. Embossed Harley-Davidson script logo. Sold as a set of two guards.

43000304

$106.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

E. REAR BRAKE RESERVOIR GUARD

This compact and rugged aluminum guard is designed to help protect the Pan America 1250 model rear brake fluid reservoir from damage in a low-speed tip-over event, and from passing brush or flying gravel. Compact aluminum guard fits within motorcycle frame for outstanding protection with minimal weight and no interference while riding. Guard is secured to existing mount by a single M6 Allen bolt for quick and easy removal when maintenance is required. Designed specifically for Pan America 1250 models for a factory fit and installation with no drilling. Laser-etched Harley-Davidson script 49000248 $59.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

Center Stand supports the

Raises the rear wheel off the

in an

for easier maintenance and tire changes. With the Center Stand deployed, the parked motorcycle takes up less space than it would leaning on its side stand. Pre-assembled with springs in place.

92900066 $294.95 Fits ’21-later RA1250 and ’24-later RA1250SE. Original Equipment on RA1250L, RA1250S and RA1250SE.

H. RADIATOR SHIELD

The mesh Radiator Shield attaches to the front of the radiator to protect it from small stones and other debris, especially when riding off road. The factory-integrated design of this shield ensures a perfect fit and easy installation, and its mesh adds rugged style to the bike.

57200258

$174.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models. Original Equipment on RA1250L and RA1250SE.

I. BRUSH GUARD*

Tackle tough off-road situations with confidence. The Brush Guard is designed to protect the radiator shroud and other components from damage due to passing brush along a trail, and in the case of a tip-over. Factory-integrated design ensures a perfect fit and easy installation. Rugged tubular steel construction and durable Satin Black finish matches motorcycle frame.

49000192

$319.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE and ’25later RA1250ST models. Original Equipment on RA1250S and RA1250SE and RA1250L models.

J. PAN AMERICA HAND WIND DEFLECTORS Add protection from the elements. These lightweight Hand Wind Deflectors help keep wind, insects, small stones and small branches from impacting the rider’s hands and provide added comfort in cool weather. Easy to install on Original Equipment mounting points.

55900297 $137.95

Fits ’21-later

10 PAN AMERICA®

PAN AMERICA® ALUMINUM LUGGAGE

All rugged aluminum luggage was created in collaboration with SW-MOTECH™ for on- and off-road travel. Each piece has been designed and tested with the motorcycle to ensure factory-quality fit, durability and reliability, without compromising motorcycle handling or lean angle. Both the cases and mounts have passed Harley-Davidson static tip-over tests. The anodized or painted finish is easy to clean and prevents oxidation. With a gasket in the lid, each piece is waterproof and passes a rigorous Harley-Davidson water-intrusion test. The cases each have integrated handles and bungee eyes, and a single key locks each case closed and locks the case to its mount.

A. PAN AMERICA ANODIZED ALUMINUM TOP CASE Luggage volume capacity: 38 liters. Luggage weight capacity is 10 kg (22 pounds).

53000814 Clear Anodized.

$580.95

Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Requires separate purchase of Top Case Mounting System P/N 53000800A.

B. PAN AMERICA ANODIZED ALUMINUM SIDE CASES

Luggage volume capacity: Right case 37 liters, left case 45 liters. Luggage weight capacity is 10 kg (22 pounds) in each case.

90202082 Clear Anodized.

$1,199.95 Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Requires separate purchase of Side Case Mounting System P/N 90202087A.

C. PAN AMERICA ANODIZED ALUMINUM TOP CASE –BLACK Luggage volume capacity: 38 liters. Luggage weight capacity is 10 kg (22 pounds).

53000816 Black. $580.95 Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Requires separate purchase of Top Case Mounting System P/N 53000800A.

D. PAN AMERICA ALUMINUM SIDE CASES – BLACK Luggage volume capacity: Right case 37 liters, left case 45 liters. Luggage weight capacity is 10 kg (22 pounds) in each case.

90202088 Black. $1,199.95

Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Requires separate purchase of Side Case Mounting System P/N 90202087A.

Luggage

PAN AMERICA® ADVENTURE SOFT LUGGAGE

The Adventure Soft Luggage line is intended for the hardcore off-road rider. Designed specifically for motorcycle use, these durable bags resist damage if the bike tips over. The bag material is waterproof, exterior pockets have waterproof zippers, and the roll-top closure creates a weather-tight seal, so you can ride with confidence knowing that gear will stay dry no matter the conditions. The roll-top design and multiple compression straps make it possible to cinch the load tightly, and give this luggage flexible capacity. The bags are reflective to enhance their visibility in low light conditions. Includes universal mounting straps.

A. PAN AMERICA ADVENTURE SOFT SADDLEBAGS Adventure Soft Saddlebags are supported by the Side Case Mounting System (sold separately). Luggage volume capacity is 25 liters in each bag. Weight capacity is 10 kg (22 pounds) in each bag. Sold as a set of two bags with mounting straps Installation requires separate purchase of Side Case Mounting System P/N 90202087A.

90202107

$518.95

Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Requires separate purchase of Side Case Mounting System P/N 90202087A.

B. PAN AMERICA ADVENTURE DUFFEL BAG

The Adventure Duffel Bag has extra-large volume capacity but can be compressed to match the volume of the contents and be as compact as possible. Duffel can be secured to the Top Case Mounting Plate (sold separately) behind the seat or on the passenger pillion in front of a hard case. Luggage volume capacity: 2,440 cubic inches (40 liters). Luggage weight capacity: 22 pounds (10 kg) P/N 90202087A.

93300142 $179.95

Fits ’21-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L

14 PAN AMERICA®

Screamin’ Eagle® Performance Parts

A. SCREAMIN’ EAGLE® QUICKSHIFTER FOR PAN AMERICA® 1250 MODELS 5

Shift in an instant. The Screamin’ Eagle® Quickshifter provides clutchless up and down shifts without risking transmissions damage. When foot shift control is engaged fuel and ignition are cut within milliseconds, which unloads the transmission allowing you to fly through up-shifts without touching the throttle or clutch. Shifter signal also blips the throttle for seamless down-shifts without using the clutch. Precise shifts are accomplished in an instant enabling smoother, stress-free control in on- and off-road situations. Installation requires a dealer Digital Technician™ update/flash.

32700151

$339.95

Fits ’22-later RA1250, RA1250S, ’25-later RA1250ST and ’26later RA1250L models. Installation requires dealer Digital Technician update. Does not fit California models, ’22-’24later RA1250 and RA1250S California models instead require P/N 32700168B.

32700168B

Fits ’22-’24 California RA1250 and RA1250S models. Installation requires dealer Digital Technician update.

$349.95

B. SCREAMIN’ EAGLE® STREET CANNON MUFFLER –PAN AMERICA 5

Realize a significant weight reduction and a deep, sporty exhaust tone with this Screamin Eagle® Street Cannon muffler, designed specifically to fit right and look great on Pan America® 1250 and Pan America 1250 Special models. Weighs 42 percent less than the Original Equipment muffler. Durable construction includes a titanium shell, carbon fiber end cap and a stainless-steel mid-pipe. The deep and sporty exhaust note is stirring but not extreme. Engineered with the motorcycle for easy installation and seamless fit.

65600389 Titanium. $1,024.95

Fits ’21-later RA1250 and RA1250S models. Does not fit California models.

65600449A $1,024.95

Fits ’22-’23 California RA1250 and RA1250S models. Installation requires dealer Digital Technician update.

C. SCREAMIN’ EAGLE® AIR FILTERS

1. SCREAMIN’ EAGLE HIGH-FLOW AIR FILTER – ROUND 5

This washable and reusable filter is a direct replacement for the original equipment filter and provides the same air flow performance as the original equipment.

29400428 $74.95

Fits ’21-later RA1250, RA1250S and RH1250S models.

29400449A $85.67

Fits ’21 California ’21-’22 RA1250, RA1250S, RH1250, and ’22 RH975 models.

2. SCREAMIN’ EAGLE HIGH-FLOW AIR FILTER – HOMEPLATE 5

This washable and reusable filter provides 5 percent more air flow to the engine compared to the original equipment filter.

29400426 $89.95

Fits ’21-later RA1250, RA1250S and RH1250S models.

29400450A $94.95

Fits California ’21-’22 RA1250, RA1250S, RH1250, and ’22 RH975 models.

3 SCREAMIN’ EAGLE EXTREME-FLOW AIR FILTER – PAN AMERICA 5

This washable and reusable filter is specifically designed for off-road environments with off-road specific filter media. Provides 9 percent more air flow to the engine compared to the original equipment filter to allow the engine to breathe in all types of riding conditions. Clean, dry, and re-oil to reuse

29400427 $129.95

Fits ’21-later RA1250 and RA1250S models.

29400451A $139.95

Fits California ’21-’22 RA1250, RA1250S, RH1250, and ’22 RH975 models.

5 Harley-Davidson® motorcycles modified with some Screamin’Eagle® Performance products must not be used on public roads and, in some cases, may be restricted to closedcourse competition. These performance parts are 49-state U.S. EPA compliant but are NOT compliant for sale or use in California on pollution-controlled motor vehicles. California guidelines on tampering can also lead to substantial fines and penalties. Screamin’ Eagle Performance products are intended for the experienced rider only.

A. LACED WHEELS

This laced wheel is as rugged as it looks. A new design has an aluminum rim and carbon steel with zinc plated spokes. The spokes are inserted through the aluminum wheel rim outside of the tire bead. An ideal wheel set for serious off-road adventure riding. Anodized matte black rim and gloss black acrylic e-coat hub. Strong, durable design intended for challenging off-road duty with no compromise of on-road performance. Design permits the use of a tubeless tire, which eliminates the weight of an inner tube. Spokes are repairable in the field without removing the wheel from the motorcycle.

43300821 19" Front.

$949.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE and ’26later RA1250L models. Requires separate purchase of (qty 2) Front Brake Rotors P/N 41500195, (qty 10) Brake Rotor Hardware P/N 41500020 and Wheel Installation Kit P/N 42400038.

40900814 17" Rear.

$999.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE and ’26later RA1250Lmodels. Requires separate purchase of Wheel Installation Kit P/N 42400039.

B. WHEEL INSTALLATION KIT (ABS) – FRONT

Enables installation of front Laced wheel

42400038

$89.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

WHEEL INSTALLATION KIT (ABS) – REAR

Enables installation of rear Laced wheel.

42400039

$89.95

Fits ’21-later RA1250, RA1250S, ’24-later RA1250SE, ’25-later RA1250ST and ’26-later RA1250L models.

C. MOTORCYCLE TIRE PRESSURE MONITORING SYSTEM

The Harley-Davidson® Tire Pressure Monitoring System (TPMS) displays current front and rear tire pressure on the on the display screen and displays an indicator to alert the rider when tire pressure is low, and the pressure should be checked.

Fits ’21-later Pan America models equipped with laced wheels, ’23-later FLHXSE and FLTRXSE (except RH975 and RH975S and Japan models). This is a 116 degree sensor. Original Equipment on RA1250ST models with Cast Wheels.

42300150

$224.95

Fits ’20-later Touring models (except FLHXSE, FLTRXSE Japan models, ’25-later FLTRXRRSE, ’25 FLHXL, FLHXLSE, FLTRXL and Trike models) equipped with Original Equipment or Accessory wheels that accept a 90 degree TPMS sensor. Fits ’21-later RA1250 and RA1250S models (except Japan) with Cast Wheels.

42300124A

$224.95

D. HARLEY-DAVIDSON® TOOL KIT – PAN AMERICA®

A tool kit designed specifically for Pan America® 1250 models. Provides tools necessary for external service and maintenance of your vehicle.

Kit Includes:

• 6" long nose locking pliers with wire cutter, Curved jaw lineman pliers with wire cutter

• L-handle 1/4" square drive, 1/4" square to 1/4" hex adaptor, 1/4" 8mm square drive

• 32mm flat wrench, 36mm/22mm flat wrench

• 14mm spark plug wrench, 6" adjustable

E. MICHELIN® ANAKEE WILD OFF-ROAD TIRES

All-new compounds, combined with an innovative tread pattern inspired by Dakar winning MICHELIN® Desert Race® tire, offering extraordinary longevity for extended adventure Off-road traction, handling, and precise steering thanks to an innovative tread pattern. The alignment of the scoop-shaped, staggered tread blocks offer traction on soft terrain and in all conditions. Resistant to damage and high temperatures due to optimized tread depth and a new compound.Excellent longevity. These tires may be installed on the Original Equipment cast aluminum or laced wheels *Tires requires the purchase of a Digital Technician™ update completed by a Harley-Davidson® dealer. Michelin Anakee Wild Off-Road Front Tire Fits ’21-’25 RA1250, RA1250S, ’24-’25 RA1250SE models. 43100049 120/70R19. $284.95 Michelin Anakee Wild

A. QUICK-RELEASE TOURING WINDSHIELD – CLEAR

Wind deflection with sporty style. This detachable windshield is designed specifically for the Nightster® model and can be installed or removed quickly and easily for desired style and protection. 17" clear windshield deflects wind flow over the head of most riders to reduce wind force on the helmet and chest to reduce fatigue on long highway rides. Offers added rider protection from wind, rain and insects. Mounts to the forks with quick-release clamps so there is no leave-behind hardware when the windshield is removed. Black mounting hardware and support brackets match the style of the Nightster model. Harley-Davidson quality hard-coated polycarbonate material resists chips and scratching. Includes all necessary mounting hardware

57400479 $469.95 Fits ’22-later RH975 and RH975S models.

B. QUICK-RELEASE COMPACT WINDSHIELD –LIGHT SMOKE

Wind deflection with sporty style. This detachable windshield is designed specifically for the Nightster model and can be installed or removed quickly and easily for desired style and protection. 11" smoked windshield maintains consistent wind flow at shoulders and above for improved comfort and added protection from the elements Light Smoke tint and compact design enhances the look of the bike. Mounts to the forks with quick-release clamps so there is no leave-behind hardware when the windshield is removed. Black mounting hardware and support brackets match the style of the Nightster model. Harley-Davidson quality hard-coated polycarbonate material resists chips and scratching. Includes all necessary mounting hardware

57400492 $459.95 Fits ’22-later RH975 and RH975S models.

C. QUICK-RELEASE COMPACT WINDSHIELD Wind deflection with sporty style. This detachable windshield is designed specifically for the Sportster® S model and can be installed or removed quickly and easily for desired style and protection. Shaped to maintain wind flow at shoulders and above for improved comfort or added protection from the elements while maintaining airflow. Mounts

A. SUNDOWNER™ SOLO RIDER SEAT – NIGHTSTER®

Maximize your miles. The Sundowner™ Solo Seat for the Harley-Davidson® Nightster® model can help keep you comfortable and alert until the next gas stop. Its enhanced bucket shape and spherical-void foam construction is designed to reduce numbing pressure points, and waterproof construction means you won’t have a soggy bum after the rain quits. Enhanced bucket design cradles the rider and minimizes pressure points for improved long-haul comfort

Waterproof construction and seam sealed stitch lines prevent water from soaking into the foam and leaving the rider with a damp bum. Factory fit retains access to fuel fill and under-seat features. Easy installation

52000571

Fits ’22-later RH975 and RH975S models.

B. SUNDOWNER™ PASSENGER PILLION

$277.95

Share the ride and the comfort. Designed for the Nightster model, the Sundowner™ pillion is wider and longer than a standard accessory pillion for more miles of comfort. Designed to match the styling of the Sundowner™ Solo Rider Seat. Waterproof construction and seam sealed stitch lines prevent water from soaking into the foam and leaving the passenger with a damp bum. Uses factory mounting points for clean-and-easy installation and removal. Cover and stitching matches the Sundowner Solo Seat to maintain integrated motorcycle style. Includes all necessary mounting hardware

52400288 $199.95

Fits ’22-later RH975 and RH975S models equipped with Original Equipment or Sundowner solo seat. RH975 models require separate purchase of Passenger Footpeg Mount and Peg Kit P/N 50502434.

C. REACH® SOLO SEAT – NIGHTSTER

This seat is shaped to deliver the ergonomic position that a shorter rider needs for optimal comfort and control, while maintaining premium style. Places the rider a 0.5" (13mm) forward and 0.3" (8mm) lower when compared to the stock Nightster model seat. Heavily sculpted nose and inner thigh area greatly improves reach to ground and removes inner thigh pressure for shorter riders. Low overall height provides the rider with added confidence and control while the bike is at a stop or during parking maneuvers. Seat maintains style and fit of the stock seat for a great look. Seat width 12.8" 52000550 $249.95

Fits ’22-later RH975 and RH975S models.

D. PASSENGER PILLION

Share the ride and the fun. Designed for the Nightster® model, the pillion is secured to the tail section behind the solo seat. Uses factory mounting points for clean-and-easy installation and removal. Quality vinyl cover maintains integrated motorcycle style. Includes all necessary mounting hardware 52400306 $174.95 Fits ’22-later RH975 and

A. HOLDFASTTM SISSY BAR UPRIGHT – LOW HEIGHT –GLOSS BLACK

A sissy bar and passenger backrest pad is the starting point for building a complete touring machine. The backrest adds longrange comfort and support and provides a feeling of confidence and control for the passenger. HoldFast™ One-Piece Uprights feature an exclusive latch system that permits the backrest to be installed or removed in seconds to add versatility to your ride. The HoldFast sissy bar upright simply slips into position on the docking points, and the fingertip latches are clicked into position for a positive lock. Gloss Black Finish An ideal location to secure cargo. Improves passenger comfort and confidence. Available in short and standard height for optimized passenger back support. Works with Compact Passenger Backrest Pads (sold separately).

52300702A

Fits ’22-later RH975 and RH975S models.

B. PASSENGER BACKREST KIT

$221.95

This low padded backrest slides into position on Passenger Pillion Kit P/N 52400271 or 52400251 (sold separately) and is secured to the tail section to provide ideal passenger confidence and comfort. Integrated design with the Sportster® S model for easy installation and removal. Pad matches the upholstery of the Original Equipment seat for an integrated look. The backrest is not designed to support luggage. Includes required mounting hardware.

52300715 $229.95

Fits ’21-later RH1250S models. Requires separate purchase of Passenger Pillion Kit P/N 52400271.

C. HOLDFASTTM DOCKING HARDWARE KIT

The ideal choice for maximum versatility, this complete kit contains the docking hardware necessary to install all HoldFast™ detachable accessory options. Even if you only install a passenger backrest today, this kit allows you to add additional accessories in the future. Gloss Black Finish. Allows the addition of accessories as your customizing demands change. Includes docking points to allow installation of H-D® Detachables™ Sissy Bar and Solo Luggage Rack. This kit has been tested and validated to the rigorous standards required from the Harley-Davidson brand of premium products.

52300705

Fits ’22-later RH975 and RH975S models.

D. SINGLE-SIDED SWINGARM BAG – CLASSIC

$44.95

Room for essentials with classic style, the Single-Sided Swingarm Bag is updated with modern design. Bag secures to left-side swingarm with easy-to-use straps and a semi-rigid back. Large enough to hold riding essentials you can’t carry in a pocket, including most medium sized bottles. The detachable backwall organizer makes pre-packing the bag easy without having to squat or bend down to the bag. A waterproof removeable liner helps keep contents dry. Engineered to not affect motorcycle lean angle. The black leather shell has a classic look that gains patina with age. Bag support required for installation.

90202530 $199.95

Fits ’21-later RH1250S and ’22-later RH975 and RH975S models. RH1250S models require separate purchase of bracket P/N 90202533. RH975 models require separate purchase of bracket P/N 90202532

E. DETACHABLE

zipped off their yoke to carry away with convenient built-in handles. Constructed from 1680 denier, UV-stable, PVC-backed nylon. Adjustable Yoke fits below or over passenger seat. Zippers on each side of the yoke make it easy to release the bags to carry into home, hotel or work. Roll-top waterproof liners protect gear from the weather. Liners are high-visibility gray color, making the bag contents visible even in low light. Zippered pocket in each bag lid to hold small items such as keys or wallet. Laser-cut MOLLE system on bag tops and ends provide mounting options for straps, bungee cord or carabiners to secure gear externally. Rugged quick-release buckles secure the lids. Luggage capacity: 700 cubic inches per bag, 6 pound load rating per bag.

90202693

$399.95

Fits ’22-later RH975 and ’23-later RH975S models. Fits ’00later XL models (except XL1200CX, XL1200S, XL1200T, and ’02-’03 XL883R) and ’94-’15 XL models (except XL1200S, XL1200T, and ’02-’03 XL883R) without H-D® Detachables™. Fits ’08-later Dyna® models (except FLD) without H-D Detachables sissy bars or racks. Fits ’18-later FLSL, FXBB, FXBBS and FXST. All fitments require model specific H-D Saddlebag supports.

G. THROW-OVER SADDLEBAG SUPPORT – NIGHTSTER® Required support for installation of Overwatch Throw-Over Saddlebags P/N 90202693. Easy installation to existing mounting points. Black finish is inconspicuous when bags are not installed. Includes mounting hardware.

90202689 $139.95 Fits ’22-later RH975 and RH975S models.

A. FORWARD CONTROL KIT – GLOSS BLACK

Stretch out for maximum comfort and style. Gloss Black finish Moves the controls 10.2" (259mm) forward and 1.6" (40mm) upward from the Original Equipment foot position, providing a comfortable riding position. Does not compromise motorcycle lean angle. Ideal for taller riders or those that like to stretch out when hitting the open road. Includes all components necessary to convert your mid-controls to forward controls.

50502205 $599.95

Fits ’22-later RH975 and ’23-later RH975S models not equipped with engine guards. Requires separate purchase of Chin Guard P/N 57200347.

B. CHIN GUARD

Replacement Chin Guard offers factory mounting locations and updated design to accommodate pass through of accessory forward foot controls or engine guard. Original Equipment mounting locations for easy bolt-on installation. No cutting or other modification required for a factory finish out of the box.

57200347 $49.95

Fits ’22-later RH975 and ’23-later RH975S models.

C. MID-CONTROL KIT

Move your feet. This complete mid-control conversion kit puts the Sportster® S motorcycle rider in a more-aggressive foot position for enhanced comfort and cornering confidence. It also reduces the reach to foot controls, an ergonomic advantage for riders of shorter stature. Relocates the left and right rider foot pegs and foot controls from the Original Equipment forward position to a mid-position on the bike. Installation does not compromise motorcycle lean angle. Mid-controls may be installed with passenger footpegs. Factory design ensures ideal fit and function. Includes all necessary mounting components and hardware.

50502136 $693.95

Fits ’21-later RH1250S models.

D. BLACK SHIFT LINKAGES

Complete a custom look when installing black accessory foot controls. Direct replacement for Original Equipment linkage ensures proper fit and performance. Durable black finish. 33600402 $104.95 Fits ’21-later RH1250S models with original equipment forward controls.

33600403 $104.95

Fits ’22-later RH975 and ’23-later RH975S models with original equipment mid-controls.

28 SPORT

Handlebars

A. MOTO BAR – NIGHTSTER®

When installed with our 5” riser this 1” diameter Moto Bar moves hand controls 2 inches up and 1 inch back to put the rider in a commanding position on the motorcycle. Features a Gloss Black finish and a performance-style flat-track bend that moves hand controls up and back. Original Equipment on Nightster Special model.

55801558

$149.95

Fits ’22-later RH975 models. Requires separate purchase of additional components, including Nightster 5” Riser P/N 55900307

B. NIGHTSTER RISER – 5"

When installed with our Moto Bar this 5” riser moves hand controls 2 inches up and 1 inch back to put the rider in a commanding position on the motorcycle.

55900307

$168.95

Fits ’22-later RH975 models.Requires separate purchase of additional components, including P/N 55801558.

C. REACH® HANDLEBAR

With a shape designed to place the handlebars closer to the rider, this Reach® Handlebar puts the rider in an upright seating position for added comfort and control. Designed to place the handlebars closer to the rider for ideal fit, comfort and control. Nightster® models require separate purchase of Brake Line P/N 41800874. Gloss Black finish 1” bar diameter.

55801263 $149.95

Fits ’21-’23 RH1250S and ’22-later RH975 models.

D. TRACKER HANDLEBAR

Inspired by rough-and-tumble flat track race bikes, this handlebar is wider and taller than stock and features a cross brace. Designed to give the Sportster® S and Nightster models additional leverage during spirited riding. Fixed crossbar gives aggressive look to front end. Nightster models require separate purchase of Brake Line P/N 41800874. Gloss Black finish

55801280 $189.95

Fits ’21-’23 RH1250S and ’22-later RH975 models.

WILD ONE™ COLLECTION

Add daring, raw-and-rugged style with durable billet aluminum Wild One™ Collection accessories. Each is finished in gloss black with bright, machined aluminum highlights, a variety of textures and exposed hardware to communicate power, speed, and performance.

A. WILD ONE COLLECTION – HAND GRIPS

Glueless design permits removal for servicing without damage Rubber provides a positive grip while riding. Sold as a pair.

56100462

$144.95

Fits ’21-later Revolution® Max engine-equipped models. Does not fit models with original equipment heated grips.

56100483 Heated.

$249.95

Fits ’21-later RA1250S, RH1250S and RH975S models. RH1250S and RH975S models require a Digital Technician™ update by a Harley-Davidson® dealer.

B. WILD ONE COLLECTION – MIRRORS

Includes Left and Right mirror and mounting hardware.

56000241

$199.95

Fits ’21-later Revolution Max engine-equipped models. RH975, RH975S and RH1250S models require separate purchase of Handlebar End Cap P/N 55801095, 55900246, 55900247 or 55900248.

C. WILD ONE COLLECTION – RIDER FOOTPEGS

Includes Left and Right footpegs.

50502020 Rider.

Fits rider position on ’21-later RH1250S models.

50502026 Passenger.

$164.95

$164.95

Fits passenger position on ’21-later RH1250S, ’22-later RH975 and ’23-later RH975S models. RH1250S models require separate purchase of Passenger Footpeg Mount Kit P/N 50502192A. RH975 models require separate purchase of Passenger Footpeg Mount Kit P/N50502434.

D. WILD ONE COLLECTION – CAM SPROCKET MEDALLIONS

Sold as a set of two adhesive covers.

14101557

$114.95

Fits ’21-later RA1250, RA1250S, RH975, RH1250S, ’23-later RH975S, ’24-later RA1250SE and ’25-later RA1250ST models.

E. WILD ONE COLLECTION – ALTERNATOR PLUG COVER

Includes Left and Right mirror and mounting hardware.

25701181 $144.95

Fits ’21-later RA1250, RA1250S, RH975, RH1250S, ’23-later RH975S, ’24-later RA1250SE and ’25-later RA1250ST models.

F. WILD ONE COLLECTION – CLUTCH MEDALLION HDMC “dog tag” style logo adds subtle authenticity. Includes mounting hardware.

14101402 $139.95

Fits ’21-later RA1250, RA1250S, RH975, RH1250S, ’23-later RH975S, ’24-later RA1250SE and ’25-later RA1250ST models.

G. WILD ONE COLLECTION – TIMER MEDALLION Machined aluminum highlights. Includes mounting hardware.

14101398 $69.95 Fits ’21-’25 Revolution Max models.

For additional Collections that fit Sport models, see the Engine Trim and Controls sections of this catalog.

’21-later

’24-later

and ’25-later RA1250ST models. Does not fit with Passenger Footpeg Mount Kit P/N 50502192.

K. SECURITY SIREN KIT Plug in this very loud siren for additional peace of mind that your motorcycle is protected. The siren sounds an alarm when the Factory Security System is activated. Easy-toinstall plug-and-play connection to vehicles equipped with a Harley-Davidson® Factory Security System. Homologated for International use

69000124

$83.95 Fits ’21-later RA1250, RA1250S, RH975, RH975S, RH1250S and ’25-later RA1250ST models, ’17-later XG, ’02-’17 VRSC™, ’14-later XL, ’04-’17 Dyna®, ’03-later Softail® (except FXCW and FXCWC), ’02-later Touring and ’09-later Trike models equipped with H-D® Smart Security System or H-D® Factory Security System. ’21-’23 RA1250, RA1250S and RH1250S models require separate purchase of Adapter Wire P/N 69202993 and two cable ties P/N 10065. ’17-later XG models require separate purchase of mounting bracket P/N 69201473. 2002-2006 VRSCA, VRSCB, VRSCD Models require the purchase of a loop side Velcro strip, P/N 5927401.

Also available: SIREN ADAPTER WIRE

Required to install Security Siren P/N 69000124 on ’21-’23 RA1250, RA1250S, RH975S and RH1250S models. 69202993 $39.95

34 CRUISER

Windshields

A. QUICK-RELEASE COMPACT WINDSHIELD

Combine the classic Harley-Davidson® windshield shape with a revolutionary new attachment system and you have the best of style and function. The windshield mounts to the fork tubes with elegant die-cast lever-release clamps, so the windshield does not require any leave-behind docking hardware. You get quick on-and-off convenience and a clean, custom look. No tools are required and the kit includes everything needed to install the windshield. The tough, hard-coated polycarbonate windshield is available with traditional polished or gloss black horizontal and vertical braces.

Fits ’88-’22 XL (except XL1200CX, XL1200T, XL1200X, XL1200XS and ’11-’22 XL883L and XL1200C). XL1200NS requires removal of headlight visor. Also fits ’91-’05 Dyna® models (except FXDWG and FXDXT).

58063-04 18" Clear – Polished Braces. $469.95 Windshield dimensions: Overall height – 26.8"; width – 19.7".

58602-04 14" Light Smoke – Polished Braces. $459.95 Windshield dimensions: Overall height – 22.8"; width – 19.5".

36 CRUISER

Seating – Reach®

A. SUPER REACH® SOLO SEAT

Get a little bit closer. Super Reach® forward position seats are designed to move riders with a shorter inseam even closer to the controls and to bring the legs closer together so that your feet rest firmly on the pavement. After hundreds of hours of on-road and ergonomic testing, the seat shape and foam density were selected as the ideal position for riders 5’-0" to 5’-4" tall. The Super Reach Seat moves the rider 1.5" closer to the controls compared to stock seat on XL883L model, and 2" closer and .5" lower compared to stock seat on XL1200C model. The nose is 1.0" narrower than the stock seat, and it is tastefully sculpted to look great with any size Sportster® fuel tank. The combination of premium textured and smooth vinyl surfaces and charcoal gray stitching and embroidered Bar & Shield logo really set the seat apart. For the ultimate solo touring setup, add the Quick Release Rider Backrest P/N 52300245.

52000207

$276.95 Fits ’10-’22

closer together to help you plant your feet firmly on the ground. The slightly bucketed rider seat offers lower back support and features a textured insert to prevent you from sliding around while riding.

51737-07

Fits ’07-’22 XL models equipped with 2.2

38 CRUISER

D. STANDARD SISSY BAR UPRIGHT Give your passenger additional back support with a Standard Sissy Bar Upright, designed to accept a wide variety of Backrest Pads.

Fits ’04-’22 XL models with H-D Detachables sideplates, ’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG), ’84-’05 Softail (except FXSTD) and ’06-later FL Softail models (except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.

52300018 Chrome. $129.95

52300020 Gloss Black. $129.95

E. PASSENGER BACKREST PADS

Styled to complement available touring and custom seats. Fits models equipped with One Piece H-D Detachables Sissy Bar Upright P/N 52729-08, 51853-07, 51849-07, 5114610A, 51161-10A, 52300040A, 52300042A, 52300044A or 52300046A.

52631-07 Smooth Black. $99.95

F. LOW-PROFILE SISSY BAR UPRIGHT

This low and lean one-piece bar mounts between the fender and fender struts for a clean, close-to-the-bike profile. The gloss black round bar upright delivers a simple bobber look on a solo seat-equipped bike, and provides the perfect passenger “butt-stop” for a Sportster® model equipped with a low-profile two-up seat. The bar also accepts Slip-Over Pad P/N 51732-10 for added passenger comfort.

52300403 $160.95

Fits 16-’20 XL1200CX models with Original Equipment twoup seat and ’07-’22 XL models equipped with solo or Badlander® two-up seats.

40 CRUISER

Backrests & Racks

PASSENGER BACKREST PADS

Choose from a wide variety of backrest pad sizes and shapes to match your comfort and style demands. Designed to complement Original Equipment and accessory seats, these pads are engineered to fit specific sissy bar upright types.

A. BACKREST PADS

Sized to fit medallion and mini medallion-style sissy bar uprights. Pad mounts with single center screw and bolt-on mounting strap. Includes chrome-plated mounting hardware.

Fits Low Medallion Style Sissy Bar Upright P/N 52754-04 or 51851-09, Low Square Bar Mini-Medallion Style Sissy Bar Upright P/N 53282-06, Standard Square Bar Mini Medallion Style Sissy Bar Upright P/N 53281-06 or 53407-06, Standard Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98, 52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage Style Sissy Bar Upright P/N 52731-00 and Low Round Bar Sissy Bar Upright P/N 52300022 or 52300024.

1. 52652-04 Smooth. $99.95

2. 52626-04 Smooth Top-Stitched. $99.95

B. BACKREST PADS

Sized to fit medallion and mini medallion-style sissy bar uprights. Pad mounts with single center screw and bolton mounting strap. Kit includes chrome-plated mounting hardware.

Fits Low Medallion Style Sissy Bar Upright P/N 52655-84, 52909-02, 52754-04, 51851-09, Standard Medallion Style Sissy Bar Upright P/N 52735-85 or 52877-08, Standard Square Bar Mini Medallion Style Sissy Bar Upright P/N 5328106 or 53407-06, Standard Heritage Style Sissy Bar Upright P/N 52731-00 and Standard Round Bar Sissy Bar Upright P/N 52300018 or 52300020.

1. 52612-95 Smooth Top-Stitched. $99.95

Sideplates, ’84-’05 Softail® models (except FLSTN and FXSTD) and ’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC models and ’06 FLSTF models equipped with Detachable Sideplates.

42 CRUISER

Saddlebags & Luggage

A. RIGID LEATHER LOCKING SADDLEBAGS

The push-button latching swing-out lid is easy to operate with one hand and the fine leather surface and brushed chrome medallion add an elegant touch. The hard-shell design retains its shape in all kinds of weather and is covered in leather for a traditional look. Locking hinged lids offer modern convenience and security. Kit includes reflectors. Luggage Capacity: 2400 cubic inches total.

90201321

$949.95

Fits ’04-’22 XL models (except XL1200CX, XL1200T, XL1200V and International (non-Canadian) XL883N, XL1200N or XL1200X models and models with Rear Axle Covers). Models with side-mount license plates require License Plate/Turn Signal Relocation Kit P/N 73279-10. ’11’20 XL1200C models require Turn Signal Relocation Kit P/N 67800071 (Domestic) or 67800077 (International). All other models require separate purchase of Turn Signal Relocation Kit P/N 68732-02A (Domestic), 68733-02A (International) or Layback License Plate Kit P/N 60215-06. Models equipped with H-D® Detachables™ accessories require separate purchase of Docking Hardware Kit P/N 53544-04 (if not already equipped).

B. BLACK STANDARD LINE THROW-OVER

SADDLEBAGS

Made of ultra-durable leather-like synthetic featuring a debossed H-D #1 logo, the Black Standard Bags have a simple, black on black style that complements many styling directions and budgets. An internal reinforcement system maintains the bag’s shape over time. The “MOLLE-style” system of mounting loops accommodates hook and loop straps and allows for multiple mounting locations and orientations. The bags feature matte black enamel buckles with hidden quickdetach buckles underneath. These Throw-Over Bags feature side gussets for increased capacity and straight and perpendicular mounting loops for easy mounting. Quick-release buckles get you in and out of the bag fast. These Throw-Over Bags can be used with or without a passenger pillion. If used with a passenger pillion, the straps should be mounted under the pillion and the crossover straps feature a soft, non-scratch backing. Installation requires purchase of Saddlebag Support rails and may require the purchase of a Turn Signal Relocation Kit. Large bag measures: 16.5" L x 11.5" H x 7" D. Internal capacity: 1,350CI. Weight capacity: 10 lbs/bag. Compact bag measures: 10" L x 11.5" H x 5.25" D. Internal capacity: 600CI. Weight capacity: 6 lbs/bag. Fits ’82-’22 XL (except XL1200T), ’08-’17 Dyna® (except FLD), ’84-’99 Softail®, and ’18-later Softail models equipped with H-D® Saddlebag Supports. ’18-later Softail models require purchase of Turn Signal Relocation Kit P/N 67800802 or 68700830.

90201770 Large. $299.95

C. SADDLEBAG SUPPORTS

Keep your throw over-style saddlebags away from the wheel, swingarm and brake caliper. Can be installed on models equipped with rigid-mount sissy bar sideplates and uprights.

90201324 Chrome. $119.95 Fits ’00-’22 XL models (except

NOTE: Some Harley-Davidson® saddlebags are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high-quality materials used to construct your saddlebags. The appearance of scars or marks on the leather are a result of using natural leather panels and should not be thought of as an imperfection. Please use Harley-Davidson® Leather Protectant P/N 93600034 to protect your investment.

44 CRUISER

Foot Controls

A. PASSENGER FOOTPEG MOUNT KIT – BLACK

Kit includes black mounting brackets, Original Equipmentstyle footpegs and all necessary mounting hardware.

50500270 $124.95

Fits ’14-’22 XL models.

50203-04

Fits ’04-’13 XL models.

B. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT

$174.95

Easy to adjust with common tools, the mount adjusts through a 360° range (depending on model), allowing both fore and aft and up and down height adjustment. Kit includes left and right adjustable support assembly and all required mounting hardware. Footpegs sold separately.

50763-09

$160.95

Fits models with H-D® male mount-style passenger footpeg supports (except Softail® models). Does not fit with Heel Raiser Footpeg Kit P/N 50178-09. Does not fit the rider position.

C. MINI FOOTBOARD KIT

This footboard kit can be installed in place of traditional footpegs and provides a little additional leg support and more options to move your legs around on a long ride. Mini Footboards mount to the standard H-D style footpeg supports and can be used in many rider, passenger and highway peg applications.

Fits rider position:

’02-’17 VRSC™ models with forward controls (except VRSCDX and VRSCF), ’15-’20 XG models (except XG750A), ’06-earlier XL, ’07-’10 XL883, XL883R, XL883C, XL1200C and XL1200R and ’07-’11 XL1200L, ’91-’17 Dyna® (except FLD) and ’84-’17 Softail models with forward controls (except FXCW, FXCWC, FXS, FXSB or FXSBSE).

Fits passenger position:

All models with H-D male-mount passenger peg mounts (except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna and Softail models equipped with Shotgun exhaust). ’84-’17 Softail models require separate purchase of Support Kit P/N 50454-09. Does not fit passenger position on ’18-later Softail models.

Fits highway peg position:

All models with frame-mount or engine guard-mount highway pegs (except Whiskers Adjustable Highway Bar P/N 50855-09 and 50865-09).

SPORTSTER® FOOT CONTROLS A long stretch to the controls or a knees-high cramped riding position puts strain on your body after even a short ride. Repositioning your feet on the controls relieves muscle tension, takes pressure off the tailbone, and reduces rider fatigue. Where your feet contact the controls can often determine how many miles you can put on in a day. Many Sportster® models can be equipped with the following

CONTROL KIT* Add the stretched-out look and extended riding position to your Sportster model. The complete kit includes

necessary to convert your Sportster model from

controls to forward controls. Available in your choice of finishes,

forward controls add style and long range comfort. (Footpegs and shifter peg not included.)

Fits ’14-’22 XL models. Requires separate purchase of stock or accessory rider position footpegs with wear pegs that fit ’14-’22 XL1200 models.

50700021 Black. $624.95

Fits ’06-’13 XL models with mid-controls (except XL1200CP and XL1200CA). XL1200L requires separate purchase of footpegs P/N 33134-07CAZ and 33135-07CAZ.

33395-06A Chrome. $624.95

33397-07A Black. $599.95

46 CRUISER

Engine Guards

A. FURTHER FORWARD MID CONTROL KIT

Feel a little cramped when your feet are placed on the standard-location mid controls? This kit repositions the controls

3.0" forward of the stock location, eliminating the “kneeshigh” riding attitude while maintaining a sporty upright riding posture. The forward location provides an open path for your feet to aid maneuvering the bike while parking and improves access to the jiffy stand for a shorter rider. Kit includes control mounts, brake and shift levers, brake rod, mini-footboards with wear pegs and all hardware necessary to convert your mid or forward control-equipped Sportster model.

50700028 Gloss Black. $649.95

Fits ’14-’22 XL models.

B. ENGINE GUARD*

The unique soft curve shape adds style to function. The onepiece Engine Guard is designed to complement the lines of the Sportster® motorcycle and the choice of finishes adds the perfect finishing touch. Add your choice of Engine Guard Mounted Highway Pegs (sold separately) to change your foot position on a long ride.

Fits ’04-’22 XL and XR models (except XL1200CX, XL1200T, ’16-’22 XL1200X, ’18-’20 XL1200XS and ’11-’20 XL883L). Will not fit with Front Spoilers.

49215-07 Gloss Black. $279.95

Front Axle Nut Covers

C. FRONT AXLE NUT COVERS

Cover the front axle in style. Available in your choice of styles, these custom Axle Nut Covers look great with Original Equipment satin-finish fork sliders or add the finishing touch to a complete chrome or blacked-out front end. Easy to install kits include all necessary mounting hardware. Sold in pairs. Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25 Touring (except ’23-later FLHXSE and FLTRXSE and ’24-’25 FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle

Kit P/N 43000090. ’22-later FXLRST, ’20-later

’19-later FXDRS and ’18-later FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159.

*WARNING:

Installation of

and

Notice: The prices appearing in this catalog are the manufacturer’s suggested retail prices. Actual retail prices may vary.

G Skull Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later XG, ’08-’22 XL (except ’16-’22 XL1200X and XL1200XS), ’08-’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB, FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25 Touring (except ’23-later FLHXSE and FLTRXSE and ’24-’25 FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS, ’18-later FLSB, FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159, ’22-later FXRST to models require separate purchase of Front Axle Adapter Kit P/N 43000159.

8. 43000096 Black. $49.95

9. 43163-08A Chrome. $49.95

48 CRUISER

Chassis Trim — Front End

A. DOMINION™ COLLECTION FORK STEM COVERS

Top it off with style. These easy-to-install Fork Stem Covers top off the triple tree for a cohesive look. A perfect complement to other Dominion™ Collection Accessories, these Fork Nut Covers provide the finishing touch to your bike’s front end. Sold in pairs.

Fits ’06-’17 Dyna® models (except FXDB and FXDSE) and ’18-later Softail® models (except FXDRS, FXFB, FXFBS, FXLRS, and FLSB). Also fits ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV, ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN, and ’86-’17 FLSTC models.

45800117 Gloss Black. $79.95

B. DEFIANCE COLLECTION UPPER FORK STEM COVERS

Top it off with style. These easy-to-install Fork Stem Covers continue the Defiance Collection to the top of the triple tree for a cohesive look. The deep radial grooves define the style of the Defiance Collection, and the choice of chrome, black or machine cut finishes complement your bike’s polished, chrome or blacked-out front end components. Sold in pairs.

Fits ’06-’17 Dyna models and ’18-later Softail models (except FXDRS, FXFB, FXFBS, FXLRS, FXLRS, FXLRST and FLSB). Also Fits ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL, ’16-’17 FXDLS, ’94-’05 FXDS-CONV and ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and ’86-’17 FLSTC models

45500515 Gloss Black. $59.95

C. BAR & SHIELD LOGO REAR AXLE COVERS Die-cast cover conceals the side of the swingarm and axle. Unique styling features an embossed Bar & Shield logo. Easy to install without removing the rear wheel. Kit includes all necessary mounting hardware.

Fits ’05-’22 XL883C, XL883L, XL883N, XL1200C, XL1200CX, XL1200L, XL1200N, XL1200NS, XL1200V, XL1200X and XL1200XS models. Also fits ’05-’22 XL models equipped with Low Rear Suspension Kit P/N 54731-04, 54733-04 or 5475005. (Will not fit models equipped with saddlebags or Chrome Billet Shock Hardware Kit P/N 54337-05.)

43013-09A Gloss Black. $59.95

New and improved capacitive level sensing technology provides the highest degree of accuracy and durability. Now available in chrome and black, these dipsticks allow you to check your oil level and oil temperature with the push of a button. Add function and style by replacing your stock dipstick with this hardworking version. No more grabbing a rag to pull your hot dipstick. No more oil drips on your pipes and on the garage floor. These stylish yet hard-working dipsticks allow you to check your oil level and oil temperature with the push of a button. Simply push the button and this dipstick lights up with a

replaceable lithium coin-type battery (P/N 91800066). Display features a low battery indicator and press-and-hold feature to toggle between Fahrenheit and Celsius. Fits ’04-’22 XL and XR models.

62700011A Gloss Black. $174.95

50 CRUISER

Oil Cooler & Gauges

A. COMBINATION DIGITAL SPEEDOMETER/ANALOG

TACHOMETER – 4"

Maintain the clean view over the handlebar. This unique Combination Speedometer/Tachometer allows you to monitor engine speed without additional handlebar-mounted gauges. The unit mounts in the stock dash opening and is a direct plug-in installation. The backlit gauges include a large LCD (liquid crystal display) information screen that displays odometer/tripmeter data, miles-to-empty readings, an easyto-read segmented fuel display, a gear position indicator and clock. This valuable information is available to the rider at a glance. The gauge features push-button adjustable backlighting with over 600 color tone options, allowing the rider to adjust pointer, LCD and backlighting colors to match any paint scheme or viewing preference. The digital speed reading can be easily toggled between mph and kph to simplify cross-border travel. Mileage reinstatement resides in the vehicle ECM so initial mileage will be uploaded at the time of installation.

NOTE: As a result of different vehicle capabilities, the following exceptions apply: Gear position not available on ’04-’07 models, range function not available on ’04-’06 XL models and ’04-’08 Dyna® models, fuel level function not available on ’04-’06 XL models.

70900475 Spun Aluminum Dial, MPH/km/h $349.95 U.S. models. Fits ’14-’22 XL, ’12-’17 Dyna and ’11-’17 Softail® models equipped with 4" speedometer. XL models require separate purchase of Fuel Sensor Kit P/N 61200008A to make use of the fuel level and range function.

70900100C Spun Aluminum Dial, MPH/km/h $349.95 Non-U.S. models. Fits ’14-’22 XL, ’12-’17 FXDB and FXDWG, ’11-’17 FXCWC, FXS and FXSB models with 4" speedometer. XL models require separate purchase of Fuel Sensor Kit P/N 61200008A for fuel level and range function.

70900274 Spun Aluminum Dial, MPH/km/h $349.95 Worldwide Models. Fits ’04-’13 XL (except XR, XL50 and ’04’08 XL1200R), ’04-’11 Dyna models with 4" speedometer and ’08-’10 FXCW and FXCWC models. ’07-’13 XL models require separate purchase of Fuel Sensor Kit P/N 61200008A to make use of the fuel level and range function. Does not fit XL883 models equipped with Screamin’ Eagle® 1200cc Stage I Conversion Kit P/N 29784-07 and 30003-10.

B. SPORTSTER® FUEL GAUGE KIT*

Keep an eye on your Sportster® model fuel level without watching how many miles you have traveled. In-tank sending unit employs capacitive sensing technology to accurately monitor the fuel level and relays the information to a handlebar-mounted LED indicator for at-a-glance viewing. The segmented LED display is set into a distinctive housing that replaces the brake master cylinder cover on the right hand control. The individual LED segments glow when the tank is full and count down one by one as the fuel level drops. Kit includes sending unit, LED master cylinder cover, wiring harness and all necessary installation hardware. 75031-09 Black. $319.95 Fits ’07-’22 XL and ’08-’13 XR models. ’14-’22 XL models require separate purchase of Electrical Connection Kit 72673-11.

*Some local regulations prohibit using colored lights during vehicle operation on public streets. May not conform to local lighting regulations.

D. LOUD SIDE-MOUNT HORN KIT Get noticed. Ride with increased confidence with a loud horn that will grab everyone’s attention. Engineered to be 5dB louder (at 2 meters) than the ’13-earlier Original Equipment side-mounted horn. The loud horn is stock on ’14-later models equipped with side-mount horns. Designed to be a plug-in replacement that is easy to install. Fits all H-D® side-mount horn covers.

69060-90H

$64.95

Fits ’91-’17 VRSC™, ’91-’22 XL1200C and XL1200V, ’91-’17 Dyna® (except ’14-’17 FXDL), ’91-’17 Softail® (except FLSTS, FLSTSC, FXCW, FXCWC, FXS, FXSB and FXSBSE), ’91-later Touring and ’09-later Trike models. Stock on ’14-later models equipped with a side-mount horn.

E. SIDE-MOUNT HORN KIT – CHROME

Convert your stock Sportster horn to the look of a Big Twin.

69112-95E $124.95

Fits ’92-’22 XL883, XL883C, XL883H, XL883L, XL883N, XL833R, XL1200, XL1200L, XL1200N, XL1200NS, XL1200R, XL1200V, XL1200X and XL1200XS and ’08-’13 XR models.

F. DOMINION™ COLLECTION FUEL CAPS

Add a custom touch to your tank. Styled to reflect your attitude, these fuel caps are the perfect match for your ride. The fuel cap is easy to install and features a ratcheting design to ensure that the design faces the correct direction.

Fits ’92-’22 XL, ’92-’17 Dyna® (except ’04-’17 FXD, FXDX, ’05-’06 FXDC and ’07 FXDSE), ’00-later Softail® (except FXSTD, and ’07-’08 FXSTSSE), ’94-later Road King® and ’15-later Freewheeler® models. Does not fit models equipped with Original Equipment locking or tethered fuel caps or Softail models with Low-Profile Chrome Fuel Tank Console P/N 71208-07. Use on ’13-’14 FXSBSE requires removal of stock flush mount trim ring. 61100107A Gloss Black. $119.95 61100106 Bronze. $120.05

G. FLUSH-MOUNT

52 CRUISER

Windshields

A. QUICK-RELEASE COMPACT WINDSHIELD

Combine the classic Harley-Davidson® windshield shape with a revolutionary new attachment system and you have the best of style and function. The windshield mounts to the fork tubes with elegant die-cast lever-release clamps, so the windshield does not require any leave-behind docking hardware. You get quick on-and-off convenience and a clean, custom look. No tools are required and the kit includes everything needed to install the windshield. The tough, hard-coated polycarbonate windshield is available in your choice of traditional polished or gloss black horizontal and vertical braces.

Fits ’06-’17 Dyna® (except FLD, FXDWG, FXDF and FXDSE) and ’18-later FXBB, FXBBS, FXLR and FXST models. FXDLS models require the removal of Original Equipment Wind Deflector.

58346-06 18" Clear – Polished Braces. $469.95 Windshield dimensions: Overall height – 26.8"; width – 19.7".

58348-06 14" Light Smoke – Polished Braces. $459.95 Windshield dimensions: Overall height – 22.8"; width – 19.5".

Fits ’88-’22 XL (except XL1200CX, XL1200T, XL1200X, XL1200XS and ’11-’22 XL883L and XL1200C). XL1200NS requires removal of headlight visor. Also fits ’91-’05 Dyna models (except FXDWG and FXDXT).

58063-04 18" Clear – Polished Braces. $469.95 Windshield dimensions: Overall height – 26.8"; width – 19.7".

58602-04 14" Light Smoke – Polished Braces. $459.95 Windshield dimensions: Overall height – 22.8"; width – 19.5".

B. QUICK-RELEASE SUPER SPORT WINDSHIELD

Reduces the pounding of wind and shower of bugs, but keeps the wind-in-the-hair feeling. Ideal for a cool morning ride, the sleek profile of the Super Sport Windshield hugs the front headlamp for a sporty look. The windshield mounts to the fork tubes with elegant die-cast lever locking clamps, so the windshield does not require any leave-behind docking hardware. You get quick on-and-off convenience and a clean, custom look. No tools are required and the kit includes everything needed to install the windshield.

57301-06 19" Light Smoke. $449.95 Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-later FXBR and FXBRS models. Windshield dimensions: Overall height – 25.0"; width – 20.1".

Shown with:

DOCKING HARDWARE FOR H-D DETACHABLES WINDSHIELDS

58164-96A For 39mm Forks. $86.95

Required for installation of H-D® Detachables™ Windshields on ’88-’22 XL (except XL1200CX, XL1200X, XL1200XS and ’11-’22 XL1200C) and ’91-’05 Dyna models (except FXDWG and FXDXT). XL and Dyna models with Front Turn Signals originally located on the upper triple clamp may require the additional purchase of Turn Signal Wiring Kit P/N 72389-96.

Windshields

C. SPORT WINDSHIELD KIT

Formed of polycarbonate and hard-coated to resist scratching. Light smoke windshield is contoured to fit the headlamp and incorporates adjustable four-point mounting. Functional styling helps deflect wind to reduce upper body fatigue. 58192-87A 18" Light Smoke. $224.95 Fits ’88-’22 XL (except XL883C, XL1200C, XL1200CX, XL1200T, XL1200, XL1200XS and ’11-’22 XL883L). XL1200NS requires removal of headlight visor. Also Fits ’95-’05 Dyna® models (except FXDWG and FXDXT). Includes black mounting hardware. Windshield dimensions: Overall height –18.5"; width – 16.3".

D. HEADLAMP VISOR KITS* Add an element of racy style to stock headlamps with these visors. Available in Primed or Vivid Black Harley-Davidson® paint.

Fits ’95-’22 XL (except XL883C, XL1200C, XL1200CX, XL1200V, XL1200X and XL1200XS), ’95-’05 Dyna (except FXDXT and FXDWG) and ’82-’94 FXR and FXRS models. Does not fit with Clip-On Handlebar P/N 55800647. 68129-98DH Vivid Black. $649.95

E. MID-FRAME AIR DEFLECTOR

Improve rider comfort during the summer riding season. Designed for severe duty and extreme temperature applications, these inconspicuous black deflectors attach to the frame and surround the top of the rear cylinder head. The scoop shape captures the moving air and uses the flow to direct the heat down and away from the rider to improve comfort. Kit includes all required mounting hardware.

29200011

$97.95

Fits ’06-’17 Dyna models. ’06-’11 models require removal of Original Equipment coil cover and separate purchase of Coil Mounting Screws P/N 4717A (Qty 2). Does not fit with accessory Coil Covers P/N 31709-04 or 74616-04. Does not fit with Digital Oil Pressure Gauge P/N 75138-09 or 75340-09.

ENJOY THE RIDE

The relationship between the seat, the handlebar and the foot controls has an enormous impact on the comfort, control and confidence you feel when riding your motorcycle. Once you’ve picked the bike, it’s time to choose the options that match your ride to your personal dimensions.

ESTABLISH YOUR POSITION AND FEEL

SEATS

Seat height and shape impact rider comfort, fit and confidence. Where the seat positions you relative to the foot controls, hand controls and the ground plays a major role in the quality of your ride.

HANDLEBARS

Where the bar positions your arms, hands and wrists directly impacts how you feel on the motorcycle. Choose a bar that falls easily to hand, and does not pull you out of the seat when maneuvering.

56 CRUISER

Seating – Dyna®

A. BADLANDER® SEAT

Clean smooth covers, subtle top-stitching and a framehugging profile add up to a statement only Harley could create. The low design delivers a reduced seat height that is ideal for riders who want the shortest possible reach to the ground, and the long and lean shape allows tall riders to move back from the hand and foot controls without sitting higher on the bike. Kit includes grab strap and all mounting hardware.

52284-06

$339.95

Fits ’06-’17 Dyna® models. FXD, FXDB and FXDLS models require separate purchase of Seat Bumper Kit P/N 51653-06, Passenger Footpegs and Passenger Footpeg Mounting Kit P/N 50210-06. Seat width 11.0"; passenger pillion width 5.0".

B. LOW-PROFILE LEATHER SEAT

Prowl the town in style. Featured as Original Equipment on the ’07 CVO™ Dyna® model, this low-profile seat features a breathable perforated leather insert. The firm padding makes you feel a part of the bike and the raised back stop keeps you in place when you hit the gas.

52378-07

$404.95

Fits ’06-’17 Dyna models. FXD, FXDB and FXDLS models require separate purchase of Passenger Footpegs and Passenger Footpeg Mounting Kit P/N 50210-06. Seat width 12.0"; passenger pillion width 7.0".

C. PASSENGER PILLION – SMOOTH STYLING

Bring a passenger along for the ride. This Passenger Pillion includes a passenger grab strap.

51404-10 Smooth. $199.95

Fits ’09-’17 FXDB and ’10-’17 FXDWG models with Original Equipment solo seat. Installation on FXDB models requires separate purchase of Passenger Footpegs and Passenger Footpeg Mounting Kit P/N 50210-06.

NOTE: Some Harley-Davidson® seats are made of leather. Fine

manufacturer’s

BUILDING A BACKREST

A sissy bar upright and passenger backrest are the starting point to build a complete touring machine. The backrest provides long-range comfort and support and adds a feeling of control and confidence for the passenger. Start by selecting model-specific Docking Hardware, then choose a finish that matches your styling direction, determine the desired sissy bar height and finally select a backrest pad that complements your seat.

DOCKING HARDWARE SIDE PLATES

SHORT & TALL UPRIGHT

PASSENGER BACKREST PAD

and ’06-later FL Softail models (except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE and FLSTSB and ’06 FLSTFSE) with appropriate sideplates.

52300022 Chrome. $129.95

C. STANDARD SISSY BAR UPRIGHT Give your passenger additional back support with a Standard Sissy Bar Upright designed to accept a wide variety of backrest pads.

Fits ’04-’22 XL models with H-D Detachables sideplates, ’06-’17 Dyna (except FXDF, FXDFSE and ’10-’17 FXDWG), ’84-’05 Softail (except FXSTD) and ’06-later FL Softail models (except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE and FLSTSB and ’06 FLSTFSE) with appropriate sideplates. 52300018 Chrome. $129.95 52300020 Gloss Black. $129.95

52866-06A (Chrome), 53870-01B (Chrome),

53511-06A, One-Piece

Uprights 51161-10A (Gloss Black), 52300042 (Chrome), One-Piece

Uprights 52300044A (Chrome), 52300046A (Gloss Black)

(except 2013-later HDI and India configuration) 53797-09 53968-06C

2006-later FXD, FXDC, FXDL and FXDSE, 2006-2008 FXDB 53961-06

2009-later FXDB 53797-09

2010-later FXDWG 54097-10 53968-06C

2010-later FXDWG 54097-10 53968-06C With P&A Saddlebags Adjustable Sideplates 52300110 (Chrome), 52300090 (Gloss Black), Detachable Sideplates 52124-09A (Gloss Black), 53543-95B (Chrome), 53834-00A (Wrinkle Black), 52866-06A (Chrome), Detachable Solo Rack 53511-06A, One-Piece Detachable Uprights 51161-10A (Gloss Black), 52300042 (Chrome), OnePiece Detachable Uprights 52300044 (Chrome), 52300046A (Gloss Black) With P&A Saddlebags 79300-06D, 88200-09A, 88348-10, 90181-08A, 90307-98, 90369-02, 90369-06D, 90564-02, 90564-06D, 91617-03, 91615-09A, 90126-YYXXX

60 CRUISER

Backrests & Racks

A. LOCKING H-D® DETACHABLES™ LATCH KIT

This unique lock replaces the camlock on your HarleyDavidson® Detachables™ accessories, providing additional security and peace of mind when parking your vehicle. The kit includes two extended-reach barrel-style keys for easy access to the lock. Key registration and replacement service is available. Sold in pairs.

Fits all models equipped with detachable Sideplates, Racks and Tour-Pak® Luggage Carriers (except ’18-later Softail® models with HoldFast™ racks and uprights or ’09-later Touring models equipped with detachable Solo Tour-Pak Rack).

92800008 Black. $89.95

B. H-D DETACHABLES LATCH KIT – CHROME

Decorative chrome latches are the perfect way to enhance the appearance of your detachable accessories. Meticulously polished and chrome-plated, these easy-to-install Rotary Latches are a direct replacement for the Original Equipment satin black parts and are a simple way to add a finishing touch to your ride. Latches feature an easy-to-pull finger release to simplify access in hard-to-reach areas.

12600036 $54.95

Fits all models equipped with detachable Sideplates, OnePiece Sissy Bar Uprights, Racks, and Tour-Pak Luggage Mounting Racks. (except ’18-later Softail models with HoldFast racks and uprights).

C. AIR FOIL PREMIUM LUGGAGE RACK*

The low-profile aerodynamic styling defines the look of this Luggage Rack. Available in mirror chrome or rich gloss black finish, the die-cast rear “Air Foil” grabs your attention and the Bar & Shield insert adds a signature touch. The elegant round tube rack features inlayed rubber runners for added grip and dedicated bungee mounting points to simplify luggage tie-down. Kit includes all necessary mounting hardware. For added visibility, the rack is designed to incorporate the internal wiring of the Air Foil Rack LED Light Kit P/N 68000076 (red) or 68000077 (smoked) for a clean look.

Fits ’04-’22 XL models equipped with H-D Detachables Sideplates, ’06-’17 Dyna® models (except FXDF, FXDFSE and ’10-’17 FXDWG) equipped with Detachable Sideplates, ’84-’05 Softail® (except FLSTN and FXSTD) and ’06-’17 FLST, FLSTC, FLSTNSE and FLSTSC and ’06 FLSTF models equipped with Detachable Sideplates.

54290-11 Chrome.

Also available: LED LIGHT KIT WIRING HARNESS

$230.95

Required for installation of LED Light Kit on Air Foil Luggage Rack P/N 54290-11 or 54291-11.

73415-11

$14.95

Fits ’06-’17 Dyna (except FXDF, FXDFSE, ’14-’17 FXDL, ’16-’17 FXDLS and ’10-’17 FXDWG), ’84-’05 Softail (except FXSTD and FLSTN), ’06-’17 FLST, FLSTC and FLSTSC and ’06 FLSTF models with Air Foil Luggage LED Light Kit P/N 68000076 or 68000077.

62 CRUISER

A. STANDARD FORWARD CONTROLS*

Stretch out for maximum comfort and style. This complete kit includes all components necessary to convert a mid controlequipped Dyna® model to forward controls. Moves controls 11.0" forward from mid control foot position. Kit is available in chrome or gloss black to match your customizing style.

Fits ’06-’17 Dyna models with mid controls. FLD models require separate purchase of footpegs.

49080-06A Chrome.

49021-09 Gloss Black.

B. BILLET STYLE SHIFT LEVER

$499.95

$499.95

Styled to complement our billet style mirror stems, these Billet Style Shift Levers are forged from 6061-T6 aluminum, then machined and finished in chrome for a beautiful, custom look. Includes chrome hardware.

Fits ’91-’17 Dyna (except ’14-’17 FXDL, FXDLS or models equipped with Further Forward Mid-Control Kit P/N 50500386) and ’90-’17 FX Softail® models.

34539-00 Chrome.

C. RIDER FOOTBOARD HEEL GUARD

A. STANDARD FORWARD CONTROLS –CHROME

$119.95

Avoid damaged boots and hours of cleaning melted rubber scuff marks from your exhaust shield. This Heel Guard mounts to the right-side rider footboard and The subtle curved shape keeps the boot heel away without restricting fore-and-aft movement of the rider’s foot. Kit includes chrome guard with cutaway Bar & Shield logo and all mounting hardware.

50500225 $74.95

Fits ’12-’16 FLD, ’86-’17 FL Softail®, ’86-later Touring (except ’23-later FLHX, FLHXSE, FLTRX, FLTRXSE and FLTRXSTSE and ’25-later FLHXU) and ’09-later Trike models equipped with Traditional and Swept Wing footboards. Does not fit models equipped with Half-Moon, Tapered, Airflow, Defiance, Dominion™, or Burst footboards, Extended Reach Rider Footboards P/N 50409-04 or 54145-10, Rider Running Boards P/N 50500158, or Screamin’ Eagle® Fat Exhaust Shields.

64 CRUISER

Foot Controls

A. PASSENGER FOOTPEG SUPPORT KIT –WRINKLE BLACK

Add footpegs to your solo seat-equipped Dyna® motorcycle. Kit includes left and right footpeg supports and mounting hardware. Footpegs and footpeg hardware sold separately.

Fits ’06-’17 Dyna models.

50210-06 Wrinkle Black.

B. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT

$89.95

Maximize your passenger’s riding comfort. Proper foot position reduces the cramped or stretched-out feeling and relieves pressure on the knees and the tailbone. These Adjustable Mounts raise and lower the passenger footpeg to accommodate taller and shorter passengers. Easy to adjust with common tools, the mount adjusts through a 360° range (depending on model), allowing both fore and aft and up and down height adjustment. Kit includes left and right adjustable support assembly and all required mounting hardware. Footpegs sold separately.

50763-09

$160.95

Fits models with H-D® male-mount style passenger footpeg supports (except Softail® models). Does not fit with Heel Raiser Footpeg Kit P/N 50178-09. Does not fit the rider position.

C. JIFFY STAND EXTENSION KIT

Jiffy Stand Extension Kits have been ergonomically designed to simplify the deployment and retraction of the jiffy stand. The extension is shaped to simplify locating the tab with your boot and aid in swinging the jiffy stand into position. The move feels natural and adds confidence when parking your motorcycle in a tight spot. Kit mounts to Original Equipment jiffy stand and includes all required mounting hardware.

50000032

$43.95

Fits ’93-’17 Dyna models (except FXDFSE, FXDS-CONV, FXDSE, FXDWG2, FXDWG3, FXDX, FXDXT, ’99-’00 FXR and ’01-’04 FXDL).

D. MINI FOOTBOARD KIT*

This Footboard Kit can be installed in place of traditional footpegs and provides a little additional leg support and more options to move your legs around on a long ride. Mini Footboards mount to the standard H-D style footpeg supports and can be used in many rider, passenger and highway peg applications. Sole-gripping rubber complements Original Equipment or accessory footboards and footpegs and adds vibration isolation and a rich appearance.

Fits rider position: ’02-’17 VRSC™ models with forward controls (except VRSCDX and VRSCF), ’15-’20 XG models (except XG750A), ’06-earlier XL, ’07-’10 XL883, XL883C, XL883R, XL1200C, XL1200R and ’07-’11 XL1200L, ’91-’17 Dyna models (except FLD) and ’84-’17 Softail models with forward controls (except FXCW, FXCWC, FXS, FXSB or FXSBSE).

Fits passenger position:

All models with H-D male-mount passenger peg mounts (except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna and Softail models equipped with Shotgun exhaust). ’84-’17 Softail models require separate purchase of Support Kit P/N 50454-09. Does not fit passenger position on ’18-later Softail models.

Fits highway peg position:

All models with frame-mount or engine guard-mount highway pegs (except Whiskers Adjustable Highway Bar P/N 50855-09 and 50865-09).

models. ’14-’17 FXDL, FXDLS (all markets) and ’15-’17 Dyna (India models only) require separate purchase of Horn Relocation Bracket P/N 69000058. Fits with Oil Cooler Kit P/N 26151-07B. ’07-’08 FXDSE and ’09-’10 FXDFSE requires removal of front chin spoiler and separate purchase of Regulator Caddy P/N 70464-08A. ’06-’11 models equipped with evap canister also require separate purchase of Canister Bracket P/N 47207-06. ’12-’17 models equipped with evap canister require separate purchase of Canister Relocation Kit P/N 60800005. 49010-06 Chrome. $299.95

Also available:

and

(all

and ’15-’17

(India models only) equipped with Engine Guard P/N 4901006, 49320-09, 49000077 or 49000078.

F. RIGID LOCKING LEATHER SADDLEBAGS These saddlebags combine a premium leather finish with extra-durable construction. The hard-shell design is covered in leather for a traditional look, while the locking hinged lids offer modern convenience and security. Styled to complement the sleek, narrow Dyna motorcycle profile, these bags offer plenty of storage for a trip across town or across the country. Kit includes reflectors. Luggage capacity: 2400 cubic inches total.

91615-09A $999.95 Fits ’02-’17 Dyna models (except FLD, ’02-’05 FXDWG and ’09-’17 FXDB with optional strut covers). ’02-’05 models require separate purchase of Mounting Hardware Kit P/N 92025-09. ’10-’17 FXDWG models require separate purchase of Turn Signal Relocation Kit P/N 68544-10. ’13-’17 FXDB models equipped with side-mount license plate requires License Plate Relocation Kit P/N 67900130. All other years and models (except FXDF and FXDWG) require separate purchase of Turn Signal Relocation Kit P/N 68732-02A (Domestic), 68733-02A (International) or Layback License Plate Kit P/N 60215-06. Not for use with Rear Axle Covers on FXDF and FXDWG models.

ALSO AVAILABLE: TURN SIGNAL RELOCATION KIT

Kit moves turn signals from rear fender struts to a license bracket-mounted turn signal bar.

Required to install Saddlebags P/N 91615-09A, 88200-09A, 90181-08A, 90460-06B, 79300-06D, 90564-06D, 9036906D, and 88343-10. Fits ’02-’17 Dyna (except FXDF, FXDWG and ’09-’17 FXDB) and ’04-’22 XL models (except XL883N, XL1200N, XL1200NS, XL1200X, XL1200XS and ’11-22

The

66 CRUISER

Chassis Trim – Front End

A. PREMIUM TANK PANEL WITH POUCH

This leather tank panel features an over-sized pouch for convenient at-your-fingertips storage. The heavy-duty leather pouch will maintain its shape for miles to come while the bold chrome Bar & Shield medallion sits proudly on the flap for all to admire.

91135-09 $139.95

Fits ’93-’08 FXDWG, ’06 FXD35, ’07-’17 FXDC and FXDF and ’00-’17 Softail® models (except FLS, FLSS, FLSTNSE, FLSTSB, FLSTSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD, FXSTSSE, ’09-’17 FLSTC and ’06 FLSTFSE). ’93-’03 FXDWG models require the separate purchase of Clip P/N 10102 and O-Ring P/N 11174.

B. LOWER BELT GUARD COVER – CHROME Designed to cover the Original Equipment black lower debris deflector, this mirror chrome-finished cover adds an exceptional finish to the rear drive components. Kit includes required mounting hardware.

60514-07A Fits ’07-’17 Dyna® models. $79.95

Also available: UPPER BELT GUARD – CHROME

Hand-polished and chrome-plated to replace your factoryequipped black upper belt guard.

60293-00 Fits ’00-’05 Dyna models.

Notice:

68 CRUISER

Color-Matched Quarter Fairing

A. SOFTAIL® QUARTER FAIRING

This street performance-inspired Quarter Fairing is designed to reduce drag while providing a sleek, custom look. With a Dark Smoke windscreen featuring a Harley-Davidson script on the lower leading edge, it provides the wind protection you need to go all day while looking sinister in the process. Fits ’18-later FXBB and FXLR, ’20-later FXLRS, FXST and ’21-later FXBBS models. Requires separate purchase of model specific Fairing Bracket Kit. FXBB models require separate purchase of Turn Signal Brackets P/N 12700164 and 67800630 and Hardware P/Ns 67015-02 (qty 2), 7155 (qty 1) and 7331 (qty 1). Does not fit FXBB or FXLR models equipped with Moto Bar P/Ns 55800856 or 55800858 when using Original Equipment handlebar risers. FXLR models equipped with Moto Bar P/Ns 55800856 or 55800858 and Tall Risers P/N 55800852 or 55800854 require separate purchase of Turn Signal Brackets P/N 12700164 and 67800630.

QUARTER FAIRING BRACKET KIT

This matte black bracket kit is required for mounting the Quarter Fairing to your motorcycle. 57001249

Fits ’18-later FXBB, FXBBS, FXLR and FXST. FXBB, FXBBS and FXST installation requires separate purchase of Turn Signal Brackets P/Ns, 12700164 and 67800630 and Hardware P/Ns 67015-02 (qty 2), 7155 (qty 1) and 7331 (qty 1). FXLR models with Tall Risers/Moto Bars require separate purchase of Turn Signal Brackets P/Ns 12700164 and 67800630 and Hardware P/N 67015-02 (qty 2).

57001250 $121.84

Fits ’20-later FXLRS models. Does not fit FXLRS models with Tall Risers and Moto Bars. Also compatible with 5.75" Headlight Bucket P/N 67700380, Trim Ring, Screw and Lock Nut P/N 67700375, 3383 and 7606.

DEFY THE WIND

At highway speed, you take the wind full-force in the chest, causing fatigue in your arms, neck and shoulders. Take the pressure off with an easy-to-install detachable windshield.

Shaped to divert air, rain and road debris around the rider, a windshield can add hours of riding comfort.

SUPER SPORT

Eliminates wind and debris, but keeps the wind-inthe-hair feeling. Ideal for a cool morning ride to the office, the sleek profile hugs the front lamps for a sporty look.

COMPACT

Traditional king-sized shape with a minimalist edge.

For Harley-Davidson® custom and cruiser models, the Compact windshield provides wind and weather protection for every day riding.

READY FOR TAKE-OFF

Designed to be installed or removed without tools in seconds, a detachable windshield gives you the freedom to define your ride at the drop of a hat. Ride across the country protected from the elements, then quickly remove the windshield to hit the streets in style.

To avoid looking through bug spots, condensation and road grime, select a windshield that tops out just below your line of sight.

Shaped for effective airflow management, Wind Splitter windshields feature a "flip" at the upper edge to help reduce helmet buffeting at speed.

Nothing gets past this one. The King Size windshield is the ultimate in on-road protection. Available in a variety of shield heights, the road can’t lay a finger on you.

70 CRUISER

Windshields – Super Sport

A. WIND SPLITTER QUICK-RELEASE SUPER SPORT WINDSHIELD

Shaped with just the right mix of width and height to reduce the pounding air pressure against your chest, the Wind Splitter Super Sport Windshield allows you ride comfortably while maintaining the wind-in-the-hair feeling. The windshield’s contoured design incorporates a flipped upper edge that manages airflow and turbulence across the top of the shield. The flip adds additional wind shear lift, and effectively provides the protection of a taller windscreen. Ideal for a cool morning ride, the sleek profile of the Super Sport Windshield hugs the front headlamp for a sporty look. And because the windshield mounts to the fork tubes with elegant die-cast leverlocking clamps, you get quick on-and-off convenience and a clean, custom look. Kit includes the hard-coated polycarbonate screen, brackets and quick-release docking clamps.

57400323 19" Light Smoke – Polished. $409.95 Fits ’18-later FXBB, FXLR, ’14-’17 FXDL, ’20-later FXST and ’21-later FXBBS models. Does not fit FXLRS. Windshield dimensions: Overall height – 24.4"; width – 17.5".

57400334 19" Light Smoke – Polished. $409.95 Fits ’18-later FXBR and FXBRS models. Windshield dimensions: Overall height – 24.4"; width – 17.5".

B. QUICK-RELEASE SUPER SPORT WINDSHIELD

Reduces the pounding of wind and shower of bugs, but keeps the wind-in-the-hair feeling. Ideal for a cool morning ride, the sleek profile of the Super Sport Windshield hugs the front headlamp for a sporty look. The windshield mounts to the fork tubes with elegant die-cast lever locking clamps, so the windshield does not require any “leave-behind” docking hardware. You get quick on-and-off convenience and a clean, custom look. No tools are required and the kit includes everything needed to install the windshield.

57301-06 19" Light Smoke. $449.95 Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-later FXBR and FXBRS models. Windshield dimensions: Overall height – 25.0"; width – 20.1".

Windshields – Compact

C. WIND SPLITTER QUICK-RELEASE COMPACT WINDSHIELD

Engineered to provide the riding comfort of a larger windshield, this Wind Splitter Windshield features a contemporary contour that sets it apart from the crowd. The compact shape is designed to keep the windshield below your line of sight so you don’t need to look through bugs and road grime,

72 CRUISER

Windshields – Compact

A. WIND SPLITTER DETACHABLE COMPACT WINDSHIELD

Shaped to divert headwinds around the rider, this compact windshield moderates the air pressure against your chest and reduces the strain on your arms during a long highway ride. Designed to provide the riding comfort of a larger windshield, this Wind Splitter Windshield features flipped upper edge to manage the airflow and turbulence across the top of the shield. The flip adds additional wind shear lift to provide the protection of a taller windscreen. The compact size is the perfect compromise between function and style on the road, and the detachable design means you can ride without the shield when you prefer a wind-in-the-hair experience. The hard-coated polycarbonate windshield mounts to the fork triple trees with rubber isolators to reduce vibration and to provide quick tool-free on-and-off installation. Kit includes all mounting hardware.

Fits ’18-later FLFB and FLFBS models.

57400368

Fits ’18-’24 FXFB and FXFBS models.

57400324 19" Clear – Black. $499.95 Windshield dimensions: Overall height – 23.2"; width – 18.9".

57400330 15"

B. LIGHT SMOKE WINDSHIELD – 10"

Hit the highway with all-day comfort. This windshield maintains the cool style of the Low Rider® ST while enhancing rider protection from wind, rain and debris. The windshield is 4” taller than the stock Low Rider ST windshield to provide added rider protection from wind, rain and debris. The Light Smoke finish does not interfere with forward vision. Made from a durable polycarbonate material that is protected by a hard-coat, scratch-resistant layer. The factory design maintains sleek lines of the fairing and offers an ideal fit.

57400505 $219.95 Fits ’22-Later FXLRST and FXRST models.

74 CRUISER

Switchback Seating

Add

style complements any custom direction.

52000652

$399.95

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXST, FXBB and FXBBS models.

B. SWITCHBACK SEAT – U STITCH – DELUXE, HERITAGE, SOFTAIL SLIM, STREET BOB AND STANDARD

Take your custom style up a notch. This one-piece, two-up seat features premium smooth black vinyl with a stitched-in pattern in a bold U pattern on the rider and passenger seating surface, a multi-panel design and contrasting stitching throughout. The one-piece, two-up design incorporates rider seat and pillion. The stitched U pattern on the tops of seating surfaces adds contrast and visual detail. Smooth black premium vinyl with contrasting stitching and rubber Bar & Shield logo. Fastback profile.

52000759

$499.95

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXST, FXBB and FXBBS models.

C. SWITCHBACK SEAT – RED STITCH – DELUXE, HERITAGE, SOFTAIL SLIM, STREET BOB AND STANDARD

Take your custom style up a notch. This one-piece two-up seat features contrasting vinyl patterns, performance red stitching and a modern interpretation of the classic tuck-and-roll upholstery pattern. One-piece two-up design incorporates rider seat and pillion. Seam-sealed construction prevents rain or wash water from infiltrating the seat foam in critical areas. Debossed tuck and roll pattern on seating surface. Smooth black vinyl seating surface. Textured vinyl side panels. Contrasting Performance Red stitching. Performance Red rubber Bar & Shield logo. Fastback profile.

52000789 $499.95

Fits '18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models and '24-later FLI models. '24-later FLI requires removal of original equipment seat rail.

76 CRUISER

Seating – Reach® & Tallboy®

REACH TWO-UP SEATS

Designed to position riders with a shorter inseam closer to the ground, Reach Two-Up Seats are shaped to place the rider in a comfortable and confident relationship to the hand and foot controls. The wide seating surface provides loads of support and the narrow tapered nose brings the rider’s legs together for an easier reach to the ground at a stop. These Reach Two-Up Seats feature a stepped profile that keeps the rider from sliding rearward during acceleration, and a generous raised passenger position that cradles the tailbone for hours of riding comfort. The rich vinyl seating surface is accented with a classic Harley-Davidson® medallion.

A. REACH TWO-UP SEAT – SPORT GLIDE® STYLING

Designed to look like a separate solo seat and pillion, this smooth vinyl one-piece Reach Two-Up Seat perfectly complements the sweeping lines of the Low Rider® model. Measurements as compared to other seating options: Stock ’18 Low Rider model seat – 0.5" lower, 1.5" forward.

and

TALLBOY® TWO-UP SEATS

The correct riding position can help a tall rider sit comfortably on the bike and avoid leg cramps and back strain during a long day in the saddle. For riders with a longer inseam, a Tallboy Seat moves the rider up and back from the stock seating position to eliminate the “knees-high” riding position and effectively place the body for a natural arm and leg reach to the controls. Tallboy Seats feature a bucket-shaped design and a wide seating surface to reduce pressure on the rider’s tailbone, without looking bulky or overstuffed. And the passenger pillion is shaped and padded to maximize passenger comfort. The rich vinyl seating surface is accented with a round HarleyDavidson medallion.

B. TALLBOY TWO-UP SEAT – DELUXE, HERITAGE, SOFTAIL SLIM® AND

Measurements

models and '24-later FLI models. '24-later FLI requires removal of original equipment seat

Seat width 16.0" passenger pillion width 11.25".

$619.95 Fits '18-later FLFB, FLFBS, FXBR, and FXBRS models. Seat width 16.5" passenger pillion width 10.75".

E. HAMMOCK ADJUSTABLE RIDER BACKREST

Add back support to the Harley Hammock seat for longhaul riding comfort. This contoured backrest pad is shaped to provide full lower back

SUNDOWNER™ SOLO SEATS

Ride sun-up to sun-down in comfort and style. The Sundowner™ Solo Seat’s shape and foam density were developed and refined during hundreds of hours of test rides and ergonomic evaluations. The unique seat features a deep bucket design that cradles the tailbone and provides back support for the rider. The narrow nose of the seat was sculpted to bring the legs closer together, and to look great where it meets the tail of the fuel tank. The seats are constructed with premium vinyl surfaces for comfort and durability.

A. SUNDOWNER SOLO SEAT – FAT BOY®

Smooth vinyl and double row stitched side panels define the look of the Sundowner Solo Seat for Fat Boy® models, and perfectly complement the Original Equipment passenger pillion. Or for additional passenger comfort, team this seat with the matching Sundowner Pillion P/N 52400170.

52000293 $299.95

Fits ’18-later FLFB and FLFBS models. Seat width 16.25".

B. BADLANDER® SEAT

Clean smooth covers, subtle top-stitching and a framehugging profile add up to a statement only Harley could create. The low design delivers a reduced seat height that is ideal for riders that want the shortest possible reach to the ground, and the long and lean shape allows tall riders to move back from the hand and foot controls without sitting higher on the bike. This seat is wrapped in water-resistant vinyl and finished with an embroidered Harley-Davidson script. Kit includes grab strap and all mounting hardware.

52000300 $339.95

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models. FLDE, FLSL, and FXBB models require separate purchase of Passenger Footpegs and Passenger Footpeg Mounting Kit P/N 50500769 or 50500771.

51676-97A

THE FLEXIBILITY OF SUPPORT

DETACHING A HOLDFAST ACCESSORY

52300643 Chrome.

52300644 Gloss Black.

Fits ’18-later

52300646 Gloss Black.

84 CRUISER

Backrests & Racks

A. HOLDFAST™ SISSY BAR UPRIGHT

A sissy bar and passenger backrest pad is the starting point for building a complete touring machine. The backrest adds longrange comfort and support and provides a feeling of confidence and control for the passenger. HoldFast™ One-Piece Uprights feature an exclusive latch system that permits the backrest to be installed or removed in seconds to add versatility to your ride. The HoldFast sissy bar upright simply slips into position on the docking points, and the fingertip latches are clicked into position for a positive lock. HoldFast Sissy Bars are available in short and standard height for optimized passenger back support. A wide variety of Backrest Pads are available to match your comfort or customizing requirements, and the kit includes a matching 3-point backrest pad mount bracket.

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models. Installation requires separate purchase of model-specific Docking Hardware Kit.

52300442 Standard-Height, Chrome. $229.95

52300446 Standard-Height, Gloss Black. $229.95

52300448 Short, Gloss Black. $229.95

Fits ’18-later FLFB, FLFBS, FXBR, FXBRS and '25 FLSTFI models. Installation requires separate purchase of modelspecific Docking Hardware Kit.

52300437 Standard-Height, Chrome. $239.95

52300439 Standard-Height, Gloss Black. $239.95

52300441 Short, Gloss Black. $239.95

Fits ’18-later FXFB and FXFBS models. Installation requires separate purchase of model-specific Docking Hardware Kit.

52300454 Standard-Height, Gloss Black. $239.95

52300456 Short, Gloss Black. $239.95

Fits ’18-later FLSB, FXLR, FXLRS, FXLRST and FXRST models. Installation requires separate purchase of model-specific Docking Hardware Kit. 52300432

B. ONE-PIECE TALL RIGID MOUNT SISSY BAR

Strap on your bed roll or your backpack, and hit the road. This classic paper-clip style sissy bar is the perfect finishing touch to a stripped-down bobber motorcycle build. The 21" tall sissy bar features a rolled steel upright that is welded to the rigidmount side plates for a custom-made look. Bolted directly to the fender struts, the upright offers a narrow profile and a clean installation. Designed to complement two-up and soloseat equipped motorcycles, this sissy bar kit includes installation hardware for Passenger Backrest Pad P/N 52300504 (pad sold separately). Available in your choice of gloss black or chrome finish, kit includes installation hardware.

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models. Does not fit with Boom!™ Audio Cruiser Amp & Speaker Expansion Kit P/N 76000666 or 76000700. 52300502 Gloss Black. $232.95

C. PASSENGER BACKREST PAD – 21" TALL SISSY BAR

Add a comfortable back stop for your passenger. This easy-toinstall minimalistic pad utilizes the mounting strap included with the Tall Sissy Bar for a clean, tidy look. The smooth vinyl covered pad is styled to complement a wide variety of stock and accessory seats.

52300504

$89.95

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models equipped with Rigid Mount Tall Sissy Bar Upright P/N 52300502 or 52300503.

Sized to fit both Low and Standard-Height HoldFast Sissy Bar Uprights, these Mid-Sized Backrest Pads feature a gentle curved shape that cradles the spine and provides hours of passenger comfort. Pad height 7.0"; width 6.75". Fits ’18-later

52933-97C or 52805-97B, Tall H-D Detachables Passenger Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Sissy Bar Upright 52300257 or 52300258.

52300733

look. The mirror-finished bracket, chrome-plated mounting hardware and Vivid Black insert contrasts with a leather or vinyl backrest pad to dress your Touring bike in style.

52825-05 $59.95 Fits Touring models (except '21-later FLH, '23-later

86 CRUISER

Backrests & Racks

A. SPORT LUGGAGE RACK FOR HOLDFAST™ SISSY BAR UPRIGHTS*

Smooth sweeping curves and the brilliant chrome or gloss black finish defines the look of this Sport Luggage Rack. Designed to complement both short and standard-height HoldFast Sissy Bar Uprights, this sleek rack adds a practical and stylish touch to the motorcycle. When firmly bolted to the HoldFast Sissy Bar system, the combined backrest and luggage rack can be installed or removed from the bike in seconds for a truly versatile touring or cruising machine. For convenient packing, the side supports of these round bar racks are slotted to accept nylon luggage tie-down straps.

Fits ’18-later FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS and FXST models equipped with HoldFast Sissy Bar Upright.

50300124B Chrome. $224.95

50300125B Gloss Black. $224.95

Fits ’18-later FLFB, FLFBS, FXBR, FXBRS and '25 FLSTFI models equipped with HoldFast Sissy Bar Upright.

50300127B Gloss Black. $224.95

Fits ’18-later FLSB, FXFB, FXFBS, FXLR, FXLRS and FXLRST models equipped with HoldFast Sissy Bar Upright.

50300130B Chrome. $224.95

50300131B Gloss Black. $224.95

B. HOLDFAST™ LOCKING LATCH

Secure your valuables. This locking system allows you to protect your HoldFast Sissy Bar, Luggage Rack or Tour-Pak® Mounting Rack from theft, providing security and peace of mind when parking your vehicle. The kit includes (2) keys and (1) locking mechanism

Fits ’18-later Softail® models equipped with HoldFast detachable Sissy Bar, Luggage Rack or Solo Tour-Pak Mounting Rack.

52300513 Chrome. $62.95

52300514 Black. $62.95

’18-later

on outer surface offers options for clipping or tying bungees to the bags. Compatible with existing Holdfast racks, backrests, and other components. Luggage Capacity - Saddle bag volume is 30 liters. (15 lbs per bag).

FXBB, FXBBS, and FLSL DOM and CAL models require the license plate to be relocated. See instruction sheet for parts list and assembly instructions.

D. OVERWATCH QUICK-RELEASE SADDLEBAGS These saddlebags feature a classic T-Sport profile with modern features. The

88 CRUISER

Saddlebags

A. H-D® DETACHABLES™ SADDLEBAGS

Sized for commute to work or a ride across the country, these modern bags are styled to complement the stripped down look of the Softail® cruiser models. These modern waterfallstyle saddlebags are completely removable with the simple pull of the internal handle and a rearward slide, leaving your bike stripped down and unencumbered. When removed, the bag leaves behind simple, inconspicuous docking points. The bags feature a flip back lid and a reinforced vinyl-wrapped body with perforated style panels that complement stock and many accessory seats. The bags are finished with nickel snap-to-close hardware and a black chrome Harley-Davidson® signature medallion. Bags include all required mounting hardware, and can be installed with HoldFast™ sissy bars and racks when equipped with model-specific docking hardware. Luggage capacity: 2,170 cubic inches total

90201561A

$949.95

Fits ’18-’24 FLSL, FXBB, FXBBS, FXLR, FXLRS and FXST models. Does not fit FXST and FLSL models in Europe, India, or Japan. Installation requires separate purchase of License Plate/Turn Signal Relocation Kit P/N 67800802B or 67800830B.

B. H-D DETACHABLES LEATHER SADDLEBAGS –NOSTALGIC STYLE

These traditional throw-over style leather saddlebags are completely removable with the simple pull of the internal handle, leaving your bike clean and ready to cruise the boulevard. When removed, the bag leaves behind simple, inconspicuous docking points. Styled to complement the unique look of the stripped-down Softail Slim® and Street Bob® models, these bags feature a leather tub and a reinforced lid that complement stock and many accessory seats. The traditional leather straps and the brass buckles and hardware add a distinctive retro look. Bags include all required mounting hardware, and can be installed with HoldFast sissy bars and racks when equipped with model-specific docking hardware. Luggage capacity: 2,170 cubic inches total.

90201552A

$949.95

Fits ’18-’24 FLSL, FXBB, FXBBS, FXLR, FXLRS and FXST models. Installation requires separate purchase of License Plate/Turn Signal Relocation Kit P/N 67800802B or 67800830B.

Shown with:

REAR TURN SIGNAL/LICENSE PLATE RELOCATION KIT

Required for saddlebag installation on certain Softail models, these elegant sweeping mounts move the turn signals and the side-mount rearward on the fender struts, maintaining the stock lines. Available in chrome or gloss black to match the Original Equipment fender strut covers.

Fits ’18-later FLFB, FLFBS, FLSL, FXBB, FXBBS, FXFB, FXFBS, FXBR, FXBRS, FXLR, FXLRS and FXST models.

67800802B Chrome. $119.95

67800830B Black. $119.95

NOTE: Some Harley-Davidson® saddlebags are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high-quality materials used to construct your saddlebags. The appearance of scars or marks on the leather is a result of using natural leather panels and should not be thought of as an imperfection. Please use Harley-Davidson® Leather Protectant P/N 93600034 to protect your investment.

C. H-D® DETACHABLES™ LOCKING SADDLEBAGS Shaped to complement the flowing lines of the Softail® cruiser models,

90 CRUISER

Saddlebags

A. BLACK STANDARD LINE THROW-OVER SADDLEBAGS

Made of ultra-durable leather-like synthetic featuring a debossed H-D #1 logo, the Black Standard Line Bags have a simple, black on black style that complements many styling directions and budgets. An internal reinforcement system maintains the bag’s shape over time. The “MOLLE-style” system of mounting loops accommodate hook and loop straps and allow for versatility in mounting. The bags feature matte black enamel buckles with hidden quick-detach buckles underneath. These Throw-Over Bags feature side gussets for increased capacity and straight and perpendicular mounting loops for easy mounting. Quick-release buckles get you in and out of the bag fast. These Throw-Over Bags can be used with or without a passenger pillion. If used with a passenger pillion, the straps should be mounted under the pillion and the crossover straps feature a soft, non-scratch backing. Installation requires purchase of Saddlebag Support Rails and may require the purchase of a Turn Signal Relocation Kit. Large bag measures: 16.5" L x 11.5" H x 7" D. Internal capacity: 1,350CI. Weight capacity: 10 lbs/bag. Compact bag measures: 10" L x 11.5" H x 5.25" D. Internal capacity: 600CI. Weight capacity: 6 lbs/bag.

Fits ’82-’22 XL (except XL1200T), ’08-’17 Dyna® (except FLD), ’84-’99 Softail®, and ’18-later Softail models equipped with H-D® Saddlebag Supports. ’18-later Softail models require purchase of Turn Signal Relocation Kit P/N 67800802B or 68700830B.

90201770 Large.

B. SADDLEBAG SUPPORTS – GLOSS BLACK

$299.95

Required to keep your throw over-style saddlebags away from the wheel, swingarm and brake caliper. Fits with or without Sissybar Uprights.

90201777 $119.95

Fits ’18-later FLSL, FXBB, FXBBS and FXST models. Required with Throw-Over Saddlebags P/Ns 90201770 or 90201769.

C. OVERWATCH THROW-OVER SADDLEBAGS

Perfect for a road-trip weekend or the daily commute, these convenient Throw-Over bags are designed to be easy to install or remove from the motorcycle and can be zipped off their yoke to carry away with convenient built-in handles. Constructed from 1680 denier, UV-stable, PVC-backed nylon. Adjustable Yoke fits below or over passenger seat. Zippers on each side of the yoke make it easy to release the bags to carry into home, hotel or work. Roll-top waterproof liners protect gear from the weather. Liners are high-visibility gray color, making the bag contents visible even in low light. Zippered pocket in each bag lid to hold small items such as keys or wallet. Laser-cut MOLLE system on bag tops and ends provide mounting options for straps, bungee cord or carabiners to secure gear externally. Rugged quick-release buckles secure the lids. Luggage capacity: 700 cubic inches per bag, 6 pound load rating per bag.

90202693

$399.95

Fits MY22-later RH975 and RH975S. Fits ’00-later XL models (except XL1200CX, XL1200S, XL1200T, and ’02-’03 XL883R) and ’94-’15 XL models (except XL1200S, XL1200T, and ’02’03 XL883R) without H-D® Detachables™. Fits ’08-later Dyna® models (except FLD) without H-D Detachables sissy bars or racks. Fits ’18-later FLSL, FXBB, FXBBS and FXST. All fitments require model specific H-D Saddlebag supports.

leaving behind mounting points that are barely visible. The bags can also be locked to the bike from the inside and locked closed externally by keying the included lock set to match the vehicle key. Includes mounting hardware 90202838DH $1,499.95 Fits ’25-later FXLRS

NOTE: Some Harley-Davidson® saddlebags are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high-quality materials used to construct your saddlebags. The appearance of scars or marks on the leather is a result of using natural leather panels and should not be thought of as an imperfection. Please use Harley-Davidson Leather Protectant P/N 93600034 to protect your investment.

ish Swingarm Bags eliminate the need to stuff your pockets or bungee a bag across the passenger pillion. Shaped to hug the contour of your bike’s frame, these compact bags add an old-school look. Bags are constructed of heavyweight leather and feature a pouch-style

SINGLE-SIDED SWINGARM BAG –

SINGLE-SIDED

90201567 $249.95

Fits ’00-later Softail models (except FLSTC, FLSTNSE, FLSTSE, FXDRS, FXCW, and FXCWC). Does not fit models equipped with left-hand toolbox, passenger footboards, chrome swingarm covers, saddlebags, or saddlebag guards.

92 CRUISER

Saddlebags

A. SADDLEBAG TRAVEL-PAKS – HERITAGE MODEL

Simplify packing and unpacking your motorcycle. Made from water-resistant material, these liners are designed to fit into the Original Equipment saddlebags on Heritage Classic models and Softail® Deluxe Rigid Mount Saddlebags P/N 90201558. The Travel Pak bags feature two-way zippers for easy access, and embossed Bar & Shield patches for style.

93300107

$66.95

Fits ’18-later FLHC and FLHCS models with Original Equipment saddlebags. Also fits FLDE models equipped with Softail Deluxe Rigid Mount Saddlebags P/N 90201558.

B. SADDLEBAG TRAVEL-PAKS – SPORT GLIDE® MODEL

Simplify packing and unpacking your motorcycle. These wellconstructed water-resistant bags are designed to fit perfectly into the Sport Glide® model’s saddlebags. The soft sides conform to the interior of the luggage to help use every available inch of space. Styled with a Bar & Shield logo, these bags feature heavy-duty zippers, comfortable carrying handles and convenient D-rings for optional shoulder straps.

93300110

$71.95

Fits ’18-later FLSB and ’22-later FXLRST models. Also fits ’18later FXLR and FXLRS models equipped with ST Saddlebags P/N 90202534.

C. SADDLEBAG GUARDS

Saddlebag guards provide a style borrowed from the past that makes a unique statement here and now. Includes mounting hardware and instructions.

Fits ’18-later FLHC and FLHCS models.

90201312 Chrome. $299.95

90201315 Black. $299.95

NOTE: Some Harley-Davidson® saddlebags are made of leather. Fine leathers or other natural materials WILL gain “character,” such as wrinkles or wear, with age. This is normal. A fine, aged patina and character wrinkles are a sign of the extremely high-quality materials used to construct your saddlebags. The appearance of scars or marks on the leather is a result of using natural leather panels and should not be thought of as an imperfection. Please use Harley-Davidson Leather Protectant P/N 93600034 to protect your investment.

94 CRUISER

Suspension

A. SCREAMIN’ EAGLE® SOFTAIL® SUSPENSION TUNED BY ÖHLINS® FRONT KIT*

Now you can experience the ultimate in handling and ride quality with this Screamin’ Eagle/Öhlins Double Cartridge Fork Kit. Converts the Original Equipment front suspension with high-performance components from the suspension experts at Öhlins®. Provides superior ride quality and adjustability to match your riding style. Set the sag with the adjustable preload then fine tune the response with adjustable compression and rebound damping.

• External adjustment for compression, rebound damping and preload

• Compression in the left leg

• Rebound in the right leg

• Easy to dial up performance adjustments based on riding style and weight of rider and gear

• Fully serviceable and repairable by Öhlins

• Kit includes left and right cartridge, springs and oil. Installation tools sold separately. Installation by authorized Harley-Davidson® dealer highly recommended due to required specialty tools.

Fits ’18-Later Softail models with inverted front forks. Does not fit FXDR114 models. Installation by authorized HarleyDavidson® dealer highly recommended due to required specialty tools.

45400355

$1,249.95

Fits '18-Later Softail models with traditional front forks.

Installation by authorized Harley-Davidson dealer highly recommended due to required specialty tools.

45400356 $1,249.95

B .DIAMOND LIKE CARBON COATING FORK TUBES*

Upgrade front suspension performance with these highspec front fork tubes. The SHOWA® Diamond-Like Carbon (DLC) coating treatment reduces friction to improve fork response and durability, for an improvement in both comfort and handling. The black coating gives your bike a high-performance look and the hard Diamond Like Carbon (DLC) coating resists corrosion and pitting. A super-smooth surface reduces friction in suspension action.

Fits ’18-later FXBB, FXLR, FXBR, and FXBRS, ’20-later FXST, ’21-later FXBBS models.

45500921 Conventional Forks.

$649.95

Fits ’18-later FXFB and FXFBS, ’20-later FXLRS, ’22 FXRST, and ’22-later FXLRST models.

45500920 Inverted Forks. $749.95

C. SCREAMIN’ EAGLE®/ÖHLINS® REMOTE RESERVOIR REAR SUSPENSION*

Experience the ultimate in handling and ride quality with this Screamin’ Eagle/Öhlins Remote Reservoir Rear Shock. This mono tube remote reservoir coil-over shock is adjustable to match your riding style. Set the sag with the adjustable preload then fine tune the response with adjustable compression and rebound damping. These shocks perform great and add a performance style with a remote reservoir and exposed adjusters. Expertly tuned by Öhlins and Screamin’ Eagle with the aggressive Softail® rider in mind.

• No tools required for preload, compression and rebound damping adjustments so changes can be made quickly and easily

• Use external adjuster to set suspension preload for optimal performance based on rider, passenger, and gear weight

• Adjustable compression damping on the remote reservoir

• Adjustable rebound damping on bottom of shock body

• 46mm piston diameter

• Hard-anodized precision CNC-machined components

• High-pressure nitrogen gas-charged design resists heat fading and low-friction shaft/seal head design for smooth performance

• Fully serviceable and repairable through Öhlins

EAGLE/ÖHLINS

SUSPENSION

96 CRUISER

MID-CONTROLS FOR SOFTAIL® MODELS

Moving foot pegs and controls from a forward to mid location on the motorcycle puts you in better position position for aggressive riding. These mid-control options are a perfect solution for performance-oriented Softail model customization and will not compromise vehicle function or handling. Mid-Controls in Original Equipment and Accessory configurations can be mixed or matched depending on vehicle customization and additional accessories.

A. ORIGINAL EQUIPMENT MID-CONTROLS

These Mid Control Kits place the shift side and brake side midcontrol components in the Original Equipment configuration.

50501988 Brake Side.

$319.95

Fits ’18-later FLSB, FXFB and FXFBS models. Requires separate purchase of Original Equipment Mid-Controls - Shift Side P/N 50502090 and Screamin’ Eagle® High Flow Exhaust System P/N 64900828 or P/N 64900829 or a custom exhaust system.

50502090 Shift Side.

$213.95

Fits ’18-later FLSB, FXFB and FXFBS models. Requires separate purchase of Original Equipment Mid-ControlsBrake Side P/N 50501988 and Screamin’ Eagle High Flow Exhaust System P/N 64900828 or P/N 64900829 or a custom exhaust system. Also requires separate purchase of Primary Housing P/N 36500105 and Primary Cover P/N 25700937, 25700941, 25700851 or 25700850 and necessary hardware and gaskets per service parts manual. Dominion™ Primary Covers will require separate purchase of Oil Fill Insert Kit P/N’s 25700804, 25700805, 25700806, or 25700807. ’18 FXFB and FXFBS require separate purchase of Cover P/N 25700933 and Gasket P/N 25701080, except when installing Dominion Primary Covers.

B. ACCESSORY MID-CONTROLS

These Mid-Control Kits place the shift side and brake side mid-control components in an Accessory configuration that can be installed without changing other components on the motorcycle.

50502040 Brake Side. $584.95

Fits ’18-later FLSB, FXFB, FXFBS, and FXDRS models. Requires separate purchase of Accessory Mid-ControlsShift Side P/N 50502041.

50502041 Shift Side. $425.95

Fits ’18-later FLSB, FXFB, FXFBS, and FXDRS models. Requires separate purchase of Accessory Mid-ControlsBrake Side P/N 50502040.

A. BILLET STYLE REAR BRAKE LEVER – FORWARD CONTROLS

Styled to complement our billet style mirror stems and hand and foot controls, these slotted Rear Brake Levers are forged from aluminum, then machined and polished for a beautiful, custom look. Available in your choice of satin black powder coat or edge cut black anodized and machined aluminum finishes. Brake pedal pads sold separately.

Fits ’18-later Softail® models equipped with forward controls (except FXBR and FXBRS). Also fits ’18-’24 FXBB, FXBBS, and FXLR models and ’20-’24 FXLRS, FXLRST and FXST models equipped with Standard Forward Control Kits P/N 50700060 or 50700061.

41600219

41600220

B. HEEL SHIFTER LEVER

Add the convenience of a heel shifter to your footboardequipped Softail model. This traditional Heel Shifter Lever permits you to upshift with a downward tap of your boot heel –eliminating the need to wedge your toe under the forward lever and reducing wear on the top of your boot. Styled to match the Original Equipment toe shifter, this easy-to-install kit includes the heel shift lever, extended shifter shaft, shifter peg and mounting hardware.

33600224 Chrome. $114.95 Fits ’18-later FL Softail models equipped with footboards.

33600314 Satin Black. $114.95 Fits ’18-later FL Softail models equipped with footboards.

100 CRUISER

Foot Controls

A. PASSENGER FOOTPEG SUPPORT KIT

Add footpeg to your solo seat-equipped ’18-later Softail® motorcycle. Available in chrome or gloss black finish, the kit includes left and right footpeg supports and mounting hardware. Footpegs and footpeg hardware sold separately.

Fits ’18-later Softail (except FXDRS) models. Does not fit with Swingarm Pivot Bolt Cover P/N 61400344.

50500769 Gloss Black. $113.95

B. PASSENGER FOOTBOARD SUPPORT KIT

Add the comfort and convenience of passenger footboard to your motorcycle. These brackets and supports are designed to allow installation of Passenger Footboards (sold separately). Brackets and Supports are sold separately.

50501118 Black. $119.95

Fits ’18-later FLDE, FLHC, FLHCS and FLSB models. Requires separate purchase of Passenger Footboard Supports and Passenger Footboards.

C. PASSENGER FOOTBOARD PAN KIT – BLACK

Complete the blacked-out transformation. Replace your chrome Passenger Footboard Pans with sinister black. Kit includes left- and right-side Footboard Pans and is installed using the Original Equipment hardware. Custom Footboard Inserts and Footboard Supports sold separately.

Fits ’06-’17 Dyna®, ’18-later Softail (except FXDRS, FXFB and FXFBS) and ’86- later Touring models equipped with passenger footboard supports. Does not fit Trike models.

D. TRADITIONAL PASSENGER FOOTBOARD PANS

Replace the factory black painted passenger footboard with the custom look of smooth chrome. The kit includes leftand right-hand traditional D-shaped footboard pans, ready to install with your Original Equipment hardware. Footboard inserts and footboard supports sold separately.

50501799 Gloss Black. $199.95 Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and FXFBS) and ’86-later Touring and Trike models equipped with passenger footboard supports.

E. HALF-MOON PASSENGER FOOTBOARD PANS AND INSERTS

Styled to match the Half-Moon Rider Footboards, these classic passenger footboards add both style and comfort to your nostalgic ride. Available in mirror-finish chrome or gloss black finish, the kit includes left and right footboard pan and vibration-isolation footboard inserts. Model-specific footboard mounts are sold separately.

Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and FXFBS) and ’86-later Touring models equipped with passenger footboard supports. Does not fit Trike models. 50810-08 Gloss Black. $209.95

F. SWEPT WING PASSENGER FOOTBOARD PANS

These unique Swept Wing Passenger Footboard pans complement the Swept Wing Rider Footboard shape and allow you to replace the Original Equipment passenger footpegs on certain models with footboards. When

102 CRUISER

Chassis Trim – Front End

A. HARLEY-DAVIDSON® AUDIO POWERED BY ROCKFORD FOSGATE® – INNER FAIRING AUDIO KIT

A high-performance motorcycle deserves high-output audio. This kit was designed alongside the Low Rider® ST for outstanding performance and an ideal fit within the fairing. A powerful, intelligent amplifier with digital signal processing (DSP) technology developed jointly by Harley-Davidson and Rockford Fosgate is engineered to perform in the demanding motorcycle environment. Connects to your mobile device via Bluetooth to play stored or streaming audio through a pair of built-in two-way speakers.

- Marine grade two-way speakers include a pair of 5.25” woofers and two remote tweeters aimed at the rider’s ears for great audio performance

- Lightweight design has minimal impact vehicle dynamics and performance

- Plug-and play installation. One assembly includes the amplifier, speakers and housing, which replaces the original equipment inner fairing.

- Two simple wiring connections power the unit

- Uses Bluetooth 4.2 for a strong wireless connection to most devices with minimal compression for outstanding sound quality

- Connectivity with the Harley-Davidson Audio powered by Rockford Fosgate mobile app offers unique features like Automatic Volume Control (AVC), adjustable 7-Band EQ, and step by step system configurator.

- Compact amplifier mounts within the fairing. 250 watts of amplifier power (125 x 2 @ 4ohms / 125 x 2 @ 2ohms) for crisp, clear sound quality at any volume. Overcomes bike, environment, and helmet sound-limiting variables at all speeds

76200037

$1,149.95 Fits ’22-later FXLRST models. Original Equipment on FXRST models.

B. FAT BOY® NACELLE KIT

Take your Fat Boy model in a new styling direction. Manufactured from Original Equipment components for a perfect fit, these Nacelle Kits are a direct replacement for the stock satin chrome nacelle. The 3-piece kit includes nacelle housing and two back panels. Black Headlamp Bezel P/N 61400509 is sold separately.

61300811 Gloss Black. $319.95 Fits ’18-later FLFB and FLFBS models.

C. UPPER FORK SLIDER COVERS – CHROME When used with H-D® Genuine Motor Accessory Chrome Lower Fork Sliders, you’ve got a front end that’s completely chromed and an appearance that’s utterly impressive. Kit includes left and right cover.

45800133 Chrome. $102.95 Fits ’18-later FLFB and FLFBS models.

D. UPPER FORK SLIDER COVERS – GLOSS BLACK

Manufactured from Original Equipment components for superior fit, the black finish matches the available black fork sliders and nacelle kit for a unified look. Kit includes left and right cover.

45800134 Gloss Black. $102.95 Fits ’18-later FLFB and FLFBS models.

E. LOWER FORK SLIDERS – CHROME Form follows function, with polished, chrome-plating and a stamped Harley-Davidson logo for product identification. A perfect addition during the installation of Profile® Low Front suspension components, this kit includes right and left sliders, bottom axle retainer, axle retainer bolts and oil seals.

45500400 $524.95

Fits ’18-later FLDE, FLHC, FLHCS and FLSL models.

45500402 $524.95 Fits ’18-later FLFB and FLFBS models.

F. LOWER FORK SLIDERS – GLOSS BLACK

Manufactured to Original Equipment specifications, the durable black coating is a great match to other H-D black components. A perfect addition during the installation of Profile Low

FRONT AXLE NUT COVERS

Cover the front axle in style. Available in your choice of styles, these custom Axle Nut Covers look great with Original Equipment satin-finish fork sliders or add the finishing touch to a complete chrome or blacked-out front end. Easy-to-install kits include all necessary mounting hardware. Sold in pairs.

Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25 Touring (except ’23-’25 FLHXSE and FLTRXSE and ’24-’25 FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS and ’18-later FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159.

A. DOMINION™ COLLECTION

Express your bold, renegade attitude. The machined aluminum Dominion Collection Front Axle Nut Covers add style to the front of the bike and are the perfect complement to other Dominion Collection accessories.

43000124 Gloss Black. $74.95

B. FRONT AXLE NUT COVERS

1. 44117-07A Chrome – Die-cast.

Also available: Willie G Skull Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-’22 XL (except ’16-’22 XL1200X and XL1200XS), ’08-’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB, FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25 Touring (except ’23-’25 FLHXSE and FLTRXSE and ’24-’25 FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS, ’18-later FLSB, FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159, ’22-later FXRST to models require separate purchase of Front Axle Adapter Kit P/N 43000159.

7. 43000096 Black. $49.95

8. 43163-08A Chrome. $49.95

Required for Installation:

FRONT AXLE COVER INSTALLATION KIT

Required for installation of accessory Front Axle Covers on ’18-later Softail models. Kit includes threaded axle spacer, left and right adapters and all hardware.

43000090 Hollow-axle. $23.95

Required for installation of Front Axle Nut Covers on ’18-later Softail® models. Does not fit FLSB, FXDRS, FXFB, FXFBS and FXLRS, FXLRST and FXRST models.

43000159 Inverted Forks. $23.95

Required for installation of Front Axle Nut Covers on ’18-later FLSB, FXFB and FXFBS, ’19-’20 FXDRS, and ’20-later FXLRS, FXLRST and FXRST models.

C. REAR AXLE NUT COVERS – WILLIE G SKULL Fits ’08-’17 Dyna® and ’08-later Softail® models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later

Fits ’08-’17

and ’08-later Softail models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS). 41705-09

A. REAR FENDER SUPPORTS

Make a bold statement on the rear of your bike by swapping out the stock Fender Supports for these chrome or black versions. Manufactured from Original Equipment components to ensure superior fit and finish, these Fender Supports continue your styling direction to the back of the bike. These Fender Supports are the ideal finishing touch and the perfect complement to available gloss black or chrome passenger sissy bars and luggage racks.

59500769

59500767

59500771

Improve rider comfort during the summer riding season. Designed for severe duty and extreme temperature applications. Inconspicuous black deflectors attach to the frame and surround the top of the rear cylinder head. Scoop shape captures the moving air and uses the flow to direct the heat down and away from the rider to improve comfort. Compatible with Original Equipment and Harley-Davidson® accessory seats and rocker covers. Kit includes all required mounting hardware.

29200105 $106.95 Fits ’18-later Softail® models. Does not fit with Solo Spring Saddles P/N 52000320 and 52000314.

108 CRUISER

Windshields – FX Softail® & Springer™

A. QUICK-RELEASE SUPER SPORT WINDSHIELD

Reduces the pounding wind and shower of bugs, but keeps the wind-in-the-hair feeling.

57301-06

$449.95

Fits ’06-’17 FXDWG, ’13-’17 FXSB and FXSBSE and ’18-’20

FXBR and FXBRS models. Windshield dimensions: Overall height – 25.0"; width – 20.1".

B. H-D® DETACHABLES™ COMPACT WINDSHIELD FOR SOFTAIL® SPRINGER MODELS

Fits ’97-’03 FLSTS, ’05-’07 FLSTSC and ’93-’09 FXSTS, FXSTSB and ’09 FXSTSSE models. Installation requires the separate purchase of Windshield Docking Hardware Kit P/N 58907-96B (chrome) or 58165-09 (black). (Will fit with or without auxiliary lighting.) Will not fit with Chrome Billet Mini Tach Mounts.

58770-96 18" Clear – Polished Braces.

$419.95 Windshield dimensions: Overall height – 26.8"; width – 19.9".

Shown with:

DOCKING HARDWARE FOR H-D DETACHABLES WINDSHIELDS

Required for installation of H-D Detachables Windshields on ’97-’11 FLSTS, FLSTSB and FLSTSC and ’93-’09 FXSTS, FXSTSB and ’09 FXSTSSE models.

C. KING-SIZE NOSTALGIC H-D DETACHABLES WINDSHIELD FOR FL SOFTAIL® MODELS

Formed from hard-coated polycarbonate to resist scratching, this one-piece windshield features a nostalgic horseshoeshaped outer brace with stylized Bar & Shield logo. The highly polished mounting brackets attach easily with the included mounting hardware and after initial installation, the windshield can be removed and re-attached without tools in seconds. H-D Detachables Windshields are available in 21" and 18" versions to match your need for wind protection.

Fits ’05-’17 FLS, FLSS and FLSTN, ’86-’17 FLSTC, ’00-’17 FLSTF, FLSTFB, FLSTFBS, and ’06 FLST models with or without auxiliary lamps. Does not fit with Custom Auxiliary Lighting Kit P/N 68000051. Additional mounting hardware not required.

57140-05 20" Clear. $429.95 Windshield dimensions: Overall height – 26.3"; width – 23.1". 57141-05 20" Light Smoke. $419.95 Windshield dimensions: Overall height – 23.4"; width – 23.1".

D. WIND SPLITTER VENTED WINDSHIELD Reduce helmet buffeting at speed. The Harley-Davidson® Detachables™ Wind Splitter Vented Windshield features an exclusive fingertip-adjustable center vent that reduces turbulence behind the windscreen. When open, the controlled airflow fills the negative pressure area behind the shield and helps to smooth the flow of air over the top of the screen and around the rider. The revised flow reduces helmet bobbing and neck fatigue so you can comfortably spend more time in the saddle. The open vent also provides cooling airflow to the rider at low speeds and in city traffic.

57400159 $474.95 Fits ’00-’17 FLSTC and FLS, FLSS, FLST, FLSTF, FLSTFB, FLSTFBS and FLSTN

and FLSTFBS models equipped with auxiliary lighting. Does not fit with Custom Auxiliary Lighting Kit P/N 68000051. Includes mounting hardware.

57400112 21"

your existing windshield for your riding preference. Replace the original windshield with a screen sized to improve wind protection. Uses your existing mounting brackets and hardware for an easy, economical conversion. Fits ’86-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, ’06 FLST and ’93-’96 FLSTN equipped with a H-D Detachables King-Size Windshield. Does not fit Springer models. 58277-95 18" Light Smoke. $179.95

G. WINDSHIELD ACORN NUT KIT Kit contains 10 chrome-plated low crown 12-24 acorn nuts. 94111-95 $13.95 Fits Compact, King-Size, Convertible and Road King® windshields. (Pkg. of 10.)

H. MID-FRAME AIR DEFLECTOR Improve rider comfort during the summer riding season. Designed for severe duty and extreme temperature applications, these inconspicuous black deflectors attach to the frame and surround the top of the rear cylinder head. The scoop shape captures the moving air and uses the flow to direct the heat down and away from the rider to improve comfort. Kit includes all required mounting hardware. 29200008A $106.95 Fits ’08-’17 Softail® models (except FXCW, FXCWC, FXSB, FXSBSE and FXSE).

110 CRUISER

Seating

SUNDOWNER™ SEATS

The Sundowner Seat provides the maximum in long-riding comfort. The deep-bucket design puts your body in the proper touring position and the generous padding makes it comfortable for both the rider and passenger as the miles are adding up. The dished shape provides added rider back support and the wide passenger pillion is shaped to minimize pressure points.

A. SUNDOWNER SEAT – SMOOTH

The smooth vinyl cover features elegant top-stitching to complement most Harley-Davidson® saddlebags and luggage.

51468-06A $379.95

Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, and ’06-’15 FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. Does not fit FLSTSE models. FLSTSB models require separate purchase of Passenger Footpeg Mounting Kit P/N 50932-08 and passenger footpegs. Seat width 16.5"; passenger pillion width 12.5".

51764-06

$379.95 Fits ’00-’17 FLST, FLSTC, FLSTNSE, FLSTSC, ’00-’06 FLSTF and ’00-’05 FX Softail® models (except FXSTD). Also fits FLSTN models with removal of stock luggage rack. Seat width 16.5"; passenger pillion width 12.5".

B. SUNDOWNER SEAT – BLACKLINE™ & SOFTAIL SLIM® MODELS

The smooth vinyl cover features elegant top-stitching to complement most Harley-Davidson saddlebags and luggage.

52000011 $379.95

Fits ’11-’17

SEAT

Clean smooth covers, subtle top-stitching and a framehugging profile add up to a statement only Harley could create. The low design delivers a reduced seat height that is ideal for riders who want the shortest possible reach to the ground, and the long and lean shape allows tall riders to move

FXST, FXSTB, FXSTC, FXSTS and ’07-’08 FXSTSSE models. Does not fit FLSTSE models. FLSTSB models require separate purchase of Passenger Footpeg Mounting Kit P/N 50932-08

BUILDING A BACKREST

A sissy bar upright and passenger backrest are the starting point to build a complete touring machine. The backrest provides long-range comfort and support and adds a feeling of control and confidence for the passenger. Start by selecting model-specific Docking Hardware, then choose a finish that matches your styling direction, determine the desired sissy bar height and finally select a backrest pad that complements your seat.

DOCKING HARDWARE SIDE PLATES

BACKREST PAD SHORT & TALL UPRIGHT

(except Heritage Softail® Saddlebags P/N 9087605). Requires separate purchase of Docking Hardware Kit and may require Directional Relocation Kit. See chart for your application.

53810-00D Chrome. $189.95

SISSY BAR UPRIGHTS

Sissy Bar Uprights are available in a variety of shapes and styles. Round bar uprights feature a mini medallion bar and an embossed Bar & Shield insert. Uprights are designed to accept specific 3-bolt or 2-bolt mounted backrest pads.

B. LOW SISSY BAR UPRIGHT

Shaped to complement a thicker passenger pillion, the ideal match for touring style seats, this upright also offers additional height options to riders with custom style seats.

Fits ’04-’22 XL models with H-D Detachables sideplates, ’06-’17 Dyna® (except FXDF, FXDFSE and ’10-’17 FXDWG), ’84-’05 Softail® (except FXSTD) and ’06-’17 FL Softail models (except ’07-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS, FLSTSE and FLSTSB and ’06 FLSTFSE) with appropriate sideplates. 52300022 Chrome. $129.95

C. STANDARD SISSY BAR UPRIGHT Give your passenger additional back support with a Standard Sissy Bar Upright designed to accept a wide variety of backrest pads.

Fits ’04-’22 XL models with H-D Detachables sideplates, ’06-’17 Dyna (except FXDF,

Saddlebags

Sideplates 53810-00C (Chrome), 53857-00B (Wrinkle Black), 54258-10A (Gloss Black), Solo Detach Rack 53649-05A (Chrome), 53612-08, 53652-05 (Black), One-Piece Detach Sissy Bar Upright P/N 53618-05 (Chrome), 52729-08 (Black), FXS One-Piece Sissy Bar P/N 52828-11, 52760-11, Solo Detach Tour-Pak® Rack 53559-04B or Two-Up Detachable Tour-Pak Rack 54051-08A, 53066-00D.

With P&A Saddlebags Detachable Sideplates 53810-00C (Chrome), 53857-00B (Wrinkle Black), 54258-10A (Gloss Black), Solo Detach Rack 53649-05A (Chrome), 53612-08, 53652-05 (Black), One-Piece Detach Sissy Bar Upright P/N 53618-05 (Chrome), 52729-08 (Black), Solo Detach Tour-Pak Rack 53559-04B, Two-Up Detachable Tour-Pak Rack 54051-08A, 53066-00D.

With P&A Saddlebags 53015-05, 53061-00A, 88237-07, 88238-07, 88263-07, 88286-07, 90058-05, 90114-00A, 90119-00A, 90130-00B, 90133-06B, 90200765, 90200816, 90201389, 90320-00B, 90384-04, 90384-06, 90388-04, 90419-08, 91536-00A, 91537-00A, 91555-01A, 92000-00B and 92015-03.

With Original Equipment Saddlebags Detachable Sideplates 53815-00A (Chrome), Adjustable Sideplates 52300001 (Chrome), Solo Detach Rack 53649-05A (Chrome), 53652-05 (Black), Solo Detach Tour Pak Rack 53559-04B or Two-Up Detachable Tour Pak Rack 54051-08A, 53066-00D with Original Equipment Saddlebags or with P&A Saddlebags P/N 90876-05.

Detachable Sideplates and Hard Saddlebags 90715-08XX.

FXST, FXSTB, FXSTS, FXSTSSE, FXSTC, FLSTF, FLSTFB, FLSTFBS, FLSTSB, 2006 FLSTFSE

2013-2017 FXSB, FXSBSE, 2016-later FXSE 52300239 Not Required

2006 FLSTFSE, 2003-2017 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FXST, FXSTB, FXSTC, FXSTS, 2007-2008 FXSTSSE 53930-03B

54268-10 Chrome Black

2005-2017 FLST, FLSTN 53930-03B Not Required

2005-2007 FLSTSC

FLSTF, FLSTFB, FLSTFBS

Included with Hard Saddlebags Detachable Sideplates and Hard Saddlebags 90725-08XX. 2008-2017 FLSTN 53930-03B Not Required

*See fitment for Saddlebag Kits P/N 88237-07, 88238-07 or 88306-07.

114 CRUISER

Backrests & Racks

PASSENGER BACKREST PADS

Choose from a wide variety of backrest pad sizes and shapes to match your comfort and style demands. Designed to complement Original Equipment and accessory seats, these pads are engineered to fit specific sissy bar upright types.

A. BACKREST PADS

Sized to fit round bar sissy bar uprights, these pads mount to mini medallion-style uprights with two mounting holes.

Fits Nightster® model standard and short uprights P/N’s 52300702 and 52300700. Fits Standard Round Bar MiniMedallion Style Upright P/N 52877-10 or 51168-10. Fits Low Round Bar Mini Medallion Style Sissy Bar Upright P/N 52300401, 52540-09A, 51477-06, 54256-10, 52300049 and 52300050.

51641-06 Smooth Top-Stitched. $99.95

B. BACKREST PADS

Sized to fit medallion and mini medallion-style sissy bar uprights. Pad mounts with single center screw and bolton mounting strap. Kit includes chrome-plated mounting hardware.

Fits Low Medallion Style Sissy Bar Upright P/N 52655-84, 52909-02, 52754-04, 51851-09, Standard Medallion Style Sissy Bar Upright P/N 52735-85 or 52877-08, Standard Square Bar Mini Medallion Style Sissy Bar Upright P/N 5328106 or 53407-06, Standard Heritage Softail® Style Sissy Bar Upright P/N 52731-00 and Standard Round Bar Sissy Bar Upright P/N 52300018 or 52300020.

1. 52612-95 Smooth Top-Stitched. $99.95

2. 52412-79A Embossed Bar & Shield Logo. $109.95

3. 52348-97 Heritage Classic Bucket. $129.95

4. 51132-98 Smooth Bucket. $118.95

C. BACKREST PADS

Sized to fit medallion and mini medallion-style sissy bar uprights. Pad mounts with single center screw and bolt-on mounting strap. Includes chrome-plated mounting hardware.

Fits Low Medallion Style Sissy Bar Upright P/N 52754-04 or 51851-09, Low Square Bar Mini-Medallion Style Sissy Bar Upright P/N 53282-06, Standard Square Bar Mini Medallion Style Sissy Bar Upright P/N 53281-06 or 53407-06, Standard Medallion Style Sissy Bar Upright P/N 52735-85, 53007-98, 52655-84, 52909-02 or 51517-02, Standard Bar & Shield Style Sissy Bar Upright 52739-83 or 51514-02, Standard Heritage Style Sissy Bar Upright P/N 52731-00 and Low Round Bar Sissy Bar Upright P/N 52300022 or 52300024.

1. 52652-04

models equipped with Detachable Sideplates.

Fits ’06-’17 Dyna (except FXDF, FXDFSE, ’14-’17 FXDL, ’16-’17 FXDLS and ’10-’17 FXDWG), ’84-’05 Softail (except FLSTN and FXSTD), ’06-’17 FLST, FLSTC and FLSTSC and ’06 FLSTF models with

P/N 68000076 or 68000077.

E. LOCKING H-D

LATCH KIT This unique lock replaces the cam lock on your HarleyDavidson® Detachables™ accessories, providing additional security and peace of mind when parking your vehicle. The kit includes two extended-reach barrel-style keys for easy access to the lock. Key registration and replacement service is available. Sold in pairs.

Fits all models equipped with detachable Sideplates, Racks and Tour-Pak® Luggage Carriers (except ’18-later Softail models with HoldFast™ racks and uprights or ’09-later Touring models equipped with detachable Solo Tour-Pak Rack). 92800008 Black. $89.95

F. H-D DETACHABLES LATCH KIT – CHROME Decorative chrome latches are the perfect way to enhance the appearance of your detachable accessories. Meticulously polished and chrome-plated, these easy-to-install Rotary Latches are a direct replacement for the Original Equipment satin black parts and are a simple way to add a finishing touch to your ride. Latches feature an easy-to-pull finger release to simplify access in hard-to-reach areas.

12600036

$54.95

Fits all models equipped with detachable Sideplates, OnePiece Sissy Bar Uprights, Racks, and Tour-Pak Luggage Mounting Racks (except ’18-later Softail models with HoldFast racks and uprights).

G. REAR

116 CRUISER

Saddlebags & Luggage

A. BLACK STANDARD LINE SWINGARM BAG

Made of ultra-durable leather-like synthetic featuring a debossed H-D #1 logo, the Black Standard Collection Bags have a simple, black on black style that complements many styling directions and budgets. An internal reinforcement system maintains the bag’s shape over time. The “MOLLEstyle” system of mounting loops accommodate hook and loop straps and allow for multiple mounting locations and orientations. The bags feature either matte black enamel buckles with hidden quick-detach snaps or a hook and loop flap closure. This Swingarm Bag features matte black buckles with hidden, quick-release buckles underneath. Straight and perpendicular mounting loops provide versatile and easy mounting. This bag is great for storing a small set of tools or additional layers of riding gear. Bag dimensions: 11" W x 11" H x 3.25" D. Internal capacity: 250CI. Weight/Carrying Capacity: 5 lbs. 90201768 $143.95 Fits ’00-’17 Softail® models (except FLSTC, FLSTNSE, FLSTSE, FXCW, and FXCWC models). Does not fit models equipped with rear axle covers, left-hand tool box, passenger footboards, chrome swingarm covers or saddlebag guards. FLSS and FLSTFBS models require removal of Original Equipment Rear Axle Covers.

B. BLACK STANDARD LINE THROW-OVER SADDLEBAGS

Made of ultra-durable leather-like synthetic featuring a debossed H-D #1 logo, the Black Standard Collection Bags have a simple, black on black style that complements many styling directions and budgets. An internal reinforcement system maintains the bag’s shape over time. The “MOLLEstyle” system of mounting loops accommodate hook and loop straps and allow for multiple mounting locations and orientations. The bags feature matte black enamel buckles with hidden quick-detach buckles underneath. These ThrowOver Bags feature side gussets for increased capacity and straight and perpendicular mounting loops for easy mounting. Quick-release buckles get you in and out of the bag fast. These Throw-Over Bags can be used with or without a passenger pillion. If used with a passenger pillion, the straps should be mounted under the pillion and the crossover straps feature a soft, non-scratch backing. Installation requires purchase of Saddlebag Support rails and may require the purchase of a Turn Signal Relocation Kit. Large bag measures: 16.5" L x 11.5" H x 7" D. Internal capacity: 1,350CI. Weight capacity: 10 lbs/ bag. Compact bag measures: 10" L x 11.5" H x 5.25" D. Internal capacity: 600CI. Weight capacity: 6 lbs/bag. Fits ’82-’22 XL (except XL1200T), ’08-’17 Dyna® (except FLD), ’84-’99 Softail®, and ’18-later Softail models equipped with H-D® Saddlebag Supports. ’18-later Softail models require purchase of Turn Signal Relocation Kit P/N 67800802B or 68700830B.

Keep the contents of your existing soft-sided saddlebags safe from the grab-and-go thief. This unique kit features two extrasmall barrel locks that can replace existing saddlebag snaps to perform double duty as locks or as snaps when you don’t need to lock your bags. Can be keyed to match your barrelstyle ignition key. Sold in pairs.

Fits most soft-sided leather and vinyl saddlebags. Does not fit FLHRC and FLHRS.

90300017

A fine,

patina and

are a sign of the extremely high-quality materials used to construct your saddlebags. The appearance of scars or marks on the leather are a result of using natural leather panels and should not be thought of as an imperfection. Please use Harley-Davidson® Leather Protectant P/N 93600034 to

pouch-style flap lid that is secured with two traditional straps and buckles. The semi rigid-backed bag is secured to the left side of the bike with easy-to-install adjustable straps. Luggage capacity: 450 cubic inches total.

D. SINGLE-SIDED SWINGARM BAG – ANTIQUE BROWN LEATHER

Crafted from supple brown pull-up leather, this classic Swingarm Bag will gain character and a well-worn authentic look with use. The flip-open lid is secured with traditional straps and buckles, and the bag features antique hardware that complements the old-school look.

Stretch

for

custom look. When combined with the available Extended Reach Brake Lever, long-limbed riders can straighten their legs and ride in comfort. Kit includes a front and rear lever and mounting hardware.

33600001 Chrome. $199.95 Fits ’86-’17 FL Softail®, ’88-later Touring and ’08-later Trike models.

B. BILLET STYLE HEEL/TOE SHIFT LEVER –STANDARD LENGTH

Styled to complement our billet style mirror stems, these Billet Style Shift Levers are forged from 7075-T6 aluminum, then machined and polished for a beautiful, custom look. Available in your choice of mirror chrome, satin black powder coat or edge cut black anodized and machined aluminum finishes. Kit includes a front and rear lever and chrome hardware.

Fits ’86-’17 FL Softail, ’88-later Touring

Conceal the

end of the shifter shaft when you remove the heel shift lever. The easy-to-install chrome-plated aluminum billet cap is held in place with a flush Allen® screw for a clean look.

35471-05 $24.95 Fits ’82-’17

are P/N 50305-02, 5035904, 50370-04, 50474-03, 50500-03, 50506-03, 50576-05, 50695-08 or 50935-07. FLSTN, FLSTSB and FLSTSC require separate purchase of stock FXCW footpegs with wear pegs (P/N 51327-08 Left Peg, 51323-08 Right Peg and 33130-07A Wear Peg (Qty 2)). Does not fit with Profile® Low Suspension.

E. RIDER FOOTBOARD HEEL GUARD This Heel Guard mounts to the right-side rider footboard and protects your boot from contact with the hot exhaust shield. Kit includes chrome guard with cutaway Bar & Shield logo and all mounting hardware.

50500225 $74.95 Fits ’12-’16

120

A. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS BLACK

Add the finishing touch to your blacked-out ride. This Gloss Black Shift Linkage is easy to install and includes a transmission lever cover and decorative acorn nuts and bolts for a complete custom look.

33600259 $119.95

Fits ’86-later Softail® (except ’18-later FXBB, FXLR, FXLRS and ’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 FLSTS or models equipped with Softail Extended Reach Forward Controls.)

B. CUSTOM GEAR SHIFT LINKAGES

Kick your custom into gear with this collection of high-quality custom shift linkages. Available in a variety of designs to match your bike’s style, these linkages feature aircraft-quality rod ends for easy adjustment and smooth operation. The easy-to-install linkage kit also includes a transmission lever cover for ’86-’17 Softail and ’86-’16 Touring and Trike models, and decorative acorn nuts and bolts for a complete custom look.

Fits ’86-later Softail (except ’18-later FXBB, FXLR, FXLRS and ’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 FLSTS or models equipped with Softail Extended Reach Forward Controls.)

1. 34018-08 Slotted Black Anodized. $149.95

2. 34850-09 Skull. $154.95

3. 33801-09 Harley-Davidson Script. $139.95

4. 33760-09 Slotted with Bar & Shield Logo. $149.95

5. 33814-98A Round. $104.95

C. PASSENGER FOOTPEG MOUNT KIT

A necessary addition when converting your solo seat model to a two-up passenger-carrying ride. Kit includes black mounting brackets and all necessary mounting hardware. Footpegs sold separately.

50932-08 $79.95

Fits ’12-’17 FLS, FLSS and ’08-’11 FLSTSB models.

122 CRUISER

Chassis Trim

A. PREMIUM TANK PANEL WITH POUCH

This leather tank panel features an over-sized pouch for convenient, at your fingertips storage. The heavy duty leather pouch will maintain its shape for miles to come while the bold chrome Bar & Shield medallion sits proudly on the flap for all to admire.

91135-09

$139.95

Fits ’93-’08 FXDWG, ’06 FXD35, ’07-’17 FXDC and FXDF and ’00-’17 Softail® models (except FLS, FLSS, FLSTNSE, FLSTSB, FLSTSE, FXCW, FXCWC, FXS, FXSB, FXSBSE, FXSE, FXSTD, FXSTSSE, ’09-’17 FLSTC and ’06 FLSTFSE). ’93-’03 FXDWG models require the separate purchase of Clip P/N 10102 and O-Ring P/N 11174.

B. UPPER FORK SLIDER COVERS – CHROME Brilliant chrome accents for the upper fork legs. Perfect for finishing off that chromed front end look. When used with H-D® Genuine Motor Accessory Chrome Lower Fork Sliders, you’ve got a front end that’s completely chromed and an appearance that’s utterly impressive.

45963-97

$84.95

Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF (except ’07), FLSTFB, FLSTFBS and FLSTN and ’80-’13 Touring and Trike models. Stock on FLSTNSE and FLSTSE models.

C. UPPER FORK SLIDER COVERS – GLOSS BLACK

The classic Harley-Davidson® motorcycle color is black. It shows your attitude, your feelings and your desire to be different from the rest. These gloss black accessories are the ultimate extension of the Harley-Davidson philosophy. Manufactured from Original Equipment components, these parts provide superior fit and finish.

45591-02

$84.95

Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF (except ’07), FLSTFB, FLSTFBS, FLSTNSE and FLSTN, ’10-’12 FLSTSE and ’80-’13 Touring and Trike models.

D. ABS HARNESS COVER – CHROME

Dress your ABS-equipped Softail model in style. Shaped to conceal the ABS wheel speed sensor harness, this bracket mounts to the brake caliper tabs on the lower fork sliders. The mirror chrome finish complements the Original Equipment satin polished sliders or serves as the final finishing touch to a complete chrome front end.

32700002

Fits ’11-’17 Softail® models (except FXCWC, FXSB and FXSBSE) equipped with ABS.

$49.95

process of securing your bike to a trailer or bike lift. These stylish chrome Tie-Down Brackets mount cleanly to the front fork cover and offer a secure method to connect tiedown straps. Moving the tie-down point from the handlebar to the triple tree area reduces wear on the handlebar bushings and ensures a consistent easy-to-access mounting point. Just add Harley-Davidson® Ratchet Straps and Soft Hooks and you’re ready to go.

93500006 $83.95

Fits ’02-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, ’95-later FLHR and FLHRC, ’95-’13 FLHT, FLHTC and FLHX, ’10-’13 FLHTCU and FLHTK ’10-’12 FLHXSE and ’10-’12 FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models without a windshield require separate purchase of Hardware Kit P/N 91800030.

Shown with:

TIE-DOWN BRACKET HARDWARE KIT

Kit includes 4 button-head bolts required for installation of Chrome Tie-Down Brackets P/N 93500006 on specified models.

91800030 $11.95

Required for installation of Chrome Tie-Down Bracket Kit P/N 93500006 on ’00-’17 FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models without windshields.

G. FORK COVER ACCENT STRIPS – GLOSS BLACK

These strips are designed to add the ultimate complement to the Gloss Black Fork Cover Kit. Finished in matching rich black, these extruded aluminum pieces fill the gap between the front and rear covers that is created when the passing lamps are removed. Strips are sold individually and two are required for a complete installation.

68055-10BHP

$24.95

Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and FLSTFBS ’93-’96 FLSTN models with Gloss Black Fork Cover Kit P/N 48608-09. (Does not fit with passing lamps or windshields.)

Shown with:

HEADLAMP SHELL – GLOSS BLACK

Add to the sinister look of your blacked-out Softail® motorcycle. Manufactured from Original Equipment components, this gloss black headlamp housing replaces the chrome headlamp shell for a custom look. Shell includes wiring harness and connector and accepts the Original Equipment headlamp, trim ring and mounting hardware.

73294-10

$219.95

Fits ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF, FLSTFB and FLSTFBS and FLSTN models in domestic and right-hand drive markets.

124 CRUISER

Chassis Trim – Front End

A. FRONT AXLE NUT COVERS

Cover the front axle in style. Available in your choice of styles, these custom Axle Nut Covers look great with Original Equipment satin-finish fork sliders or add the finishing touch to a complete chrome or blacked-out front end. Easy-to-install kits include all necessary mounting hardware. Sold in pairs. Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-later Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS and ’18-later FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159.

DOMINION™ COLLECTION

Express your bold, renegade attitude. The machined aluminum Dominion™ Collection Front Axle Nut Covers add style to the front of the bike and are the perfect complement to other Dominion Collection accessories.

1. 43000124 Gloss Black. $74.95 FRONT AXLE NUT COVERS

2. 44117-07A Chrome – Die-cast. $34.95 44116-07A

5. 44148-07A H-D Motor Co. – Chrome.

6. 44114-07 Aluminator.

Also available:

Willie G Skull Fits ’02-’11 VRSC (except VRSCF and VRSCR), ’15-later XG, ’08-’22 XL (except ’16-’22 XL1200X and XL1200XS), ’08-’17 Dyna, ’07-later Softail (except Springer, FLSTNSE, FLSB, FXCW, FXCWC, FXDRS, FXFB, FXFBS, FXLRS, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-later Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS, ’18-later FLSB, FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159, ’22-later FXRST to models require separate purchase of Front Axle Adapter Kit P/N 43000159..

7. 43000096 Black. $49.95

8. 43163-08A Chrome. $49.95

Notice:

CRUISER 125

Chassis Trim – Front End

B. DOMINION™ COLLECTION FORK NUT COVERS

A perfect complement to other Dominion Collection Accessories, these Fork Nut Covers provide the finishing touch to your bike’s front end. Sold in pairs.

Fits ’06-’17 Dyna® models (except FXDB and FXDSE) and ’18-later Softail® models (except FXDRS, FXFB, FXFBS, FXLRS, FXLRST and FLSB). Also fits ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL, ’16-later FXDLS, ’94-’05 FXDS-CONV, ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN, and ’86-’17 FLSTC models. 45800117 Gloss Black. $79.95

C. DEFIANCE COLLECTION UPPER FORK STEM COVERS Sold in pairs.

Fits ’06-’17 Dyna models and ’18-later Softail models (except FXDRS, FXFB, FXFBS, FXLRS, FXLRST and FLSB). Also Fits ’88-’13 XL (except XL1200CX, XL1200X, XL883N) ’95-’05 FXD, ’93-’05 FXDL, ’16-later FXDLS, ’94-’05 FXDS-CONV and ’90-’17 FLS, FLSS, FLSTF, FLSTFB, FLSTFBS and FLSTN and ’86-’17 FLSTC models.

45500515 Gloss Black. $59.95

D. BRAKE BLEEDER AND BANJO BOLT COVERS

Brake Bleeder Screw Cover This cover adds chrome to the unfinished bleeder valve on all stock H-D® calipers. Package of two.

43834-98 $27.95 Fits ’84-later stock calipers (except XG and XR models).

E. FORK AXLE RETAINER NUT KIT – CHROME It’s the details that count. Complete the chrome transformation by adding this finishing touch to your chrome fork sliders. This Axle Retainer Nut Kit includes the stylish chrome-plated nuts and chrome lockwashers necessary to replace the stock hardware.

45813-03

$29.95

Fits ’91-’05 FXDWG, ’86-’07 FLST, FLSTC, FLSTF and FLSTN, ’91-’07 FXST and FXSTB, and ’84-’13 Touring and Trike models.

F. BRAKE CALIPER INSERTS Easy-to-install inserts add a finishing touch to the front and rear brake calipers. Select a style that follows your custom direction. Self-adhesive backing.

Fits ’00-later front and rear brake calipers on all models (except Springer™ front, ’06-later VRSC™, ’15-later XG, ’04-’22 XL, ’18-later Softail rear caliper, and ’08-later Touring and Trike).

44477-99 Classic Chrome. $20.95 44476-99 Harley-Davidson Script. $20.95

G. CONTOURED FRAME INSERTS These Contoured Frame Inserts are shaped to fill the frame recesses that surround the swingarm pivot bolt. Adhesive backed for easy installation.

48211-08 Chrome. $74.95 Fits ’08-’17 Softail models (except FXCW, FXCWC, FXSB and FXSBSE).

H. UPPER BELT GUARD – CHROME Hand-polished and chrome-plated to replace your factoryequipped painted upper belt guard.

60867-08 $118.95

Fits ’07-’17 FLS, FLSS, FLSTFB, FLSTFBS, FLSTSB, FLSTSC, FXCW, FXS, FXSB, FXSE, FXST and FXSTB models. Stock on many ’07-’17 Softail models.

126 CRUISER

Chassis Trim – Rear End

A. LOWER BELT GUARD

This handsome formed steel guard replaces the Original Equipment plastic debris deflector, providing a rich smooth surface that complements the swingarm and frame. Available in chrome or gloss black finish, this complete kit includes all required mounting hardware.

Fits ’07-’17 FLS, FLSS, FLSTC, FLSTN, FLSTNSE, FXS, FXSB, FXSBSE, FXSE and FXSTD models.

60654-07A Chrome. $109.95

57100179 Gloss Black. $108.95

Fits ’07-’17 FLSTF, FLSTFB, FLSTFBS, FLSTSB, FXST, FXSTB and FXSTC, ’14-’15 FLSTNSE, ’10-’12 FLSTSE, ’16-’17 FXSE and ’07-’08 FXSTSSE. Chrome version stock on ’14-’15 FLSTNSE, ’10-’12 FLSTSE and ’07-’08 FXSTSSE models.

60655-07A Chrome. $104.95

REAR AXLE NUT COVERS

Cover your rear axle nut in the most traditional way. These Rear Axle Cover Kits complement the matching Front Axle Nut covers. Easy to install, these cover kits include necessary mounting hardware. Sold in pairs.

B. REAR AXLE NUT COVERS

Fits ’08-’17 Dyna® and ’08-later Softail® models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).

41705-09 Chrome – Die-cast. $34.95

43422-09 Gloss Black – Billet. $54.95 Fits ’09-’11 FXCW and FXCWC, ’13-’17 FXSB and FXSBSE, and ’16-’17 FXSE models.

43000051 Chrome – Billet. $134.95 43000052 Gloss Black – Billet. $134.95

C. REAR AXLE NUT COVERS – WILLIE G SKULL

41706-09A $49.95

Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).

D. REAR AXLE NUT COVERS – H-D MOTOR CO. LOGO, CHROME

41704-09

$39.95

Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).

E. REAR AXLE NUT COVERS – H-D MOTOR CO. LOGO, GLOSS BLACK

Cover the axle in style. Drenched in gloss black and trimmed with deep cut, silver-filled Harley-Davidson Motor Co. lettering, these Axle Nut Covers are an aggressive twist on a classic style. The covers look great with Original Equipment satin-finish fork sliders or are the perfect finishing touch to complete a blacked-out front or rear end. These easy-toinstall kits include all necessary mounting hardware. Sold in pairs.

43000178

$39.95

Fits ’08-’17 Dyna and ’08-later Softail models (except FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and ’18-later FLFB, FLFBS, FLSB, FXBR, FXBRS and FXDRS).

FLTRXSTSE and ’25-later FLHXU) and Trike models.

G. BAR & SHIELD LOGO FRONT FENDER SPEAR This chrome-plated trim spear adds a sweeping dash of chrome to the front fender. Featuring a raised Bar & Shield logo set against a textured black field, this self-adhesive medallion is easy to install.

91195-04 Large. $54.95

Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later FLDE, FLHC, FLHCS, ’24-later FLI and ’84-later Touring (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike models.

H. WILLIE G SKULL FENDER SKIRT

This decorative chrome-plated fender skirt is a direct replacement for stock fender skirt. Features a three-dimensional sculptured concho with skull design set off with black accents. Mounting hardware included.

59582-02A $64.95

Fits ’06 FLST, ’86-’08 FLSTC, ’93-’96 FLSTN, ’80-’13 Touring and ’09-’13 Trike models equipped with Original Equipment fender skirt.

I. BAR & SHIELD LOGO FENDER TIP LENS KIT Chrome-plated polycarbonate construction features translucent Bar & Shield emblems. The kit includes front and rear lenses. Front

132 TOURING & TRIKE

DEFY THE WIND

At highway speed, you take the wind full-force in the chest, causing fatigue in your arms, neck and shoulders. Take the pressure off with an easy-to-install detachable windshield.

Shaped to divert air, rain and road debris around the rider, a windshield can add hours of riding comfort.

TOURING & TRIKE 133

SCRATCH-RESISTANT HARD-COATED

134 TOURING & TRIKE

Windshields — Road King®

A. WIND SPLITTER VENTED WINDSHIELD

Reduce helmet buffeting at speed. The Harley-Davidson® Detachables™ Wind Splitter Vented Windshield features an exclusive fingertip-adjustable center vent that reduces turbulence behind the windscreen. When open, the controlled airflow fills the negative pressure area behind the shield and helps to smooth the flow of air over the top of the screen and around the rider. The revised flow reduces helmet bobbing and neck fatigue so you can comfortably spend more time in the saddle. The open vent also provides cooling airflow to the rider at low speeds and in city traffic.

Engineered to provide the riding comfort of a larger windshield, this low-profile screen’s contemporary contour sets it apart from the crowd. The shape keeps the windshield below your sight line so you don’t look through bugs and road grime and the detachable design means you can ride without the shield when the mood strikes. The shield is formed of hard-coated polycarbonate for strength and scratch resistance and the dark-smoked finish reduces glare. The slim polished stainless steel brackets mount to the Original Equipment rubber isolated docking points for ease of installation and removal.

57400176

$474.95

Fits ’94-later Road King models (except FLHRS). ’17-later FLHRXS models require additional purchase of Mounting Hardware Kit P/N 58221-04. Does not fit with Mini Tach or Boom!™ Audio Cruiser Speakers Stock on ’13-’14 FLHRSE. Windshield dimensions: Overall height – 22.4" height from headlamp opening –16.1", width – 20.3".

B. ROAD KING 14" H-D DETACHABLES WIND DEFLECTOR

Maintain the same low-down mini-shield styling of the Road King Dark Smoke Wind Deflector with a little extra wind protection. This 3.0" taller oversized dark smoke screen features polished stainless steel mounting brackets to provide the same ease of installation as the stock Road King windshield.

57357-07 14" Dark Smoke. $399.95

Fits ’94-later Road King models. ’04-’07 FLHRS and ’17-later FLHRXS models require additional purchase of Mounting Hardware Kit P/N 58221-04. Stock on ’07 FLHRSE models. Windshield dimensions: Overall height – 21.0"; width – 21.4". Also available: ROAD KING 11" H-D DETACHABLES WIND DEFLECTOR Keep the wind and glare out of your eyes with this Smoked Wind Deflector. This dark smoke detachable mini-shield follows the form of a traditional Harley-Davidson Road King windshield, but its much smaller size adds a touch of lowdown attitude.

58163-02 11" Dark Smoke. $399.95

Fits ’94-later Road King models. ’04-’07 FLHRS and ’17-later FLHRXS models require additional purchase of Mounting Hardware Kit P/N 58221-04. Stock on ’08 FLHRSE models. Windshield dimensions: Overall height – 18.0"; width – 19.4".

136 TOURING & TRIKE

A. WIND SPLITTER 5" WINDSHIELD – RED

The Wind Splitter Windshield now available in red is shaped for the perfect combination of effective airflow management and wow styling. Distinctive red tint originally seen on 2026 CVO™ Street Glide® ST models. Sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. Polycarbonate material and stylish tint is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

57400725

$199.95

Fits '23-later FLHXSE, '24-later FLHX, '25 FLHXU and '26later FLHLT, FLHLTSE, FLHXL, FLHXLSE and FLHXSTSE models. FLHXU, FLHLT, FLHLTSE, FLHXL and FLHXLSE models require separate purchase of Short Windshield Mounting Kit P/N 57400687.

B. WIND SPLITTER 5" WINDSHIELD – DARK SMOKE

Dark smoked finish looks great against any paint color. Polycarbonate material and stylish tint is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

57400597

$199.95

Fits '23-later FLHXSE, '24-later FLHX, '25 FLHXU and '26later FLHLT, FLHLTSE, FLHXL, FLHXLSE and FLHXSTSE models. FLHXU, FLHLT, FLHLTSE, FLHXL and FLHXLSE models require separate purchase of Short Windshield Mounting Kit P/N 57400687.

C. WIND SPLITTER 8" WINDSHIELD

In the world of functional performance, size does matter. After all, it’s simple to understand that the larger the windshield area, the greater the amount of wind deflection. Specifically designed for riders between 5’4" and 5’9" in height. A rider in this range will experience up to 50% reduction of visor pressure over the stock windshield. Rigorous fluid dynamic analysis and wind-tunnel testing shows significant reduction in helmet pressure and air velocity. Sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. The shape decreases wind noise and improves your ability to hear the motorcycle sound system. Polycarbonate material is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

Fits '23-later FLHXSE models, '24-later FLHX, '25 FLHXU and '26-later FLHLT, FLHLTSE, FLHXL, FLHXLSE and FLHXSTSE models. FLHX, FLHXSE and FLHXSTSE models require separate purchase of Tall Windshield Mounting Kit P/N 57400668. 57400600 8" Clear. $229.95 57400601 8" Light Smoke. $229.95 57400688 8" Dark Smoke. $229.95

D. WIND SPLITTER 10" WINDSHIELD

In the world of functional performance, size does matter. After all, it’s simple to understand that the larger the windshield area, the greater the amount of wind deflection. The windshield is specifically designed for riders taller than 5’9" in height. A rider in this range will experience up to 25% reduction of visor pressure over the stock windshield. Rigorous fluid dynamic analysis and wind-tunnel testing shows significant reduction in helmet pressure and air velocity. The sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts The shape decreases wind noise and improves your ability to hear the motorcycle sound system. Polycarbonate material is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

Fits '23-later FLHXSE, '24-later FLHX, '25 FLHXU and '26-later FLHLT, FLHLTSE, FLHXL, FLHXLSE and FLHXSTSE models. FLHX, FLHXSE and '26-later FLHXSTSE models require separate purchase of Tall Windshield Mounting Kit P/N 57400668. 57400602 8" Clear. $239.95 57400603 8" Light Smoke.

FLHLT, FLHLTSE, FLHXL and FLHXLSE models.

G. WIND SPLITTER WINDSHIELD – BATWING FAIRING In the world of functional performance, size does matter. After all, it’s simple to understand that the larger the windshield area, the greater the amount of wind deflection. The Wind Splitter Windshield is a great look for all Touring models and is shaped for the perfect combination of effective airflow management and “wow” styling. The sweeping design complements the shape of the fairing and the inner dash panel and adds height over a traditional low-profile wind deflector in the center where it counts. The shape decreases wind noise and improves your ability to hear the motorcycle’s sound system. The rich smoked finish does not interfere with your forward view and looks great against any paint color.

138 TOURING & TRIKE

Windshields — Electra Glide®

A. BATWING FAIRING WINDSHIELDS

Tailor your bike to your size and riding style. For the best compromise between adequate protection from the elements and a clear view of the road ahead, select a windshield that tops out just below eye level. This reduces helmet buffeting while allowing a view unobstructed by dirt, bugs and rain drops. Harley-Davidson® windshields are formed of hardcoated polycarbonate for strength and scratch resistance and are available in a variety of heights and tints to suit your riding needs.

Fits ’14-’24 Electra Glide®, Street Glide® (except ’23-later FLHXSE and ’24-later FLHX), Ultra Limited™ and ’14-later Tri Glide® models.

57400224 15" Clear. $179.95

57400228 12" Clear.

57400226 12" Light Smoke.

57400227 10" Clear.

57400225 10" Light Smoke. $154.95

Fits ’96-’13 Electra Glide, Street Glide and Trike models.

58314-97 15" Clear. $159.95

58187-96 12" Clear. $159.95

B. BATWING FAIRING WIND DEFLECTOR –MEDIUM PROFILE

Style meets function. This 7.0" tall Wind Deflector splits the difference between the wind deflector and a low windshield, offering sport styling with a little greater wind protection. Harley-Davidson windshields are formed of hard-coated polycarbonate for strength and scratch resistance and the dark smoke tint complements any paint color.

57400229 7" Dark Smoke. $159.95

Fits ’14-’24 Electra Glide, Street Glide (except ’23-later FLHXSE and ’24-later FLHX), Ultra Limited and ’14-later Tri Glide models.

ST WINDSHIELD – BATWING FAIRING

Combine functional performance and custom style with this gold-tone Wind Splitter Windshield. This Wind Splitter windshield is a great look for all Street Glide models and is shaped for the perfect combination of effective airflow management and wow styling. Sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts Shape decreases wind noise and improves your ability to hear the motorcycles sound system. Easy-to-install and features a center-mount Bar & Shield logo for a distinctive finishing touch.

57400528 $242.95

Fits ’14-’24 Electra Glide, Street Glide, Ultra Limited and ’14later Tri Glide models (except ’23-’24 FLHXSE and ’24 FLHX). Does not fit with windshield bags or pouches.

E. WINDSHIELD TRIM – GLOSS BLACK

Complete the blacked-out look. This easy to install windshield molding accents the outer fairing on batwing fairing equipped models, and simplifies the transition between the fairing and the base of the windshield. Kit includes one-piece trim and required mounting hardware.

61400325 $69.95 Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri Glide (except ’23-later FLHXSE and ’24-later FLHX) models.

F. WINDSHIELD TRIM – CHROME Chrome Windshield Molding accents the outer fairing on Electra Glide models. Easily installed, including all necessary hardware and instructions.

61300310

$69.95

Fits ’14-later Electra Glide, Street Glide, Ultra Limited and Tri Glide (except ’23-later FLHXSE and ’24-later FLHX) models.

140 TOURING & TRIKE

Windshields — Road Glide®

A. WIND SPLITTER 4.5” WINDSHIELD – RED

The Wind Splitter Windshield now available in red is shaped for the perfect combination of effective airflow management and wow styling. Distinctive red tint originally seen on 2026 CVO™ Road Glide® ST models. Sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. Polycarbonate material and stylish tint is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch. 49-state Compliant.

57400726

$199.95

Fits '23-later FLTRXSE, '24-later FLTRX and FLTRXSTSE and '26-later FLTRT and FLTRXL models.

B. WIND SPLITTER 5" WINDSHIELD – DARK SMOKE

The Wind Splitter Windshield is shaped for the perfect combination of effective airflow management and wow styling. Sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. Dark smoked finish looks great against any paint color. Polycarbonate material and stylish tint is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

57400617

$199.95

Fits '23-later FLTRXSE, '24-later FLTRX and FLTRXSTSE and '26-later FLTRT and FLTRXL models.

C. WIND SPLITTER 10" WINDSHIELD

In the world of functional performance, size does matter. After all, it’s simple to understand that the larger the windshield area, the greater the amount of wind deflection. The Wind Splitter Windshield is shaped for the perfect combination of effective airflow management and wow styling. The windshield is specifically designed for riders between 5’4" and 5’9 in height. A rider in this range will experience up to 50% reduction of visor pressure over the stock windshield. Rigorous fluid dynamic analysis and wind-tunnel testing shows significant reduction in helmet pressure and air velocity. The sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. The shape decreases wind noise and improves your ability to hear the motorcycle sound system. Polycarbonate material is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

Fits '23-later FLTRXSE, '24-later FLTRX, FLTRXSTSE and '26-later FLTRT and FLTRXL models.

D. WIND SPLITTER 12" WINDSHIELD

In the world of functional performance, size does matter. After all, it’s simple to understand that the larger the windshield area, the greater the amount of wind deflection. The Wind Splitter Windshield is shaped for the perfect combination of effective airflow management and wow styling. The windshield is specifically designed for riders taller than 5’9" in height. A rider in this range will experience up to 25% reduction of visor pressure over the stock windshield. Rigorous fluid dynamic analysis and wind-tunnel testing shows significant reduction in helmet pressure and air velocity. The sweeping design complements the shape of the fairing and the inner dash panel, and adds height over a traditional low-profile wind deflector in the center where it counts. The Shape decreases wind noise and improves your ability to hear the motorcycle sound system. Polycarbonate material is protected by a scratch-resistant layer. Easy-to-install with new floating bracket design and features Harley-Davidson script for a distinctive finishing touch.

Fits '23-later FLTRXSE, '24-later FLTRX, FLTRXSTSE and '26-later FLTRT and FLTRXL models.

TOURING & TRIKE 141

E. WIND SPLITTER WINDSHIELD – ROAD GLIDE® MODEL In the world of functional

The rich smoked finish does not interfere with your forward view and looks great against any paint color. The easy-toinstall Wind Splitter features a center-mount Bar & Shield medallion for a distinctive finishing touch. Fits ’15-’24 Road Glide (except ’23-later FLTRXSE, ’24-later FLTRX and FLTRXSTSE) and ’23-later FLTRT models.

57400271 12" Light Smoke. $224.95

57400270 15" Light Smoke. $239.95

F ROAD GLIDE® ST 6” WIND DEFLECTOR Roll with custom style. This 6-inch Wind Deflector accentuates the curvaceous shape of the Road Glide® model’s fairing, and hugs the contours of the splitstream vent. 57400526

Fits ’15-’24 Road Glide (except ’23-later FLTRXSE, ’24-later FLTRX and FLTRXSTSE) and ’23-later FLTRT models. G. ROAD GLIDE SPLIT WINDSHIELD TRIM This easy-to-install, 2-piece trim kit adds a speed-stripe accent to the base of the windshield. Tapered from the leading to the trailing edge, the glass-smooth trim features counter bored mounting holes and flush-mount hardware for a clean, elegant look. Kit includes left and right trim and installation hardware. Fits ’15-'24 Road Glide and ’23-later FLTRT models. Does not not fit ’24-later FLTRX, FLTRXSTSE and ’25-later FLTRXSE. 57400320 Satin Black. $137.95

142 TOURING & TRIKE

Fairing – Accessories

A. THREE-POCKET BATWING FAIRING POUCH –’14-LATER MODELS

Convenient storage space at your fingertips. Designed to complement H-D® Wind Deflectors and Windshields, this fairing pouch is ideal for storing mobile devices, sunglasses and other small items. The sturdy plastic pouches are wrapped in supple UV-resistant vinyl for a premium look and feel and the magnetic closures keep your items within reach without detracting from the tastefully smooth styling.

93300054B $149.95

Fits ’14-’24 Electra Glide®, Street Glide®, Ultra Limited® and ’14-later Tri Glide® models with windshields. Not for use with Wind Splitter Windshields P/N 57400204 or 57400205. Not for use with Illuminated Windshield Trim P/N 57000394 or 57000395. Does not fit ’23 FLHXSE and ’24-later FLHX models.

B. THREE-POCKET BATWING FAIRING POUCH –’96-’13 MODELS

Convenient storage space at your fingertips. Designed to complement H-D Wind Deflectors and Windshields, this fairing pouch is ideal for storing cell phones, sunglasses and other small items. The sturdy plastic pouches are wrapped in supple UV-resistant vinyl for a premium look and feel and the magnetic closures keep your items within reach, while not detracting from the tastefully smooth styling. The lefthand pouch can be easily removed to accommodate your fairing-mounted GPS unit. Attractive Harley-Davidson script is featured on the front center pouch and on the outboard-facing side, visible through the windshield.

58900-11

$139.95

Fits ’96-’13 Electra Glide, Street Glide and Trike models. Not for use with Fairing Dash Pads. Models equipped with Illuminated Windshield Molding P/N 57335-08 requires separate purchase of Screws P/N 4456 (Qty 3), Bar & Shield Windshield Molding P/N 59133-99 requires separate purchase of Screws P/N 94386-92T (Qty 3), Chrome Windshield Trim P/N 59213-96 requires separate purchase of Screws P/N 94397-91T (Qty 3).

C. ADJUSTABLE AIR DEFLECTORS

The Adjustable Air Deflectors feature an infinitely adjustable friction pivot that holds the wing in position to direct the air where you need it. Close the vent to direct airflow around the fairing or open the vent to maximize airflow on hot days. Available in dark or light smoke finish, the translucent deflectors are easy to install with the included mounting hardware.

57000529 Dark Smoke. $129.95

Fits ’14-later Electra Glide, Street Glide and Tri Glide models (except ’24 FLHX, ’23-later FLHXSE and ’25-later FLHXU).

58156-08A Dark Smoke. $164.95 Fits ’08-’13 Electra Glide, Street Glide and Trike models.

D. FAIRING AIR DEFLECTORS

Designed to deflect air away from the rider’s elbows and upper torso, these easy-to-install Air Deflectors reduce the draft behind the fairing. Fixed-position deflectors are available in your choice of black or smoked finish to match your styling direction.

Fits ’96-’13 Electra Glide, Street Glide and Trike models. 58120-96A Light Smoke. $55.95

TOURING & TRIKE 143

– Accessories

E. ROAD GLIDE® FAIRING

144 TOURING & TRIKE

Fairing Lowers

A. FAIRING LOWER FITTED GLOVE BOX LINER

Protect your belongings and reduce noise and rattles on the road. Soft-touch felt finish liner is formed to the fairing glove box interior for a perfect fit. Molded base and sides maximize the interior room. One-piece design allows easy removal for cleaning and maintenance.

57100491 $59.95

Fits '25-later Touring and Trike models equipped with Fairing Lowers.

B. FAIRING LOWER FITTED GLOVE BOX LINER KIT

Protect your belongings and reduce noise and rattles on the road. Soft-touch felt finish liner is formed to the fairing glove box interior for a perfect fit. Molded base and sides maximize the interior room and one-piece design allows easy removal for cleaning and maintenance.

57100270

$59.95

Fits ’14-’25 Touring and Trike models (except ’23-later FLTRXSE, FLHXSE and ’24-later FLHX, FLTRX and FLTRXSTSE) equipped with Original Equipment or accessory Vented Fairing Lowers. Does not fit Twin-Cooled models.

C. FAIRING LOWER QUICK-RELEASE HARDWARE KIT

Beat the summer heat and prepare for around-town cruising by removing the fairing lowers on your Ultra Classic® Electra Glide® model. This kit includes highly polished stainless steel clamps that are detachable without the need for tools.

47200240

$139.95

Fits ’14-’25 FLHTCU and FLHTCUL models. Also fits ’14 Touring models (except ’25-later FLHXU) equipped with Accessory Fairing Lowers. Does not fit models equipped with Twin-Cooled™ engines. Does not fit models equipped with Fairing lower speakers.

D. SOFT LOWERS

Extend your riding season. Full-coverage Soft Lowers provide wind and mud protection for the rider’s legs and boots and minimize cold updrafts as the weather changes. Covers are custom shaped to hug the engine guard to minimize flapping and they simply clip in place for speedy installation as the weather changes. Two-way zippered outer edge accommodates guard-mounted highway pegs in almost any position. Reflective piping provides added visibility and convenient zippered pockets provide additional storage for maps or other small items.

57100210

TOURING & TRIKE 145

$119.95

Fits ’80-later Touring (except FLTRT, ’24-later FLHX, FLTRX, FLTRXSTSE and ’23-later FLHXSE and FLTRXSE and ’25-later FLHXU) and Trike models equipped with engine guards. Does not fit with Original Equipment or accessory Color-Matched Fairing Lowers. Does not fit Mustache or Chopped Engine Guards. Does not fit models with Extended

or

CVO.

F. MID-FRAME AIR DEFLECTOR Designed for severe duty and extreme temperature applications. These black deflectors attach to the frame below the seat and direct heat away from the rider to improve comfort. Kit includes all necessary hardware.

57200417

Fits ’24-later FLHX, FLTRX, and FLTRXSTSE.

$97.95

58002-09A $97.95

Fits ’09-’25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike models. Not compatible with ’17-later models equipped with CoolFlow Fan P/N 26800120, 26800121 and 26800128.

57200157 $97.95

Fits ’17-later Touring and Trike models equipped with CoolFlow Fan P/N 26800120, 26800121 and 26800128.

G. MID-FRAME AIR DEFLECTOR TRIM

This injection-molded trim adds a touch of chrome to the Mid-Frame Air Deflectors on touring vehicles. These chrome accents blend the look of chrome from the engine and help make the deflectors look integrated with the bike.

61400028 $64.95

Fits ’09-’25 Touring (except ’23-later FLHXSE, FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and Trike models with Original Equipment Mid-Frame Air Deflectors. Also fits models equipped with Mid-Frame Air Deflectors P/N 58002-09. Does not fit ’17-later models equipped with CoolFlow Fan Kits.

H. ROAD GLIDE® WIND DEFLECTOR KIT Easy to install, these snap-fit Wind Deflectors reduce and redirect the airflow that rises between the fairing and fork tubes. The resulting reduction in updraft can dramatically reduce buffeting for many riders.

57000510 $54.95 Fits ’15-’24 Road Glide® models (except FLTRT, ’24 FLTRX, FLTRXSTSE, ’18-’24 FLTRXSE, ’21-later FLTRXS and ’22-later FLTRXST models). Does not fit with Chopped Engine Guards P/N’s 49000105A or 49000114A. Stock on ’15-later FLTRUSE and ’20 FLTRK.

146 TOURING & TRIKE

Rider Comfort

A. COOLFLOW™ FAN

Unlike traditional fan kits that try to cool the engine by blowing air across the cylinders and often onto your legs, the CoolFlow™ Fan Kit keeps the riders comfortable by pulling air away from the rear cylinder and exhaust pipe, and directing it toward the ground.

The CoolFlow Fan features switched On/Off/Auto operation on ’17-later models and On/Off on ’09-’16 models. In the “ON” mode, the fan is active at low speeds, and will turn off when the bike reaches 40mph. As speed drops, the fan turns back on at 35 mph. This logic program prevents the fan from cycling on and off during low speed changes. On ’17-later models, the AUTO setting operates based on a combination of speed parameters and specific engine and ambient temperatures. Built to withstand the harsh motorcycle environment, the allweather CoolFlow Fan is 100% waterproof and includes everything you need for installation. The plug-and-play design is integrated with the vehicle electronics, so “On/Off/Auto” fan operation is indicated in the odometer screen. Your dealer will enable this function in the Electronic Control Module (ECM) and you’re ready to roll. Odometer fan status display feature availability varies by model and may not be available for your vehicle.

26800242 $319.95

Fits ’14-’25 Touring models. ’14-’23 Touring models require additional purchase of Installation Kit P/N 69203453. Does not fit with Starter End Cover P/N 31400088 and 31400090.

26800121

$329.95

Fits ’17-later FLHR, FLHRC, FLHRXS, FLHP and FLRT models. Does not fit with Starter End Cover P/N 31400090. FLHRC Brazil configurations and FLHP (all regions) require separate purchase of Mid-Frame Air Deflector P/N 57200151. Separate purchase of Mid-Frame Air Deflector Kit P/N 57200157 is recommended for maximum performance on all other vehicles. Dealer Digital Technician™ update is required to display fan status.

26800120

$329.95

Fits ’17-’24 FLHT, FLHXS, FLHXST, FLHXSE, FLTRX, FLTRXS and FLTRXST models. models. Does not fit with Starter End Cover P/N 31400090. FLHXS and FLHXSE Brazil configurations require separate purchase of Mid-Frame Air Deflector P/N 57200151. Separate purchase of Mid-Frame Air Deflector Kit P/N 57200157 is recommended for maximum performance on all other vehicles. Dealer Digital Technician™ update is required to display fan status.

26800128

$329.95

Fits ’17-’24 FLHTCU, FLHTCUTG, FLHTCUTGSE, FLHTK, FLHTKL, FLHTKSE, FLHTP, FLTRK and ’17-’19 FLTRU models. Does not fit with Starter End Cover P/N 31400090. FLHTCUTG (HDI, ENG, HDJ configurations only), FLHTP models require separate purchase of Switch Pack P/N 69200173 and Switch Buttons (2) P/N 71400031. Includes replacement right side Mid-Frame Air Deflector. Dealer Digital Technician update is required.

26800152 $329.95

Fits ’09-’16 Touring and Trike models with or without Original Equipment Mid-Frame Air Deflectors. Separate purchase of Mid-Frame Air Deflector Kit P/N 58002-09A is recommended for maximum performance if not equipped. ’15-’16 FLRT models require separate purchase of Switch Pack P/N 71522-08.

Also available:

COOLFLOW FAN INSTALLATION KIT

Complete kit required for installation of CoolFlow™ Fan P/N 26800242 on certain models.

69203453 $19.95

Fits ’14-’23 Touring models (except ’23 FLHXSE and FLTRXSE). Required for installation of CoolFlow Fan P/N 26800242.

Also available: PORT SPLITTER HARNESS

Required for installation of CoolFlow™ Fan P/N 26800242 on certain models when multiple electrical accessories are installed.

69203486 $34.95

Fits ’14-’23 Touring models (except ’23 FLHXSE and FLTRXSE). Required for installation of CoolFlow Fan P/N 26800242.

Davidson® Fan Assisted Oil Cooler utilizes weather-rated fans and electronics that are designed for the harsh motorcycle environment. Engineered as a bolt-on replacement for the Original Equipment oil cooler, the Fan Assisted Oil Cooler is plug-and-play compatible with your bike’s wiring harness. No splicing or rewiring is required. ECM reprogramming by a Harley-Davidson® Dealer is required to complete the installation.

62700204 $369.95 Fits ’17-’25 Touring models equipped with air/oil-cooled Milwaukee-Eight® engines. Does not fit models equipped with Twin-Cooled™ engines. Not compatible with Oil Cooler Cover P/N 25700633 or 25700634. Original Equipment on oil-cooled Police and Freewheeler® models. Does not fit center cooled models.

C. MILWAUKEE-EIGHT® ENGINE OIL COOLER FAN Traffic jam? This Oil Cooler Fan can help keep MilwaukeeEight Engine oil temperature under control if you find yourself idling or moving slowly in traffic, especially in hot weather. Fan automatically engages to lower oil temperature up to 50 degrees compared to an oil cooler without a fan. Weatherproof for durability. Perfect addition to a bike equipped with high performance components. Ideal for bikes that see parade duty and other low speed or continuous idle situations. Fan automatically engages when the engine oil temperature rises. When in operation the Oil Cooler Fan can provide up to a 50 degree drop in oil temperature compared to an oil cooler without a fan. The Harley-Davidson® Oil Cooler Fan utilizes weather-rated fans and electronics that are designed for reliable service in the harsh motorcycle environment. Engineered for bolt-on installation and plug-and-play compatibility with your bike’s wiring harness without unhooking messy oil lines. ECM reprogramming by a Harley-Davidson Dealer is required to complete the installation. No splicing or rewiring is required 26800195 $275.95 Fits ’17-’25 Touring models equipped with air/oil-cooled Milwaukee-Eight engines. Does not fit models equipped with Twin-Cooled engines, or Trike and Police models equipped with fan assisted oil coolers. Not compatible with Oil Cooler Cover P/N 25700633 or 25700634.

COMFORT IS KING

The ability to spend hours behind the handlebars and rack up hundreds of miles without stopping is dictated by how you feel on your bike. The shape of the seat, the reach to the handlebars and the location of your feet are all major factors in how far you can travel in a day. But don’t forget your passenger’s needs — he or she has a stake in this ride as well.

THE RIDER & PASSENGER ENVIRONMENT

Accessories that impact the rider and passenger’s physical contact with the motorcycle and the management of wind, temperature and road conditions should be your first consideration in building the ultimate touring machine.

ENJOY THE RIDE

The relationship between the seat, the handlebar and the foot controls has an enormous impact on the comfort, control and confidence you feel when riding your motorcycle. Once you’ve picked the bike, it’s

Repositioning

FOOT CONTROLS

HANDLEBARS

Where

SUSPENSION

150 TOURING & TRIKE

A. REACH® SEAT

Designed to position riders with a shorter inseam closer to the ground, Reach® Seats are shaped to place the rider in a comfortable and confident relationship to the hand and foot controls. The wide seating surface provides loads of support while riding and the narrow tapered nose brings your legs together for an easier reach to the ground at a stop. Features a stepped profile that provides back support and keeps the rider from sliding back during acceleration. The seat moves the rider 1” closer to the handlebars. Enhanced back support padding moves the rider 0.8” lower and 1.5” forward without locking the rider into a cramped position. Features a multipanel design for added custom style. Heat-staked graphic design in seat center also adds custom style. This seat can be equipped with an optional rider backrest for additional touring comfort. Seat width: 13". Passenger pillion width: 9". Measurements based on Original Equipment seat.

52000638

$432.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Models sold with solo seats will require separate purchase of additional hardware.

B. TALLBOY® SEAT

Designed specifically to enhance arm and leg room for the long-limbed rider, this two-up seat moves the rider up one inch. The seat is sculpted to provide superior support and comfort, with a slight bucket shape to provide room to vary your riding position fore and aft. The seat’s level seating surface does not pitch the rider forward, and the overall ride height is similar to stock Electra Glide® and Road Glide® Ultra seating. This seat moves the rider up one inch to provide much-needed arm and leg room for the long-limbed rider. Features a multi-panel design for added custom style. Heat-staked graphic design in seat center also adds custom style. Tallboy® seats can be equipped with an optional rider backrest (except Adjustable style) for additional touring comfort. Measurements are based on Original Equipment seat. Seat width: 16.5". Passenger pillion width: 15.0".

52000640

$419.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Models sold with solo seats will require separate purchase of additional hardware.

C. SUNDOWNER™ SEAT – TOURING

The Sundowner™ Seat provides the maximum in long-riding comfort. The deep-bucket design puts your body in the proper touring position, and the generous padding makes it comfortable for both the rider and passenger as the miles are adding up. The dished shape provides added rider back support and the wide passenger pillion is shaped to minimize pressure points. The smooth cover complements any Touring model. The seat accepts Rider Backrest Kits (sold separately) for additional touring comfort. The seam is sealed in critical areas to minimize water return. With a rider seat width of 15.75".

52000672

$424.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Models sold with solo seats will require separate purchase of additional hardware.

D. SWITCHBACK TOURING SEAT – U STITCH

Take your custom style up a notch. This one-piece two-up seat features premium smooth black vinyl with a stitched-in pattern in a bold U pattern on the rider and passenger

logo. Fastback profile.

52000757 $499.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Does not fit with rider backrests. Vehicles sold with solo seats will require separate purchase of additional hardware.

E. SWITCHBACK TOURING SEAT – RED STITCH Take your custom style up a notch. This one-piece, two-up seat features contrasting vinyl patterns, performance red stitching and a modern interpretation of the classic tuck-and-roll upholstery pattern. One-piece, two-up design incorporates rider seat and pillion. Features debossed tuck-and-roll pattern on seating surface. Smooth black vinyl seating surface with textured vinyl side panels and contrasting performance red stitching. Features performance red rubber Bar & Shield logo. Fastback profile.

52000756 $499.95 Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. models. Does not fit with rider backrests. Vehicles sold with solo seats will require separate purchase of additional hardware.

F. SWITCHBACK TOURING SEAT Add some style and attitude with no comfort compromise. This one-piece, two-up seat offers a high-performance profile with a focus on design details. The one-piece, two-up design incorporates rider seat and pillion. Features dimpled vinyl and raised pillow detail in center of rider position for a custom look. With contrasting stitching. The deep shape supports the aggressive rider. The clean style complements any custom direction.

52000643 $399.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Does not fit with rider backrests. Vehicles sold with solo seats will require separate purchase of additional hardware.

52000654 $439.95 Fits ’14-later Touring (except ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE and ’25-later FLHXU models). Does not fit with rider backrests. Does not fit with rider backrests.

152 TOURING & TRIKE

A. SPORT SOLO TOURING SEAT – CONTRAST STRIPE

Performance meets comfort. This solo seat is shaped to hold the rider in a comfortable yet secure position during aggressive riding, with go-fast styling to match your attitude. Black with Performance Red contrast stitching. Features a stitched racing stripe running down the center of the seat cushion and a raised Performance Red rubber Bar and Shield logo. A raised rear bolster helps hold the rider in position. The seat shape and padding materials are designed for long-range comfort for most riders. The seat is shaped to rotate the rider’s hips to a neutral position relative to the spine to position the rider in a comfortable posture. Pair with matching Sport Passenger Pillion P/N 52400378 for two-up riding.

52000751 $399.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Does not fit with rider backrests.

B. SPORT PASSENGER PILLION – CVO™ MODEL STYLE

Bring a passenger along for the ride. Dressed in long-lasting vinyl, this Passenger Pillion is the perfect complement to the Sport Solo Touring Seat - Contrast Stripe. Black vinyl with contrasting Performance Red stitching. Multi-panel design matches style of the Sport Solo Touring Seat P/N 52000751. Includes matching grab strap. Easy on-and-off installation lets you change from a two-up tourer to solo seat high-performance style in seconds. Styled to replace seat cowl for two-up riding on CVO™ Road Glide® ST model.

52400378

$224.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models equipped with Sport Solo Touring Seat P/N 52000751 or 52000750 and FLTRXSTSE with Original Equipment Solo Seat. Does not fit with rider backrests.

C. SPORT SOLO TOURING SEAT – SMOOTH

Performance meets comfort. This solo seat is shaped to hold the rider in a comfortable yet secure position during aggressive riding, with go-fast styling to match your attitude. A raised rear bolster helps hold the rider in position. The seat shape and padding materials are designed for long-range comfort for most riders. The seat is shaped to rotate the rider’s hips to a neutral position relative to the spine to position the rider in a comfortable posture. Pair with matching Sport Passenger Pillion P/N 52400343 for two-up riding.

52000750

$349.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Does not fit with rider backrests.

D. SPORT PASSENGER PILLION – SMOOTH

Bring a passenger along for the ride. Dressed in long-lasting vinyl, this Passenger Pillion is the perfect complement to the Sport Solo Touring Seat. The black vinyl multi-panel design matches style of the Sport Solo Touring Seat P/N 52000750. Includes matching grab strap. Easy on-and-off installation lets you change from a two-up tourer to solo seat high-performance style in seconds.

52400343

$199.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, '26 FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models equipped with Sport Solo Touring Seat P/N 52000751 or 52000750 and FLTRXSTSE with Original Equipment Solo Seat. Does not fit with rider backrests.

on-and-off installation lets you change from a two-up tourer to a stripped-down cruiser in seconds. Includes matching grab strap.

52400329 $213.95 Fits '23-later FLHXSE and FLTRXSE and '24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, and '26-later FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models equipped with the Low Profile Touring Solo Seat 52000690 or 52000691. Does not fit with rider backrests

G. LOW-PROFILE SOLO TOURING SEAT – ORANGE STITCH

Set your custom bagger apart with a Low-Profile Solo Seat that combines street-rod style with a surprising touch of comfort. Start with a shape that distributes your weight across a wide surface area to reduce pressure points. The result is the slammed custom seat that you crave with enough comfort and support to let you actually spend time in the saddle. Black Smooth Vinyl with contrasting Orange stitched details complement many paint colors. Features a multi-panel design for added custom style. The seam-sealed construction prevents rain or wash water from infiltrating the seat foam --no riding for hours on a squishy seat. Add a matching passenger pillion (sold separately). Seat width 16.7".

52000691 $374.95

Fits '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE, '25FLHXU, and '26-later FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. Does not fit with rider backrests.

H. LOW-PROFILE

colors. Features a multi-panel design for added custom style. The seam-sealed construction prevents rain or wash water from infiltrating the seat foam --no riding for hours on a squishy seat. Easy on-and-off installation lets you change from a two-up tourer to a stripped-down cruiser in seconds. Includes matching grab strap.

52400330 $292.95

Fits '23-later FLHXSE and FLTRXSE and '24-later FLHX, FLTRX, FLTRXSTSE, '25 FLHXU, and '26-later FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models equipped with the Low Profile Touring Solo Seat 52000690 or 52000691. Does not fit with rider backrests

154 TOURING & TRIKE

Seating – Heated

A. SUNDOWNER™ HEATED SEAT – TOURING

Stretch out your riding season with the comfort of this heated touring seat. The Sundowner™ Seat provides the maximum in long-riding comfort. The deep-bucket design puts your body in the proper touring position, and the generous padding makes it comfortable for both the rider and passenger as the miles are adding up. Dual-zone heated rider and passenger seating areas can be independently controlled. Dual Zone Control: Rider and passenger seating can adjust the heat level to individual preference or switch the function off. Redesigned heating element reaches selected temperature in only seven minutes. Seam-sealed construction prevents rain or wash water from infiltrating the seat foam in critical areas. Dished shape provides added rider back support. Wide passenger pillion is shaped to minimize pressure points. Smooth cover complements any Touring model. Contrasting bronze stitching. Accepts Rider Backrest Kits (sold separately) for additional touring comfort. Rider Seat width 15.75".

52000668

$749.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU models. Models equipped with additional electrical accessories require the separate purchase of 12 Way to 4 Way Electrical Harness P/N 69203476. Models equipped with solo seats require separate purchase of passenger footpegs and mounts.

Also available: 12 WAY TO 4 WAY ELECTRICAL HARNESS – HEATED SEAT

Harness required for installation of additional electrical accessories with a Heated seat.

69203476

$49.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25 FLHXU models equipped with Heated Seats and additional electrical accessories such as audio accessories.

TOURING & TRIKE 155

156 TOURING & TRIKE

Seating – Reach®

REACH® SEATS

Designed to position riders with a shorter inseam closer to the ground, Reach® Seats are shaped to place the rider in a comfortable and confident relationship to the hand and foot controls. The wide seating surface provides loads of support while riding and the narrow tapered nose brings your legs together for an easier reach to the ground at a stop. Reach Seats feature a stepped profile that provides back support and keeps the rider from sliding back during acceleration.

A. SUPER REACH SEAT

Get a little bit closer. Super Reach forward position seats are designed to move riders with a shorter inseam even closer to the controls and to bring the legs about 1.0" closer together so that your feet rest firmly on the pavement. The scooped bucket-shape saddle is enhanced with added back support padding to move the rider lower and forward.* The combination positions the rider closer to the hand and foot controls to offer both comfort and confidence. Seat can be equipped with optional rider backrest for added support and comfort.

*Measurements based on Original Equipment

Electra Glide® seat:

’09 models – 2.0" lower, 2.5" forward

’10-’13 models – 1.5" lower, 2.5" forward ’14-later models – .5" lower, 2.0" forward

54382-11

$449.95

Fits ’09-’13 Touring and Trike models. Also fits ’14-’25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE) not equipped with Tour-Pak® luggage. Installation on ’12-’25 CVO™ models requires removal of fender trim strips. Seat width 13.0"; passenger pillion width 12.0".

B. REACH SOLO SEAT

From the custom metal Bar & Shield medallion to the sleek fast-back design, this seat is shaped to deliver the ergonomic position that a shorter rider needs. Sculpted and molded to ease the reach to the ground, this Reach Solo seat places the rider 3/8" lower and 1-1/4" forward when compared to the stock FLHX seat*. The narrow nose and the low overall height provides the rider with added confidence and control while the bike is at a stop or during parking maneuvers, while the generous seating width adds support for the long haul. And the seat’s upturned tail moves you closer to the controls without confining you to one position. For maximum comfort and support, this seat is recommended for smaller-framed riders between 5’-2" and 5’-8" tall.

*Measurement as compared to other seating options:

– Original Equipment 2016 Electra Glide model seat –1.25" lower, 0.8" forward

– Original Equipment 2016 Street Glide® model seat –0.375" lower, 1.25" forward

– Original Equipment 2016 Electra Glide Low model seat –.500" lower, .500" rearward

52000253

$374.95

Fits ’09-’25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU). Does not fit Trike models. Does not fit models equipped with Passenger Grab Rails. Does not accept rider backrest or passenger pillion. Seat width 15.0".

C. REACH TWO-UP SEAT – ’14-’25 MODELS

Original Equipment on the Ultra Classic® Low and Ultra Limited® Low models, this Reach seat brings the legs about 1.0" closer together and features enhanced back support padding that moves the rider .8" lower and 1.5" forward without locking the rider into a cramped position.* The Reach seat can be equipped with an optional rider backrest for additional touring comfort.

*Measurements based on Original Equipment Electra Glide seat.

52000334

$449.95

Fits ’14-’25 Touring (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and Trike models. Seat width 15.5"; passenger pillion width 16.0".

TOURING & TRIKE 157

TALLBOY® SEATS

The correct riding position can help a tall rider sit comfortably on the bike and avoid leg

*Measurements

is

to stock and the slight bucket shape offers additional lower back support. Passenger comfort will be maximized with the Tour-Pak Luggage mounted in the rearmost position. Accepts rider backrest (except Adjustable Style) for additional touring comfort.

*Measurements based on Original Equipment Electra Glide seat: ’08-’13 models – stock height, 2.0" rearward ’14-later models – stock height, 1.5" rearward

52099-09A

$449.95

Fits ’08-’13 Touring and Trike models. Also fits ’14-’25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25later FLHXU) not equipped with Tour-Pak. Does not fit models equipped with Adjustable Rider Backrest Kits or Passenger Grab Rails. Installation on ’12-’25 CVO™ models requires removal of fender trim strips. Seat width 16.0"; passenger pillion width 14.0".

158 TOURING & TRIKE

ROAD ZEPPELIN® AIR ADJUSTABLE SEATS

The open road. That’s where we developed and tested the revolutionary comfort of the Road Zeppelin® Seat. This remarkable seat removes pressure points and hot spots by adjusting the amount of air contained in each bladder within the seat. Easyto-reach rocker switches on the side of the seat control the built-in compressor, adding and bleeding off air with the quick push of a button to help relieve stress from the lower back,

bone or lower extremities. On a long run, occasionally inflating and deflating the air bladders reduces the “numb

effect by improving the blood flow to the extremities. So grab a seat. And enjoy the ride.

A. ROAD ZEPPELIN AIR ADJUSTABLE SEAT

The Road Zeppelin seat’s ergonomically friendly design combines a narrow front nose for ease of touching the ground at a stop with a wide seating surface for long-range rider and passenger comfort. The easy-to-clean vinyl seat is finished with an embroidered Road Zeppelin logo that lets everyone see that you take riding comfort seriously. The slotted seat accepts an optional rider backrest or passenger grab rail for additional touring comfort.

52000201

$796.95

Fits ’08-’25 Touring (except ’23-later FLHFB, FLHXSE, FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and ’09-’25 Tri Glide® models. ’14-’16 models require separate purchase of Electrical Harness Extension P/N 69200722. ’17-later models require Electrical Harness Extension P/N 69201599A. Installation on some ’12’13 CVO™ models requires removal of fender trim strips. Seat width 20.0"; passenger pillion width 14.5".

Passenger Zone

Press the 3rd button to inflate and deflate the passenger area, providing maximum comfort to the backbone and support to the thigh area.

TOURING & TRIKE 159

Protect the backside of both rider and passenger from harsh road conditions. With its revolutionary suspension systems, this Harley® Hammock Rider and Passenger Touring Seat offers increased isolation from sharp road impacts. For the rider, sling-like fabric suspension system acts like a hammock to reduce impacts and the 2" of traditional foam on top provides additional support. For the passenger, a multiple spring-board style suspension system along with 2" of

Lower Back Zones

Press the 2nd button (rider only) to adjust the support in the lower back zone chambers, relieving pressure points in the lower back.

Thigh Zones

Press the 1st button to adjust pressure in the two thigh zone chambers, improving blood flow to lower extremities and adding support to thighs.

B. HARLEY® HAMMOCK TOURING SEATS

Stay in the saddle all day. These Harley® Hammock Seats

feature broad seating surfaces and a shallow bucket shape to distribute the weight and reduce pressure points. Beneath the 2" of traditional dual-density foam, the rider’s weight is supported by a revolutionary fabric suspension system. The sling-like suspension system is integrated into the seat and acts like a hammock, providing 2" of suspension above the seat pan. This internal system prevents bottoming out and provides a 30% improvement in comfort and endurance over the long haul by sheltering the rider from pothole and highway expansion joint impacts. The generous seat length permits freedom of movement on long rides, making this seat a perfect option for taller riders.

160 TOURING & TRIKE

Seating – Sundowner™

SUNDOWNER™ SEATS

The Sundowner Seat provides the maximum in long-riding comfort. The deep-bucket design puts your body in the proper touring position and the generous padding makes it comfortable for both the rider and passenger as the miles are adding up. The dished shape provides added rider back support and the wide passenger pillion is shaped to minimize pressure points.

A. SUNDOWNER SEAT – SMOOTH

The smooth cover complements any Touring model. Seat accepts rider backrest for additional touring comfort.

52000128

$424.95

Fits ’14-’25 Touring (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and Tri Glide® models. Seat width 14.5"; passenger pillion width 13.0".

52093-08A

$424.95

Fits ’08-’13 Touring and Trike models. Also fits ’14-’25 Touring models not equipped with Tour-Pak® luggage. Installation on ’12-later CVO™ models requires removal of fender trim strips. Seat width 16.0"; passenger pillion width 14.0".

51726-05

$424.95

Fits ’97-’07 Road King® and FLHX models. Also fits ’97-’07 Electra Glide® and Road Glide® models equipped with Fuel Tank Console P/N 71288-03A or Trim Piece P/N 52447-96. Seat width 15.0"; passenger pillion width 12.0".

51542-01B

$424.95

Fits ’97-’07 Electra Glide (except FLHX) and Road Glide models. Seat width 16.0"; passenger pillion width 13.5".

B. SUNDOWNER SEAT – FREEWHEELER®

This Sundowner seat is finished in rich black vinyl and is styled to complement the Freewheeler® Trike model’s Original Equipment seat.

52000183 $424.95

Fits '15-'25 FLRT and FLTRT models. Seat width 15.0"; passenger pillion width 11.0".

C. SUNDOWNER SEAT – ROAD KING® CLASSIC BASKETWEAVE

TOURING & TRIKE 161

firmly planted in the bike under hard acceleration and maneuvering. The raised pillion of the Drag Seat provides increased support when you need it most. Structural ridges of foam provide increased grip without compromising comfort. The exposed lightweight aluminum seat pan provides a rigid foundation for the seat and offers better rider feedback

tapered passenger pillion visually stretch the bike and enhance the slammed look. The seat shape stays low along its entire length and follows the lines of the bike with minimal disruption, and delivers a riding position that is lower and generally farther back than the stock seat. Ideal for both short riders needing to be closer to

Decorated with a pleated leather valance and chrome Road King Classic concho, the seat stays true to Road King Classic styling. Accepts rider backrest for additional touring comfort. 51615-99C

$449.95

Fits ’97-’07 Road King and FLHX models. Also fits ’97-’07

Electra Glide and Road Glide models equipped with Fuel Tank Console P/N 71288-03A or Trim Piece P/N 52447-96. Seat width 15.0"; passenger pillion width 12.0".

D. SUNDOWNER SEAT – ’06-’10 STREET GLIDE® STITCHING

Decorated with tuck and roll pleating, the Sundowner™ Seat complements the ’06-’10 Street Glide® styling. Accepts rider backrest for additional touring comfort.

51630-09A $449.95

Fits ’08-’13 Touring (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE) and Trike models. Also fits ’14-’25 Touring models not equipped with Tour-Pak luggage.Installation on ’12-later CVO models requires removal of fender trim strips. Seat width 16.0"; passenger pillion width 14.0".

framehugging profile add up to a statement only Harley could create. The low design delivers a reduced seat height that is ideal for riders that want the shortest possible reach to the ground, and the long and lean shape allows tall riders to move back from the hand and foot controls without sitting higher on the bike.

162 TOURING & TRIKE

LOW-PROFILE SOLO TOURING SEATS AND PILLIONS

Set your custom bagger apart with a Low-Profile Solo Seat that combines street-rod style with a surprising touch of comfort. Start with a shape that distributes your weight across a wide surface area to reduce pressure points. Then, add a tapered nose that brings the legs closer together to shorten the reach to the ground. The result is the slammed custom seat that you crave, with enough comfort and support to let you actually spend time in the saddle. Finish the look with your choice of matching passenger pillion, sissy bar pad and Tour-Pak® carrier backrest pad.

A. LOW-PROFILE SOLO TOURING SEAT – SMOOTH VINYL

Wrapped in supple black vinyl, this Low-Profile Solo Seat is shaped to hug the frame and place the rider “in” the bike –not on top of it. The slight bucket shape cradles the rider, and keeps him or her from sliding rearward during acceleration.

52000249

$349.95

Fits ’09-'25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU). Does not fit Trike models. Does not accept Rider Backrest. Seat width 15.0".

Shown with:

LOW-PROFILE PASSENGER PILLION – SMOOTH VINYL

Enveloped in smooth black vinyl, this Passenger Pillion is the perfect complement to the Smooth Vinyl Low-Profile Solo Seat. Easy on-and-off installation lets you change from a two-up tourer to a stripped-down cruiser in seconds. Includes matching grab strap.

52400141

$224.95

Fits ’09-'25 Touring models equipped with Solo Seat P/N

52000248. Does not fit Trike models. Pillion width 11.0". Does not fit ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU models.

B. LOW-PROFILE SOLO TOURING SEAT –BLACK DIAMOND

Swathed in textured black vinyl, this Low-Profile Solo Seat features a custom diamond-pleated seating surface highlighted with double-row toast-colored accent stitching. The rich materials add an elegant finish to your custom bagger.

52000248 $399.95

Fits ’09-'25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU). Does not fit Trike models. Does not accept Rider Backrest. Seat width 15.0".

Shown with: LOW-PROFILE PASSENGER PILLION –BLACK DIAMOND

Layered in a combination of smooth and textured black vinyl, this Passenger Pillion is the perfect complement to the Black Diamond Low-Profile Solo Seat. Easy on-and-off installation lets you change from a two-up tourer to a stripped-down cruiser in seconds. Includes matching grab strap.

52400140

$292.95

Fits ’09-'25 Touring models equipped with Solo Seat P/N 52000248. Does not fit Trike models. Pillion width 11.0". Does not fit ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU models.

C. LOW-PROFILE SOLO TOURING SEAT –MAHOGANY BROWN

Finished with a rich textured mahogany-brown vinyl and upholstered in a custom diamond-pleat pattern with complementing double-row gold stitching, this Low-Profile Solo Seat brings a non-traditional look to your Touring model.

52000057 $399.95

Fits ’09-'25 Touring models (except ’21-later FLH, ’23-later FLHFB, FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU). Does not fit Trike models. Does not accept Rider Backrest. Seat width 15.0".

Shown with:

LOW-PROFILE PASSENGER PILLION –MAHOGANY BROWN

Dressed in rich textured brown vinyl and finished with elegant gold stitching, this Passenger Pillion is the perfect complement to the Mahogany Brown Solo Seat. Easy on-and-off installation lets you change from a two-up tourer to a strippeddown cruiser in seconds. Includes matching grab strap.

52400040 $292.95 Fits ’09-'25Touring models equipped with Solo Seat P/N 52000248. Does not fit Trike models. Pillion width 11.0". Does not fit ’23-later FLHFB,

TOURING & TRIKE 163

Seating – Accessories

D.

164 TOURING & TRIKE

Seating – Rider Backrests

A. ADJUSTABLE RIDER BACKRESTS

Add support for the long haul. With one quick pull from the integrated gas spring, you can instantly adjust the riding position through a 30-degree range. The backrest pad features a sleek shape that provides full lower back support without pushing the rider forward and a slim profile that offers the passenger a few more inches of space. The backrest features a pull knob-activated, five-position, 1.5" height adjustment. The backrest can be easily removed and folds down to allow easier passenger mounting.

Fits ’97-later Touring and Trike models equipped with many one-piece slotted seats. This rider backrest may not look appropriate on select Original Equipment, CVO™ seats and accessory seats that are styled with a low-profile look. Installation requires separate purchase of model-specific Adjustable Rider Backrest Mounting Kit. 1.

TOURING & TRIKE 165

Shown with:

RIDER

MOUNTING KIT Kit includes mounting bracket, adjustment handle and all required installation hardware.

52596-09A $235.95

Required to install Adjustable Rider Backrest on ’09-later Touring (except ’21-later FLH, ’23-later FLHFB, ’24 FLHXSE, FLTRXSE and FLTRXSTSE) models. Does not fit Trike models.

54099-10

Required to install Adjustable Rider Backrest on ’09-later Tri Glide® models. Also fits ’15-later Freewheeler® models equipped with Sundowner™ Seat P/N 52000183. 52593-09A

$235.95

Required to install Adjustable Rider Backrest on ’97-’08 Touring models.

166 TOURING & TRIKE

Backrests & Racks

A. QUICK-RELEASE SISSY BAR UPRIGHT –FREEWHEELER® MODELS

Add passenger comfort and support to your Freewheeler® Trike model. Designed to blend with the curved lines of the trunk lid, the one piece upright slips into the docking ports and can be removed in seconds with a simple push of the release buttons. When the sissy bar is removed, you can pop in the included decorative caps for a clean custom look. The standard height upright accepts most mid-sized or oversized touring model passenger backrest pads (sold separately) and is the perfect finishing element for your long-distance touring machine. Available in your choice of mirror chrome or gloss black finish.

The low-profile aerodynamic styling of the Air Wing Luggage Rack draws your eye with its sleek lines and the engraved Harley-Davidson script adds a signature touch. This full-sized rack protects the trunk lid from scratches. The die-cast wing and lightweight steel tubing are hand-polished before finishing for long-lasting beauty. Kit includes all necessary mounting hardware.

Fits '15-later FLRT and '23-later FLTRT models.

50300097 Chrome. $239.95

C.

Required to install detachable accessories on 25-later FLTRXSTSE models. 54000337 $49.95

Required for installation of detachable accessories on '25later FLTRXSTSE and '26-later FLHXSTSE models. Does not fit with Grand Tour Pak® on '25 FLTRXSTSE.

54000383A $99.95

Fits '24 FLTRXSTSE models. Required for installation of detachable accessories on '24 FLTRXSTSE models. Does not fit with Grand Tour Pak.

168 TOURING & TRIKE

A. H-D® DETACHABLES™ SISSY BAR UPRIGHT

A sissy bar and passenger backrest pad is the starting point for building a complete touring machine. The backrest provides long-range comfort and support and adds a feeling of confidence and control for the passenger. Available in your choice of height, these H-D Detachables One-Piece Uprights can be installed or removed in seconds to add versatility to your ride. A wide variety of Backrest Pads are available for separate purchase.

Fits ’09-later Touring models equipped with required Docking Hardware Kits. ’09-later Touring models equipped with rigidmount Tour-Pak® luggage require purchase of appropriate H-D Detachables Tour-Pak Conversion Kit. '24 FLTRXSTSE requires separate purchase of P/N 54000383A hardware kit. '25-later FLTRXSTSE and '26-later FLHXSTSE require separate purchase of P/N 54000337 hardware kit.

52610-09A Short – Chrome. $219.95

Fits ’97-’08 Road King®, FLHT, FLHX and FLTR models equipped with required Docking Kits. Fits ’06-’08 FLHTC models equipped with H-D Detachables Tour-Pak Rack Mounting Kit P/N 53303-07A and Docking Hardware Kit P/N 53803-06.

TOURING & TRIKE 169

170 TOURING & TRIKE

Backrests & Racks

A. PASSENGER BACKREST PAD – COMPACT

Sized to complement low-profile custom seats, this Compact Passenger Backrest Pad combines practical passenger support with custom compact style. Pads include mounting bracket and hardware required for attachment to sissy bar upright.

Fits ’18-later Softail® models equipped with Short or Standard Height HoldFast™ Sissy Bar Uprights. Also fits Touring models equipped with Short H-D® Detachables™ Passenger Sissy Bar Upright P/N 52935-04A, 52610-09A or 54248-09A. Will not fit seats with tall passenger pillion pads. Pad height 3.75"; width 6.5".

52300559A Smooth Black Vinyl. $89.95

52300558A Fat Bob Styling. $89.95

52300556A Fat Boy® Styling. $89.95

B. PASSENGER BACKREST PAD – MID-SIZED

Sized to fit both Low and Standard-Height HoldFast Sissy Bar Uprights, these Mid-Sized Backrest Pads feature a gentle curved shape that cradles the spine and provides hours of passenger comfort. Pad height 7.0"; width 6.5".

Fits ’18-later Softail models equipped with Standard Height HoldFast Sissy Bar Uprights. Also fits Touring models equipped with Standard-Height H-D Detachables Passenger Sissy Bar Uprights P/N 52300324, 52627-09A, 54247-09A, 52933-97C or 52805-97B, Tall H-D Detachables Passenger Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Sissy Bar Upright 52300257 or 52300258. 52300733 ’24 Contrast Stitch.

Low Rider Styling.

TOURING & TRIKE 171

& Racks C. SHORT PASSENGER BACKREST PAD – SMOOTH LOOK Smooth top-stitched pad complements most seating surfaces. 51579-05A $118.95 Fits Short H-D® Detachables™ Passenger Sissy Bar Upright P/N 52935-04A, 52610-09A or 54248-09A. Also fits ’18-later Softail models equipped with Short or Standard Height Holdfast Sissy Bar Uprights. Does not fit '21-later FLH, '23later FLHFB, '24-later FLTRXSTSE, '25-later FLHXU, FLTRXRRSE and '26-later FLHXL, FLHXLSE and FLTRXL models or seats with tall passenger pillion pads. Pad height 6.5" width 10.5".

D. SHORT PASSENGER BACKREST PAD – ’24 CVO STYLE The slim profile allows additional passenger room, and the low overall height continues the long and lean profile of your custom Touring bike. Features luxurious Alcantara side panels. Pad height 6.75" (approximate), width 10.875". 52300740 $154.95 Fits Short H-D Detachables Passenger Sissy Bar Upright P/N 52935-04A, 52610-09A or 54248-09A. Also fits ’18-later Softail models equipped with Short or Standard Height Holdfast Sissy Bar Uprights. Does not fit '21-later FLH, '23later FLHFB, '24-later FLTRXSTSE, '25-later FLHXU, FLTRXRRSE and '26-later FLHXL, FLHXLSE and FLTRXL models or seats with tall passenger pillion pads. Pad height 6.5" width 10.5".

E. SHORT PASSENGER BACKREST PAD – CVO™ STREET GLIDE® CUSTOM STYLING Matches ’15 CVO Street Glide Original Equipment seat. 52300361 $154.95

Fits Short H-D Detachables Passenger Sissy Bar Upright P/N 52935-04A, 52610-09A or 54248-09A. Also fits ’18-later Softail models equipped with Short or Standard Height Holdfast Sissy Bar Uprights. Does not fit '21-later FLH, '23later FLHFB, '24-later FLTRXSTSE, '25-later FLHXU, FLTRXRRSE and '26-later FLHXL, FLHXLSE and FLTRXL models or seats with tall passenger pillion pads. Pad height 6.5" width 10.5".

F. STYLED BACKREST PAD MOUNT This custom Backrest Mounting Plate replaces the stamped metal mount for a distinctive look. The mirror-finished bracket, chrome-plated mounting hardware and Vivid Black insert contrasts with a leather or vinyl backrest pad to dress your Touring bike in style.

52825-05

$59.95

Fits Touring models equipped with H-D Detachables Sissy Bar Upright P/N 52805-97B, 52935-04A, 52933-97C, 5272306A, 52610-09A, 52627-09A, 52300257 or 52300258. Also fits ’18-later Softail models equipped with HoldFast Sissy Bar Uprights (except if equipped with Compact Size Pad).

172 TOURING & TRIKE

PASSENGER BACKREST PADS – MID-SIZED

Sized to fit Standard-Height and Tall Touring Sissy Bar Uprights. Available to match a wide variety of seat stitch designs, these Mid-Sized Backrest Pads feature a gentle curved shape that cradles the spine and provides hours of passenger comfort.

Fits Standard-Height H-D® Detachables™ Passenger Sissy Bar Uprights P/N 52300324, 52627-09A, 54247-09A, 5293397C or 52805-97B, Tall H-D Detachables Passenger Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Sissy Bar Upright 52300257 or 52300258 and Quick Release Sissy Bar Upright 52300415 and 52300324A. Also fits ’18-later Softail® models equipped with Short or Standard Height HoldFast™ Sissy Bar Uprights. Pad height 8.0"; width 12.0".

A. MID-SIZED PASSENGER BACKREST PAD – SMOOTH TOP-STITCHED Styled to match 2024 CVO Seats.

52300734

B. MID-SIZED PASSENGER BACKREST PAD – LEATHER Styled to match Leather Low-Profile Bucket Seat P/N 52918-98A. 52920-98B

C. MID-SIZED PASSENGER BACKREST PAD –TOP-STITCHED

Smooth top-stitched pad complements most seating surfaces. 52924-98B

D. MID-SIZED PASSENGER BACKREST PAD –COMFORT STITCH

Styled to match Comfort Stitch Seats and Rider Backrests. 51727-05A $139.95

E. MID-SIZED PASSENGER BACKREST PAD –’06-’10 STREET GLIDE® STITCHING

Styled to match the ’06-’10 Street Glide® model. 51633-06A $139.95

PASSENGER BACKREST PADS – OVERSIZED

Sized to fit Standard-Height and Tall Touring Sissy Bar Uprights. Available to match a wide variety of seat stitch designs, these Oversized Backrest Pads feature a large surface area and a generous curved shape that surrounds the passenger’s lower back and provides added support for hours in the saddle.

Fits Standard-Height H-D Detachables Passenger Sissy Bar Uprights P/N 52300324, 52627-09A, 54247-09A, 5293397C or 52805-97B, Tall H-D Detachables Passenger Sissy Bar Upright P/N 52723-06A, Premium H-D Detachables Sissy Bar Upright 52300257 or 52300258 and Quick Release Sissy Bar Upright 52300415 and 52300324A. Also fits ’18-later Softail models equipped with Short or Standard Height HoldFast Sissy Bar Uprights. Pad height 9.5"; width 13.5".

F. OVERSIZED PASSENGER BACKREST PAD – SMOOTH Smooth top-stitched pad complements most seating surfaces. 52886-98D $118.95

G. OVERSIZED PASSENGER BACKREST PAD – STUDDED Styled to match studded

TOURING & TRIKE 173

bungee cords. The H-D® Detachables™ rack can be completely removed from the bike in seconds and is designed to accept the internally wired LED Light Kit P/N 68065-10 or 68219-10 (sold separately) for added visibility from the rear. Rack Dimensions: 12.0" D x 12.75" W (Unexpanded); 12.0" D x 18.75" W (Expanded).

Fits '09-later Touring models equipped with a 4-Point Docking Hardware Kits (except '09-later CVO™ models with rigid mount Tour-Pak® luggage and '25-later FLTRXRRSE). Models equipped with Original Equipment rigid-mount Tour-Pak require purchase of appropriate H-D Detachables Tour-Pak Rack Kit. FLHX, FLHXS, FLHXST, FLTR, FLTRX

174 TOURING & TRIKE

Backrests & Racks

A. AIR WING H-D® DETACHABLES™ TWO-UP LUGGAGE RACK*

The low-profile aerodynamic styling defines the look of this Luggage Rack. Designed to work with or without H-D Detachables Passenger Backrests, this rack can be installed or removed from the Docking Hardware in seconds, creating a truly versatile ride. Available in mirror chrome or rich gloss black finish, the rack draws your eye with its sleek lines and the engraved Harley-Davidson script adds a signature touch. The die-cast wing and lightweight steel tubing are hand-polished before finishing for long-lasting beauty. For added visibility, the rack is designed to incorporate the internal wiring of the Air Wing Rack Light Kit (sold separately) for a clean look.

Fits '09-later Touring models (except '25-later FLTRXRRSE) equipped with 4-point Docking Hardware Kits. '09-later Touring models equipped with rigid-mount Tour-Pak® luggage carrier require purchase of appropriate H-D Detachables Tour-Pak Conversion Kit. FLHX, FLHXS, FLHXST, FLTR, FLTRX and FLTRXST models require separate purchase of Antenna Relocation Kit or Hidden Antenna Kit. Some FLHRC EU registration plates may interfere with rack. '24 FLTRXSTSE requires separate purchase of P/N 54000383A hardware kit. '25-later FLTRXSTSE and '26-later FLHXSTSE require separate purchase of P/N 54000337 hardware kit. '09-'23 FLXH, FLXHS, FLTR, FLTRX, FLTRXS models require separate purchase of antenna relocation kit or hidden antenna kit. 54283-09A

FLTRXSTSE and '26-later FLHXSTSE require separate purchase of P/N 54000337 hardware kit. '09-'23 FLXH, FLXHS, FLTR, FLTRX, FLTRXS models require separate purchase of antenna relocation kit or

models equipped with rigidmount Tour-Pak luggage require purchase of appropriate H-D Detachables Tour-Pak Conversion Kit. FLHX, FLHXS, FLTR and FLTRX models require separate purchase of Antenna Relocation Kit or Hidden Antenna Kit. Some FLHRC EU

C.

176 TOURING & TRIKE

Luggage Accessories KING TOUR-PAK® LUGGAGE BACKREST PADS

Wrap-around King Tour-Pak Luggage Backrest Pads are shaped to surround your passenger in comfort. The curved shape cradles the back and the integrated side wings fit naturally beneath your passenger’s arms for added support. These backrests feature easy-to-install isolation mounts to reduce contact between the pad and the Tour-Pak luggage. King Backrest Pads are available in a variety of styles to match most seating surfaces.

TOURING & TRIKE 177

178 TOURING & TRIKE

Tour-Pak® Luggage Accessories

A. GRAND TOUR-PAK® BACKREST PAD – SMOOTH

This Grand Tour-Pak® Backrest Pad is shaped to surround your passenger in comfort. The curved shape cradles the back, and the integrated side wings fit naturally beneath your passenger's arms for added support. Backrest pad is shaped to surround your passenger in comfort. Easy-to-install isolation mounts to reduce contact between the pad and the Tour-Pak luggage. Clean, smooth styling complements most seating surfaces.

52300748 $274.95

Fits Touring and Trike models equipped with Grand Tour-Pak Luggage Carrier. Original Equipment on FLHXL, FLTRXL and FLHLT models.

B. GRAND TOUR-PAK LOWER BACKREST PAD – HEATED

Maximize cool-weather passenger comfort with this Heated Lower Backrest Pad. Designed to replace the Original Equipment lower backrest pad on the Grand Tour-Pak Luggage Carrier, this pad is the perfect complement to a heated seat. Smooth black styling matches the Original Equipment lower backrest pad. Off/High/Low heat setting controlled in tandem with the passenger seat setting the passenger heated seat switch. Requires dealer installation to ensure software connectivity.

52300821 $299.95

Fits '26-later FLHXL, FLTRXL and FLHLT with Original Equipment seat. Original Equipment on '26-later FLHXLSE and FLHLTSE models. Dealer Digital Technician update required for installation.

C. GRAND TOUR-PAK PASSENGER ARMRESTS

If your passenger is happy, you'll be happy! These premium passenger armrests have been ergonomically designed to provide the ultimate in passenger comfort and are fully adjustable for individual fit. Soft pads provide excellent forearm support on a long ride. Armrests adjust through several support arm locations and pad angles for a custom fit. Both armrests conveniently swing out of the way for easy mounting and dismounting. Robust adjustment mechanism keeps the arms in place while riding without a passenger. Highquality black vinyl upholstered pads and support arms blend beautifully with Original Equipment seats and speaker pods. Complete kit includes all required installation hardware.

52400351 $424.95

Fits '23-later Touring models equipped with Grand Tour-Pak Luggage. Does not fit with H-D Detachables Tour-Pak Mounting Racks or Screamin' Eagle/Ohlins Remote Reservoir Rear Shocks. Not compatible with Sundowner Heated Seats P/N 52000668 or 52000812.

52400352 $404.95

Fits '26-later Trike models equipped with Grand Tour-Pak Luggage.

TOURING & TRIKE 179

Boom! Audio Stage II Tour-Pak Speaker Kit P/N 76000526A. Does not fit ’23-later FLHXSE, FLTRXSE, ’24-later FLHX and FLTRX models with Chopped Tpak.

E. H-D DETACHABLES TWO-UP TOUR-PAK LUGGAGE MOUNTING RACK*

Change your riding style in less than 60 seconds. The ultimate in touring flexibility, this Tour-Pak Luggage Rack makes the convenience and protection of a Razor-Pak, Chopped, King or Leather Tour-Pak Luggage System a simple on-andoff proposition. Simple turn latches mount the rack to the bike’s docking points and allow you to replace the Tour-Pak luggage with a detachable sissy bar upright for around-town cruising. The mounting rack positions a Tour-Pak behind the passenger pillion and allows the passenger to use the luggage as a supporting backrest. Adjustable over a .75" range, the Tour-Pak can be located for maximum passenger room and comfort. Tour-Pak, Passenger Backrest Pad and Docking Hardware Kit sold separately.

Fits ’14-later FLHR, FLHRC, FLHRXS, FLHRSE, FLHT, FLHX, FLHXS, FLHXSE, FLHXST, FLTRXST, FLTRX and FLTRXS models. Requires separate purchase of Docking

Hidden AM/FM/WB Antenna Kit P/N 76000863. 53276-09B Chrome. $229.95 Fits ’97-’08 Road King®, FLHT, FLHX and FLTR models equipped with required docking hardware. FLTR and FLHX models require Antenna Relocation Kit P/N 76326-00A. Does not fit with Layback License Plate Mounting Kit P/N 53385-00. Some EU registration plates may interfere with Tour-Pak Rack. Models with rear fender tip trim can be adapted with the separate purchase of License Plate Relocation Kit P/N 60095-00A. 53276-04A Chrome. $225.95

180 TOURING & TRIKE

Tour-Pak® Racks

A. AIRWING GRAND TOUR-PAK® LUGGAGE RACK

The low-profile aerodynamic styling of this Air Wing Tour-Pak Luggage Rack enhances the look of the Grand Tour-Pak lid. The rich gloss black or chrome finished rack draws your eye with its sleek lines, and the engraved Harley-Davidson script adds a signature touch. Protects both Grand Tour-Pak carrier lid and passenger backrest from scratches. Die-cast wing and lightweight steel tubing are hand-polished before finishing for long-lasting beauty. Kit includes all necessary mounting hardware.

Fits '23-later Touring® and Trike models with Grand Tour-Pak carrier lids. Due to the hand applied nature of the Tour-Pak paint schemes, slight inconsistencies may be noticed with the rack installed. Trim may cover pinstripes or two-tone paint lines on some vehicles.

53001083 Gloss Black.

B. GRAND TOUR-PAK PREMIUM LUGGAGE RACK

This full-sized rack is designed to complement a Grand TourPak luggage carrier equipped with an armrest-style passenger backrest. The rack protects both Tour-Pak® carrier's lid and passenger backrest from scratches. Lightweight steel tubing. High-quality welded joints. Hand-polished and chrome-plated for a long-lasting finish. Includes all necessary mounting hardware

Fits '23-later Touring and Trike models with Grand Tour-Pak carrier lids. Due to the hand applied nature of the Tour-Pak paint schemes, slight inconsistencies may be noticed with the rack installed. Trim may cover pinstripes or two-tone paint lines on some vehicles.

53001081 Gloss Black.

182 TOURING & TRIKE

Tour-Pak® Racks

A. STEALTH TOUR-PAK® LUGGAGE RACK*

Style and practicality in one. This classic six-bar Tour-Pak luggage rack flows with the long and lean lines of today’s custom rides. The cantilevered aerodynamic rails appear to float above the center spar, imparting a lighter-than-air profile. Hidden hardware adds to the clean design. The Stealth Rack mounts in the same position as the Original Equipment Ultra Limited rack or the accessory Premium and Air Wing Tour-Pak luggage racks, so no additional drilling is required on those models. Use Bungee Cord Soft-Hook Extensions P/N 52300140 to keep your luggage firmly in place.

Fits King, Chopped and Razor-Pak Tour-Pak carrier lids. Does not fit with Color-Matched Tour-Pak Spoiler kits.

53000247 Gloss Black.

B. SADDLEBAG SUPPORT KIT

$255.95

Complete the stripped-down look by eliminating the rear saddlebag guards. This kit replaces the Original Equipment loop saddlebag guard and support with an inconspicuous bolt-on bar that supports the saddlebag for a clean, custom appearance. Kit includes left and right support and all necessary mounting hardware.

90881-09A

$269.95

Fits ’09-’13 Touring models (except FLHRC and FLHTCUSE). Stock on ’09-’13 FLHX, FLHXSE, FLTR, FLTRU, FLTRX, FLTRXSE, ’13 FLHRSE and ’09 FLTRSE models. Does not fit with Saddlebag Filler Strip Kits.

C. REAR SADDLEBAG GUARD AND SUPPORT KIT*

Add protection and style to your ride. Complete kit replaces the under-saddlebag support found on some Touring models with loop-style saddlebag guards for a traditional look. Featured as Original Equipment on many Touring models, these chromeplated guards protect the leading edge of the saddlebag, and are shaped to accept Saddlebag Guard Bags (sold separately) for added storage. Kit includes saddlebag supports, left and right guards and all necessary mounting hardware.

90200787 Chrome.

$289.95

Fits ’14-'25 FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXST, FLHXSE, FLTRU, FLTRUSE, FLTRX, FLTRXS, FLTRXST and FLTRXSE models. Stock on ’14-'25 FLH, FLHR, FLHRC, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE, FLTRK and FLTRKSE models. Does not fit ’23-later FLHXSE and FLTRXSE and ’24-later FLHX and FLTRX models.

90200788 Gloss Black.

$289.95

Fits ’14-'25 FLHRSE, FLHRXS, FLHT, FLHX, FLHXS, FLHXST, FLHXSE, FLTRU, FLTRUSE, FLTRX, FLTRXS, FLTRXST and FLTRXSE models. Stock on ’14-'25 FLH, FLHR, FLHRC, FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLHTKSE, FLTRK and FLTRKSE models. Does not fit ’23-later FLHXSE and FLTRXSE and ’24-later FLHX and FLTRX models.

TOURING & TRIKE 183

184 TOURING & TRIKE

Saddlebag Guards

A. SADDLEBAG TIP-OVER BAR SET – BLACK

Get tip-over protection with sleek low-profile West Coast performance style, without “old school” hoops. Provides limited cosmetic vehicle protection to the saddlebags in a lowspeed tip-over event. Features end caps with Harley-Davidson logo that are easy to replace in event of low-speed tip-over. Factory integrated design for an ideal fit and validated performance. Complementary fit and finish to pair with Flat-Out Bar P/N 49000242.

90202657

$399.95

Fits ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE, '25 FLHXU, and '26-later Touring models.

B. SADDLEBAG GUARD RAILS

Bolt on style and protection. These Saddlebag Guard Rails surround and protect the lower portion of the bag, and add a traditional look to your Touring bike. The thick-walled chromeplated tubing and the elegant cast mounts clamp securely to the Original Equipment saddlebag guards for a seamless look. Offered in Chrome or Gloss Black finish to match any bike style.

Fits '23-later FLTRXSE and FLHXSE, '24-later FLTRXSTSE, FLHX and FLTRX, '25 FLHXU and '26-later Touring mdoels. Installation of saddlebag guard PNs 90202507 or 90202508 is required if not originally equipped.

90202917 Black. $339.95

90201916 Chrome. $339.95

Fits '14-'25 Touring models (except FLHRC, FLHRSE, FLHXSE, FLTRXSE and '24-later FLHX, FLTRX, FLTRXSTSE and '25-later FLHXU and FLTRXRRSE). FLHT, FLHRXS, FLHX, FLHXS, FLHXST, FLTRX, FLTRXS and FLTRXST require separate purchase of Saddlebag Guard and Support kit 90200787 or 90200788. Does not fit with stretched side covers or CVO style rear fender system.

90201903 Chrome. $339.95

90201902 Gloss Black. $339.95

TOURING & TRIKE 185

the Original Equipment chrome-plated guards featured on many Touring models, the blacked-out finish minimizes the look without a reduction in protection.

90200791 $249.95

Fits ’14-'25 FLHR, FLHRC, FLHTCU, FLHTCUL,

186 TOURING & TRIKE

Luggage Accessories

A. PREMIUM TOUR-PAK® LUGGAGE FITTED LINING

Line your Touring bike’s luggage to protect your belongings and reduce noise and rattles on the road. Soft-touch felt-finish liner is formed to the interior for a perfect fit. Molded base and sides maximize the interior room, and one-piece design allows easy removal for cleaning and maintenance.

53000323 King Tour-Pak® luggage. $114.95 Fits ’14-later Touring and Tri Glide® models equipped with King Tour-Pak luggage.

53301-06 King Ultra Tour-Pak luggage. $99.95

Fits ’93-’13 Touring (except FLHTK and ’10-later CVO™ models) and Trike models equipped with King Tour-Pak luggage with incandescent wrap-around Tail Lamp Kit. Does not fit with Tour-Pak bottom tub mounted accessories.

53000322 Chopped Tour-Pak luggage. $104.95 Fits ’14-later Touring and Tri Glide models equipped with Chopped Tour-Pak luggage. Does not fit with Tour-Pak bottom tub mounted accessories. Does not fit Tri-Glide models or models with Original Equipment King Tour-Pak.

B. PREMIUM FITTED SADDLEBAG LINING

Protect your belongings and reduce noise and rattles on the road. Premium soft-touch felt-finish liner is formed to the hard saddlebag interior for a perfect fit. Molded base and sides maximize the interior room, and one-piece design allows easy removal for cleaning and maintenance.

90202608 $207.95

Fits '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE and '25-later Touring models (except FLHRXS).

90200918 $207.95

Fits ’14-later Touring models equipped with Color-Matched Hard Saddlebags (except FLHTKSE, FLHXSE, FLTRKSE and FLTRXSE, ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and '26-later Touring models).

C. TRUNK DOOR ORGANIZER

TOURING & TRIKE 187

For on-the-road storage and efficiency, this ingenious organizer helps keep smaller items conveniently located on your trunk door for easy access. The easy-to-install self-adhesive organizer features two large nylon-mesh pockets with hookand-loop-secured flaps that offer quick access to keys, cell phones, glasses, gloves and maps. Organizer features an embossed Harley-Davidson script logo. Add the matching Tour-Pak Lid Organizer P/N 53249-01B inside the Tour-Pak luggage for maximum organization. 93300001

$71.95

Fits '26-later FLHLT, FLHLTSE, '09-'25 FLHTCUTG and '10-'11 FLHXXX models.

G.

LID FITTED LINING WITH ORGANIZER – GRAY Add practical storage to your Tour-Pak luggage. This Lid Lining features a convenient six pocket organizer to keep smaller items conveniently at hand, and is shaped to fit the contours of the Tour-Pak lid for a

LID ORGANIZER

true innovation in

convenience and

this ingenious

under

items conveniently

lid for easy access. The organizer features five different-sized nylon-meshed pockets, as well as two flaps for additional storage. A great way to keep keys, cell phones, glasses and papers handy.

53249-01B $109.95

Fits ’93-’13 Touring and Trike models equipped with a King, Ultra, Chopped or Razor-Pak Tour-Pak. Does not fit ’08-later CVO™ Ultra models with Power Locks, or models equipped with Tour-Pak Spoiler Kit P/N 53149-series, Tour-Pak Light P/N

188 TOURING & TRIKE

Luggage Accessories

A. SADDLEBAG WALL ORGANIZER

Convenient storage system equips the interior wall of your Color-Matched Saddlebags for easy access to keys, cell phones, maps, and gloves. The organizer features a combination of mesh and enclosed pouches and pockets that are sized for safe, rattle-free packing. The organizer features a rigid backing that easily attaches to the wall of the saddlebag with the Original Equipment quick-release saddlebag fasteners and is shaped to follow the contour of the saddlebag interior to maximize storage space. Kit includes left- and right-hand organizer.

90202609 Style.

$117.95

Fits ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later Touring models (except FLHRXS).

B. SADDLEBAG WALL ORGANIZER

Convenient storage system equips the interior wall of your Color-Matched Saddlebags for easy access to keys, cell phones, maps and gloves. The organizer features a combination of mesh and enclosed pouches and pockets that are sized for safe, rattle-free packing. The organizer features a rigid backing that easily attaches to the wall of the saddlebag with the Original Equipment quick-release saddlebag fasteners. Kit includes left- and right-hand organizer.

90200882

$117.95

Fits ’14-’24 Touring models (except ’23-later FLHXSE and FLTRXSE, and ’24 FLHX, FLTRX, and FLTRXSTSE) equipped with Color-Matched Hard Saddlebags. Also fits ’25-later FLHRXS models.

C. TRIKE SADDLEBAGS

Add storage at your fingertips. These vinyl-wrapped rigid side bags are a perfect match to either the Original Equipment or accessory seats and are contoured to fit comfortably under the passenger’s legs. Featuring an easy-to-grip chrome-plated finger pull with Bar & Shield Logo, the forward-opening bags snap shut with a strong magnetic closure. The interior can accommodate 2 soda cans or water bottles side by side and is the ideal spot for sunscreen, glasses and your cell phone. Luggage capacity: 700 cubic inches total.

84031-11

$539.95

Fits '26-later FLHLT, FLHLTSE, '09-later FLHTCUTG and '10'11 FLHXXX models.

D. OVERWATCH TRIKE FENDER BAG

Add even more luggage capacity to your Trike model with these Overwatch Trike Fender Bag. Designed specifically to fit over the left and right rear fenders with flexible mounting options that do not require the bags to be permanently fixed to the vehicle. Add rugged and practical storage that does not affect passenger accommodations. A modern and rugged way to add storage space without impacting passenger accommodations. Hi-vis gray interiors make the bag contents visible even in low light. Flexible fender mounting does not require saddlebags to be permanently fixed to the vehicle. Top zippers to access the two sections of the storage space. MOLLE-style attachment system on the bag's exterior makes it easy to attach small pouches to this bag. Sealed zippers for water resistance. Sold as a pair.

• DIMENSIONS (approximate): 25.9" L x 8.35"W x 13.3" H (each)

• CAPACITY (approximate): 12.2L (each)

93300190 $499.95

Fits '26-later FLTRT, FLHLT and FLHLTSE models. All models require appropriate Transparent Paint Guard Kit P/Ns 11100354 and 11100355.

TOURING & TRIKE 189

93300070 Hard Saddlebags. $174.95 Fits ’93-later Touring models equipped with Hard Saddlebags. Sold in pairs.

F. TRAVEL-PAKS

Simplify packing and unpacking your motorcycle. These wellconstructed, water-resistant bags are designed to fit perfectly into Touring model luggage systems. The soft sides conform to the interior of the luggage to help use every available inch of space. Styled with a Bar & Shield logo, they feature heavyduty zippers and convenient carrying handles.

53605-97 King Tour-Pak luggage. $71.95

Fits ’93-later Touring and Trike models equipped with King and Ultra Tour-Pak luggage.

91885-97A Hard Saddlebags. $79.95 Fits ’93-later Touring models equipped with Color-Matched Hard Saddlebags and ’09-’17 VRSCF models equipped with Rigid Saddlebags P/N 91172-09. Sold in pairs.

G SADDLEBAG COOLER

Keep beverages and snacks cold right in your saddlebag on those hot summer rides. This zippered bag is fully lined and insulated, and fits the full length of your saddlebag.

90200991

$99.95

Fits ’93-later Touring models equipped with Color-Matched Hard Saddlebags.

190 TOURING & TRIKE

Luggage Accessories

A. TRUNK TRAVEL-PAKS

These well-constructed, ballistic nylon bags are designed to fit perfectly into the rear or top-load trunk of the HarleyDavidson® Trike models. Styled to compliment the Premium Luggage Collection, the twin bags feature white piping and a reflective Bar & Shield logo. The bags feature glove-friendly zippered access to the main compartment and convenient outer pouches. Comfortable carrying straps make transportation a breeze. Sold in pairs.

53000431 $126.95

Fits ’09-later Trike models.

B. SADDLEBAG LID BRA – ’24-LATER MODELS

Protect your saddlebags from boot scuffs, stone chips and road debris. These custom-fit Saddlebag Lid Bras are made with non-abrasive, fleece-backed vinyl material. Easy to install or remove with new and improved hook-and-loop tab design. Sleek design that integrates onto your saddlebag and enhances the look of your vehicle. Feature small Bar & Shield logos stitched into the material. Kit includes left and right-side Lid Bras.

90202599

$119.95

Fits '24-later FLHX, FLTRX and FLTRXSTSE, '25 FLHXU and '26-later FLHXL, FLHXSTSE, FLTRXL and FLXHLSE. Does not fit with Saddlebag Lid Speakers.

C. SADDLEBAG LID BRA

Protect your saddlebags from boot scuffs, stone chips and road debris. These custom-fit Saddlebag Lid Bras are made with non-abrasive, fleece-backed vinyl material and feature small Bar & Shield logos. Easy to install with hook-and-loop tabs. Kit includes left and right side Lid Bras.

90200992

$109.95

Fits ’14-later Road King®, ’14-’24 Road Glide® and Electra Glide® (except ’24 FLTRX). Fits ’14-’22 CVOs without Saddlebag Speakers and ’23 CVO™ Road Glide® Limited. Does not fit with Saddlebag Lid Rails, Saddlebag Lid Spoilers or Saddlebag Lid Speakers.

57805-03A

$109.95

Fits ’93-’13 Touring models equipped with Color-Matched Hard Saddlebags. Does not fit with Police Model Hard Saddlebags, Saddlebag Lid Rails, Saddlebag Lid Spoilers, or Saddlebag Wing Tips.

192 TOURING & TRIKE

Foot Controls

A. BLACK RIDER FOOTBOARD PANS

Complete the blacked-out transformation. Replace the Original Equipment chrome footboard pans with sinister gloss black. Kit includes both the right and left pan, and is installed using the Original Equipment hardware and insert pad. Custom footboard inserts are sold separately.

Fits ’12-’16 FLD and ’86-’17 FL Softail® (except FLS, FLSS, FLSTFB and FLSTFBS), ’86-later Touring (except FLHTCUL, FLHTCUL TC and FLHTKL) and Trike models.

51322-08 Traditional Shape. $107.95

B. JIFFY STAND EXTENSION

Jiffy Stand Extension Kits have been ergonomically designed to simplify the deployment and retraction of the jiffy stand. The extension is shaped to simplify locating the tab with your boot, and aid in swinging the jiffy stand into position. The move feels natural, and adds confidence when parking your motorcycle in a tight spot. Kit mounts to Original Equipment jiffy stand, and includes all required mounting hardware.

Fits ’91-later Touring models. Does not fit models equipped with Defiance footboards, Burst footboards, or Rider Running Boards P/N 50500158.

50000263 Gloss Black.

50000023 Chrome.

C. JIFFY STAND AND MOUNT KIT – GLOSS BLACK

With this beautiful gloss black jiffy stand kit, your Dark Custom Touring model won’t just stand on its own – it will stand out. Using the Original Equipment jiffy stand and mount to ensure quality and fitment, these pieces are finished in rich gloss black to blend into the frame and help disguise this very visual component on the vehicle. Installation reuses Original Equipment spring and hardware.

50000276 $240.95

Fits ’17-later Touring Models.

D. RIDER FOOTBOARD HEEL GUARD

Avoid damaged boots and hours of cleaning melted rubber scuff marks from your exhaust shield. This Heel Guard mounts to the right-side rider footboard and protects your boot from contact with the hot exhaust shield. The subtle curved shape keeps the boot heel away without restricting fore-and-aft movement of the rider’s foot. Kit includes chrome guard with cutaway Bar & Shield logo and all mounting hardware.

50500225

TOURING & TRIKE 193

Conceal the splined end of the shifter

$74.95

Fits ’12-’16 FLD, ’86-’17 FL Softail, ’86-later Touring and ’09later Trike models equipped with Traditional and Swept Wing footboards. Does not fit models equipped with Half-Moon, Tapered, Airflow, Defiance, Dominion™ or Burst footboards, Extended Reach Rider Footboards P/N 50409-04 or 5414510, Rider Running Boards P/N 50500158 or Screamin’ Eagle® Fat Exhaust Shields.

this Gloss Black Shifter Shaft Lever creates an uninterrupted blacked-out look from the front of the engine to the rear. Manufactured from Original Equipment components, this lever is an exact replacement for the factoryinstalled chrome-plated part.

33900186 $43.95 Fits ’93-’16 Touring and Trike models.

G. CUSTOM GEAR SHIFT LINKAGE – ROUND GLOSS BLACK Add the finishing touch to your blacked-out ride. This Gloss Black Shift Linkage is easy to install and includes a transmission lever cover and decorative acorn nuts and bolts for a complete custom look.

33600259 $119.95

Fits ’86-later Softail (except ’18-later FXBB, FXBBS, FXLR, FXLRS, FXLRST and ’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 FLSTS or models equipped with Softail Extended Reach Forward Controls.)

H. CUSTOM GEAR SHIFT LINKAGES

Kick your custom into gear with this collection of high-quality Custom Shift Linkages. Available in a variety of designs to match your bike’s style, these aluminum linkages feature aircraft-quality rod ends for easy adjustment and smooth operation. The easy-to-install linkage kit also includes a transmission lever cover for ’86-’17 Softail and ’86-’16 Touring and Trike models, and decorative acorn

and bolts for a complete custom look. Fits ’86-later Softail (except ’18-later FXBB, FXBBS, FXLR, FXLRS and FXLRST and ’20-later FXST), Touring and Trike models. (Does not fit ’97-’99 FLSTS or models equipped with Softail Extended Reach Forward Controls.)

1. 34018-08 Slotted – Black Anodized. $149.95

2. 34850-09 Skull. $154.95

3. 33801-09 Harley-Davidson Script. $139.95

4. 33760-09 Slotted with Bar & Shield Logo. $149.95

5. 33814-98A Round. $104.95

I. GEAR SHIFT LINKAGE COVERS

A simple and inexpensive way to detail your Touring bike. These easy-to-install chrome-plated covers conceal the stock gear shifter linkage for a brilliant finish. Kit includes all necessary mounting hardware.

Fits ’99-’16 Touring and Trike models with stock gear shift linkage.

46303-01 Harley-Davidson Script. $54.95

194 TOURING & TRIKE

Foot Controls

A. BOARD-TO-PEG CONVERSION KIT

Add an aggressive look to your Touring motorcycle. These support kits are designed to allow installation of mini footboards and footpegs. Kit Includes left and right mounting brackets and all necessary installation hardware. Mini footboards and footpegs sold separately.

Fits ’09-later Touring models (except ’23-later FLHXSE and ’18-later FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU). Requires separate purchase of ’18-later OE or accessory Softail® Standard rider foot pegs.

50501642 $219.95

B. ENDGAME COLLECTION SHIFT LEVER

Styled to complement the Endgame Collection controls, this Shift Lever features a slotted design that will give your bike a high-tech, industrial look.

Fits ’86-later FL Softail, ’88-later Touring and 08-later Trike models.

33600301 Black. $129.95

C. BILLET STYLE HEEL/TOE SHIFT LEVER –EXTENDED REACH

Stretch out in style. Both the heel and toe sections of this Shift Lever are 1.0" longer than traditional levers, separating the distance between the heel/toe shift by 2.0" total. This added space provides a comfortable riding position for a tall rider, and allows a rider with a large boot extra room to move. Styled to complement our billet style mirror stems, these Billet Style Shift Levers are forged, machined and polished for a beautiful, custom look. When combined with the available Extended Reach Brake Lever, long-limbed riders can straighten their legs and ride in comfort. Kit includes a front and rear lever and mounting hardware.

33600001 Chrome. $199.95

Fits ’86-’17 FL Softail, ’88-later Touring (except ’23 FLHXSE and FLTRXSE) and ’08-later Trike models. Adversary Touring footboards 50502250 or 50502251 do not fit with Extended Heel Shifters 33600001 or 33600076.

TOURING & TRIKE 195

196 TOURING & TRIKE

Foot Controls

A. PASSENGER MINI FOOTBOARD MOUNT KIT

This mount kit permits replacement of the Original Equipment passenger footboards with footpegs or mini footboards, and moves the passenger’s foot rearward and inward to give the rider more space between the rider footboard and the passenger foot support. The new position clears the path for your feet to ease walking the bike in and out of parking spaces. When folded, the pegs are tighter to the bike to reduce the chance of contacting the passenger foot support with your calf. Original equipment on FLHTCUL and FLHTKL model. Kit includes left and right mount, and required installation hardware. Malemount style passenger footpegs or mini-footboards sold separately.

50500403A $107.95 Fits ’93-later Touring models. Does not fit Trike models.

B. PASSENGER FOOTPEG MOUNT – GLOSS BLACK

Manufactured from Original Equipment components for proper fit and proven strength, these footpeg supports replace the factory chrome-finished mounts for a clean, custom look. When installed with blacked-out accessory footpegs, these gloss black footpeg supports tie the pegs to the bike for a seamless, no-contrast look. Kit includes right and left hand mount.

50500578 $160.95

Fits ’93-later Touring models. Does not fit Trike models.

C. PASSENGER FOOTPEG MOUNT KIT – CHROME

Designed specifically for the sport-touring rider, this chromeplated kit allows passenger footboards to be removed and replaced with a variety of male mount-style Harley-Davidson® footpegs. The kit has 3 adjustable height positions and includes all hardware.

50198-97C $169.95 Fits ’93-later Touring models. Does not fit Trike models.

D. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT

Maximize your passenger’s riding comfort. Proper foot position reduces the cramped or stretched-out feeling, and relieves pressure on the knees and the tailbone. These adjustable mounts raise and lower the passenger footpeg to accommodate taller and shorter passengers. Easy to adjust with common tools, the mount adjusts through a 360° range (depending on model), allowing both fore and aft and up and down height adjustment. Kit includes left and right adjustable support assembly and all required mounting hardware. Footpegs sold separately.

50763-09

$160.95

Fits models with H-D® male mount-style passenger footpeg supports (except Softail® models). Does not fit with Heel Raiser Footpeg Kit P/N 50178-09. Does not fit the rider position.

E. PASSENGER FOOTBOARD SUPPORTS

Add the comfort and convenience of passenger footboards to your Touring motorcycle. These supports are designed to allow installation of traditional D-shaped, Swept Wing, Tapered or Old-Style Passenger Footboards (sold separately) on Touring models. Kit includes left and right supports and installation hardware. Add your choice of passenger footboard pan design and footboard insert to complete your custom look. Fits ’93-later Touring and Trike models.

TOURING & TRIKE 197

Fits ’10-later Touring models with Original Equipment passenger footboards (except CVO™ models or models equipped with Adjustable Passenger Footboard Mount Kit P/N 50768-07A). Also fits ’93-later Touring models equipped with Passenger Footboard Kit P/N 50378-07B, 50379-07B or 53070-00A. Does not fit Trike models or models equipped with sidecars. Will not fit with Footpeg P/N 49117-77TB, 49110-98, 91821-85, 50643-82, 50647-82, 49500-92T, 49234-98, 50978-99, 50976-99, 50911-08, 50113-10, 5069508, 49128-82, 50056-10, 50039-10, 49312-10, 50451-09 and 50178-09.

G. REACH PASSENGER FOOTBOARD MOUNT KIT

Kit raises the height of your passenger footboards by approximately 2.25" for increased passenger comfort. Especially desirable on ’97-later Touring models due to the frame and saddlebag guard change. Includes mounting hardware. 50789-99B

$179.95 Fits ’93-later Touring models. Does not fit Trike models. Does not fit with saddlebag guard bags.

198 TOURING & TRIKE

Foot Controls

A. PASSENGER FOOTBOARD AND MOUNT KIT

Convenient bolt-on installation. Includes specially designed mounting stud/brackets for proper installation. Footboards fold up when not in use. Kit includes Original Equipment-style aluminum footboards, rubber pads, mounting hardware and passenger footboard supports.

50379-07B

$160.95

Fits '93-later Touring (except '25-later FLTRXRRSE) and '09'25 Trike models.

B. STREAMLINER PASSENGER FOOTBOARD AND MOUNT KIT

Styled to match the rider footboards on the Road King® Custom, Road Glide® Custom and Street Glide® models, these Swept Wing Passenger Footboards feature a Streamliner-style rubber pad surrounded by a chrome accent. The smooth Swept Wing footboard pan is chrome-plated throughout to add a custom touch, even in the folded position. Designed for convenient bolt-on installation, the complete kit includes chrome-plated aluminum footboards, rubber pads, mounting hardware and passenger footboard supports.

50378-07B $442.95

Fits ’93-later Touring models. Does not fit Trike models.

C. PASSENGER FOOTBOARD PANS – BLACK

Complete the blacked-out transformation. Replace your chrome Passenger Footboard Pans with sinister black. Kit includes left- and right-side Footboard Pans and is installed using the Original Equipment hardware. Custom Footboard Inserts and Footboard Supports sold separately.

Fits ’06-’17 Dyna®, ’18-later Softail® (except FXDRS, FXFB and FXFBS) and ’86- later Touring models equipped with passenger footboard supports. Does not fit Trike models.

50501610 Classic Style. $199.95

D. SWEPT WING PASSENGER FOOTBOARD PANS

These unique Swept Wing Passenger Footboard pans complement the Swept Wing Rider Footboard shape, and allow you to replace the Original Equipment passenger footpegs on certain models with footboards. When folded, the footboard displays a mirror chrome surface in your choice of smooth or ball-milled, grooved design. Footboard inserts and footboard supports sold separately.

Fits ’06-’17 Dyna, ’00-later Softail (except FXDRS, FXFB and FXFBS) and ’86-later Touring models equipped with passenger footboard supports. Does not fit Trike models. 50716-04 Chrome – Smooth.

TOURING & TRIKE 199

200 TOURING & TRIKE

Engine Guards

A. MUSTACHE ENGINE GUARD*

Combine classic shape and modern function for a unique twist on engine protection. The flow of this engine guard complements the bike’s traditional style while the gracefully curved upper section incorporates highway pegs into the shape. The integrated rubber pads offer a comfortable and slip-resistant cushion for your feet while traveling the open road. One-piece engine guard kit includes all required mounting hardware.

Fits ’09-'25 Touring and Trike models (except Road Glide®, ’23-later FLHXSE and ’24-later FLHX and ’25-later FLHXU). Does not fit models equipped with fairing lowers. ’15-later FLRT models require the separate purchase of Bracket P/N 45700054. ’10-’11 FLHXXX models require the separate purchase of Bracket P/N 83865-09.

49155-09B Chrome. $374.95

49442-10A Gloss Black. $374.95

B. ENGINE GUARD – CHROME*

Protect your bike without sacrificing ground clearance or style. The one-piece engine guard is designed to complement the lines of the motorcycle, and the bright chrome finish adds the perfect finishing touch.

49184-09A

$299.95

Fits ’09-'25 Touring except (’18-later FLTRXSE, ’21-later FLTRXS, ’22-later FLTRXST, ’23-later FLTRT and FLHXSE and ’24-later FLHX, FLTRX, and FLTRXSTSE and ’25-later FLHXU) and Trike models. ’15- later FLRT models require the separate purchase of bracket P/N 45700054. ’10-’11 FLHXXX models require the separate purchase of Bracket P/N 83865-09.

C. ENGINE GUARD – GLOSS BLACK*

Protect your bike without sacrificing ground clearance or style. The one-piece engine guard is designed to complement the lines of the motorcycle, and the black finish adds the perfect finishing touch. Before the tough black powder coat finish is applied, these engine guards get an extra layer of protection from an E-Coat dip. So go on and install Engine Guard Mount Footpegs because this finish will go the distance.

49050-09A

$299.95

Fits ’09-'25 Touring and Trike models (except ’18-later FLTRXSE, ’21-later FLTRXS or ’22-later FLTRXST). ’15- later FLRT models require the separate purchase of bracket 45700054, ’10-’11 FLHXXX models require the separate purchase of Bracket P/N 83865-09. Does not fit ’23-later FLTRT and FLHXSE, ’18-later FLTRXSE, ’21-later FLTRXS, ’22later FLTRXST and ’24-later FLHX, FLTRX, and FLTRXSTSE and ’25-later FLHXU models.

PREMIUM ADJUSTABLE PERFORMANCE SUSPENSION

Step up to the ultimate in handling and ride quality. Screamin’ Eagle ® /Öhlins ® Remote Reservoir Rear Shocks for Harley-Davidson ® Touring models were designed for Screamin’ Eagle ® Factory Team race bikes and it’s what the Wymans had on their Road Glide ® Special motorcycles. Fully adjustable for preload and compression/rebound damping, with a remote reservoir for optimal performance and style. Use these shocks to dial in your ideal combination of handling and ride, for the street or the track. Ride like a winner.

TOURING & TRIKE 203

A. SCREAMIN’ EAGLE®/ÖHLINS® REMOTE RESERVOIR REAR SHOCKS

Upgrade to Screamin’ Eagle® Factory Race Team suspension with these performance rear shocks. These high-performance rear shocks for Touring models were designed with Öhlins® specifically for Screamin’ Eagle Factory Team race bikes. Now you can experience the ultimate in handling and ride quality with these Screamin’ Eagle/Öhlins® Remote Reservoir Rear Shocks. These mono tube remote reservoir shocks are completely adjustable to match your riding style. Set the sag with the adjustable preload then fine tune the response with adjustable compression and rebound damping. These shocks perform great and add a performance style with a remote reservoir and exposed adjusters.

- Get a perfect factory fit. Reservoir brackets are designed to accommodate all Harley-Davidson® accessories

- Expertly tuned by Ohlins and Screamin’ Eagle for the aggressive performance bagger rider in mind

- Preload setting on both shocks allows suspension adjustment based on rider, passenger, and gear weight for optimal performance

- No tools required for compression and rebound damping adjustments so changes can be made quickly and easily

- High-performance style: Exposed remote reservoirs with stainless steel lines and Screamin’ Eagle/Öhlins branding

- Progressive rate springs stiffen quickly for improved control when you pick up the pace

- Standard Height with +8/-2 mm of length adjustment

- High-pressure nitrogen gas-charged design resists heat fading

- Low-friction shaft/seal head design for smooth performance

- 36mm piston diameter

- Includes billet aluminum preload adjustment tool

Fully serviceable and rebuildable

Fits ’14-'25 Touring models (except FLHTKL, FLHTCUL, ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, ’24 FLTRXSTSE and ’25-later FLHXU).

54000193

$1,699.95

204 TOURING & TRIKE

A. SCREAMIN' EAGLE®/ÖHLINS® REMOTE RESERVOIR REAR SHOCKS*

Upgrade to Screamin' Eagle Factory Race Team suspension with these performance rear shocks. These high-performance rear shocks for Touring models were designed with Öhlins specifically for Screamin' Eagle Factory Team race bikes. Now you can experience the same ultimate in handling and ride quality. These mono tube remote reservoir shocks are completely adjustable to match your riding style. Set the sag with the adjustable preload then fine tune the response with adjustable compression and rebound damping. Add performance style with a remote reservoir and exposed adjusters. Get a perfect factory fit tuned to complement Screamin' Eagle/ Öhlins Inverted Front end kits.

• Expertly tuned by Öhlins and Screamin' Eagle with the aggressive performance bagger rider in mind.

• High-performance style: Exposed remote reservoirs with stainless steel lines and Screamin' Eagle/Öhlins branding.

• Preload setting on both shocks allows suspension adjustment based on rider, passenger, and gear weight for optimal performance.

• No tools required for compression and rebound damping adjustments so changes can be made quickly and easily.

• New race-spec linear spring rate.

• Standard 13" Height with +8/-2 mm of length adjustment.

• High-pressure nitrogen gas-charged design resists heat fading and low-friction shaft/seal head design for smooth performance.

• 36mm piston diameter.

• Includes billet aluminum preload adjustment tool. Fully serviceable and rebuildable.

• Reservoir brackets are designed to accommodate all HarleyDavidson® Two-Up accessories, rear lighting and saddlebag lids.

Fits '26-later Touring models, '23-later FLHXSE and FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE, and '25-later FLHXU models. Does not fit with Sissy Bar Uprights P/N 45248-09A, 52627-09A, 52610-09A, and 54247-09A.

54000350 Black. $1,699.95 54000351 Gold. $1,699.95

TOURING & TRIKE 205

B. SCREAMIN' EAGLE®/ÖHLINS® INVERTED FORK LEGS* Upgrade to the premium performance of Screamin' Eagle Factory Race Team suspension. These 48mm Öhlins forks legs are developed in partnership between Öhlins and HarleyDavidson offer no-compromise front suspension performance for confidence-inspiring handling. Forks are fully adjustable for pre-load and compression and rebound damping. Inverted fork design provides enhanced front end rigidity with reduced steering inertia for unmatched handling and feedback to the rider. Requires separate purchase of vehicle specific installation kit for models not factory equipped with an inverted front fork.

• Expertly tuned by Öhlins and Screamin' Eagle with the aggressive performance bagger rider in mind.

• Adjust preload plus rebound/compression damping on the top caps of the fork assemblies.

• Micro-polished inner tubes reduce friction for smooth performance.

• Gold TiN (titanium nitride) coating on the fork sliders reduces friction and increases wear resistance as compared to chrome plating.

• Forks utilize 30mm pistons and NIX technology to maintain optimal damping at higher frequency to improve control, noticed by the rider as improved tire contact feel.

• Fully serviceable and rebuildable.

• Provides a 13% weight reduction compared to the traditional original equipment front fork assembly.

• Separate purchase of vehicle specific Front Fork Installation kit required for FLHX, FLHXU, FLHXL, FLTRX, and FLTRXL models.

Fits '26-later Touring models, '23-later FLHXSE and FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE models, and '25 FLHXU models. Separate purchase of vehicle specific Front Fork Installation kit required for FLHX, FLHXU, FLHXL FLTRX, and FLTRXL models.

45400392A Black. $2,999.95 45400393A Gold. $2,999.95

C. SCREAMIN' EAGLE/ÖHLINS INVERTED FORK INSTALLATION KIT*

Required for installation of Screamin' Eagle X

206 TOURING & TRIKE

A. PROFILE® LOW TOURING FRONT SUSPENSION 1,2

Original Equipment on the Electra Glide® Ultra Low model, this front suspension kit reduces the front fork length by over .7", reducing seat height and delivering a closer to the pavement riding experience. This Profile Low front suspension utilizes Dual Bending Valve technology to preserve original ride quality, and features springs that are wound to allow a compliant, yet controlled ride. When paired with the required Low-Profile Hand-Adjustable Rear Suspension, the overall ride height is reduced, providing a rider with a short inseam additional confidence when stopped or maneuvering a vehicle in a parking lot. The kit includes two fork springs, two damper tubes, jiffy stand mount, seals and hardware.

45400218

$199.95

Fits ’17-'25 Touring models equipped with lowered rear shocks (except FLHTKL, ’18-later FLTRXSE, ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’24 FLTRXSTSE and ’25-later FLHXU models). Does not fit Trike models. FLHR, FLHRC, FLHTCU, FLHTK, FLHTKSE, FLHXST, FLTRU, FLTRK, FLTRKSE and FLTRXST models require installation of lowered rear shocks. Does not fit with 21" wheels.

B. PREMIUM RIDE FRONT FORK KIT – TRIKE MODELS

This Front Fork Kit provides improved handling performance by keeping the tire in contact with the road surface and features the Showa® Dual Bending Valve technology. This technology increases the dampening control of the fork, equaling the finest in both comfort and control for Trike riders.

45400219 $457.95

Fits ’14-’18 FLHTCUTG models. Original Equipment on ’19later models.

TOURING & TRIKE 207

C. PREMIUM RIDE HAND-ADJUSTABLE TOURING SHOCKS*

Experience the ultimate in superior ride quality with these Premium Touring Shocks. These shocks utilize a single tube, nitrogen charged emulsion design. The design offers enhanced compression and rebound damping compared to the Original Equipment-style air adjustable shocks. This provides a controlled yet plush ride with much less bottoming. Larger chambers (40mm diameter pistons and 14mm rods) allow these shocks to react more quickly to impacts. This keeps the tires tracking while minimizing harshness transmitted through the frame. A simple knob behind the left saddlebag allows the rider to conveniently modify the spring preload via a hydraulic adjuster. Available in Standard Ride Height and Low Ride Height versions.

54000008 Standard-Height. $584.95 Fits ’09-’16 Touring models (except models equipped with lowered front ends).

1WARNING: Installation of any accessory suspension components may affect cornering clearance and jiffy stand operation. This could distract the rider, causing loss of control and death or serious injury.

2WARNING: The Profile Low Front Suspension cannot be used independently and must be used with the appropriate lowered rear suspension kit. Installation of any accessory suspension components may affect cornering clearance and jiffy stand operation. This could distract the rider, causing loss of control and death or serious injury.

Notice:

D. PREMIUM RIDE HAND-ADJUSTABLE TOURING SHOCKS – LOW*

Original Equipment on the Ultra Limited® Low model, this low-profile rear suspension system is engineered to minimize ride height while maximizing comfort for the rider and passenger. Featuring a single tube, nitrogen charged emulsion design, these shocks deliver enhanced compression and rebound damping for a controlled and comfortable ride with much less bottoming. The shocks feature large chambers that allow the suspension to react quickly to impacts, keeping the tires tracking while minimizing harshness transmitted through the frame. A simple knob behind the left saddlebag permits adjustment of the spring preload to adapt for light or heavy load. Installation of this low profile rear suspension reduces seat height by .75" to deliver a confidence-inspiring shorter reach to the ground. Kit includes left and right rear shocks.

54000159 $584.95

Fits ’17-'25 FLHR, FLHRC, FLHTCU, FLHTK, FLHTKSE, FLHXST, FLTRK, FLTRKSE, FLTRU and FLTRXST models.

E. PROFILE® LOW TOURING AIR SHOCKS*

Lower the seat height of your Touring model without compromising the ride. The Profile Low Touring Shocks have been re-valved for a comfortable ride while lowering the seat height by up to .75". The kit maintains the air adjustability feature of the stock shocks.

54635-09

$331.95

Fits ’09-’16 Touring models. Does not lower ’09-’16 FLHX, FLHXS, FLTRX, FLTRXS, FLHTCUL, FLHTKL, FLHRSE, FLTRSE and FLTRXSE models. Does not fit Trike models.

F. ANALOG TOURING SUSPENSION AIR PUMP Aluminum housing is compact, lightweight and durable, and fits easily into your bag for on-the-road adjustments. The highquality 0-60 psi gauge ensures accurate air pressure.

54630-03A $69.95 For use with Touring air suspension components.

WARNING: Installation of any accessory suspension components may affect cornering clearance and jiffy stand operation. This could distract the rider, causing loss of control and death or serious injury.

208 TOURING & TRIKE

A. LOWER FORK SLIDERS – CHROME

Competitively priced, these chrome-plated Lower Fork Sliders give your bike upfront style. To ensure proper fitment and function, these sliders are manufactured from Original Equipment components. A perfect addition during the installation of Premium Ride or Profile® Low Front suspension components, the kit features polished, triple chrome-plating.

45500171

$599.95

Fits ’14-'25 Touring models (except ’23-Later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’24 FLTRXSTSE and ’25-later FLHXU models). Does not fit Trike.

45500200

Fits ’14-'25Trike models.

45500167

Fits ’00-’13 Touring models.

B. LOWER FORK SLIDERS – GLOSS BLACK

$599.95

$599.95

These gloss black coated sliders are the ultimate extension of your bike’s “dark side” and make a perfect custom addition to your blacked-out ride. Manufactured to Original Equipment specifications, the durable black coating is a great match to other H-D® black components. A perfect addition during the installation of Premium Ride or Profile Low front suspension components, this includes right and left sliders.

45500172B

$599.95

Fits ’14-'25 Touring models (except ’23-Later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’24 FLTRXSTSE and ’25-later FLHXU models). Does not fit Trike.

C. FULL CHROME FRONT END – CONVENTIONAL FORKS

The front forks on a Harley-Davidson® motorcycle set the tone for the bike and can lead the way to a full-bore custom statement. This complete kit makes it easy to start customizing by adding chrome where it will have the most noticeable impact on the overall look of the bike: your front end. Package includes components necessary to completely chrome the front forks including Chrome Fork Sliders, Chrome Upper Fork Slider Covers, Fork Slider Drain Screw Kit, Fork Seals, and Chrome Front Axle Nut Cover Kit.

45800161

$749.95

Fits ’24-later FLHX and FLTRX, 25-later FLHXU and '26-later FLHXL and FLTRXL. Does not fit CVO™ models. Not compatible with inverted forks.

TOURING & TRIKE 209

Front Forks D. FRONT END KIT – CHROME The front forks on a Harley-Davidson® motorcycle set the tone for the bike, and can lead the way to a full-bore custom statement. So start customizing by adding chrome where it will have the most noticeable impact on

45800037

(kit components vary depending on model).

$749.95 Fits ’14-'25 Touring models. (except ’23-Later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’24 FLTRXSTSE and ’25-later FLHXU models).

E. FRONT END KIT – GLOSS BLACK Lead the way to the dark side. This complete blacked-out Front End Kit includes all the major components required to convert the Original Equipment satin-finished front end to a dark custom style. A perfect addition during the installation of Premium Ride or Profile Low Front suspension components. This package includes Gloss Black Fork Sliders, Gloss Black Upper Fork Slider Covers, Gloss Black Front Axle Nut Covers and Gloss Black Outer Fairing Skirt.

45800038B

$749.95

Fits ’14-'25 Touring models (except Road King®, Road Glide® and ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU models). Does not fit Trike models.

F. UPPER FORK SLIDER COVERS – CHROME Brilliant chrome accents for the upper fork legs. Perfect for finishing off that chromed front end look. When used with H-D® Genuine Motor Accessory Chrome Lower Fork Sliders, you’ve got a front end that’s completely chromed and an appearance that’s utterly impressive.

45600022 $100.95

Fits '14-later Touring (except '23-later FLHXSE, FLTRXSE, '24later FLHX, FLTRX and FLTRXSTSE and '25-later FLHXU, FLTRXRRSE and '26-later FLHXLSE and FLHXSTSE) and Trike models.

45963-97

$84.95 Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF (except ’07), FLSTFB, FLSTFBS and FLSTN and ’80-’13 Touring and Trike models. Stock on FLSTNSE and FLSTSE models.

G. UPPER FORK SLIDER COVERS – GLOSS BLACK The classic Harley-Davidson motorcycle color is black. It shows your attitude, your feelings and your desire to be different from the rest. These gloss black accessories are the ultimate extension of the Harley-Davidson philosophy. Manufactured from Original Equipment components, these parts provide superior fit and finish.

45600023

$100.95

Fits '14-later Touring (except '23-later FLHXSE, FLTRXSE, '24later FLHX, FLTRX and FLTRXSTSE and '25-later FLHXU, FLTRXRRSE and '26-later FLHXLSE and FLHXSTSE) and Trike models.

45591-02

$84.95

Fits ’49-’84 FL, ’86-’17 FLS, FLSS, FLST, FLSTC, FLSTF (except ’07), FLSTFB, FLSTFBS, FLSTNSE and FLSTN, ’10-’12 FLSTSE and ’80-’13 Touring and Trike models.

H. TIE-DOWN BRACKETS

Simplify the process of securing your bike to a trailer or bike lift. These stylish black Tie-Down Brackets mount cleanly to the front fork cover and offer a secure method to connect tiedown straps. Moving the tie-down point from the handlebar to the triple-tree area reduces wear on the handlebar bushings and ensures a consistent easy-to-access mounting point. Includes mounting hardware.

Fits '23-later FLHXSE, '24-later FLHX, '25-later FLHXU and '26-later FLHXL, FLHXLSE and FLHXSTSE models

93500036 Black. $94.95

93500033 Chrome. $94.95

Fits '14-'24 Touring models (except Road Glide, Road King, ‘23-later FLHXSE and ‘24-later FLHX). Does not fit Trike models.

93500030 Black. $83.95

210 TOURING & TRIKE

A. FRONT FORK AIR BAFFLE – CHROME

Deflect the cold night wind rushing between the fork tubes of your Touring model. This stylish chrome air baffle replaces the Original Equipment black baffle on ’00-earlier models. Includes chrome mounting hardware.

58520-79TC

Fits ’80-’13 FLHR, FLHT, FLHX and FLT models. Does not fit Trike models.

B. BRAKE CALIPER KIT – RED

$44.95

Dress your bike in the latest high-performance look. Brilliant red calipers make a powerful visual statement, and set your bike apart from the ordinary. Manufactured from Original Equipment components for proven performance, these calipers will add a stylish touch to the stock bike, or add the perfect finish to a complete custom equipped with chrome or blacked-out wheels, rotors and fork sliders.

41300116 Front – Dual Disc.

$549.95

Fits '06-'17 VRSC™, '08-later Touring (except '23-later Touring CVO™ models, FLHXSE, FLTRXSE and '24 FLTRXSTSE and '25-later FLTRXRRSE) and '09-'13 and '19later Trike models. Brake pads sold separately. Does not fit models equipped with Ohlins inverted forks.

C. BRAKE CALIPER KIT – CHROME

Add the shine of chrome to your bike with these highly polished Chrome Brake Caliper Kits. Manufactured from Original Equipment components for proven performance, these calipers are a great addition to the stock bike, or add the finishing touch to a complete custom equipped with chrome wheels, rotors and fork sliders.

42012-06A Front – Dual Disc.

$949.95

Fits '06-'17 VRSC, '08-later Touring (except '23-later Touring CVO, FLHXSE, FLTRXSE and '24 FLTRXSTSE and '25-later FLTRXRRSE) and '09-'13 and '19-later Trike models. Brake pads sold separately. Does not fit models equipped with Ohlins inverted forks.

D. CALIPER SCREEN INSERT – CHROME

These chrome-plated Caliper Inserts replace the Original Equipment satin-finish screens featured on Brembo® brake calipers. Easy pop-in installation. Sold individually.

42054-05 Front.

Fits ’18-later Softail®, ’17-’25 Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE) and ’04-’22 XL models.

$36.95

E. CALIPER SCREEN INSERT – GLOSS BLACK

Complete the blacked-out transformation. Gloss black inserts replace the satin-finish screens featured on Harley-Davidson® Original Equipment Brembo® brakes, and add a rich complement to the wrinkle black caliper finish. Easy pop-in installation. Sold individually.

41300154 Front. $36.95

Fits ’18-later Softail®, ’17-’25 Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and ’04-’22 XL models.

G. FRONT WHEEL SPACERS – GLOSS BLACK It is all in the details. Complete your total front end with these wheel spacers in gloss black. Manufactured to the Original Equipment tolerances, they deliver the exact fitment and custom shine.

42400016 Domed. $57.95 Fits ’08-later Touring models with ABS brakes.

212 TOURING & TRIKE

Front Axle Nut Covers

A. FRONT AXLE NUT COVERS

Cover the front axle in style. This smooth custom die-cast Axle Nut Covers add the finishing detail to complete a custom front end. Easy to install spring clip mounting. Sold in pairs.

Fits '26-later Touring models, ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU models.

43000314 Gloss Black. $49.95

43000315 Chrome. $49.95

B. WILLIE G SKULL FRONT AXLE NUT COVERS

Cover the front axle in style with the famous Skull design penned at the hand of Willie G. This custom die-cast Axle Nut Covers add the finishing detail to complete a custom front end. Easy to install spring clip mounting. Sold in pairs.

Fits '26-later Touring models, ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU models.

43000317 Gloss Black. $59.95

43000318 Chrome. $59.95

FRONT AXLE NUT COVERS

Cover the front axle in style. Available in your choice of styles, these custom Axle Nut Covers look great with Original Equipment satin-finish fork sliders or add the finishing touch to a complete chrome or blacked-out front end. Easy to install kits include all necessary mounting hardware. Sold in pairs.

Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25 Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20-later FXLRS, ’19-later FXDRS and ’18-later FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159.

C. DOMINION™ COLLECTION FRONT AXLE NUT COVERS

Express your bold, renegade attitude. The machined aluminum Dominion Collection Front Axle Nut Covers add style to the front of the bike and are the perfect complement to other Dominion Collection accessories.

43000124 Gloss Black. $74.95

D. MACHINE CUT

TOURING & TRIKE 213

Front Axle Nut Covers FRONT AXLE NUT COVERS Fits ’02-’11 VRSC™ (except VRSCF and VRSCR), ’15-later XG, ’08-later XL, ’08-’17 Dyna®, ’07-later Softail® (except Springer™, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and ’08-’25Touring (except ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike models. ’18-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS, FXLR and FXST models require separate purchase of Front Axle Adapter Kit P/N 43000090. ’22-later FXLRST, ’20later FXLRS, ’19-later FXDRS and ’18-later FXFB and FXFBS models require separate purchase of Front Axle Adapter Kit P/N 43000159.

G. ALUMINATOR® FRONT AXLE NUT COVERS Chrome-plated billet aluminum axle covers feature a classic Bar & Shield logo insert. Includes all necessary mounting hardware for easy installation. 44114-07 $59.95

H. H-D MOTOR CO. LOGO FRONT AXLE NUT

’04-’07 Dyna (except ’07 FXDSE and ’04-’05 FXDWG) and ’00-’07 Touring models.

43061-04 Chrome – Billet. $54.95

L. H-D MOTOR CO. LOGO FRONT AXLE NUT COVERS 43063-04 $39.95 Fits ’04-’07 Dyna (except ’07 FXDSE and ’04-’05 FXDWG) and ’00-’07 Touring models.

43864-96 $39.95 Fits ’88-’07 XL, ’91-’03 FXD, FXDX, FXDXT, FXDL, FXDSCONV, ’93-’05 FXDWG, ’88-’07 FXR, ’87-later FLXR, FXRS-SP and FXWG, ’84-’06 Softail (except Springer and FXSTD) and ’80-’99 Touring models.

214 TOURING & TRIKE

Chassis Trim

A. OIL COOLER COVER

Dress the Touring oil cooler in style. This Oil Cooler Cover is designed to hug the contours of the cooler body and does not interfere with the engine guard or voltage regulator. The forward-facing mesh screen adds a custom touch, and protects the oil cooler fins from road debris without disturbing the airflow across the surface. Available in your choice of chrome or gloss black finish, the easy-to-install cover kit includes all required mounting hardware.

Fits ’17-'25 FLHR, FLHRC, FLHT, FLHX, FLHXS, FLHXST, FLTRX, FLTRXS and FLTRXST models. Does not fit models equipped with fairing lowers. Does not fit with Fan-Assisted Oil Cooler P/N 62700204 or Bolt-On Oil Cooler Fan P/N 26800195. Does not fit ’24-later FLHX and FLTRX models.

25700633 Chrome. $160.95

25700634 Gloss Black. $160.95 Fits ’11-’16 Touring and Trike models (except models equipped with Twin-Cooled™ engines).

63121-11A

$89.95

B. CENTER-COOLED MILWAUKEE-EIGHT ® RADIATOR GUARD

Rugged and beautiful protection for your radiator. This aluminum Radiator Guard is designed to protect the Center-Cooled Milwaukee-Eight radiator from road debris which could cause an unwanted radiator repair. Formed of bright aluminum. Does not impede air flow to the radiator. Factory-integrated design ensures a perfect fit and easy installation. Mesh design adds rugged style to the bike.

57300493

$174.95

Fits '23-later Touring models with Center-Cooled MilwaukeeEight engines except models with fairing lowers.

C. FORGED CARBON FIBER CONSOLE

Forged Carbon Fiber accessories are lightweight and give your bike an exciting new performance look. Each component is formed of chopped carbon fibers infused with resin in a compression mold under high pressure. There is no distinct pattern as the fibers are oriented entirely randomly, so each finished Forged Carbon Fiber part is unique. Complements other lightweight Forged Carbon Fiber accessories, including Screamin’ Eagle® Extreme Flow Titanium Slip-On Mufflers.

70901157

$399.95

Fits '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE, '25-later FLHXU and '26-later FLHXL and FLHXLSE models.

D. FORGED CARBON FIBER SEAT COWL

Forged Carbon Fiber accessories are lightweight and give your bike an exciting new performance look. Each component is formed of chopped carbon fibers infused with resin in a compression mold under high pressure. There is no distinct pattern as the fibers are oriented entirely randomly, so each finished Forged Carbon Fiber part is unique. Complements other lightweight Forged Carbon Fiber accessories, including Screamin’ Eagle Extreme Flow Titanium Slip-On Mufflers. For use with solo seat configurations (or pillion removal required).

61301374

TOURING & TRIKE 215

models (except FLI), ’23-later FLTRXSE and FLHXSE, and ’24-later Touring (except FLTRK and FLHTK).

H. CUSTOM REAR FENDER SYSTEM – PRIMED This custom rear fascia and fender kit keeps the back of your bike clean, classy and simple. Originally featured on CVO™ Touring models, this kit smoothly blends the shape of the rear fender into the saddlebags and hides the saddlebag mounting structure.

Fits ’14-'25 Touring models (except FLHRC

$499.95

Fits ’23-later FLHXSE, FLTRXSE and ’24-later FLTRXSTSE models. Fits ’24-later FLHX and FLTRX models with separate purchase of 2x P/N 10400077 and 10400048 pillion thumb screws and separate purchase of solo seat P/N 52000630, 52000627, 52000768 and 52000715.

E. FORGED CARBON FIBER FRONT FENDER

Forged Carbon Fiber accessories are lightweight and give your bike an exciting new performance look. Each component is formed of chopped carbon fibers infused with resin in a compression mold under high pressure. There is no distinct pattern as the fibers are oriented entirely randomly, so each finished Forged Carbon Fiber part is unique. Complements other lightweight Forged Carbon Fiber accessories, including Screamin’ Eagle Extreme Flow Titanium Slip-On Mufflers. 58900630

$599.95

Fits '23-later FLHXSE, FLTRXSE, '24-later FLTRXSTSE and '26-later FLHXLSE, FLHXSE and FLHXSTSE models.

216 TOURING & TRIKE

Headlamp & Fender Trim

A. TIE-DOWN BRACKETS — CHROME

Simplify the process of securing your bike to a trailer or bike lift. These stylish chrome Tie-Down Brackets mount cleanly to the front fork cover and offer a secure method to connect tiedown straps. Moving the tie-down point from the handlebar to the triple-tree area reduces wear on the handlebar bushings and ensures a consistent easy-to-access mounting point. Just add Harley-Davidson® Ratchet Straps and Soft Hooks and you’re ready to go.

93500011

$83.95

Fits ’14-'25 Touring models (except Road Glide®, Road King®, ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU). Does not fit Trike models.

93500006

$83.95

Fits ’02-’17 FLS, FLSS, FLSTC, FLSTF, FLSTFB and FLSTFBS, ’95-later FLHR, FLHRC and FLHRXS, ’95-’13 FLHT, FLHTC and FLHX, ’10-’13 FLHTCU and FLHTK, ’10-’12 FLHXSE and ’09-’12 FLHTCUSE. FLS, FLSS, FLSTF, FLSTFB and FLSTFBS models without a windshield require separate purchase of Hardware Kit P/N 91800030.

B. OUTER FAIRING SKIRT – GLOSS BLACK

Add a sinister touch to your batwing fairing. This classic gloss black skirt replaces the Original Equipment chrome or colormatched trim below the headlamp. The black skirt visually slims the fairing, and is the ideal finishing element on a blacked-out bike. Manufactured from Original Equipment components for superior fit and finish.

57100227

$164.95

Fits ’14-'25 Electra Glide®, Street Glide® and Ultra Limited® models. Does not fit ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU models.

46559-03

$139.95 Fits ’00-’13 FLHT, FLHTC, FLHTCU, FLHTK and FLHX models. Does not fit Trike models.

C. ROAD GLIDE® FAIRING SUPPORT KIT – GLOSS BLACK

Take your Road Glide motorcycle in a different direction. Easyto-install Fairing Mount replaces the Original Equipment chrome edition, and forms a seamless gloss black transition between a black engine guard and a dark color fairing. Kit includes gloss black left and right fairing support and matching engine guard clamps.

47200278

$186.95

Fits ’15-'25 Road Glide models. Does not fit ’23-later FLTRXSE and ’24-later FLTRX and FLTRXSTSE models.

49000274 $199.95 Rushmore Road Glide Fairing Support Kit

D. FRONT FENDER TRIM

Add a sweeping dash of chrome to the front fender. Chromeplated tapered spear features a stepped design that accentuates the flowing fender lines. Self-adhesive backing simplifies installation.

14100618 $54.95

Fits ’12-’16 FLD, ’86-’17 FL Softail® (except FLSTSB), ’18-later Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike models.

E. BAR & SHIELD LOGO FRONT FENDER SPEAR

This chrome-plated trim spear adds a sweeping dash of chrome to the front fender. Featuring a raised Bar & Shield logo set against a textured black field, this self-adhesive medallion is easy to install.

91195-04 Large. $54.95

Fits ’12-’16 FLD, ’86-’17 FL Softail (except FLSTSB), ’18-later Softail FLDE, FLHC and FLHCS, ’84-later Touring and Trike models.

218 TOURING & TRIKE

A. GAUGE TRIM KIT – CHROME

A touch of chrome makes all the difference. These classic gauge bezels take just a few minutes to install, and add the beauty of chrome to your dash. Trim rings are formed to the gauge shapes and feature peel-and-stick adhesive backing for permanent installation. No back plate is required for installation. The 4-piece kit includes two large and two small gauge bezels.

61400451

$95.95

Fits ’14-'25 Electra Glide®, Street Glide®, Ultra Limited® and Tri-Glide® Models. Fits with ’18-later CVO™ backplate. Does not fit with Gauge Trim P/N 61400328. Does not fit ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU models.

B. CHROME INSTRUMENT BEZELS

A touch of chrome makes all the difference. These bezel covers take just seconds to install and add the beauty of chrome to your dash. Available to fit all the fairing-mount gauges, these easy-to-install, chrome-plated formed rings feature peel-andstick adhesive backing for permanent installation.

Radio and Gauge Faceplate Trim

74612-06

Fits ’96-’13 Electra Glide, Street Glide and Trike models.

$32.95

C. INNER FAIRING TRIM – CARBON FIBER DESIGN

Transform the look of the inner fairing with this easy-toinstall fairing trim accents. These self-adhesive components add a contrasting look to the expanse of satin black or colormatched surface in front of you. The 5-piece kit includes media storage door trim, left panel trim and 3-piece switch panel trim. The Gauge Trim surrounds the instrument cluster for added depth and dimension.

Fits ’14-'25 Electra Glide, Street Glide, Ultra Limited and Tri Glide models. Does not fit ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU models.

61400328 Gauge Trim. $78.95

D. GLOSS BLACK CONSOLE KIT

Lead the way to the dark side. This blacked-out Console Kit includes the major components required to change the chrome console to a dark custom look. Manufactured from Original Equipment components for superior fit and finish, the kit includes black console, gasket and hardware. Available for models with or without 7-pin DIN headset connector. Add your choice of Fuel Door (sold separately) to set your bike apart from the crowd.

Fits’08-'25 Electra Glide, Street Glide, Ultra Limited, Road Glide and Tri Glide models with center fill tank. Does not fit ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU models.

70900463 Without CB Communications Port. $319.95

E. FUEL TANK CONSOLE DOOR – GLOSS BLACK The gloss black fuel door is the perfect match for the Gloss Black Console Kit. The easy-to-install fuel door replaces the stock door, and reuses Original Equipment mounting hardware.

70900465A $49.95

Fits’08-'25 Electra Glide, Street Glide, Ultra Limited, Road Glide and Tri Glide models with center fill tank. Does not fit ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE models.

F. PUSH-BUTTON FUEL TANK CONSOLE DOOR RELEASE

An added convenience you’ll appreciate at fuel stops. This lockable replacement for your stock fuel tank console door lock allows the door to be opened without a key by depressing the center button of the lock. For basic security, it can be locked with any barrel key.

53842-00C $39.95

Fits ’92-'25 Electra Glide, Street Glide, Ultra Limited, Tour Glide™, Road Glide and Tri Glide models with center fill tank (except FLHX, FLHXSE, FLHXU, FLTRX, FLTRXSE and FLTRXSTSE).

TOURING & TRIKE 219

220 TOURING & TRIKE

Tour-Pak® Trim

A. TOUR-PAK® HINGE AND LATCH KIT – GLOSS BLACK

Upgrade the appearance of your Tour-Pak luggage. These Original Equipment-style hinges and latch are polished and finished in rich gloss black. The complete kit includes hinges, latch and all necessary hardware.

53000343 $224.95

Fits ’14-later Touring and Tri Glide® models equipped with Chopped or King Tour-Pak Luggage. Also fits '26 limited models equipped with Grand Tour-Pak Luggage.

B. PREMIUM TOUR-PAK LATCHES

Styled to complement the Premium Tour-Pak Hinges, these die-cast latches provide a bold look to your ride. Designed to eliminate the traditional catch and clamp design, these latches make access to the Tour-Pak luggage easier than ever. Simply press down on the top of the lid to secure the latching mechanism. The self-aligning design positions the lid perfectly for no-fuss closure. A simple push of the button releases the lock and pops the lid open for convenience. Latches feature hidden hardware for a clean appearance and the front latch wraps around the Original Equipment lock for a custom touch. Kit includes front and rear latch and all mounting hardware.

Fits ’06-’13 Touring and Trike models equipped with King or Ultra Tour-Pak Luggage. Does not fit with Leather, Razor-Pak or Chopped Tour-Pak Luggage. Does not fit models equipped with Tour-Pak Lock Covers P/N 53000217 or 53000218. 53000252 Chrome. $118.95

C. PREMIUM TOUR-PAK HINGES

Upgrade the appearance of your Tour-Pak luggage with billetstyle premium hinges. Styled to complement the Original Equipment Tour-Pak latches, these hinges add a clean, bold look with no exposed hardware. Available in mirror chrome or gloss black finish, the complete kit includes two hinges and all necessary hardware. Drill is required to remove the factory installed hinge mounting rivets.

Fits ’88-’13 Touring and Trike models equipped with

Chopped or King Tour Pak luggage.

D. TOUR-PAK LATCHES – GLOSS BLACK

Add a custom touch to your Tour-Pak luggage. Styled to complement available gloss black Premium Tour-Pak Hinges, these Original Equipment-style latches are polished and finished in rich gloss black. The complete kit includes latches, hasps and all necessary hardware.

53000130 $49.95

Fits ’88-’13 Touring and Trike models equipped with RazorPak, Chopped or King Tour-Pak Luggage. E. RETRACTABLE TOUR-PAK LID TETHER

Add the convenience of a Retractable Tether to your TourPak luggage. When extended to its full length, the strong cord holds

TOURING & TRIKE 221

90200914

FLHX, FLTRX and FLTRXSTSE and ’25later FLHXU) equipped with hard saddlebags.

90201052 Latch Lever only. $79.95 Fits ’14-later Touring models (except FLHXSE, FLTRXSE and FLTRXSTSE) equipped with hard saddlebags.

G. SADDLEBAG FILLER STRIPS

For those who seek perfection, these kits fill in the gaps between the fender and the rear of the saddlebags, hiding the saddlebag mounting bracket. Choose between primed, highly polished chrome, or color-matched to your sheet metal and bags for a truly custom look.

Fits ’14-’24 Touring (except FLHRXS, FLHX, FLHXS, FLTRX, FLHXSE, FLTRXS and FLTRXSE) models with hard saddlebags. Does not fit with accessory Saddlebag Guard Rails.

90200872DH Solid – Vivid Black. $336.95

H. LOWER BELT GUARD COVER – CHROME Dress your lower belt guard in chrome. This polished and chrome-plated

222 TOURING & TRIKE

Rear Lighting

A. LED GRAND TOUR-PAK® LIGHTBAR

Signature LED Rear Lighting delivers modern style and function that improves your conspicuity to surrounding traffic. Designed for installation on a Grand Tour-Pak luggage carrier installed as an accessory. Matches the style and function of the Original Equipment rear lighting. Brilliant red LED brake and tail lighting adds conspicuity to surrounding traffic. Flushmount design for a clean, modern look.

69203678

$299.95

Fits '23-later Touring and '26-later Trike models equipped with Grand Tour-Pak Luggage. All models require separate purchase of Grand Tour-Pak Light Filler Strips. '23-'25 center cooled models requires separate purchase of wiring harness p/n 69203682.

B. GRAND TOUR-PAK LIGHT FILLER STRIPS - PRIMED

Quality primer finish ready for your custom paint application.

See a complete list of Color-Matched filler strips on page 655

53001093

$174.95

Required for installation of LED Grand Tour-Pak Brake/Tail Lamp Kit on Grand Tour-Pak luggage carrier.

C. SIGNATURE LED KING TOUR-PAK LUGGAGE RUN/ BRAKE/TURN LAMP KIT

Signature LED Rear Lighting delivers modern style and function that improves rider conspicuity to surrounding traffic. The light pipe around the perimeter diffuses light and is always illuminated as a running light for eye-catching visibility. Sequential turn signal elements sweep outward from the center to grab the attention of other motorists and make the motorcycle more conspicuous. LED Brake and Turn lights exceed the output of Original Equipment rear lighting. Easy plug-and-play installation requires no wiring splicing.

67801541 Red Lens. $349.95

Fits '23-'25 FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE and '25-later FLHXU models. Additional purchase of Electrical Connection Kit P/N 69203400 is required.

D. SIGNATURE LED KING TOUR-PAK LUGGAGE CARRIER RUN/BRAKE/TURN LAMP KIT

Sequential turn signal elements sweep outward from the center to grab the attention of other motorists and make the motorcycle more conspicuous. Offered with Smoked or Red lenses.

Fits '14-'25 models equipped with King Tour-Pak (except '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX, FLTRXSTSE, '25-later FLHXU, FLTRXRRSE and models equipped with CB antenna). For models with AM/FM Antenna, a separate purchase is required of Internal Hidden Antenna P/N 76000862 (except models already equipped with Hidden Antenna). Does not work with P/N 69203400.

67801129 Red Lens. $399.95

67801128

Notice: The prices appearing in this catalog are the manufacturer’s suggested retail prices. Actual retail prices may vary.

models.

H. TOUR-PAK® LUGGAGE AND SADDLEBAG INTERIOR LIGHT KIT

Don’t be left in the dark. This bright convenience lamp kit turns nighttime into day when you open your Tour-Pak luggage or saddlebag. A brilliant white LED light pod mounts inside the Tour-Pak luggage to illuminate the interior and the two available LED light pods mount to the bottom of the Tour-Pak luggage to cast light inside the open saddlebags. Each LED light pod features a soft-touch micro switch for ease of activation and a 5-minute auto shutoff timer to prevent battery drain.

1-Light Tour-Pak Light Kit

68000152 $104.95

Fits ’14-'25 Electra Glide® and Street Glide models (except ’23-later FLHXSE, ’24-later FLHX and ’25-later FLHXU) equipped with King Tour-Pak® luggage.

I. TRUNK INTERIOR LIGHT KIT Don’t be left in the dark. This bright convenience lamp kit turns nighttime into day when you open your Trike’s trunk. Two brilliant white LED light pods mount inside the trunk to illuminate the interior and the included contact switch turns the light on and off when you open and close the door. A 5-minute auto shut-off timer prevents battery drain. Kit includes wiring harness and installation hardware.

83946-11 Fits ’09-'25 FLHTCUTG models. $90.95 *WARNING: Disconnecting your DOT-required tail, brake and turn signal

224 TOURING & TRIKE

Electrical Accessories

A. VEHICLE HOLD CONTROL UPGRADE KIT

This kit enables the Vehicle Hold Control (VHC) feature, which applies and holds brake pressure when activated and prevents the motorcycle from rolling after the rider has released the brake controls. The primary function of VHC is to prevent the motorcycle from rolling when it is stopped and make it easier to ride away with confidence by minimizing the number of controls needed to pull away smoothly.

• Adds VHC to models equipped with Rider Safety Enhancements by Harley-Davidson (formerly known as RDRS)

• Prevents the motorcycle from rolling when it is stopped, for example at a stop sign on a hill, in stop-and-go traffic on a slope, or on a steep decline out of a parking structure

• The system applies brake pressure from the time the rider has released the brake controls until the rider actuates the throttle and clutch to pull away

• VHC is engaged and disengaged automatically, making it easier to maneuver the bike confidently

• VHC is not intended as a substitute for a parking brake in any situation

69203477

$69.95

Fits ’20-later Touring models equipped with RDRS and ’24later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU. Stock on ’23-later FLHXSE and FLTRXSE. Installation requires dealer Digital Technician update.

B. AUXILIARY POWER PORT – HANDLEBAR MOUNT

Power your cell phone, GPS, portable music player or tire inflator from this handy 12-volt power port. The elegant cast housing features a conventional style power outlet that accepts most 12V automotive power adapter plugs and a pop-top cover to protect the port while not in use.

Fits ’12-’17 Dyna®, ’11-’24 Softail® (except FXDRS, and FXFB and FXFBS models with stock tapered bars), and ’14-'25 Road King® models with 1-1/4" diameter handlebars. ’17-'25 Road

King requires separate purchase of Electrical Connection

Kit P/N 69201599A. ’18-’24 Softail models require separate purchase of Electrical Connection Kit P/N 69201750.

69200855 Chrome. $109.95

69200854 Black. $109.95

TOURING & TRIKE 225

AUXILIARY POWER PORT – SADDLEBAG MOUNT This convenient power port mounts to the inside wall of the saddlebag, allowing you to charge cell phones and music players in an out-of-sight location. Power port features a quickdisconnect plug for use with detachable saddlebags. 69200091

$48.95

Fits models equipped with 12-volt battery (except FXDRS, VRSC, XG models, or with Throw-Over or Swingarm Bags). Not for use with accessory Fitted Liners or Premier Liners. Requires separate purchase of Battery Charging Harness P/N 94624-97B, if not already equipped. Does not fit ’23 FLHXSE and FLTRXSE models.

226 TOURING & TRIKE

Electrical Accessories

A. AUXILIARY POWER SWITCH KIT – FAIRING MOUNT

Styled to match the Original Equipment fairing dash panel switches. These Auxiliary Power switches allow you to control additional fog lamps, auxiliary lighting, heated gear or electrical accessories with the touch of a finger. Kit includes two auxiliary switches, wire harnesses and installation hardware.

71400129

$149.95

Fits ’17-'25 Electra Glide®, Street Glide®, Road Glide®, Ultra Limited® and Tri Glide® (except ’24-later FLHX, FLTRX and FLTRXST and ’25-later FLHXU) models. Does not fit CVO™ models.

71400106

$84.95

Fits ’14-’16 Electra Glide, Ultra Limited, Road Glide Ultra and Tri Glide models.

71400105 $129.95

Fits ’14-’16 Road Glide, Street Glide and Ultra Limited models. Includes dash switch assembly mount.

B. ELECTRICAL CONNECTION UPDATE KIT – TOURING Harness plugs into accessory connector to provide 12-volt power leads. Required to install Heated Grips, XM Radio, Cruiser Amp & Speaker Systems, zu¯mo® GPS, Digital Oil Pressure Gauge, Garage Door Opener Kits, Heated Seats, decorative lighting or other electrical accessories.

69201599A

$39.95

Fits ’18-’24 Softail models and ’17-later Touring (except ’23later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike as a mid-bike connector (near the seat).

69200722

Fits ’14-’16 Touring and Trike models.

C. SWITCHED CIRCUIT ADAPTER HARNESS

$33.95

This harness allows two accessories to be connected to the switched accessory circuit featured on ’94-later Touring models. You then may switch two accessories on or off simultaneously as required.

70264-94A

$34.95

Fits ’94-'25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU) and Trike models. Required on ’14-later Touring and Trike models when connecting multiple powered accessories using Electrical Connection Kit P/N 69200722, 71400129, or 69201599A.

69201706

$28.95

Fits ’18-'25 Softail® and ’17-'25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE and ’25-later FLHXU) and Trike models. Required when connecting the CoolFlow™ Fan and another powered accessory using Electrical Connection Kit P/N 69201599A.

TOURING & TRIKE 227

Required for installation of CoolFlow fan P/N 26800242.

Also available: (not shown) 32-AMP HIGH-OUTPUT ALTERNATOR KIT Stock on all ’89-later carbureted 1340 models. 50% increase in amperage for the heavily accessorized motorcycle.

29985-87

$299.95

Fits ’84-’88 FLT, FLHT, and FXR (wet clutch) models. (Will not fit ’84-’88 Softail®.) Stock on all ’89-’95 and some ’96-’97 Evolution® 1340-equipped models.

F. ELECTRICAL Y-CABLE ADAPTER HARNESS

Required when running speaker audio configurations for six or more speakers and/or rear-ward lighting accessories.

69203682

$54.95 Fits '23-25 Touring models equipped with Skyline™ OS infotainment systems.

G. VOLTAGE REGULATOR – CHROME

Original Equipment voltage regulators with a sparkling tripleplated chrome finish. Hand-buffed, then copper-, nickel- and chrome-plated, these brilliant chrome-plated regulators are the perfect highlight for any Harley-Davidson® motorcycle.

74622-09

$279.95

Fits ’09-’16 Touring and Trike models (except ’14-later FLHRSE and FLHTKSE and ’15-later FLHXSE and FLTRUSE). 74622-06 Fits ’06-’08 Touring models. $279.95

228 TOURING & TRIKE

Chassis Trim – Trike

A. WHEEL CENTER COVER KIT

These chrome-plated hubcaps add style and depth to the Trike’s rear wheels. The snap-fit covers have no visible fasteners for a clean, custom look.

83841-09

$54.95

Fits '23-later FLTRT and '26-later FLHLT, FLHLTSE and FLTRT, '09-'25 FLHTCUTG, '10-'11 FLHXXX, and '15-'25 FLRT models.

B. TRUNK GUARD – CHROME

Unique rear guard wraps around the bodywork to protect your finish from damage. Lightweight steel tubing incorporates high-quality welded joints and is hand-polished and chromeplated for a brilliant finish. Kit includes all necessary mounting hardware for bolt-on installation.

49000294 Chrome. $349.95

Fits '26-later FLTRT models.

49000296 Chrome. $349.95

Fits '26-later FLHLT and FLHLTSE models.

83825-09C $349.95

Fits ’09-'25 FLHTCUTG and ’10-’11 FLHXXX models.

49000069A $349.95

Fits ’15-'25 FLRT and ’23-'25 FLTRT models.

C. TRUNK GUARD – BLACK

Unique rear guard wraps around the bodywork to protect your finish from damage.

TOURING & TRIKE 229

49000297

’14-later Road King®, ’14-’23 Road Glide®, Electra Glide®, Street Glide® and ’24 FLHTK and FLTRK. Does not fit models with leather-covered bags, or Speaker Lids. Not recommended for use on denim or aftermarket paint.

E. TOURING SIDE COVERS

11100078

$47.95

Fits '97-later Touring models and '24 FLHKT and FLTRK models. Not recommended for use on denim or aftermarket paint.

Also available FRONT FENDER 11100080 $47.95

Fits FLD, most FL Softail® bikes with full-sized fender, Touring (except '25-later FLTRXRRSE) and Trike models. Not recommended for use on denim or aftermarket paint.

F. TRANSPARENT PAINT GUARD KIT – TRIKE

This transparent skin is designed to protect parts of the Trike bodywork from boot scuffs and road debris. The crystalclear material protects the area surrounding the passenger footboard and is pre-cut to fit the leading and inner surface of the rear fender, the fascia panel of the trunk and the side covers. Scratches in the material can be “healed” by

SCREAMIN’ EAGLE®

232 SCREAMIN’ EAGLE®

STAGE UPGRADES: PATH TO PERFORMANCE

START HERE

STAGE I

Ideal for riders who want to enhance the performance, look and sound of their motorcycle

CHOOSE FROM BELOW

STAGE II

STAGE III

ADD EVEN MORE POWER

PUMP UP THE VOLUME

STAGE IV

• Most cost-effective step to improve performance and the foundation for future performance upgrades

• Match any Screamin’ Eagle® high-flow air cleaner and exhaust with the proper ECM calibration to increase the airflow into and out of the engine

TORQUE KIT: Ideal for riders looking for instant passing power at cruising speeds

POWER KIT: Ideal for riders who want to feel the power build and pull all the way to the redline

• Choose a TORQUE CAM or POWER CAM based on riding style

• A performance cam increases both the lift in the valve train (pushing the valve open farther) and the duration of the valve opening (how long the valve stays open)

Ideal for riders who want the largest engine displacement and increased power throughout the entire RPM range

Ideal for riders who want the absolute best Harley-Davidson performance upgrade available

• Highest-level performance upgrade available to provide a maximum increase in displacement, compression and flow

The rider will feel up to a 10%* increase in performance when compared to stock bikes throughout the entire RPM range

AN OVERVIEW OF WARRANTY & CAUTION: Harley-Davidson has the engineering expertise, sophisticated dyno lab and complete testing facilities to provide enthusiasts with a line of performance products designed to produce good, solid, reliable horsepower and torque. Engine-related performance parts are intended for the experienced rider only.

WARRANTY: Installation of Screamin’ Eagle products and similar off road or competition products could impact your H-D™ motorcycle limited warranty claims. Specifically, Harley-Davidson may exclude motorcycle limited warranty coverage for defects or damage caused by use of unauthorized parts, including defects or damage caused by use of non-Genuine Harley-Davidson® parts or use of the vehicle for racing or competition, and denial of coverage may be based on installation of parts designed for unauthorized uses of the vehicle, such as a trailer hitch. Additionally, Harley-Davidson shall exclude motorcycle limited warranty coverage and deny all motorcycle limited warranty claims for functional defects of powertrain components for any Harley-Davidson® motorcycle registered in the United States if the vehicle was tuned using a tuning product not covered by a California Air and Resources Board Executive Order or that was otherwise approved by the Environmental Protection Agency, or if Harley-Davidson or any authorized Harley-Davidson® dealer has any information to show that the vehicle was tuned using a tuning product not covered by a California Air and Resources Board Executive Order or that was

• TORQUE KIT: The rider will feel up to a 15%* increase in performance when compared to stock bikes in the low to mid RPM range

• Experience crisp throttle response and acceleration that can be felt at slower speeds, perfect for passing slow-moving vehicles without downshifting

• POWER KIT: The rider will feel up to a 25%* increase in performance when compared to stock bikes in the mid to upper RPM range

• Experience an adrenaline-pumping burst of speed while heading toward the redline

CAUTION ICONS GO LIGHT: These Screamin’ Eagle® products are 50-State U.S. EPA compliant for sale and use on all applicable vehicles, including those that are pollution controlled. See Genuine Motor Parts and Accessories or Screamin’ Eagle Accessories catalog for fitment information. Screamin’ Eagle Performance products are intended for the experienced rider only.

STOP HAND: Harley-Davidson motorcycles modified with some Screamin’ Eagle Performance products must not be used on public roads and, in some cases, may be restricted

rider only.

CAUTION: Harley-Davidson motorcycles modified with some Screamin’ Eagle high-performance engine parts must not be used on public roads and, in some cases, may be restricted to closedcourse competition.

• An increase in engine displacement allows the engine to swallow more air and fuel, while a higher-compression piston squeezes the air and fuel into a more volatile mixture, generating more power when ignited

• Displacement increases are accomplished with larger cylinders, matching pistons and the proper cam upgrade

• Higher-flowing CNC ported cylinder heads and larger bore throttle body increase the velocity and feed large volumes of air and fuel into the engine, which maximizes power on a larger displacement engine

• Combines ported cylinder heads and larger throttle body in combination with cylinders, matching pistons and proper cam upgrade

• Riders will experience a performance increase throughout the entire RPM range, with up to a 35%* increase when compared to stock bikes in the mid to upper RPM range

• Produces instant passing power without downshifting

• Delivers excellent stoplight to freeway speed and on-ramp acceleration

CALIFORNIA: These Screamin’ Eagle products are street compliant for sale and use on specific vehicles, outlined in the product’s fitment statement within the State of California. Screamin’ Eagle Performance products are intended for the experienced rider only..

CROSS FLAGS: This product may be intended for race use only applications. It may also be certified for use in a 50-State U.S. EPA compliant application or kit. Use of any incomplete combination of certified kit products may not be legal for sale or use on U.S. market pollutioncontrolled vehicles and may be restricted to closed course competition use. See Genuine Motor Parts and Accessories or Screamin’ Eagle Accessories catalog for compliance, fitment and warranty information. Screamin’ Eagle Performance products are intended for the experienced rider only.

The rider will feel exceptional acceleration, delivering significant gains and up to a 40%* increase when compared to stock bikes in the upper RPM range

DYNAMOMETER (DYNO) PERFORMANCE

and/or street-compliant statements refer to product meeting 50-state emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States. Not all products are available in all countries — please consult your dealer for details. *Dynamometer settings, motorcycle condition, variation, climate and other factors can affect performance output, and results can vary from the performance values declared by Harley-Davidson.

TUNING FOR PERFORMANCE

FIRST THINGS FIRST:

You’ve built your dream pavement-pounding machine by selecting one of the Screamin’ Eagle Stage upgrades.

START HERE

PRO STREET TUNER*

• Offers base calibrations for your chosen Screamin’ Eagle Stage upgrade

• Constantly monitors the engine operation in the Part-Throttle Cruising Range

• Enables manual adjustments to fine-tune parameters within part- and full-throttle ranges*

(*may not be available in all markets)

WANT MORE?

SMART TUNE PRO

• Uses the Pro Street Tuner base calibrations as a starting point

• Constantly monitors the engine operation and riding conditions in the Complete Motorcycle Operating Range

• Automatically adjusts tuning parameters in real time within the Complete Motorcycle Operating Range

Next, the motorcycle Engine Control Module (ECM) needs to be recalibrated. Screamin’ Eagle offers base calibrations specifically designed for the performance components on your bike.

THE HOW

THE WHAT THE BENEFIT

SCREAMIN’ EAGLE® 237

SCREAMIN’ EAGLE® PRO STREET TUNER

A. SCREAMIN’ EAGLE PRO STREET TUNER

Next generation performance tuning made even easier. Now with a wireless and wired option, the new Screamin’ Eagle Pro Street Tuner maximizes performance while being 49-state emissions compliant. The Screamin’ Eagle Pro Street Tuner is designed to simplify management of engine operating parameters as performance modifications are made. Once installed, the tuner allows you to adjust key parameters or simply upload the latest Engine Control Module (ECM) calibrations to match your bike’s state-of-tune. Start with a high-flow air cleaner and Street Performance mufflers and upload the calibration that provides the best performance mix. Add additional Stage upgrades later, and you simply upload the proper ECM calibration to match the model and hardware. With the all-new Screamin’ Eagle Street Tuner mobile app, you’ll have free online access to the latest factory calibrations via your smartphone. Ideal for real-world street performance applications, the Pro Street Tuner provides the adjustability to account for bike-tobike variation and when upgrading through various Stage kits, all while maintaining closed-loop fuel control for fuel economy in the part-throttle operating range. Unlike other aftermarket tuners, The Screamin’ Eagle Pro Street Tuner talks directly to your motorcycle’s ECM and re-programs the motorcycle’s operating system. The Pro Street Tuner discretely plugs into the bike’s data port, so no splicing or under-seat hardware is required. The Screamin’ Eagle Pro Street Tuner does not impact your Harley-Davidson® factory warranty coverage.

•Tune through Bluetooth® using the Screamin’ Eagle Street Tuner mobile app on your personal device. Screamin’ Eagle maintains a vast calibration library to ensure your performance calibration is plug and play

•Features a guided Smart Tune process to enable quick navigation through the software, whether new to tuning or an experienced user

•Smart Tune Live, a dynamic method to track engine data by running vehicle through a range of RPM and throttle positions, reduces time to modify existing Volumetric Efficiency tables (works on models with factory installed O2 sensors only)

•Compatible with Screamin’ Eagle Smart Tune Pro Automatic Tuning Module P/N 41000445A

•Stores run-time data, through phone’s memory, that can be downloaded to PC or viewed using the mobile app, allowing you to view and evaluate the bike’s air/fuel ratio,

The Screamin’ Eagle Pro Street Performance Tuner is designed to simplify management of engine operating parameters as performance modifications are made. Once installed, the kit allows you to adjust key parameters or simply upload the latest Engine Control Module (ECM) calibrations to match your bike’s state-oftune. Start with a high-flow air cleaner and Street Performance mufflers and upload the calibration that provides the best performance mix. Add additional Stage Upgrades later, and you simply upload the proper ECM calibration to match the model and hardware. Plus, you have free online access to the latest factory calibrations. Ideal for real-world street performance applications, the Pro Street Tuner provides the adjustability to account for bike-to-bike variation and for changes to cams, heads, intake and exhaust while maintaining closed-loop fuel control for fuel economy in the part-throttle operating range. Unlike other aftermarket tuners, The Screamin’ Eagle Pro Street Tuner actually talks directly to your motorcycle’s ECM and re-programs the motorcycle’s operating system. It isn’t a piggyback system that tries to fool the ECM into adding more fuel or changing the ignition timing. The Pro Street Tuner plugs into the bike’s data port, so no splicing or under-seat hardware is required. And unlike other race tuners or engine controllers, the Screamin’ Eagle Pro Street Tuner does not impact your Harley-Davidson® factory warranty coverage.

• Features a guided Smart Tune process to enable quick navigation through the software and permits tunability to optimize performance and drivability without compromising fuel efficiency, emission levels, engine durability, or 50-State U.S. EPA compliance

• Stores up to 15 minutes of run-time data that can be downloaded to PC, allowing you to view and evaluate the bike’s air/fuel ratio, O2 sensor readings, engine speed and temperature, RPM and vehicle speed, throttle position, spark advance and much more

• Vehicle Communications Interface (VCI) will record and display service codes for troubleshooting and diagnostics

• Smart Tune Live, a dynamic method to track engine data by running vehicle through a range of RPM and throttle positions, reduces time to modify existing Volumetric Efficiency tables (works on models with factory-installed O2 sensors only)

• Adjustability to Spark Advance, Throttle progressivity, and Volumetric Efficiency to custom tune the performance combination

• Includes the Vehicle Communications Interface (VCI) module and unlimited access to the latest software updates and calibrations available from Screamin’ Eagle. Screamin' Eagle Tuner Cable kits P/Ns 32184-08A, 41000018 and 41000979 available for seperate purchase. See h-d.com for model specific applications.

41000008C

O2 sensor readings, engine speed and temperature, RPM and vehicle speed, throttle position, spark advance and much more. Detailed changes can be made via the Pro Street Tuner desktop application

• Adjustability to Spark Advance, Throttle Progressivity, and Volumetric Efficiency to custom tune the performance combination. Throttle Progressivity adjustability available on select models. Requires Desktop application and Y-Cable to fine tune areas of calibration

• New performance widgets and features available within the Mobile App (Engine Head Temp, Battery Voltage, Throttle Position, Engine Speed, Speedometer, Tachometer, Manifold Absolute Pressure, etc.) to view live engine data as you tune

• View and clear diagnostics functions

• Includes the Bluetooth® Communications Interface (BCI) module and unlimited access to the latest software updates and calibrations available from Screamin’ Eagle

• Available Tuner Cable kit (P/N 41001142, sold separately) for computer connection for use in environments with poor Bluetooth connectivity, such as dyno rooms and to adjust specific parameters within calibrations

• 49-State U.S. EPA compliant

41001141A

$449.95

Fits '21-later Touring, Trike and Softail® models. Does not fit California models, ’21’24 California models instead require P/N 41001166A. The Screamin’ Eagle Pro Street Tuner mobile app supports both iOS version 15 and newer and Android version 11 and newer. 5

41001166A

$469.95

Fits ’21-’22 Touring, ’21-’22 Trike and ’21-’22 (except ’21-22 FXLRS and FXLRST) Softail California models only. Dealership installation only. Please see the What’s New section of the Screamin’ Eagle Street Tuner mobile app or PC software for the list of available calibrations. 6

SCREAMIN’ EAGLE PRO STREET TUNER - Y CABLE

Required to connect a Screamin’ Eagle Pro Street Tuner (P/N 41001141, sold separately) with ’21-Later models equipped with a Milwaukee-Eight® engine. 41001142 $99.95 For use with ’21-later Softail, Touring, and Trike models and the Screamin’ Eagle Pro Street Tuner P/N 41001141. Does not fit California models.

C. SCREAMIN’ EAGLE® SMART TUNE PRO

AUTOMATIC TUNING MODULE*

2

Smart Tune PRO works with the Screamin’ Eagle Pro Street Tuner to automatically adjust your bike for the combination of performance components, climates and vehicle load conditions you are operating in. You just install the upgraded wideband oxygen sensors in the exhaust headers, download the calibration that the Screamin’ Eagle engineers have developed as a starting point, then simply drive down the road and let Smart Tune PRO do the work.

Smart Tune PRO constantly monitors the operating parameters of your motorcycle, and automatically adjusts the bike’s Electronic Control Module (ECM) to maximize performance in your current riding conditions. Smart Tune PRO utilizes wideband O sensors that read oxygen levels in the exhaust stream to determine the optimum air/ fuel ratio your bike needs at this very moment. Smart Tune PRO analyzes the data and automatically makes real-time tuning adjustments to the ECM. Unlike the standard narrow-band O2 sensors that only provide feedback in the part-throttle cruising range, the wideband sensors can read and adjust tuning throughout the part throttle cruising and full-throttle acceleration operating range. It is fully factory supported, and optimized to maximize performance while maintaining drivability and engine longevity. Smart Tune PRO is 50-State EPA compliant and does not impact the H-D™ factory warranty. Kit includes the Smart Tune PRO module with plug-in wiring harness, two M18 wideband O sensors and access to free software updates, future calibrations and free online training modules. Screamin’ Eagle Pro Street Tuner and model-specific installation hardware is sold separately.

41000445A

$599.95

Fits ’14-‘22 XL, '16-'17 Dyna FXDLS, '16-later Softail, '14-later Touring (except '25later FLTRXRRSE) and '17-later Trike models. Does not fit ’21-later California models. Installation requires exhaust modification to incorporate wide-band oxygen sensors. Some models require Oxygen Sensor Harness Extension. For model specific installation

14900150

$368.95

For use with ’17-’20 XG, ’14-’22 XL and ’07-’17 Dyna®, and ’07-’22 Softail and Touring, and ’17-’22 Trike models. Requires separate purchase of model-specific Tuner Cable. Does not fit California ’21-later models. California models instead require P/N 41001212A. Refer to H-D.com/shop for status. 5

41001212A

$378.95

For use with ’17-’20 XG, ’14-’21 XL and ’07-’17 Dyna, and ’07-’22 Softail (except ’21-22 FXLRS and FXLRST), ’07-22 Touring and ’17-’22 Trike California models only. Requires separate purchase of model-specific Tuner Cable. Dealership installation only. Refer to H-D.com/shop for status. 6

69201704

$33.95

238 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage Upgrades

MILWAUKEE-EIGHT ® POWERTRAIN

Screamin’ Eagle Stage upgrades offer complete street-compliant performance configurations engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and trial-and-error testing normally associated with engine modifications, Stage upgrades include everything you need to enhance your bike’s performance. Start with the foundation, the Stage I upgrade, then choose from Stage ll, lll or lV depending on your performance goals, budget and riding style.

STAGE II

STAGE I + CAM UPGRADE

Adding performance cams to a Stage I equipped bike is the next step to improved performance. Cam choices allow you to tailor the engine’s performance to your specific needs. A torque cam offers on-demand throttle response from low- to mid-RPM at cruising speed. A power cam targets high-RPM, wide-open throttle response that keeps pulling right up to the redline. ECM calibration tuning is required to accommodate the increased valve timing, and performance valve springs may be required for high-lift cams.

Stage II upgrade requires minor engine disassembly to replace the cam. Adjustable pushrods allow cam installation without removing the rocker box. Special tools and ECM tuning are required.

STAGE III

STAGE I + CAM, BIG BORE CYLINDERS & PISTONS

The next step on the performance journey is to build a bigger engine. An increase in engine displacement allows the engine to swallow more air and fuel, a higher compression piston squeezes the air/fuel into a more volatile mixture, and when combined, generates more power when ignited. A displacement and compression increase provides torque increases throughout the entire RPM range with a 15-25% improvement in the mid-range power. ECM calibration tuning is required to adjust fuel flow and timing to accommodate the increased displacement.

Stage III bolt-on upgrade requires removal of the engine’s top end and opening the cam chest. Engine remains in the chassis and no machining is required. Special tools and ECM tuning are required.

STAGE IV

INTAKE + EXHAUST + TUNING

The easiest and most cost effective step to improve your motorcycle’s performance is to increase the airflow into and out of the engine. A high-flow air cleaner and system-matched slip-on mufflers provide horsepower and torque improvements you can feel throughout the RPM range, and serve as the core components for all performance upgrades. ECM calibration is required to tune the fuel flow and timing required to accommodate the improved airflow.

STAGE I + CAM, BIG BORE CYLINDERS, PISTONS, CYLINDER HEADS & THROTTLE BODY

To maximize the impact of the increased displacement gained with Stage III updates, the addition of free-flowing ported cylinder heads and a big bore throttle body top off the performance build. Designed to satisfy the high-RPM, throttle-twisting rider, the Stage IV update delivers 20-30% increase in power that keeps pulling right up to the redline, without sacrificing mid-range torque. ECM calibration tuning is required to add more fuel, and a higher-lift cam may be required to deliver maximum power.

Stage IV bolt-on upgrade requires removal of the engine’s top-end and opening the cam chest. Engine remains in the chassis and no machining is required. Special tools and ECM tuning are required.

SCREAMIN’ EAGLE® 239

Milwaukee-Eight® Stage Upgrades

240 SCREAMIN’ EAGLE®

242 SCREAMIN’ EAGLE®

244 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® HEAVY BREATHER EXTREME AIR CLEANER 2

Designed for maximum performance, this race inspired Screamin’ Eagle Heavy Breather Extreme Air Cleaner flows 20% more air than the Original Equipment air box. At speeds over 60 mph, the air cleaner experiences a ram-air effect. The all-new filter design captures air from the Extreme face, on the front of the air cleaner. The air then travels through the race inspired elbow followed by a straight shot into the throttle body. Designed to feed a large-displacement engine enough clean air that can support output of over 150hp. This air cleaner provides a stout increase in torque throughout the mid-range, as compared to other air cleaner designs. Waterresistant K&N oiled-cotton filter is washable and rechargeable using K&N Air Filter Care Service Kit P/N 99850-92T). Standard rain sock keeps water, dust and debris from contacting your air filter. Extra insurance when riding in the elements. 49-State U.S. EPA compliant.

Fits '23-later Center Cooled Touring models, ’25-later Softail models (except FXLRST) and '26-later Trike models. Does not fit models with lower fairings. Does not fit California models.

29400454 Black. $624.95

29400455

246 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage I Upgrade

A. SCREAMIN’ EAGLE® HEAVY BREATHER

EXTREME AIR CLEANER 2

We’ve taken the iconic Screamin’ Eagle Heavy Breather Air Cleaner to the next level–an extreme performance level. Designed for maximum performance, this extra-large Screamin’ Eagle Heavy Breather Extreme Air Filter flows 42% more air than a traditional Heavy Breather filter. Air moves smoothly through the filter due to an interior bell-shape feature and then travels through a unique round to oval transitioned tube to improve leg clearance while providing unobstructed air to the throttle body. At speeds over 60 mph, the filter captures air from the front, forcing the air through a smaller area to create a RAM air effect, while the long intake tube enhances torque beyond other Ventilator and Round High-Flow Filters for enhanced acceleration. Designed to feed a large displacement engine enough clean air that can support output of over 150hp. The cast aluminum intake tube and back plate are dressed in rich, gloss black or mirror-like chrome. The back plate features a Screamin’ Eagle logo. Kit includes all required mounting hardware. Optional Rain Sock P/N 29400424 is available to protect the exposed element in inclement weather.

Fits '18-'24 Softail®, '17-'25 Touring (except models equipped with Fairing Lowers and Center Cooled models). Also fits ’17-later Freewheeler models. Does not fit models equipped with Fairing Lower Glove Boxes, Fairing Lower Speakers or Road Glide Fairing Spoilers. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Pending approval for use in California on ’21 models. Refer to H-D.com/ shop for status. Does not fit Center Cooled models.

29400388 Chrome. $509.95

Fits California 18-22 Softail, ’17-22 Touring (except models equipped with Fairing Lowers) and 17-22 Freewheeler models. Does not fit models equipped with Fairing Lower Glove Boxes, Fairing Lower Speakers or Road Glide Fairing Spoilers. All models require ECM calibration with Screamin Eagle Pro Street Tuner for proper installation. 29400477 Chrome.

turbulence for increased power and torque, and the intake tube mounts to a custom back plate that features integral breathers and covers the throttle body electronics for a finished look. The slanted compact filter adds an aggressive performance look, and it is shaped to allow installation on Touring bikes equipped with fairing lowers. This Elite version includes an integrated cover manufactured from forged aluminum and precision machined to further enhance the stylized performance look while exposing a majority of the filter to maximize airflow. Available in your choice of chrome or gloss black finish, the kit includes filter, cover, intake tube, custom back plate, and all mounting hardware.

Fits ’18-’24 Softail® models and ’17-’25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24-'25 FLHX, FLTRX and ’25-later FLHXU) and Trike models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. Does not fit on models equipped with fairing lower glove boxes or fairing lower speakers. Pending approval for use in California on ’21-’22 models. Refer to H-D. com/shop for status.

29400406 Chrome. $599.95

29400407 Gloss Black. $599.95

Fits California 18-22 Softail models and 17-22 Touring and Trike models only. All models require ECM calibration with Screamin Eagle Pro Street Tuner for proper installation. Does not fit on models equipped with fairing lower glove boxes or fairing lower speakers.

29400480 Chrome. $624.95

29400481 Gloss Black. $624.95

Also available: SCREAMIN’ EAGLE HEAVY BREATHER ELITE AIR CLEANER - FILTER

K&N® replacement air filters are engineered to improve airflow for increased horsepower and quicker acceleration. K&N filters provide excellent filtration, and because they are washable and reusable, you can clean the filter whenever conditions demand. Designed as direct replacements for specified fitments.

29400405 $83.95 Fits ’18-’24 Softail and ’17-'25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’25-later FLHXU) and Trike models equipped with Heavy Breather Elite Air Cleaner P/N 29400406 or 29400407. Also fits models factory equipped with a Screamin’ Eagle Heavy Breather Elite Air Cleaner.

Also available: HEAVY BREATHER ELITE RAIN SOCK Protect your exposed-element air cleaner during inclement weather with this Screamin’ Eagle Heavy Breather Rain Sock. 29400512A $34.95 Fits Milwaukee-Eight models equipped with the Screamin’ Eagle Heavy Breather Elite Air Cleaner. Also fits ’22-’23 FLHXST and FLTRXST, and ’22-later FXLRS and FXLRST models that are factory equipped with the Heavy Breather Elite Air Cleaner.

248 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® VENTILATOR EXTREME AIR CLEANER 2

Let it breathe! The open-face filter design of the Screamin’ Eagle Ventilator Extreme Air Cleaner Kit flows 39% more air than a traditional perimeter high-flow filter. When combined with an additional 1/2" of air filter thickness and the smooth radius die-cast back plate, this open filter can feed a large displacement engine with an unobstructed flow of clean air that can support output of over 150hp. Kit includes a die-cast back plate, and open-face, water-resistant, washable oiledcotton filter element and all required installation gaskets and hardware. Optional Rain Sock P/N 29400412 is available to protect the exposed element in extreme weather. Choice of either Gloss Black (P/N 61300994) or Chrome (P/N 61300993) Cover Kit required to complete installation.

Fits ’18-’24 Softail® and ’17-’25 Touring (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’25-later FLHXU) and Trike models. Requires Ventilator Extreme Air Cleaner Cover Kit P/N 61300993 or 61300994 to complete installation. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. pending approval for use in California on 21-’22 models. Refer to H-D. com/shop for status.

29400396 Chrome. $249.95 29400397 Gloss Black. $249.95

Fits California 18-22

VENTILATOR EXTREME AIR CLEANER COVER The Ventilator Extreme Air Cleaner Cover trims the face of the Screamin’ Eagle Ventilator Extreme filter in style and features aggressive mounting lugs, polished stainless-steel custom ARP fasteners and an inset Screamin’

Pro Street Tuner for proper installation. ECE compliant on ’17-later CVO™ Touring models. Pending approval for use in California on ’21-’22 models. Refer to H-D. com/shop for status.

Chrome. $349.95

Gloss Black. $349.95

250 SCREAMIN’ EAGLE®

for extra insurance when riding in the elements. Save money over the long run-wash and re-oil this filter instead of buying replacement filters. The air cleaner includes the gloss-black finished die-cast back plate, an open-face washable oiled-cotton filter element, and all required installation gaskets and hardware. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. The air cleaner is 49-state U.S. EPA compliant. Screamin’ Eagle products are not available for sale and are not street legal in

FLTRXL, FLHLT and FLTRT models. Does not fit California models. ECE compliant. D.

another air filter. This washable and reusable performance air filter is specifically designed for increased air flow. Remove the miles of collected dust, dirt, and debris from the filter to reuse it trip after trip. It is factory engineered to be a perfect replacement and upgrade over the Original Equipment air filter. The air filter provides

252 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage I Upgrade

A. SCREAMIN’ EAGLE® ROUND EXTREME-FLOW AIR CLEANER – CENTER BOLT 2

Kit includes the gloss-black finished die-cast back plate with laser-engraved logo, an open-face washable oiled-cotton filter element, and all required installation gaskets and hardware. 50-State U.S. EPA compliant (except FLSB).

29400357 Extreme Open-Face Filter.

$249.95

Fits ’18-’24 Softail® and ’17-’25 Touring (except ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX, and FLTRXSTSE, and ’25-later FLHXU) and Trike models. ’17-’25 Touring and Trike models require separate purchase of accessory round air cleaner cover or trim. Not compatible with air cleaner cover on CVO™ Touring models. All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Pending approval for use in California on ’21 models. Refer to H-D.com/shop for status. Does not fit Center Cooled models.

29400475

$229.95

Fits California 18-22 Softail and ’17-22 Touring and Trike models. ’17-22 Touring and Trike models require separate purchase of accessory round air cleaner cover or trim. Not compatible with air cleaner cover on CVO Touring models. All models require ECM calibration with Screamin Eagle Pro Street Tuner for proper installation.

B. SCREAMIN’ EAGLE ROUND HIGH-FLOW AIR CLEANER – CENTER BOLT 2

This kit includes air cleaner element, gloss black back plate with laser-engraved Screaming Eagle logo, breather and all required hardware. Optional Rain Sock P/N 29400363 is available to protect the exposed element in inclement weather. 50-State U.S. EPA compliant.

29400355

$199.95

Fits ’18-’24 Softail and ’17-’25 Touring (except ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX, and FLTRXSTSE, and ’25-later FLHXU) and Trike models. ’17-’25 Touring and Trike models require separate purchase of accessory round air cleaner cover or trim. Not compatible with air cleaner cover on CVO Touring models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Pending approval for use in California on ’21 models. Refer to H-D.com/shop for status. Does not fit Center Cooled models.

29400473

$214.95

Fits California 18-22 Softail and ’17-22 Touring and Trike models. ’17-22 Touring and Trike models require separate purchase of accessory round air cleaner cover or trim. Not compatible with air cleaner cover on CVO Touring models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

C. SCREAMIN’ EAGLE ROUND HIGH-FLOW AIR CLEANER – PERIMETER BOLT 2

The kit includes the gloss-black finished die-cast back plate, a perimeter-flow washable oiled-cotton filter element, all required installation gaskets and hardware and a laserengraved Screamin’ Eagle logo to finish the look. 50 State U.S. EPA compliant.

29400356 $199.95

Fits ’18-’24 Softail and ’17-’25 Touring (except ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX, and FLTRXSTSE, and ’25-later FLHXU) and Trike models. ’17-’25 Touring and Trike models require separate purchase of accessory round air cleaner cover or trim. Not compatible with air cleaner cover on CVO Touring models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Pending approval for

SCREAMIN’ EAGLE® 255

256 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® EXTREME FLOW TITANIUM SLIP-ON MUFFLER 5

Realize a significant weight reduction and a deeper, more robust exhaust tone with this Screamin’ Eagle Extreme Flow Titanium muffler, designed specifically to fit on ’25-later Softail models. The Titanium muffler body construction with Forged Carbon Fiber end cap reduces overall weight by 20% compared to the Original Equipment exhaust. Matte black finish with laser etched Screamin’ Eagle logo. 49-state U.S. EPA compliant. Screamin’ Eagle products are not available for sale and are not street legal in all countries - Please contact your local dealer for more information.

Fits ’25-Later FXBB, FXLRS, FXLRST and FLHC models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. 64901405

B. SCREAMIN’ EAGLE STREET CANNON MUFFLERS – SPORT GLIDE® MODELS 2

Tuned to provide a deep bass exhaust note and great rumble throughout the RPM range, this 4.5" Street Cannon muffler delivers the famous Harley sound while preserving the peace with your neighbors. You get a nice bark when you get on the throttle, and a deep mellow tone when cruising at constant speed. The tuned baffle works with the internal high-flow catalyst to strike the perfect balance required to deliver performance that you can feel in your gut. The large 4.5" diameter Street Cannon provides free flow of exhaust gases with just the right amount of back pressure for a smooth-running ride and can be fitted with a wide variety of styled muffler end caps to provide the perfect finishing touch. Requires choice of chrome or satin black muffler shield with laser etched logo.

Designed for International markets that require ECE certified muffler s. Fits ’21-’24 FLSB models. Installation requires separate purchase of Muffler Shield, Muffler End Cap, Muffler Clamp P/N 65900007 (Qty 1) and Muffler Gasket P/N 65900040 (Qty 1).

64901191 Black, $799.95

Shown with: MUFFLER SHIELD

Styled to hug the lines of the uniquely shaped stepped muffler design of the Screamin’ Eagle Street Cannon for Sport Glide models. Offered in both chrome and satin black and feature a subtle engraved Screamin’ Eagle script for a clean look.

Fits ’18-’24 FLSB models equipped with Screamin’ Eagle Street Cannon Mufflers P/Ns 64900752, 64900754, 64900756, 64900758.

65400466 Chrome. $74.95 65400468

SCREAMIN’ EAGLE® 257

258 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage I Upgrade

A. SCREAMIN’ EAGLE® EXTREME FLOW TITANIUM SLIP-ON MUFFLERS 2

Realize a significant weight reduction and a deep, sporty exhaust tone with these Screamin’ Eagle Extreme Street Cannon mufflers, designed specifically to fit on ’17-later Touring models. These mufflers weigh 10% less than the Original Equipment (CVO™ models) 4.5” mufflers. The oval shape maintains the Original Equipment lean angle. The titanium mufflers and Forged Carbon Fiber end caps are both lightweight and durable. They have a matte black finish with laser etched Screamin’ Eagle logo and complement other lightweight Forged Carbon Fiber accessories. The mufflers are 49-state U.S. EPA compliant. Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

64901365 $1,274.95

Fits ’17-later Touring models. Does not fit Trike or California models. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

B. SCREAMIN’ EAGLE STREET CANNON PERFORMANCE SLIP-ON MUFFLERS – 4.5"

Dialed in to enhance the performance of the MilwaukeeEight® engine, these slip-on mufflers feature a large inlet for improved airflow. When teamed with a free-flowing air cleaner, these Street Cannon mufflers deliver horsepower and torque gains you can feel. The large 4.5" diameter mufflers are tuned to provide a rich exhaust note, a deep bass rumble and great throaty sound when you roll on the throttle. But to strike a balance with your neighbors, the large internal volume and strategically designed baffles help maintain the peace at partial throttle. The large-diameter body adds a muscular look to your ride, and the newly designed mounts keep the mufflers tucked in close to the bags for a clean profile and can be fitted with a wide variety of styled muffler end caps to provide the perfect finishing touch.

Fits ’17-’25 Touring models (except ’23-later FLHXSE, FLTRXSE models, ’24-later FLHX, FLTRX and ’25 FLHXU models). Does not fit Trike models. Installation requires separate purchase of Muffler Clamps P/N 65900012 and 65900015. Requires separate purchase of end caps. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. Pending approval for use in California on 21-’22 models. Refer to H-D.com/shop for status.

64900552A Chrome. $674.95

64900553B Satin Black. $674.95

Fits ’17- 20 114CI and 117CI Touring models. Does not fit Trike models. Designed for International markets that require ECE certified mufflers. Includes matching Two-piece Muffler end caps. Installation requires separate purchase of Muffler Clamps P/N 65900012 and 65900015.

64900555A

260 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® HIGH-FLOW EXHAUST SYSTEM WITH STREET CANNON MUFFLERS 5

The Screamin’ Eagle High-Flow Exhaust system provides bolton performance by reducing the catalyst restrictions and improving exhaust flow. This exhaust system is optimized for use with Screamin’ Eagle Stage Kit-equipped MilwaukeeEight® engines. The complete exhaust system starts with race-shop constructed oversized mandrel-bent and hand TIG-welded stainless steel head pipes, and flows through a unique crossover to improve the flow of spent cylinder gasses. The large inlet 4.5" Street Cannon mufflers feature baffles that are optimized for aggressive performance and sound under acceleration, and deliver a rich mellow note. The combination of tuned-flow headers and Street Cannon mufflers with relocated catalyst maximizes horsepower, maintains solid midrange torque and manages heat. The proof is in the horsepower and torque numbers. Dial the system to your motorcycle by using the Screamin’ Eagle Pro Street Tuner to tune your ECM specifically to match your performance upgrades. The complete system includes exhaust headers pre-tapped for standard or Screamin’ Eagle wide-band O2 sensors, large 4.5" diameter Street Cannon mufflers, and matching exhaust heat shields. Complete the look with your choice of custom muffler end caps (sold separately). This High-Flow Exhaust System is designed to pair with a 128CI or 131CI Stage IV Kit or Crate Engine to ensure maximum performance. 49-State U.S. EPA compliant. Refer to www.H-D.com/Shop for status.

Fits ’17-’25 Touring models (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX and ’25-later FLHXU models). Does not fit Trike models. Does not fit with Dominion™ Transmission Side Covers. Separate purchase of Screamin’ Eagle 4.5" endcaps required. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. See Dealer for details. Does not fit California models.

65600331 Chrome $1,749.95 with Chrome Mufflers.

65600332 Satin Black $1,849.95 with Satin Black Mufflers.

B. SATIN BLACK EXHAUST SHIELD KIT

These formed steel exhaust shields feature a unique black coating that complements the finish of the Screamin’ Eagle black slip-on mufflers. The rich black coating maintains its uniform black finish and has survived stringent HarleyDavidson testing for durability and corrosion resistance. Manufactured to Original Equipment standards for exacting fit, the easy-to-install kit includes front and rear head pipe shields. 65400285A $274.95 Fits ’17-later Touring and Trike models.

Milwaukee-Eight® Stage I Upgrade 5 5

NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, over-heating, etc. and is not caused by defective manufacturing.

Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The

262 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® STAGE II KIT 2

The high-performance SE8-511 camshaft profile, initially developed for the Milwaukee-Eight® 121 High Output engine, delivers a high-octane performance boost for 117ci models. Designed for the horsepower junkie in mind, this camshaft kit will build additional horsepower @ 4000 RPM and continues to build by up to 21% increase at redline.

• Ideal for high octane riders that consistently push their vehicle to the upper RPM range

• Produces greater acceleration in the mid and upper RPM range

• Includes adjustable pushrods that allow SE8-511 camshaft installation without removing the cylinder heads, significantly reducing installation time and cost

• Kit includes Screamin’ Eagle High-Capacity Lifters

• Black pushrod tubes to match Black engine finish

• Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

Fits '24-later FLHX, FLTRX and FLHXU models and '25-later Softail® models. Factory equipment on '24-later FLTRXSTSE and '26-later FLHXSTSE and FLTRXP and '25-later FXLR and FXLRST models. Does not fit California models. Does not fit VVT equipped models.

92500132 Black. $679.95

92500133 Chrome. $679.95

B. SCREAMIN’ EAGLE SE8-511 CAM 2

Same camshaft specifications as the Milwaukee-Eight 121 High Output engine camshaft. Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

25400476 $309.95

Fits '24-later FLHX, FLTRX and FLHXU models and '25-later Softail models. Factory equipment on '24-later FLTRXSTSE and '26-later FLHXSTSE and FLTRXP and '25-later FXLR and FXLRST models. Does not fit California models. Does not fit VVT equipped models.

SCREAMIN’ EAGLE® 263

Stage II Upgrade

C. SCREAMIN’ EAGLE® PREMIUM TAPERED QUICK-INSTALL ADJUSTABLE PUSHRODS 2

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher-lift cams. The one-piece chrome moly tube adds rigidity and durability and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. To simplify adjustment, the tube features six flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Kit includes 4 pushrods and required pushrod tube covers. Fits ’18-later Softail® and ’17-later Touring and Trike models. 17900073 With Black Covers. $329.95 17900058 With Chrome Covers. $314.95

D. SCREAMIN’ EAGLE PERFORMANCE VALVE SPRING KIT 2

These performance beehive-shaped valve springs provide increased stiffness and strength in a compact design. Designed to support the installation of higher lift cams, these performance springs help maintain the stability of the valve train in high RPM conditions. Complete kit includes 8 springs, upper collars and keepers and lower collars with integral valve seals. Recommended for use with cam lifts greater than .470". 18100080 $349.95 Fits ’18-later Softail and ’17-later Touring and Trike models.

264 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage II Upgrade

THE BASICS THE PERFORMANCE

• Choose a TORQUE CAM or POWER CAM based on riding style

• A p erformance cam increases both the lift in the valve train (pushing the valve open farther) and the duration of the valve opening (how long the valve stays open)

TORQUE KIT

• The rider will feel up to a 15% increase in performance in the low to mid RPM range

• Experience crisp throttle response and acceleration that can be felt at slower speeds, perfect for passing slow moving vehicles without downshifting POWER KIT

• The rider will feel up to a 25% increase in performance in the mid to upper RPM range

• E xperience an adrenaline-pumping burst of speed while heading toward the red line

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II – TORQUE KIT (CHROME COVERS SHOWN)

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® STAGE II – TORQUE KIT 2

This kit was developed for the budget-minded rider who wants to experience crisp throttle response and acceleration he or she can feel at slower speeds. The 5% increase in torque can be felt immediately off the line and continues to build by up to a 14% increase @ 4500 RPM – the ideal power band for passing slow-moving vehicles.

SE8-447 Cam

• Delivers enhanced torque and horsepower in the low to mid RPM range

• Produces passing power without a downshift or high revs

• Minimally invasive, only requiring opening of the cam chest Fits ’18-’24 Softail® and ’17-’25 Touring (except Center Cooled Models) and Trike models. Not intended for use on ’18-later CVO™ Touring and Trike models. Not intended for use on Touring and Softail Models equipped with an OE 117 Engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). All models require ECM calibration with Screamin’ Eagle® Pro Street Tuner for proper installation. See Dealer for details. Does not fit ’22 California models. Refer to H-D.com/shop for status.

92500047A Chrome Covers.

92500074A Gloss Black Covers.

$534.95

$564.95

6Fits '18-'24 California Softail and '17-'25 California Touring equipped with oil/air or twin cooled engines and '17-later California Trike models. Not intended for use on 18-later CVO models or models equipped with an OE 117ci engine. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

92500127 Chrome.

92500129 Gloss Black.

$564.95

$589.95

TORQUE POWER

B. SCREAMIN’ EAGLE MILWAUKEE-EIGHT STAGE II – POWER KIT (GLOSS BLACK COVERS SHOWN)

B. SCREAMIN’ EAGLE MILWAUKEE-EIGHT STAGE II – POWER KIT 2

This kit was developed for the budget-minded rider who wants to experience that adrenaline-pumping burst of speed while heading toward the red line. The additional power starts to build @ 3000 RPM and continues to build by up to 24% at redline. Riding the bike aggressively will require downshifting to lower gears to keep the engine operating in the higher RPM range.

SE8-462 Cam

• Ideal for riders looking for excitement and willing to ride in the upper RPM range

• Produces greater acceleration in the mid and upper RPM range

• Minimally invasive, only requiring opening of the cam chest

Fits ’18-’24 Softail and ’17-’25 Touring (except Center Cooled Models) models. Does not fit Trike models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. See Dealer for details. Does not fit ’22 California models. Refer to H-D.com/shop for status.

92500058A Chrome Covers. $534.95

92500075A Gloss Black Covers. $564.95

Fits ’18-22 California Softail and ’17-22 California Touring models. Does not fit California Trike models. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation.

92500128 Chrome. $564.95 92500130 Gloss

SCREAMIN’ EAGLE® 265

Milwaukee-Eight® Cams

C. MILWAUKEE-EIGHT® PERFORMANCE CAMS 2 Screamin’ Eagle® SE8-447 Cam – Torque

• Enhanced torque in the low to mid RPM band

• Ideal for a fully loaded bike

• Increased horsepower in the mid RPM range

• Responds well to roll-on throttle application • Crisp throttle response and acceleration at lower speeds • Can be used with stock valve springs Fits ’18-'24 Softail® and ’17-later Touring and Trike models. Not intended for use on '18-later CVO™ Touring and Trike models. Not intended for use on Touring and Softail Models equipped with an OE 117 Engine. Requires separate purchase of Cam Drive Retention Kit P/N

Tuner for proper installation. Pending Regulatory approval for '21-later models. Refer to product information at www.H-D.com/shop for status. 25400199 $309.95

Screamin’ Eagle SE8-462 Cam – Power

• Improved power in mid and

band • Ideal for a fully loaded bike • Thrilling acceleration and crisp throttle response • Ideal for rider who likes to downshift and twist the throttle • Responds well to aggressive throttle application • Can be used with stock valve springs Fits ’18-'24 Softail and ’17-later Touring models (except CenterCooled models). Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. 25400200 $309.95

Screamin’ Eagle SE8-498 Cam – Power Replacement cam for models equipped with Screamin’ Eagle Milwaukee-Eight Stage III Kits.

• Improved acceleration on the straightaway • Ideal for lighter bike with bigger displacement

• Exhilarating acceleration at high engine speeds.

• Responds well to a healthy twist of the throttle

• High-lift profile for complete filling of cylinders

• Requires Performance Valve Springs P/N 18100080 25400202 $309.95

Screamin’ Eagle SE8-515 Cam Replacement cam for models equipped with Screamin Eagle Milwaukee-Eight 114 or 117ci Stage IV kits.

• Hard acceleration off the line

• Improved mid-range and high RPM horsepower

• Stump-pulling torque throughout the RPM band

• Significant increase in rear wheel torque and power

• High lift and long duration for complete cylinder filling

• Requires Performance Valve Springs P/N 18100080 25400201 $309.95

Screamin’ Eagle SE8-517 Cam Developed for Milwaukee-Eight 128CI and 131CI Stage IV kits, this high-performance cam enhances efficient filling of the cylinder at the optimum timing. Offered as a stand-alone component for the engine builder looking to develop a custom performance recipe, it provides premium mid- to upper-range power.

Replacement cam for models equipped with Screamin' Eagle Milwaukee-Eight 128 or 131CI Stage IV kits. Does not fit '25-later Softail. Does not fit '23-later Center-Cooled

266 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage III Upgrade

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE III KIT - 117CI TO 122CI 5

This Stage III kit has been developed to deliver the kind of realworld power increase Touring riders will feel each time they roll on the throttle. The bump up in displacement and compression paired with a Screamin’ Eagle SE8-511 camshaft deliver a significant increase in torque and power over stock and may restore the sensation of riding solo when you’re loaded down with a passenger and gear.

• Delivers up to 31% more horsepower and 18% more torque compared to the Original Equipment engine configuration.

• We’ve done your homework. This street-compliant performance kit has been designed and tested as a system by the performance experts at Harley-Davidson.

• Includes 4.155" Big Bore Bolt-On Cylinders, Forged 10.9:1 High Compression Pistons and Rings, SE8-511 Camshaft, High Capacity Tappets, Stage III Timer Cover Medallion.

• Includes Multi-Layer Coated Head Gaskets, Cylinder Base and Cam Cover Gaskets, most necessary gaskets and seals.

• Pending 49-State U.S. EPA compliant.

92500139 Black Highlighted. $1,999.95 Fits '25-later Softail,'24-later FLHX and FLTRX, '25 FLHXU models, and '26-later Touring models (except CVO™ models). Installation may require Cam Spacer Kit P/N 25928-06. All models require ECM calibration with Screamin' Eagle Pro Street Tuner for proper installation.

5

SCREAMIN’ EAGLE® 267

EAGLE® MILWAUKEE EIGHT ENGINE STAGE III - 121CI TO 125CI 5

This Stage III kit has been developed to deliver the kind of realworld power increase Touring riders will feel each time they roll on the throttle. The bump up in displacement and compression paired with a Screamin' Eagle SE8-511 camshaft deliver a significant increase in torque and power over stock and may restore the sensation of riding solo when you're loaded down with a passenger and gear.

• Black Granite Highlighted finish.

• Deletes Original Equipment Variable Valve Timing (VVT).

• Delivers up to 15% more horsepower and 17% more torque compared to the Original Equipment CVO engine configuration and 5% power and 4% torque increase over a CVO ST engine configuration.

• We've done your homework – This street-compliant performance kit has been designed and tested as a system by the performance experts at Harley-Davidson.

• Includes 4.155" Big Bore Bolt-On Cylinders, Forged 10.9:1 High Compression Pistons and Rings, SE8-511 Camshaft, High Capacity Tappets, Stage III Timer Cover Medallion.

• Includes Multi-Layer Coated Head Gaskets, Cylinder Base and Cam Cover Gaskets, most necessary gaskets and seals.

• 49-State U.S. EPA compliant. 92500141 Black Granite. $1,999.95 Fits '23-later FLHXSE and FLTRXSE, '24-later FLTRXSTSE and '26-later FLHXLSE and FLHXSTSE models. All models require ECM calibration with Screamin' Eagle Pro Street Tuner for proper installation. Does not fit California models.

268 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage IV Upgrade

A. SCREAMIN' EAGLE® MILWAUKEE EIGHT® ENGINE STAGE IV KIT - 117CI TO 131CI 5

For the rider demanding no-compromise performance. This 117ci to 131ci Stage IV Kit was engineered by the pros at HarleyDavidson® to deliver instant arm-stretching torque through the entire rpm range. Made for riders seeking maximum displacement, compression, and power to weight ratio. This Stage IV Kit features the finest Screamin' Eagle components. Many of these new components were informed by extensive testing by the Harley-Davidson Factory Racing Team for the King of the Baggers racing series. The Stage IV kit consists of: All-new Screamin' Eagle Extreme CNC-ported cylinder heads, 68mm throttle body and new cast 68mm intake manifold, new SE8-550 high-lift cam and 6.8 g/sec fuel injectors work together to feed the engine large volumes of air and fuel to help maximize power. New forged high-compression pistons and rings are designed to withstand increased combustion forces. Also includes high-performance tappets and new patent-protected 4.31" steel sleeve cylinders. Screamin' Eagle and Stage IV badging on the cylinder heads and timer cover highlights the powerplant.

• Black Highlighted.

• We've done your homework - Engineered and tested as a complete collection of high-performance components by the Screamin' Eagle pros at Harley-Davidson.

• This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Provides thrilling acceleration when twisting the throttle.

• Can be installed without removing the engine from chassis.

• Screamin' Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

92500146 $3,679.95 Fits '25-later Softail ® models. Requires ECM recalibration with Screamin Eagle Pro Street Tuner for proper installation. Does not fit California models.

SCREAMIN’ EAGLE® 269

Stage IV Upgrade

B. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT - 117CI TO 131CI 5

For the rider demanding no-compromise performance. This 117ci to 131ci Stage IV Kit was engineered by the pros at HarleyDavidson to deliver instant arm-stretching torque through the entire rpm range. Made for riders seeking maximum displacement, compression, and flow, it delivers 131 horsepower and 139 ft-lb of torque to the rear wheel!

This Stage IV Kit features the finest Screamin’ Eagle components. Many of these new components were informed by extensive testing by the Harley-Davidson Factory Racing Team for the King of the Baggers racing series. The Stage IV kit consists of: All-new Screamin’ Eagle Extreme CNC-ported cylinder heads, 68mm throttle body and new cast 68mm intake manifold, new SE8-550 high-lift cam and 6.8 g/sec fuel injectors work together to feed the engine large volumes of air and fuel to help maximize power. New forged high-compression pistons and rings are designed to withstand increased combustion forces. Also includes high-performance tappets and new patent-protected 4.31" steel sleeve cylinders. Screamin’ Eagle and Stage IV badging on the cylinder heads and timer cover highlights the powerplant.

• We’ve done your homework. Engineered and tested as a complete collection of high-performance components by the Screamin’ Eagle pros at Harley-Davidson. This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Provides thrilling acceleration when twisting the throttle.

• Can be installed without removing the engine from chassis.

• Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

5

92500100 Black Highlighted. $4,074.95 Fits ’24 FLHX and FLTRX models. Requires ECM recalibration with Pro Street Tuner for proper installation. Does not fit California models.

92500144 Black Highlighted. $4,074.95 Fits '25-later FLHX, FLTRX, FLHXU and '26-later FLHXL and FLTRXL models. Requires ECM recalibration with Pro Street Tuner for proper installation. Does not fit California models.

Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.

270 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage III Upgrade

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT - 121CI TO 135CI 5

For the rider demanding no-compromise performance. With the largest displacement and the most power of any HarleyDavidson® Stage Kit, this 121ci to 135ci Stage IV Kit was engineered by the pros at Harley-Davidson to deliver instant arm-stretching torque through the entire rpm range. Made for riders seeking maximum displacement, compression, and flow, it delivers 144 horsepower and 149 ft-lb of torque to the rear wheel!

This Stage IV Kit features the finest Screamin’ Eagle components. Many of these new components were informed by extensive testing by the Harley-Davidson Factory Racing Team for the King of the Baggers racing series. The Stage IV kit consists of: All-new Screamin’ Eagle Extreme CNC-ported cylinder heads, 68mm throttle body and new cast 68mm intake manifold, new SE8-550 high-lift cam and 6.8 g/sec fuel injectors work together to feed the engine large volumes of air and fuel to help maximize power. New forged high-compression pistons and rings are designed to withstand increased combustion forces. Also includes high-performance tappets, new patent-protected 4.31" steel sleeve cylinders, and Screamin’ Eagle Pro Billet Cam Plate and Oil Pump. Screamin’ Eagle and Stage IV badging on the cylinder heads and timer cover highlights the powerplant.

• We’ve done your homework. Engineered and tested as a complete collection of high-performance components by the Screamin’ Eagle pros at Harley-Davidson. This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Provides thrilling acceleration when twisting the throttle.

• Can be installed without removing the engine from chassis.

• Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

92500143 Black Granite. $4,574.95 Fits '23-later FLHXSE and FLTRXSE, '24-later FLTRXSTSE and '26-later FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. '23-'24 models require separate purchase of cylinder head retrofit kit P/N 29900147. Models factory equipped with VVT require a separate purchase of P/N 18400117 and 25400103, as the VVT will not be retained. Requires ECM recalibration with Pro Street Tuner for proper installation. Does not fit California models.

SCREAMIN’ EAGLE® 271

Milwaukee-Eight® Stage III Upgrade B. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE III KIT – 107CI TO 119CI 5

This Stage III kit has been developed for the rider looking for a solid “seat of the pants” increase you can feel every time you roll on the throttle. The bump up in displacement and compression deliver a significant increase in torque and power over stock, all the while restoring the sensation of riding solo when you’re loaded down. The Stage III 107CI to 119CI upgrade delivers up to 23% more horsepower and 17% more torque when compared to the Original Equipment engine configurations.

• Delivers increased response throughout the entire RPM range.

• Produces flexible roll-on passing power without a required downshift.

• Delivers excellent stop-light to freeway speed on-ramp acceleration.

49-State U.S. EPA Compliant on select ’18-later Softail® and ’17-later Touring models. Refer to www.H-D.com/Shop for status.

Performance components include:

• Screamin Eagle 4.155 Big Bore Bolt-On Cylinders

• Screamin’ Eagle Forged 11.0:1 High-Compression Pistons and Rings

• Screamin Eagle SE8-447 Torque Cam

• Screamin Eagle High

& Ventilator A/C

Gaskets

• Most necessary gaskets and seals • 119CI Timer Cover Medallion and

Eagle Softail High-Flow Exhaust System P/N's 64900828 or 64900829. Requires separate purchase of Cam Drive Retention Kit P/N 91800088. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). '17-'19 Touring models require separate purchase of HighCapacity Oil Pump P/N 62400247 for Oil-Cooled or 62400248 for Twin-Cooled models. All models require ECM calibration with Screamin' Eagle Pro Street Tuner for proper installation. Does not fit California models. 92500084 Black Highlighted. $2,074.95 5

272 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage III Upgrade

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE

STAGE III KIT – 114CI OR 117CI TO 122CI 5

This Stage III kit has been developed for the rider looking for a solid “seat of the pants” increase you can feel every time you roll on the throttle. The bump up in displacement and compression deliver a significant increase in torque and power over stock, all the while restoring the sensation of riding solo when you’re loaded down. The Stage III upgrade delivers up to 15% more horsepower and 13% more torque when compared to the Original Equipment engine configurations.

• Delivers increased response throughout the entire RPM range.

• Provides thrilling acceleration when twisting the throttle.

• Maintains flat torque curve from cruising RPM to redline.

• Can be installed without removing the engine from chassis.

49-State U.S. EPA Compliant on select ’18-later Softail® Models. Refer to www.H-D.com/Shop for status.

Performance components include:

• Screamin’ Eagle 4.155 Big Bore Bolt-On Cylinders

• Screamin’ Eagle Forged 11.0:1 High-Compression Pistons and Rings

• Screamin’ Eagle SE8-447 Torque

• Screamin’ Eagle High Capacity Tappets

• Screamin’ Eagle High Performance Cam Bearing

• Screamin’ Eagle Stage III Timer Cover & Insert

• Multi-layer coated Head Gaskets

• Cylinder Base and Cam Cover Gaskets

• Most necessary gaskets and seals

• 122CI Timer Cover Medallion and Timer Cover Base

SCREAMIN’ EAGLE STAGE III - 114CI OR 117CI TO 122CI KIT

Fits '17-'25 Touring models (except '25-later FLTRXRRSE) and ’18-‘24 Softail models equipped with 114 or 117CI Milwaukee Eight engines. Does not fit Trike models. Does not fit ’23 later FLHXSE, FLTRXSE and ’24-later FLHX, FLTRX, and FLTRXSTSE models. Requires separate purchase of Cam Drive Retention Kit P/N 91800088. FXFB and FXFBS models require separate purchase of Screamin' Eagle Softail High Flow Exhaust P/N's 64900828 or 64900829. FXDR114 models require separate purchase of Header Pipe Assembly P/N 65600300. Installation may require Cam Spacer Kit P/N 25928-06. For ’17-’18 Touring models, installation of Oil Pump Cover P/N 62400206 is recommended (sold separately). '17-'19 models require separate purchase of High-Capacity Oil Pump P/N 62400247 for Oil-Cooled models or 62400248 for TwinCooled models All models require ECM calibration with Screamin' Eagle Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Does not fit California models.

92500086 Black Highlighted. $2,074.95

SCREAMIN’ EAGLE® 273

Milwaukee-Eight® Stage IV Upgrade

B. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT – 107CI TO 128CI 5

This Stage IV Kit was designed to deliver maximum horsepower – all the way to the redline. Features new CNC-ported heads with 1mm bigger valves and fully machined combustion chambers. Coupled with the kit s high-lift

at high-end RPMs and provide a significant boost of torque from cruising speed. You’ll feel the difference as soon as you twist the throttle.

• Delivers increased response throughout the entire RPM range

• Provides thrilling acceleration when twisting the throttle

• Maintains flat torque curve from cruising RPM to redline

• Can be installed without removing the engine from chassis

49-State U.S. EPA Compliant on select ’17-later Touring Models.

Performance components include:

• Screamin’ Eagle CNC Ported Cylinder Head with CNC machined chamber and 1mm larger valves

• 128 Stage IV Timer cover

• SE8-517 High-Lift Cam

• Forged High Compression Pistons

• Screamin’ Eagle High Performance Cam Bearing • Screamin’ Eagle High Performance Tappets • Screamin’ Eagle 4.31" Steel Sleeve Cylinders

• Screamin’ Eagle 64mm Throttle Body and Cast Manifold

• Screamin’ Eagle High Flow Injectors (5.5 g/sec)

Fits 17- 18 Touring models equipped with air/Oil-Cooled Milwaukee-Eight 107CI engine. Does not fit Trike models. 17-’19 models require separate purchase of High-Capacity Oil Pump P/N 62400248. 17-’18 Screamin Eagle High-Capacity Clutch Plate Kit P/N 37000258. All models require ECM recalibration with the Pro Street Tuner for proper installation.

92500077 Twin-Cooled™ $3,974.95 Black Highlighted.

92500078 Oil-Cooled $3,974.95 Black Highlighted. 5

274 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage IV Upgrade

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT 114CI OR 117CI TO 131CI 5

Go big or go home. With the largest displacement of any Harley-Davidson® Stage Kit, this 114CI to 131CI Stage IV Kit was designed to deliver maximum horsepower – all the way to the redline. Packaged with patent-protected cylinder technology, it allows for the largest bolt-on engine upgrade to any Milwaukee-Eight motor. Features new CNC-ported heads with 1mm bigger valves and fully machined combustion chambers.

Coupled with the kit s high-lift SE8-517 cam, high compression pistons and a 64mm throttle body and intake manifold, this combination delivers a thrilling 131 ft-lb of torque and 121 HP rear-wheel output when paired with Screamin Eagle Street Cannon Mufflers. It’s designed to run wide open at high-end RPMs and provide a significant boost of torque from cruising speed. You’ll feel the difference as soon as you twist the throttle.

• Delivers increased response throughout the entire RPM range.

• Provides thrilling acceleration when twisting the throttle.

• Maintains flat torque curve from cruising RPM to redline.

• Can be installed without removing the engine from chassis.

49-State U.S. EPA Compliant on select ’18-later Touring Models. Refer to www.H-D.com/Shop for status.

Performance components include:

• Screamin’ Eagle CNC Ported Cylinder Head with CNC machined chamber and 1mm larger valves

• 131 Stage IV Timer cover

• SE8-517 High-Lift Cam

• Forged High Compression Pistons

• Screamin’ Eagle High Performance Cam Bearing

• Screamin’ Eagle High Performance Tappets

• Screamin’ Eagle 4.31" Steel Sleeve Cylinders

• Screamin’ Eagle 64mm Throttle Body and Cast Manifold

• Screamin’ Eagle High Flow Injectors (5.5 g/sec)

5

SCREAMIN’ EAGLE® 275

Milwaukee-Eight® Stage IV Upgrade

B. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KIT Oil-Cooled: 5 Fits '17-later Touring models equipped with air/Oil-Cooled Milwaukee-Eight 114 or 117CI engine. Does not fit Trike models. Does not fit ’23-later FLHXSE, FLTRXSE and ’24-later FLHX, FLTRX, FLTRXSTSE, '25-later FLHXU, FLTRXRRSE and '26-later FLHXL, FLHXLSE, FLHXSTSE and FLTRXL models. '17-'19 models require separate purchase of High-Capacity Oil Pump P/N 62400247. '17-'18 Screamin' Eagle High-Capacity Clutch Plate Kit P/N 37000258. ’18-19 CVO™ models require separate purchase of 62700204. All models require ECM recalibration with the Pro Street Tuner or dealership installed Screamin’ Eagle calibration for proper installation. Does not fit California models, instead purchase P/N 92500107. 92500079 Black Highlighted. $3,974.95 92500082 Black Granite. $3,974.95

C. SCREAMIN’ EAGLE MILWAUKEE-EIGHT ENGINE STAGE IV KIT

Twin-Cooled™: 5 Fits '17-later Touring models equipped with Twin-Cooled Milwaukee-Eight 114 or 117CI engine. Does not fit Trike models. Does not fit ’23 later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE, 25-later FLHXU,

276 SCREAMIN’ EAGLE®

Milwaukee-Eight® Stage IV Upgrade

SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE STAGE IV KITS 5

Go big or go home. With the largest displacement of any Harley-Davidson® Stage Kit, this 107CI to 128CI or 114CI to 131CI Stage IV Kit is designed to deliver maximum horsepower – all the way to the redline. Packaged with patentprotected cylinder technology, it allows for the largest bolt-on engine upgrade to any Milwaukee-Eight motor. Features new CNC-ported heads with 1mm bigger valves and fully machined combustion chambers. Coupled with the kit s high-lift SE8-517 cam, high compression pistons and a 64mm throttle body and intake manifold, this combination delivers a thrilling 135 ft-lb of torque and 124 HP rear-wheel output when paired with the Screamin Eagle Street Cannon Mufflers and Ventilator Air Cleaner. It’s designed to run wide open at high-end RPMs and provide a significant boost of torque from cruising speed. You’ll feel the difference as soon as you twist the throttle.

• Delivers increased response throughout the entire RPM range.

• Provides thrilling acceleration when twisting the throttle.

• Maintains flat torque curve from cruising RPM to redline.

• Can be installed without removing the engine from chassis.

49-State U.S. EPA Compliant on select ’18-later Softail® Models. Refer to www.H-D.com/Shop for status.

Performance components include:

• Screamin’ Eagle CNC PCNC-ported cylinder head with CNC-machined chamber and 1mm larger valves

• 128 or 131 Stage IV Timer cover

• SE8-517 High-Lift Cam

• Screamin’ Eagle Forged 10.7:1 High-Compression Pistons and Rings

• Screamin’ Eagle High Performance Cam Bearing

• Screamin’ Eagle High Performance Tappets

• Screamin’ Eagle 4.31" Steel Sleeve Cylinders

• Screamin’ Eagle 64mm Throttle Body and Cast Manifold

• Screamin’ Eagle High Flow Injectors (5.5 g/sec)

A. SCREAMIN’ EAGLE STAGE IV - 107CI TO 128CI KIT 5 Fits ’ 18- ’ 24 Softail 107CI models. FXFB requires separate purchase of Screamin’ Eagle® Softail High Flow Exhaust P/N’ s 64900828 or 64900829. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Installation may require Cam Spacer Kit P/N 25928-06. ’18- 19 models require separate purchase of High-Capacity Oil Pump P/N 62400247. All models require ECM calibration with Screamin’ Eagle Pro Street Tuner for proper installation. Does not fit California models.

92500094 107CI to 128CI $3,799.95 Black Highlighted.

SCREAMIN’ EAGLE STAGE IV – 107CI TO 128CI KIT BLACK HIGHLIGHTED

Stage IV Softail vs

SCREAMIN’ EAGLE® 277

SCREAMIN’ EAGLE ® HIGH VOLUME OIL PUMP & CAM SUPPORT PLATE KIT

A high-performance Milwaukee-Eight ® engine deserves high-performance oiling. This new kit includes a Super Sucker oil pump to improve the oil flow rate to critical engine components, and a CNC machined billet aluminum cam plate for precise alignment of a high-performance cam and chain. It’s the ideal component combination for a tuned-up Milwaukee-Eight engine. Install and ride hard with confidence.

SCREAMIN’ EAGLE® 279

High Volume Oil Pump & Cam Support

A. SCREAMIN’ EAGLE®

OIL PUMP & CAM SUPPORT PLATE KIT

A high-performance Milwaukee-Eight engine deserves high-performance oiling. This new kit(s) includes a Super Sucker oil pump to improve the oil flow rate to critical engine components, and a CNC machined billet aluminum cam plate for precise alignment of high-performance cam and chain. It’s the ideal component combination for a tuned-up Milwaukee-Eight engine. Install and ride hard with confidence.

• Heat-treated 6061 billet aluminum cam support plate with an orange anodized finish is strong and rigid to provide superior strength, rigidity, and durability

• CNC-precision machining ensures precise dimensions and constant material thickness across the plate, enabling perfect alignment of cams and chains

• Pressed-in 660 bronze cam bushings provide enhanced wear resistance under increased loads from high-performance cams for miles of worry-free riding

• Oil pump features a 9% larger gerotor for increased flow at idle and 33% more scavenge capacity compared to a 2020Later Original Equipment oil pump, for increased performance, efficiency and engine durability

• The hub-and-spoke oil passage design improves oil flow rate to critical engine components

• Upgraded filter protection promotes engine durability: Two screens mounted in both pickups and a magnet in between the pickups provide extra oil filtering to remove contaminants before they can reach critical upper end component

62400260

$799.95 Fits ’17-later models equipped with an Air/Oil-Cooled Milwaukee-Eight engine. Does not fit models equipped with VVT.

62400264

$799.95

Fits '17-later models equipped with Twin-Cooled MilwaukeeEight engines and ’24-later models equipped with CenterCooled Milwaukee-Eight engines. Does not fit models equipped with VVT.

B. SCREAMIN’ EAGLE MILWAUKEE-EIGHT – HEADBOLT KIT 2 Details matter when building a high-performance engine. Details like these Screamin Eagle Milwaukee-Eight Head Bolts – made from 8740 chromoly to be 23 percent stronger than stock bolts. The ideal upgrade for big-displacement and highcompression racing applications or Stage III or Stage IV builds. Lock down your top end, for the long run.

1 6061 BILLET CAM PLATE

The cam support plate and oil pump are made from heattreated 6061 billet aluminum with a surface-hardened orange anodized finish. CNC machining ensures precise dimensions and constant material thickness across the plate and pump, enabling perfect alignment of components.

2 660 HI-PRO BUSHINGS Pressed-in 660 bronze cam and pinion shaft bushings provide enhanced wear resistance under increased loads from highperformance cams for miles of worry-free riding. 3 9% LARGER GEROTOR The Super Sucker oil pump features a 9% larger gerotor for increased flow at idle and 33% more scavenge capacity compared to a 2020-Later Original Equipment oil pump, for increased performance, efficiency and engine durability. 4 HI-FLOW OIL PASSAGES

The hub-and-spoke oil passage design improves oil flow rate to critical engine components by minimizing restrictions from intersecting passages. 5 ENHANCED FILTERING Two screens mounted in both pickups and a magnet in between the pickups provide extra oil filtering to remove potential contaminants before they can reach critical upper end components. This is key to promoting long life in highperformance engines.

• Black oxide finish with Screamin’ Eagle logo provides corrosion resistance and showcases performance.

• Premium 8740 chromoly steel bolts provide a 23% increase in ultimate strength and 23% increase in yield strength compared to Original Equipment head bolts for desirable clamp load on a higher-compression engine.

• Cost savings – these bolts may be reused if the top end is disassembled for upgrades or service

• Perfect upgrade during a Screamin’ Eagle Stage III or Stage IV installation. 10400069 $299.95 Fits ’17-later Milwaukee-Eight engines.

and/or

280 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® TIMER COVER INSERTS - STAGE KIT LOGO

Showcase your bike’s performance enhancements with the Screamin’ Eagle Stage Inserts. The Stage Inserts are made to complement the Screamin’ Eagle Timer Cover Base (sold separately).

B.

Brag a little. Let

world know you’re running HarleyDavidson® V-Twin performance. These Screamin’ Eagle Timer Cover Inserts show off what upgrade you’ve made and complement a Chrome or Black engine finish.. Fits ’23-later Center Cooled models.

SCREAMIN’ EAGLE® 281

282 SCREAMIN’ EAGLE®

Twin Cam Stage Upgrades

TWIN CAM POWERTRAIN

Screamin’ Eagle® Stage upgrades offer complete street-compliant performance configurations engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and trial-and-error testing normally associated with engine modifications, Stage upgrades include everything you need to enhance your bike’s performance.

STAGE I

INTAKE + EXHAUST + TUNING

The easiest and most cost-effective step to improve your motorcycle’s performance is to increase the airflow into and out of the engine. A high-flow air cleaner and system-matched slip-on muffles provide horsepower and torque improvements you can feel throughout the RPM range, and serve as the core components for all performance upgrades. ECM calibration is required to tune the fuel flow and timing required to accommodate the improved airflow.

Stage I upgrade can be installed without engine disassembly. No special tools are required. Requires ECM tuning.

SCREAMIN’ EAGLE®

STAGE II

STAGE I + CAM UPGRADE

Adding performance cams to a Stage I equipped bike is the next step to improved performance. Cam choices allow you to tailor the engine’s performance to your specific needs. A torque cam offers on-demand throttle response from low to mid RPM at cruising speed. A power cam targets high-RPM, wide-open throttle response that keeps pulling right up to redline. ECM calibration tuning is required to accommodate the increased valve timing, and performance valve springs may be required for high-lift cams.

Stage II upgrade requires minor engine disassembly to replace the cam. Adjustable pushrods allow cam installation without removing the rocker box. Special tools and ECM tuning are required.

STAGE III

STAGE I + CAMS, BIG BORE CYLINDERS & PISTONS

The next step on the performance journey is to build a bigger engine. An increase in engine displacement allows the engine to swallow more air and fuel, a highercompression piston squeezes the air/fuel into a more volatile mixture, and when combined, generates more power when ignited. A displacement and compression increase provides torque increases throughout the entire RPM range with a 15-25% improvement in the mid-range power. ECM calibration tuning is required to adjust fuel flow and timing to accommodate the increased displacement.

Stage III bolt-on upgrade requires removal of the engine’s top end and opening the cam chest. Engine remains in the chassis and no machining is required. Special tools and ECM tuning are required.

STAGE IV

STAGE I + CAMS, BIG BORE CYLINDERS, PISTONS, CYLINDER HEADS & THROTTLE BODY

To maximize the impact of the increased displacement gained with Stage III updates, the addition of free-flowing ported cylinder heads and a big bore throttle body top off the performance build. Designed to satisfy the high-RPM, throttle-twisting rider, the Stage IV update delivers 20-30% increase in power that keeps pulling right up to the redline, without sacrificing mid-range torque. ECM calibration tuning is required to add more fuel, and a higher-lift cam may be required to deliver maximum power.

Stage IV bolt-on upgrade requires removal of the engine’s top end and opening the cam chest. Engine remains in the chassis and no machining is required. Special tools and ECM tuning are required.

Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States.

The street legal and/or street compliant statements may not apply to markets outside of the United States.

284 SCREAMIN’ EAGLE®

Cam Stage I Upgrade

A. SCREAMIN’ EAGLE® HEAVY BREATHER FILTER COVER – TEARDROP

Dress up the Heavy Breather Air Cleaner with this radical cover. Manufactured from forged aluminum and precision CNC-machined and polished, these easy-to-install two-piece covers add a rich custom look. Cover is available in mirrorchrome or cut back gloss black finish to match your customizing direction. Kit includes water-repellent rain sock.

Fits models equipped with Screamin’ Eagle Heavy Breather Air Cleaner Kits on Twin Cam and XL model. (except Compact Heavy Breather P/N 28716-10A, Heavy Breather Elite P/N 29400172 and Milwaukee-Eight® Heavy Breather P/N 29400263 or 29400264).

28739-10A Cut Back Gloss Black

B. SCREAMIN’ EAGLE HEAVY BREATHER DECORATIVE ENDCAP – WILLIE G SKULL

Add a sinister touch to your Heavy Breather Air Cleaner. Chrome-plated self-adhesive cover features a forward-facing Willie G Skull medallion.

28720-10 $42.95

Fits models equipped with Screamin’ Eagle Heavy Breather Air Cleaner Kits (except Compact Heavy Breather P/N 2871610A, Heavy Breather Elite P/N 29400172 and MilwaukeeEight Heavy Breather P/N 29400263 or 29400264).

C. SCREAMIN’ EAGLE HEAVY BREATHER DECORATIVE MEDALLION

Add the finishing touch to your Heavy Breather Air Cleaner by installing this medallion. Featuring a bright chrome-plated die-cast base and contrasting black inlay with diamond-cut Screamin’ Eagle script. Easy to install.

29017-09 $31.95

Fits models equipped with Screamin’ Eagle Heavy Breather Air Cleaner Kits (except Compact Heavy Breather P/N 2871610A, Heavy Breather Elite P/N 29400172 and MilwaukeeEight Heavy Breather P/N 29400263 or 29400264).

D. THROTTLE BODY COVER

This cover dresses the area between the Twin Cam cylinders for a custom look. The formed cover hugs the contour and conceals the electronic control module throttle body for a clean appearance. Available in your choice of mirror chrome or gloss black finish. Easy-to-install kit includes gaskets.

Fits ’14-’15 FLSTNSE, ’11-’12 FLSTSE, ’13-’14 FXSBSE, and ’16-’17 FXDLS and Softail®, ’08-’16 Touring and Trike models equipped with Screamin’ Eagle Heavy Breather or Burst Air Cleaner Kit.

286 SCREAMIN’ EAGLE®

Twin Cam Stage I Upgrade

A. SCREAMIN’ EAGLE® HIGH-FLOW AIR CLEANER – TWIN CAM 2

The High-Flow Air Cleaner Kit provides increased airflow to boost the power of your fuel-injected model. Kit features a one-piece cast back plate with integral breather and mounting brackets for simplified installation and a synthetic washable air cleaner element that does not require oiling. Available with a brilliant chrome or black back plate, this round air cleaner element can be dressed with most Original Equipment or accessory air cleaner covers. Or choose to flaunt your performance gains with the open element look, and finish it off with a Rain Sock Kit P/N 28728-10 and custom Air Cleaner Trim from one of the Harley-Davidson decorative collections. This kit includes air cleaner, back plate, breather and all required hardware. 50-State U.S. EPA compliant.

Fits ’16-’17 Softail® and ’14-’16 Touring and Trike models (except CVO™ Touring) with Original Equipment 50mm Throttle Body. All models require ECM calibration for proper installation. ’17 models require recalibration with Screamin’ Eagle® Pro Street Tuner (sold separately).

29400234 Chrome. $199.95

29400233 Texture Black. $189.95

Fits ’08-’15 Softail models (except CVO Softail). Also fits ’08-’17 Dyna® models (except ’16-’17 FXDLS) equipped with accessory Air Cleaner Cover. Also fits ’04-’07 EFI Dyna, ’01-’07 EFI Softail, and ’02-’07 EFI Touring. FXS, FLS, FLSTSB and ’13-’17 FXDB models require separate purchase of Gasket P/N 29591-99 and Screw P/N 29703-00. All models require ECM calibration for proper installation. ’17 models require recalibration with Screamin’ Eagle Pro Street Tuner (sold separately).

29400240 Chrome. $199.95

29400239 Texture Black. $189.95 Fits ’08-’13 Touring and Trike models (except CVO Touring) with Original Equipment 50mm throttle body. All models require ECM calibration for proper installation.

29400238 Chrome. $199.95

29400237 Texture Black. $189.95

Fits ’16-’17 FXDLS and Softail, ’14-’17 CVO Softail, and ’14-’16 Touring and Trike models equipped with Screamin’ Eagle 58mm EFI Throttle Body. Requires separate purchase of an Accessory Air Cleaner Cover. All models require ECM calibration for proper installation.

288 SCREAMIN’ EAGLE®

TWIN CAM STAGE II UPGRADE

Camshafts are a fundamental ingredient in the performance recipe, because they control the timing and duration of all major engine events. They are the primary means by which you can tune your engine’s horsepower and torque output. Every cam has unique lift and overlap performance characteristics, which means you need to select cams based on exactly the kind of power you’re looking for.

A. SCREAMIN EAGLE® TWIN CAM PERFORMANCE CAMS 2

Kits include front and rear cams. Splined rear cam is included for exceptional load handling capability. Gaskets and bearings not included. Cam Installation Kit P/N 17045-99C (sold separately) includes all required gaskets, bearings and seals for proper installation. Dealer installation is recommended and special tools are required for proper installation.

SE-255 CAM KIT

The ultimate in torque cams, this cam offers substantial increase in low end torque for engines up to 110 cubic inches with compression ratios up to 10 to 1. The low end torque increases are great for heavy bikes or for the person who routinely shifts below 4500 RPM and wants the power available to pass without downshifting. The cam still makes peak power above 5000 RPM so people with lighter bikes will enjoy the torque increases without feeling like the bike runs out of air at higher engine speeds. 50-State U.S. EPA compliant.

25638-07

$399.95

For use on ’09-’13 Dyna®, Softail®, and ’09-’13 Touring and Trike models with 103CI and 110CI engines. All models require ECM calibration for proper installation. Labor cost not included. See Dealer for details.

SE-259E CAM KIT

Developed specifically for big displacement Twin Cam engines, this cam has a modern lobe design that allows for higher valve lifts for a given duration. A high-lift version of the SE-211 camshaft, this cam works great with 103-cubic-inch and larger engines with free-flowing intake and exhaust. It can be used with stock heads (updated with race springs) and highcompression pistons for even more torque than a SE-211 cam or can be coupled with any of the performance heads to realize the full power potential. 50-State U.S. EPA compliant.

25482-10

$399.95

For use on ’11-’15 103CI and 110CI Touring and Trike models. Installation requires separate purchase of Performance Valve Spring Kit P/N 18013-03A. All models require ECM calibration for proper installation. Labor cost not included. See Dealer for details.

SE-585 CAM KIT

This cam is a great match for riders of heavy Touring bikes looking for big torque at the low end. Just a quick downshift to fourth gear results in an effortless pass of that slow-moving tractor-trailer ahead of you. This cam provides an early hit of torque at the low end of the RPM spectrum. A unique combination of lift, cam lobe duration and an enhanced cam profile ramp provides a performance boost you can feel. The cam’s QRD (Quiet Ramp Design) delivers high torque throughout the RPM range while reducing valve train noise. 50-State U.S. EPA compliant.

25400117

For use on ’14-’16

$399.95

Touring models with the use of a 58mm Throttle Body. Also fits ’14-’16 CVO™ Touring models with or without the use of a 58mm Throttle Body. Does not fit Trike models. Installation requires separate purchase of Performance Valve Spring Kit P/N 1801303A. All models require ECM calibration for proper installation. Labor cost not included. See Dealer for details.

QUICK-INSTALL ADJUSTABLE PUSHRODS –CHROME COVERS

B. SCREAMIN’ EAGLE PREMIUM TAPERED QUICK-INSTALL ADJUSTABLE PUSHRODS –GLOSS BLACK COVERS

TAPERED QUICK-INSTALL ADJUSTABLE PUSHRODS 2

These premium pushrods are tapered for enhanced clearance at the cylinder head, allowing the use of higher lift cams. The one-piece chrome moly tube adds rigidity and durability and the threaded adjustment feature provides easy cam installation without removing the cylinder heads or rocker boxes. To simplify adjustment, the tube features six flats, with one flat marked with a large dot for tracking the adjustment. The threaded rod features 4 flats to reduce wrench swing. Each pushrod features the Screamin’ Eagle logo and is marked for “Intake” or “Exhaust.” Kit includes 4 pushrods and required pushrod tubes.

Fits ’99-’17 Twin Cam-equipped models. 17900032 With Gloss Black Covers. $329.95 18404-08 With Chrome

C. SCREAMIN’ EAGLE HIGH-CAPACITY TAPPETS 2 Screamin’ Eagle Tappets feature large high-capacity needles in the roller bearing assembly to improve reliability when operating with high-lift cams, high-pressure valve springs and in high-RPM applications. The 25% larger needle bearings increase the dynamic load rating by approximately 20% when compared to the Original Equipment Twin Cam tappets. The unique design delivers superior tappet life in performance applications. Set of 4.

NOTE: Separate purchase of Cam Drive Retention Kit P/N 25566-06 and Cam Spacer Kit P/N 25928-06 may be required. These kits contain five different spacers to achieve proper sprocket alignment. Individual spacers can be purchased separately.

18572-13

$284.95

Fits ’17-later Milwaukee-Eight® Engine equipped models, ’00’22 XL and XR models and ’99-’17 Twin Cam-equipped models.

D. SCREAMIN’ EAGLE PERFORMANCE VALVE SPRING KIT* 2

This performance beehive-shaped Valve Spring Kit will permit the Sportster® engine to rev to 7000 RPM. The unique ovate wire yields increased performance from a compact spring design. The installed spring pressure is increased to 208 lbs and allows a maximum lift of .590". Complete kit includes springs, upper collars and keepers and lower collars with integral valve seals.

18013-03A $199.95

Fits ’04-’22 XL, XR and ’05-’17 Twin Cam-equipped models. Does not fit FXDLS, FLSS, FLSTFBS or Screamin’ Eagle Performance Heads with .3125" diameter valves.

E. PUSHROD COVER KIT – GLOSS BLACK Complete the Dark Custom look. These covers replace existing chrome covers to give your bike a blacked-out appearance down to the smallest detail. Pushrod covers are finished in gloss black and the kit includes four bottom cover tubes and the four upper clips. Installation retains the Original Equipment chrome short center tube to create a high-contrast accent. Cover Kit can be installed on engines already equipped with Adjustable Pushrods or can be installed by removing rocker box covers, rocker arms and non-adjustable pushrods. Consult your dealer or service manual for installation. 17900033 Covers Only. $89.95 Fits ’99-’17 Twin Cam-equipped models. Requires

290 SCREAMIN’ EAGLE®

Twin Cam Stage II Upgrade

A. SCREAMIN’ EAGLE® BILLET CAM SUPPORT PLATE WITH HIGH-VOLUME OIL PUMP 2

A great upgrade for any performance motor. The Billet Cam Support Plate is manufactured from billet aluminum with pressed-in bronze bushings and is pre-assembled with the crankshaft bushing and oil pressure relief valve. Aluminum is specified at 6061 billet plate, heat-treated to T6 specifications with a surface-hardened anodized finish to provide superior strength, rigidity and durability. CNC-precision machining ensures precise dimensions and constant material thickness across the plate, enabling perfect alignment of cams and chains. Cam bushings are made from 660 bronze materials to provide enhanced wear resistance and to stand up to increased loads from the high lift cams common in large displacement motors. The improved Screamin’ Eagle highflow oil pump provides higher pressure when the oil is hot to keep pressure drops to a minimum and increases the oil supply by 16% and the scavenging by 29% over the ’06-’17 Original Equipment oil pump.

25282-11

$539.95

Fits ’06-’17 Dyna® and ’07-’17 Softail®, and ’07-’16 Touring and Trike models. Installation requires separate purchase of Cam Service Kit P/N 17045-99D and Drive Gear Retention Kit P/N 25566-06.

B. SCREAMIN’ EAGLE HYDRAULIC

CAM CHAIN TENSIONER AND HIGH-FLOW OIL PUMP UPGRADE KIT

2

This kit updates the cam chain tensioner of your Twin Cam 88® engine to the latest design, as featured on the Twin Cam 96™ engine. The billet cam support plate has been designed to allow the installation of the Twin Cam 96™ hydraulic cam chain tensioner to Twin Cam 88-equipped models. These Hydraulic Cam Chain Tensioners will significantly outlast the springloaded tensioners and are an ideal addition to an engine modified for improved performance. In addition, ’02-’06 models utilize a Twin Cam 96 single row front roller chain and sprocket (included in kit). ’99-’01 models use Original Equipment front silent chain and sprocket to retain the cam position sensor function. The kit includes an improved Screamin’ Eagle HighFlow Oil Pump that provides increased oil pressure at highoperating temperatures. This kit increases the oil supply by 23% and scavenging by 50% when compared to the ’99-’05 Original Equipment oil pump and reduces operating temperature of bearings to improve bearing life.

25284-11

$599.95

Fits ’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models. Installation requires separate purchase of Spacer Kit P/N 25285-08, Cam Service Kit P/N 17045-99D and Drive Gear Retention Kit P/N 25566-06.

C. SCREAMIN’ EAGLE HIGH-PERFORMANCE INNER CAM BEARINGS 26

High-performance Inner Cam Bearings are a smart upgrade when installing high-lift cams in a race bike. These bearings provide increased load capacity and extend the engine life in extreme racing conditions. Kit includes two bearings required to complete one Twin Cam engine.

24017-10

$28.95

Fits ’99-’05 Dyna, ’00-’06 Softail and ’99-’06 Touring models. 24018-10 $28.95

Fits ’06-’17 Dyna, ’07-’17 Softail and ’07-’16 Touring and Trike models.

BIG BORE CYLINDERS

In the past, the only way to increase the bore of your 103or 110-cubic-inch Twin Cam V-Twin motor was to tear down the motor and re-bore the engine cases to fit larger bore cylinder spigots. It was a labor-intensive and expensive process. The Screamin’ Eagle team has engineered a 4" Big Bore Cylinder and Piston package that increase the internal bore from 3-7/8" to 4", without increasing the outside diameter of the cylinder spigot. The cylinder slips into the existing case bore without modification.

SCREAMIN’ EAGLE® 291

STAGE III & IV UPGRADES

Screamin’ Eagle® Stage Kits offer complete street-compliant performance configurations engineered to help you generate specific torque and horsepower gains. Eliminating all the guesswork and trial-anderror testing normally associated with engine modifications, Stage Kits include everything you need to enhance your bike’s performance, including big-bore cylinders, high-compression pistons, performance cams and high-flow air cleaners.

292 SCREAMIN’ EAGLE®

Twin Cam Stage III Upgrade

SCREAMIN’ EAGLE® TWIN CAM STAGE III KIT –103CI TO 110CI 2

Build a fast, reliable 110-cubic-inch Twin Cam hauler without having to remove the motor from the chassis. This Stage III

Street Performance Kit combines system-matched Screamin’ Eagle big bore cylinders, high-compression pistons and performance cams and valve train components with the Original Equipment cylinder heads for a cost-effective boost in torque and performance. The exclusive bolt-on 4.0" cylinders are engineered with high-strength slim-wall spigots that slip into the factory crank case without any additional machining. The 4" flat top pistons team with the stock cylinder heads to produce a performance-enhancing 10.2:1 compression ratio (10.4:1 on Twin-Cooled™ equipped models), and the high-lift SE-585 cam produces a boost in torque throughout the RPM range. 50-State U.S. EPA compliant.

Kit includes:

Screamin’ Eagle 4.0" Bolt-On Cylinders

Forged 10.2:1 Compression Pistons and Rings SE-585 Cams High Performance Valve Springs Perfect-Fit Pushrods

Screamin’ Eagle High-Capacity Roller Tappets

Top End and Cam Cover Gaskets Heavy Duty Clutch Spring

92500035 Black Highlighted.

$2,149.95 Fits ’16-’17 Softail® and ’14-’16 Touring models. Does not fit Trike models, FLSS, FLSTFBS, CVO™ 110 models or models with engine cases that have been machined to accept largebore cylinders. Requires separate purchase of Cam Drive Retention Kit P/N 25566-06. Cam Spacer Kit P/N 25928-06 is recommended. Twin-Cooled™ models require separate purchase of model-specific head gaskets. All models require recalibration with Screamin’ Eagle Pro Street Tuner (sold separately).

SCREAMIN’ EAGLE® 293

Notice:

294 SCREAMIN’ EAGLE®

Twin Cam Stage IV Upgrade

SCREAMIN’ EAGLE® TWIN CAM CONVERSION

KIT – 103CI TO 110CI

2

Bring your Twin Cam motorcycle up to the same 110-cubicinch displacement and power output as the CVO™ Screamin’ Eagle® models without expensive machining or removing the engine from the chassis. This street compliant kit combines the proven SE-255 cams and cylinder heads of the CVO model with exclusive Screamin’ Eagle bolt-on 4.0" cylinders and system-matched pistons to deliver high torque and reliable everyday performance. The automatic compression releaseequipped cylinder heads and the flat top forged pistons combine to develop a 9.3:1 compression ratio for easy starting, and the Screamin’ Eagle lifters ensure quiet reliable valve train operation. 50-State U.S. EPA compliant.

Kit includes:

Screamin’ Eagle 4.0" Bolt-On Cylinders

Forged 9.3:1 Compression Pistons and Rings CVO 110 Cylinder Heads

SE-255 Cams

High-Capacity Roller Tappets

Top End and Cam Cover Gaskets

Heavy Duty Clutch Spring Cam Spacer Kit P/N 25928-06 is recommended

92500032 Black Highlighted. $2,749.95 Fits ’14-’16 FLHTCU, FLHTCUL, FLHTK, FLHTKL and FLTRU models with Twin-Cooled engines. Does not fit Trike models, CVO 110 models, or models with engine cases that have been machined to accept large bore cylinders. Requires separate purchase of Screamin’ Eagle high-flow air cleaner. Installation requires separate purchase of Primary Cover Gasket. Cam Drive Retention Kit P/N 25566-06. Cam Spacer Kit P/N 25928-06 is recommended. All models require ECM calibration for proper installation.

SCREAMIN’ EAGLE® 295

Notice:

cylinder heads to produce a performanceenhancing 9.9:1 compression ratio, and the high-lift SE-259E cam produces a boost in torque throughout the RPM range. 50-State U.S. EPA compliant.

Kit includes: Screamin’ Eagle 4.125" Bolt-On Cylinders Forged 9.9:1 Compression Pistons and Rings Screamin’ Eagle 58mm Throttle Body High Flow Fuel Injectors (5.3 g/s) SE-259E Cams Perfect-Fit Pushrods Screamin’ Eagle High-Capacity Roller Tappets

296 SCREAMIN’ EAGLE®

SPORTSTER® POWERTRAIN

Screamin’ Eagle® Stage upgrades offer complete street-compliant performance configurations engineered to generate specific torque and horsepower gains. Eliminating all the guesswork and trial-and-error testing normally associated with engine modifications, Stage upgrades include everything you need to enhance your bike’s performance.

STAGE II

STAGE I + CAM UPGRADE

Adding performance cams to a Stage I equipped bike is the next step to improved performance. Cam choices allow you to tailor the engine’s performance to your specific needs. A torque cam offers on-demand throttle response from low to mid RPM at cruising speed. A power cam targets high-RPM, wide-open throttle response that keeps pulling right up to redline. ECM calibration tuning is required to accommodate the increased valve timing, and performance valve springs may be required for high-lift cams.

SCREAMIN’ EAGLE® 297

STAGE IV

STAGE I + CAMS, PISTONS, CYLINDER HEADS & THROTTLE BODY

For maximum performance improvement, the addition of high-compression pistons, free-flowing ported cylinder heads and a big bore throttle body top off a performance build. The large-diameter throttle body and port-matched intake manifold deliver huge volumes of fuel and air to the engine, the smooth passages and larger valves easily dump the mixture into the engine and the high compression pistons squeeze the air/ fuel into a more volatile vapor. When ignited, the result is a major power increase. Designed to satisfy the high-RPM, throttle-twisting rider, the Stage IV update delivers 20-30% increase in power that keeps pulling right up to the redline, without sacrificing mid-range torque. ECM calibration tuning is required to add more fuel, and a higher-lift cam may be required to deliver maximum power.

298 SCREAMIN’ EAGLE®

Sportster® Stage I Upgrade

A. SCREAMIN’ EAGLE® HEAVY BREATHER PERFORMANCE AIR CLEANER KIT 2

This high-flow forward-facing exposed element Air Cleaner Kit is sure to turn heads at the starting line. Featuring a polished elbow and exposed filter, this unique air cleaner system offers improved performance and airflow when compared to the stock or Screamin’ Eagle High-Flow Air Cleaner. The washable and rechargeable filter features a bright chrome end cap with a laser-engraved Screamin’ Eagle logo. Intake tube and back plate are made from die-cast lightweight aluminum and are polished and chrome-plated or painted black for a brilliant finish. The back plate features integral breathers and sealed breather bolt plug. Kit includes a water-repellent rain sock and all mounting hardware. 50-State U.S. EPA compliant.

Fits 08-’22 XL models with Original Equipment Throttle Body. All models require ECM calibration for proper installation. ’17-later models require recalibration with Screamin Eagle Pro Street Tuner (sold separately). Pending approval for use in California on ’21 models. Refer to H-D.com/shop for status.

29080-09A Gloss Black. $424.95

Fits ’14-’22 XL1200 model equipped with Screamin’ Eagle High Flow 58mm Throttle Body. All models require ECM calibration for proper installation. ’17-later models require recalibration with Screamin’ Eagle Pro Street Tuner (sold separately).

29400227A Gloss Black. $424.95

NOTE: The washable and rechargeable filter uses a special coating to help filter fine particles from the incoming air. With time, the oil in the filter will dissipate and the element will begin to turn gray. The original red color can be restored with an application of K&N® Air Filter Oil.

B. SCREAMIN’ EAGLE HEAVY BREATHER FILTER COVER – TEARDROP

Dress up the Heavy Breather Air Cleaner with this radical cover. Manufactured from forged aluminum and precision CNC-machined and polished, these easy-to-install two-piece covers add a rich custom look. Cover is available in mirrorchrome or cut back gloss black finish to match your custom-

P/N 29400172 and Milwaukee Eight® Heavy Breather P/N 29400263 or 29400264).

28739-10A Cut Back Gloss Black – End Logo. $224.95 28740-10A Chrome – End Logo. $224.95

C. SCREAMIN’ EAGLE PERFORMANCE AIR CLEANER KIT – RAIL COLLECTION

The look is bold and the performance exhilarating. This

inspired air cleaner is engineered to flow through the perimeter and the face of the air filter, providing high volumes of unrestricted airflow to the engine. The open-design face plate features a rich black finish with machined longitudinal strakes to expose the glowing aluminum below. Kit includes air cleaner trim, one-piece cast back plate, high-flow washable air filter element, rain sock and all required hardware. 50-State U.S. EPA compliant.

29400232A

Fits 07-’22 XL models with Original Equipment throttle body. All models require ECM calibration for proper installation. 17later models require recalibration with Screamin Eagle Pro Street Tuner (sold separately). Pending approval for use in California on 21 models. Refer to H-D.com/shop for status.

300 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® PERFORMANCE II SE-585 CAM KIT– SPORTSTER®

The high-lift full throttle cam kit provides significant horsepower gains when coupled with high-flowing exhaust and intake components, and is a great fit for full-throttle horsepower junkies. 50-State U.S. EPA compliant. (exception below).

25400125

$464.95

Fits ’14-’22 XL1200 models. Requires installation of Performance Cylinder Heads P/N 16500074 or 16500347, or upgrade of Original Equipment heads with Performance Valve Spring Kit P/N 18013-03A. All EFI models require ECM calibration for proper installation. ’17-later models require recalibration with Screamin’ Eagle Pro Street Tuner (sold separately). Labor cost not included. See Dealer for details. Does not fit ’22 California models.

B SCREAMIN’ EAGLE HIGH-CAPACITY TAPPETS 2

Screamin’ Eagle Tappets feature large high-capacity needles in the roller bearing assembly to improve reliability when operating with high-lift cams, high-pressure valve springs and in high-RPM applications. The 25% larger needle bearings increase the dynamic load rating by approximately 20% when compared to the Original Equipment Twin Cam tappets. The unique design delivers superior tappet life in performance applications. Set of 4.

18572-13

$284.95

Fits ’17-later Milwaukee-Eight® Engine equipped models, ’00’22 XL and XR models and ’99-’17 Twin Cam-equipped models.

C. SCREAMIN’ EAGLE PERFORMANCE VALVE SPRING KIT 2

This performance beehive-shaped Valve Spring Kit will permit the Sportster® engine to rev to 7000 RPM. The unique ovate wire yields increased performance from a compact spring design. The installed spring pressure is increased to 208 lbs and allows a maximum lift of .590". Complete kit includes springs, upper collars and keepers and lower collars with integral valve seals.

18013-03A

$199.95

Fits ’04-’22 XL, XR and ’05-’17 Twin Cam-equipped models. Does not fit FXDLS, FLSS, FLSTFBS or Screamin’ Eagle Performance Heads with .3125" diameter valves.

SCREAMIN’ EAGLE® 301

302 SCREAMIN’ EAGLE®

Sportster® Stage IV Upgrade

SCREAMIN’ EAGLE® SPORTSTER® STAGE IV KIT –1200CC TO 1200CC 2

Maximize the horsepower and torque available for your street compliant Sportster® model. This complete engine package includes all the components you need to build a high-performance ride while still retaining the original factory warranty. Installation does not require removal of the powertrain from the chassis. 50-State U.S. EPA compliant. Pending regulatory approval for ’20-’22 models. Refer to the product information at www.H-D.com/shop for status.

Kit includes:

CNC-Ported Cylinder Heads with Performance Valve Springs Screamin’ Eagle XL SE-585 Cams Forged Hi-Compression 10.5:1 Pistons and Rings 58mm Throttle Body and Intake Manifold Top End Gasket Kit

Fits ’14-’22 XL1200 models. Requires separate purchase of 58mm compatible accessory air cleaner. All models require ECM calibration for proper installation. ’ 17-later models require recalibration with Screamin’ Eagle Pro Street Tuner (sold separately). Pending approval for use in California on 21 -later models. Refer to H-D.com/shop for status. 92500042 Black Non-Highlighted Heads. $3,149.95

air filters are engineered to improve airflow for increased horsepower and quicker acceleration. K&N filters provide excellent filtration, and because they are washable and reusable, you can clean the filter whenever conditions demand. Designed as direct replacements for specified fitments.

1. 29400020 High-Flow – Multi-fit. $89.95 Fits ’07-’22 XL, ’99-’07 Dyna®, ’00-’15 Softail® and ’99-’07 Touring models equipped with High-Flow Air Cleaner Kits. Replacement for P/N 29442-99E.

2. 29400355 High-Flow – Multi-fit. $199.95 Fits ’18-later Softail and ’17-later Touring and Trike models equipped with round High-Flow Air Cleaner P/N 29400355 or 29400356.

3. 29400019 High-Flow – Touring. $89.95 Fits ’16-’17 Softail and ’08-’16 Touring and Trike models equipped with High-Flow Air Cleaner Kits. Replacement for P/N 29244-08.

4. 29400247 High-Flow – Wedge Milwaukee-Eight® Engine. $109.95 Fits '17-'24 Touring and '17-later Trike models equipped with Wedge High-Flow Air Cleaner Kit P/N 29400245 or 29400246.

5. 29400065 Extreme Billet. $109.95 Fits ’15- 20 XG, ’16- 17 Softail and 08-’16 Touring and Trike models equipped with Extreme Billet Agitator and Chisel Air Cleaner Kits.

5. 29400359 Extreme. $109.95 Fits ’18-later Softail and ’17-later Touring and Trike models equipped with round High-Flow Air Cleaner P/N 29400357.

5. 29400118 Extreme Billet & Rail. $109.95 Fits ’07-’22 XL, ’08-’17 Dyna and ’08-’15 Softail and models equipped with Extreme Billet Chisel and Agitator or Rail Collection Air Cleaner Kits.

6. 29400022A Ventilator – Multi-fit. $89.95 Fits models equipped with Twin Cam Ventilator and Extreme Billet Ventilator Performance Air Cleaner Kits. Replacement for P/N 29670-09.

7. 29400293 Ventilator –Milwaukee-Eight Engine. $89.95 Fits ’18-later Softail, ’17-later Touring and Trike models equipped with Ventilator Air Cleaner P/N 29400298 or 29400299.

8. 29424-05B Heavy Breather –Multi-fit, Chrome. $109.95 Fits models equipped with Heavy Breather Kit P/N 29098-09, 29299-08, 29080-09 or 29264-08.

8. 29702-08B Heavy Breather –Touring, Chrome. $109.95 Fits models equipped with Heavy Breather Kit P/N 29006-09B, 29253-08B, 29000065 or 29400105. 29400297 Heavy Breather – Touring, Black. $134.95 Fits ’16-’17 FXDLS and models equipped with Heavy Breather Kit P/N 29006-09B, 29253-08B, 29000065 or 29400105.

9. 29400141 Heavy Breather Elite, Chrome. $129.95 Fits models equipped with Screamin’ Eagle® Heavy Breather Elite Performance Air Cleaner Kit P/N 29400407 and 29400406

27300139 Heavy Breather Elite, Black. $139.95 Replacement air filter for models equipped with Screamin’ Eagle Heavy Breather Elite Performance Air Cleaner Kit P/N 29400285.

10. 29400276 Heavy Breather –Milwaukee-Eight Engine, Black. $134.95 Fits '18-'24 Softail, '17-'25 Touring and Trike models with Heavy Breather Kits P/N 29400263 or 29400264 and '22later Revolution® Max models equipped with Heavy Breather P/N 29400440 or 29400442.

11. 29400275 Heavy Breather –Milwaukee-Eight Engine, Chrome. $134.95 Fits '18-'24 Softail, '17-'25 Touring and Trike models with Heavy Breather Kits P/N 29400263 or 29400264 and '22later Revolution Max models equipped with Heavy Breather P/N 29400440 or 29400442.

304 SCREAMIN’ EAGLE®

Spark Plugs

A. SCREAMIN’ EAGLE® PERFORMANCE SPARK PLUGS 2

Screamin’ Eagle Spark Plugs feature double platinum coating for superior erosion resistance and extended life. The “V” trimmed ground electrode reduces shrouding of the flame front to promote flame propagation, and the fine wire center electrode enhances startups and ignitability. Screamin’ Eagle Plugs feature Ribbed Core Technology (RCT) that provides resistance to fouling, and are designed with Original Equipment-style noise suppression to prevent electrical interference with radios and CB communication equipment. Works great in racing applications where rich air/fuel conditions are required. Unique style with Screamin’ Eagle logo. Sold in pairs.

Standard Compression Applications

Designed for modified engines including performance carburetors, high-flow air cleaners, camshafts, exhaust systems and ignition systems in conjunction with stock compression ratios.

31600106 Standard Compression Applications. $29.95

Fits ’99-later Twin Cam-equipped models, and ’86-later Evolution® Sportster® 883, 1100 and 1200 models.

31600085 Standard Compression Applications. $29.95

Fits ’15-’20 XG models and ’17-later Milwaukee-Eight® engine equipped models (including Stage I, II, III and IV Upgrades).

31600180 $39.95 Fits ’21-later Revolution® Max engine equipped models.

High Compression Applications

These plugs are designed for high-performance applications involving modifications in high-flow air cleaners, camshafts, exhaust, performance heads, ignition components, higher compression ratios above Original Equipment configurations or engines specific for racing applications.

31600105 High Compression Applications. $29.95

Fits ’99-later Twin Cam-equipped models. ’86-’22 XL and XR and Evolution 1340 models equipped with Screamin’ Eagle Performance Cylinder Heads.

B. SCREAMIN’ EAGLE 10MM PHAT SPARK PLUG WIRES –CUT TO LENGTH

Fat 10mm plug wires add dimension and style to your ride. Screamin’ Eagle boot design and suppression core wires ensure solid connection and maximum voltage transfer between coil and plugs. Screamin’ Eagle script printed along the wire to add style.

32095-98B Black.

$39.95

Multi-Fit – Cut to length. Fits ’86-’03 XL models (except XL1200S), ’91-’98 Dyna® models, ’85-’99 Softail® models and ’80-’84 Touring models.

to ignite and clear the plug.

SCREAMIN’ EAGLE® 305

C. SCREAMIN’ EAGLE® 10MM PHAT SPARK

Touring models.

32093-98B Black. $39.95

31964-89C Orange. $39.95

Fits ’18-later Softail models.

31600111A Black. $62.95

31600113A Orange. $62.95

31600112A Red. $62.95

Fits ’00-’17 Softail models (except FXCW, FXCWC, FXS and ’13-’16 FXSB models).

31907-08A Black. $39.95

32360-00C Orange. $39.95

Touring (except ’23-later FLHXSE, FLTRXSE, ’24-later FLHX, FLTRX, FLTRXSTSE and ’25-later FLHXU). and Trike models.

31600108 Black.

306 SCREAMIN’ EAGLE®

SCREAMIN’ EAGLE® CRATE ENGINE & DRIVE TRAIN COMPONENTS

Fresh from the factory, Harley-Davidson® Crate Engines are the ideal platform for building your high-performance ride. And once you’ve put your heart and soul into achieving just the type of horsepower and torque numbers you crave, we offer everything you need to get all that power to the pavement.

SCREAMIN’ EAGLE® 307

A. SCREAMIN’ EAGLE® 135CI STAGE IV PERFORMANCE CRATE ENGINE 5 For the rider demanding no-compromise performance. This is the most displacement, and the most power, ever created by Harley-Davidson for a street-compliant crate performance engine. Engineered by the pros at Harley-Davidson and built from the bottom up in Milwaukee, this street-tuned 135-cubicinch Screamin’ Eagle Crate Engine is designed designed to deliver instant arm-stretching torque through the entire rpm range. Made for riders seeking maximum displacement, compression, and flow, it delivers 144 horsepower and 149 ft-lb of torque to the rear wheel! The 135ci engine compression ratio is 11.6:1. Exclusive 135 and Stage IV badging on the cylinder heads, and timer cover to highlight the powerplant. This street-ready performance motor features the finest Screamin’ Eagle components. Many of these new components were informed by extensive testing by the Harley-Davidson Factory Racing Team for the King of the Baggers racing series. The 135ci Crate engine consists of: All-new Screamin’ Eagle Extreme CNC-ported cylinder heads, new SE8-550 high-lift cam, new high-compression forged pistons, 68mm throttle body and new CNC-machined Extreme Flow 68mm intake manifold, high-performance cam bearing, high-performance tappets, new patent-protected 4.31" steel sleeve cylinders, 4 5/8" flywheel, 6.8 g/sec fuel injectors, and Screamin’ Eagle Pro Billet Cam Plate and Oil Pump.

• We’ve done your homework. Engineered and tested as a complete collection of high-performance components by the Screamin’ Eagle pros at Harley-Davidson. This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Ready for bolt-in installation in the Original Equipment-style chassis of your Touring bike.

• No special fabrication or engine-mount relocation is required.

• Factory assembled at the Powertrain Operations facility in Milwaukee, Wisconsin.

• Screamin’ Eagle products are not available for sale and are not street legal in all countries. Please contact your local dealer for more information.

Fits '26-later Touring, ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX, and FLTRXSTSE and ’25-later FLHXU models. Requires separate purchase of Head Pipe P/N 65600177. Requires ECM recalibration with

308 SCREAMIN’ EAGLE®

A. SCREAMIN’ EAGLE® 135CI STAGE IV

PERFORMANCE CRATE ENGINE - AIR/OIL COOLED 5

For the rider demanding for no-compromise performance. This is the most displacement, and the most power, ever created by Harley-Davidson for a street-compliant crate performance engine. Engineered by the pros at Harley-Davidson and built from the bottom up in Milwaukee, this street-tuned 135-cubicinch Screamin’ Eagle Crate Engine is designed to run with a wide-open throttle at high engine speeds and provide instant passing power from cruising speed. Made for riders seeking maximum displacement, compression, and flow, it delivers 143 ft-lb of torque to the rear wheel as soon as the throttle is cranked. Stage IV equipped engine includes 135 Stage IV badging on the cylinder heads and timer cover to highlight the powerplant. This street-ready performance motor features the finest Screamin’ Eagle components: Screamin’ Eagle Extreme CNC-ported cylinder heads, SE8-517 high-lift cam, new high-compression forged pistons, high-performance cam bearing, high-performance tappets, patent-protected 4.31" steel sleeve cylinders, new 4 5/8" flywheel, new 68mm throttle body and CNC-machined 68mm intake manifold, new 6.8 g/sec fuel injectors, and Screamin’ Eagle® Pro Billet Cam Plate and Oil Pump.

• We’ve done your homework. Engineered and tested as a complete collection of high-performance components by the Screamin’ Eagle pros at Harley-Davidson. This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Ready for bolt-in installation in the Original Equipment-style chassis of your Touring bike

• No special fabrication or engine-mount relocation is required

• Factory assembled at the Powertrain Operations facility in Milwaukee, Wisconsin

• Choice of Black or Chrome finish

Fits ’21-’25 Touring models equipped with Air/Oil-Cooled Milwaukee-Eight® engine. Does not fit Trike models. Requires separate purchase of Head Pipe P/N 65600177 and Oil Cooler Fan Assist P/N 62700204 or Fan for Factory Oil Cooler P/N 26800195. All models require ECM recalibration with Screamin’ Eagle Pro Street Tuner for proper installation. Does not fit California models.Does not fit Center Cooled models.

Notice:

SCREAMIN’ EAGLE® 309

inch Screamin’ Eagle Crate Engine is designed to run with a wide-open throttle at high engine speeds and provide instant passing power from cruising speed. Made for riders seeking maximum displacement, compression, and flow, it delivers 143 ft-lb of torque to the rear wheel as soon as the throttle is cranked. Stage IV equipped engine includes 135 Stage IV badging on the cylinder heads and timer cover to highlight the powerplant. This street-ready performance motor features the finest Screamin’ Eagle components: Screamin’ Eagle Extreme CNC-ported cylinder heads, SE8-517 high-lift cam, new high-compression forged pistons, high-performance cam bearing, high-performance tappets, patent-protected 4.31" steel sleeve cylinders, new 4 5/8" flywheel, new 68mm throttle body and CNC-machined 68mm intake manifold, new 6.8 g/sec fuel injectors, and Screamin’ Eagle Pro Billet Cam Plate and Oil Pump.

• We’ve done your homework. Engineered and tested as a complete collection of high-performance components by the Screamin’ Eagle pros at Harley-Davidson. This combination is designed for wide open throttle along with high end RPMs and a significant torque increase from a cruising speed.

• Ready for bolt-in installation in the Original Equipment-style chassis of your Touring bike

• No special fabrication or engine-mount relocation is required

• Factory assembled at the Powertrain Operations facility in Milwaukee, Wisconsin

5

• Choice of Black or Chrome finish Fits ’21-’25 Touring models equipped with Twin-Cooled™ Milwaukee-Eight® engine. Does not fit Trike models. Requires separate purchase of Head Pipe P/N 65600177. All models require ECM recalibration with Screamin’ Eagle Pro Street Tuner for proper installation. Does not fit California models. Does not fit Center Cooled models. 16200787 Black. $8,149.95 16200785 Chrome. $8,149.95

310 SCREAMIN’ EAGLE®

Milwaukee-Eight® Engines

A. SCREAMIN’ EAGLE® MILWAUKEE-EIGHT® ENGINE

131 CI PERFORMANCE CRATE ENGINE 5

Leave other riders in the dust with the biggest, most powerful street-compliant crate performance engine Harley-Davidson has ever created. Built from the bottom up in Milwaukee, this street-tuned 131-cubic-inch Screamin’ Eagle Crate Engine is designed to run with a wide-open throttle at high engine speeds and provide instant passing power from cruising speed. Made for riders seeking maximum displacement, compression and flow, it delivers 135 ft-lb of torque to the rear wheel as soon as the throttle is cranked. Stage IV equipped engine includes 131 Stage IV badging on the cylinder heads and timer cover to highlight the powerplant. Ready for bolt-in installation in the Original Equipment-style chassis of your Softail® bike. No special fabrication or engine-mount relocation is required. Engine features one-year manufacturer’s warranty for unmatched confidence.

49-State U.S. EPA Compliant on select ’18-later Softail® Models. Refer to www.H-D.com/Shop for status.

Performance components include:

•Engraved CNC-ported cylinder head with CNCmachined chamber and 1mm larger valves

• SE8-517 high-lift cam

• High-compression 10.7:1 forged pistons.

• High-performance cam bearing

• High-performance tappets

• Patent-protected 4.31" steel sleeve cylinders.

• 64mm throttle body and cast manifold

• 5.5 g/sec fuel injector

Fits 18-’24 Softail models. FXFB and FXFBS models require separate purchase of Screamin’ Eagle Softail High-Flow Exhaust System P/N 64900828 or 64900829. ’18 107ci models require separate purchase of SE High-Capacity Clutch Plate Kit P/N 37000258. FXDR114 models require the separate purchase of 65600300. All models require ECM calibration with Screamin Eagle Pro Street Tuner for proper installation. Does not fit California models.

16200341 Black & Chrome. $7,449.95

311 SCREAMIN’ EAGLE®

Notice:

with the ultimate large bore Screamin’ Eagle 58mm Throttle Body (18% larger than stock), this engine is capable of producing 106 horsepower and 117 lb-ft of torque at the rear wheel. Engine features one-year manufacturer’s warranty. For best performance results, we recommend combining this engine with your choice of Screamin’ Eagle 58mm HighFlow Air Cleaner and the Screamin’ Eagle High Flow Exhaust System P/N 64800022.

This engine is 50-State U.S. EPA compliant when used with Original Equipment mufflers or the Screamin’ Eagle Street Performance Exhaust System P/N 64800022. All models require ECM calibration (priced separately). U.S. delivered engines include Manufacturer’s Statement of Origin (MSO).

Developed and tested in Milwaukee, this motor features the finest Screamin’ Eagle components:

– 4.060 big-bore cylinders.

– 4-5/8" stroke SE Pro stroker flywheel and rod assembly.

– 10.5:1 high-compression nickel-plated forged pistons with Teflon® coated skirt.

– Titanium SST piston rings.

– SE-259E high-lift cams.

– Perfect-Fit pushrods.

– SE high-performance lifters.

– CNC-ported MVA heads with automatic compression release.

– Screamin’ Eagle Pro High-Flow 58mm EFI Throttle Body, high-flow injectors and manifold clamps.

– Machined lower rocker boxes for valve spring collar clearance.

– Factory-machined engine cases.

– Unique piston oilers for stroker clearance.

– Screamin’ Eagle inner crankcase full complement cam needle bearings.

– SE Lefty high-performance crankcase output bearing and nitride bearing race.

– SE Performance spark plugs.

– 120ST cam cover and cylinder head medallions.

19221-15

$7,099.95 Fits 50-state ’10-’16 Touring models. Does not fit TwinCooled™ models. Does not fit Trike. ’10 Touring models require Screamin’ Eagle Big Twin Compensator Kit P/N 40100061. All models require ECM calibration for proper installation. ’10-’13 Touring models can be programmed by Dealer (sold separately). ’14-’16 Touring models can be calibrated using the Screamin’ Eagle Pro Street Tuner (sold separately).

312 SCREAMIN’ EAGLE®

Race Developed Parts

A. SCREAMIN' EAGLE® RACING PRO BILLET CLUTCH BASKET – 46T

A race-proven component for your high-performance Milwaukee-Eight® engine. This Screamin' Eagle Racing Pro Billet Clutch Basket was developed by the Harley-Davidson Factory Race Team competing in the Mission King of the Baggers series. Precision CNC machined from premium 7075-T6 aluminum for superior strength and durability.

• CNC machined from 7075-T6 aluminum for superior strength and durability.

• Hard anodized finish for superior wear resistance.

• Assemble to a new ring gear and bearing enables quicker installation.

• Laser etched Screamin' Eagle logo.

37000402A $999.95

Fits '17-later models equipped with Milwaukee-Eight engines.

B. SCREAMIN’ EAGLE MILWAUKEE-EIGHT

– HEADBOLT KIT 2

Details matter when building a high-performance engine. Details like these Screamin’ Eagle Milwaukee-Eight Head Bolts – made from 8740 chromoly to be 23 percent stronger than stock bolts. The ideal upgrade for big-displacement and highcompression racing applications or Stage III or Stage IV builds. Lock down your top end, for the long run.

• Black oxide finish with Screamin Eagle logo provides corrosion resistance and showcases performance.

• Premium 8740 chromoly steel bolts provide a 23% increase in ultimate strength and 23% increase in yield strength compared to Original Equipment head bolts for desirable clamp load on a higher-compression engine.

• Cost savings – these bolts may be reused if the top end is disassembled for upgrades or service

• Perfect upgrade during a Screamin Eagle Stage III or Stage IV installation.

10400069

Fits 17-later Milwaukee-Eight engines.

SCREAMIN’ EAGLE® 313

Developed Parts C. SCREAMIN’ EAGLE® RACING

from

on gears and shafts ensure race-tough strength and durability. You’ll enjoy the smooth shifting performance and know this transmission is built for extreme performance in mind.

• Bolt-in installation.

• Super premium heat treated and shot peened gears ensure race-tough strength and durability.

• Torque capacity increased by +25% over the Original Equipment transmission.

• Smooth gear engagement for quicker shifts.

• Back cut gears and shift lug/pockets undercut for improved engagement and reduced friction.

• Upgraded bearings Screamin’ Eagle branding on bearing door (P/N 36300037 only).

• Installation kit (P/N 36300043) includes gaskets, O-rings, main drive seal and bearing, and inner primary bearing race (sold separately).

• Transmission gears and shafts may have a blue coating. This blue coating is an manufacturing aid and will not affect King 6 Transmission or Oil Performance. Upon first fluid change the oil may have a slight discoloration.

36300041 $3,495.95

Fits ’23-later Center-Cooled Touring models and ’25-later Softail® models. Installation requires separate purchase of Gasket Installation Kit P/N 36300043.

36300037 $3,495.95

Fits ’07-’24 Touring, ’07-’24 Softail and ’06-’17 Dyna® models. Does not fit ’23-Later Center-Cooled Touring models. Installation requires separate purchase of Gasket Installation Kit P/N 36300043.

D. SCREAMIN’ EAGLE RACING GASKET INSTALLATION KIT FOR KING 6 TRANSMISSIONS Installation kit includes gaskets, O-rings, main drive seal and bearing, and inner primary bearing race.

36300043 $79.95

Required for installation of Screamin’ Eagle King-6 transmission P/N 36300037 or 36300041. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets

NOTE: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Blueing is caused by tuning characteristics, cam timing, carburetor jetting, over-heating, etc. and is not caused by defective manufacturing.

314 SCREAMIN’ EAGLE®

Clutch & Drivetrain

A. SCREAMIN’ EAGLE® HIGH CAPACITY CLUTCH KIT –

MILWAUKEE-EIGHT® ENGINE

The Screamin’ Eagle High Capacity Clutch Kit increases the drivetrain’s ability to reliably support high torque applications without significantly increasing lever effort. Designed to fit in the stock clutch basket, this kit provides smooth shifting, progressive engagement, and works with the factory Assist and Slip clutch system to keep clutch lever effort similar to the stock levels. Kit contains 10 fiber clutch plates and 10 contact plates – one more than Original Equipment – and 3-1200 Newton clutch springs. This combination provides 11% more clutch surface area for greater power handling capability.

37000287

$294.95 Fits ’18-later Softail® and ’17-later Touring models.

B. SCREAMIN’ EAGLE HIGH CAPACITY CLUTCH PLATE KIT – MILWAUKEE-EIGHT ENGINE

Replacement clutch plates for the Screamin’ Eagle High Capacity Clutch Kit P/N 37000287. Kit includes 9 fiber friction plates and 10 contact plates.

37000258 $249.95 Fits ’18-later Softail and ’17-later Touring models.

C. MILWAUKEE-EIGHT ENGINE CLUTCH SPRINGS – 1275N

High-tension springs are engineered to add additional clutch capacity in high torque and high horsepower applications. Kit includes 3-1275 Newton (N) coil springs, and is designed to complement the Screamin’ Eagle High Capacity Clutch Plate Kit P/N 37000258. When combined with the High Capacity Clutch Plate Kit, torque capacity is increased to the maximum level available. Installation will increase capacity and lever effort. Springs can be installed without removing the outer primary cover.

37000286 $39.95

Fit’s ’18-later Softail and ’17-later Touring models.

D. MILWAUKEE-EIGHT ENGINE CLUTCH SPRINGS – 1200N

Replacement clutch springs for the Screamin’ Eagle High Capacity Clutch Kit P/N 37000287. Kit includes 3-1200 Newton (N) coiled clutch springs. Installation of these springs with Original Equipment clutch plates will increase clutch capacity and lever effort. Springs can be installed without removing the outer primary cover. Included in MilwaukeeEight® Stage lll and lV Kits.

37000288 $39.95

Fit’s ’18-later Softail and ’17-later Touring models.

SCREAMIN’ EAGLE® 315

and large displacement engines. Designed to outperform the Original Equipment compensator, this unit helps protect the engine and driveline components during harsh drag race launches. Compensator features improved oil passages, oil deflectors and a needle bearing thrust washer that improves the overall operation of these components.

42200064A $349.95 Fits ’12-’13 Dyna®, ’12-’13 Softail® (except FXCW, FXCWC, FXSB, FXSBSE and ’09 FXSTSSE), ’11-’13 Touring and ’09-’13 Trike models. Original Equipment on ’14-’17 Dyna, Softail and ’14-’16 Touring models. Requires separate purchase of Installation Adhesive Kit P/N 11100088.

40100061

$459.95

Fits ’06-’11 Dyna, ’07-’11 Softail (except FXCW and FXCWC), ’07-’10 Touring, and ’07-’09 CVO™ models (except ’09 FXSTSSE) models. Does not fit Trike. Requires separate purchase of Installation Adhesive Kit P/N 11100088. Kit includes Rotor Assembly P/N 30041-08. Installation on ’06 Dyna models require separate purchase of ’07-style stator.

42200095A

$349.95

Fits ’08-’12 FXCWC and ’09 FXSTSSE models and ’13-later FXSB models. If P/N 40274-08A has been installed previously, the rotor shell, P/N 30041-08A is not required.

F. SCREAMIN’ EAGLE VARIABLE PRESSURE CLUTCH 2 Get more performance from the Original Equipment clutch. The Screamin’ Eagle Variable Pressure Clutch is designed to help put the added power from a Screamin’ Eagle Stage Kit to the pavement. This bolt-on kit harnesses the centrifugal force of spinning weights to increase the clutch capacity as engine speed increases. The mechanism applies increasing pressure to the stock clutch pressure plate as RPM rises. The result: high torque-handling capabilities without increasing clutch lever effort at idle. The Variable Pressure Clutch also provides smoother clutch disengagement at lower speed. Kit fits behind most stock derby covers with no modifications. See installation manual for additional accessory derby cover fitment information.

To match the performance demands of your engine, team the Variable Pressure Clutch with your choice of clutch diaphragm springs. We recommend the higher-capacity Screamin’ Eagle Diaphragm Spring P/N 37951-98 for major performance upgrades.

37000121A $374.95 Fits ’99-’17 Evolution® 1340 and Twin Cam-equipped models. Will not fit ’16-later Touring and Trike models, ’15-later FLHTCUL or FLHTKL models or ’07-later Touring or Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438. Will not fit ’13-later CVO models with hydraulic actuated clutch, ’16-’17 FXDLS, FLSS and FLSTFBS, or ’14-later Touring and Trike models equipped with Screamin’ Eagle A&S Clutch Kit P/N 37000026. Derby Covers P/N 25001-03, 25441-04A, 25770-99, 25331-10, 25339-10, 25700250 and 25700062 require Spacer Kit P/N 37000123. Does not fit Derby Covers P/N 25347-02 or 25345-01.

Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.

316 SCREAMIN’ EAGLE®

Clutch & Drivetrain

A. SCREAMIN’ EAGLE® TWIN CAM PERFORMANCE ASSIST AND SLIP (A&S) CLUTCH KIT

2

Developed for the high-thrust 110CI engine featured as Original Equipment on ’14-later CVO™ models, this A&S clutch provides significantly increased torque-handling capacity (135lb/ft). Clutch is designed to improve engagement grip and provides minor slippage during downshifting to reduce shock to the power train. Reduces hand lever pull effort by over 1 pound. Complete kit features improved clutch plates for enhanced wear resistance and is the perfect addition when installing a high-output Screamin’ Eagle Stage Kit.

37000026

$437.95

Fits ’14-’16 Touring and Trike models with hydraulic clutch actuator. Original Equipment on FXDLS, FLSS, FLSTBS and FXSE models.

B. SCREAMIN’ EAGLE PERFORMANCE CLUTCH FRICTION DISC KIT

2

Newly developed friction material delivers longer life than Original Equipment friction discs. Kit includes new precisionmachined flat steel plates. This Friction Disc Kit is a perfect match for the Screamin’ Eagle Twin Cam Performance Race Clutch Hub Kit P/N 37976-08.

37980-10

$229.95

Fits ’99-’17 Twin Cam-equipped models and ’98-’99 Evolution® 1340-equipped models. Will not fit ’13-’16 CVO™ Touring models with hydraulic actuated clutch or, ’15-’16 FLHTCUL and FLHTKL, ’16-’17 FXDLS, FLSS, FLSTFBS, FXSE or ’13-’16 CVO Touring models with hydraulic actuated clutch, ’15-’16 FLHTCUL and FLHTKL or ’14-’16 Touring and Trike models equipped with Screamin’ Eagle A&S Clutch Kit P/N 37000026.

C. HEAVY DUTY CLUTCH SPRING FOR STOCK CLUTCH 2

37951-98

Fits ’99-’17 Twin Cam-equipped models and ’98-’99

$39.95

Evolution 1340-equipped models. Will not fit ’16-’17 FXDLS, FLSS, FLSTFBS and FXSE or ’13-’16 CVO Touring models with hydraulic actuated clutch, or ’15-’16 FLHTCUL and FLHTKL, ’14-’16 Touring and Trike models equipped with Screamin’ Eagle A&S Clutch Kit P/N 37000026.

D. SCREAMIN’ EAGLE PERFORMANCE CLUTCH KIT 2

Performance Clutch Kit converts the 8-plate clutch to a 9-plate design. The surface area is increased by 13% and the spring rate is increased by 10% for a combination that can handle over 115 ft-lbs of torque at the crank, a 23% increase over the stock-rated capacity. Kit includes Kevlar® fiber-based friction discs and performance clutch spring.

38002-04

$229.95 Fits ’91-’22 XL and ’94-’97 Evolution 1340-equipped models.

E. SCREAMIN’ EAGLE PERFORMANCE SLIPPER CLUTCH FOR VRSC™ MODELS 2

This clutch offers reduced lever effort and improved performance. The unique “slip and assist” ramp system opens the two halves of the clutch hub slightly during high loads to the drivetrain, allowing a moderate slip that reduces shock to the drivetrain during rapid downshifting. The resulting reduction in wheel hop allows maximum contact between the tire and the road in wet or slippery conditions. Clutch lever effort is also reduced by 20% in 1130cc and 30% on 1250cc applications.

37938-08KA $263.95 Fits ’02-’07 VRSC™ models.

A. SCREAMIN’ EAGLE TWIN CAM PERFORMANCE ASSIST AND SLIP CLUTCH KIT

SHORT & LONGBLOCK PROGRAM

When it comes time to repower your motorcycle, the first stop should be your local Harley® Dealer. They can set you up with a replacement shortblock or longblock engine that is manufactured from 100% new Original Equipment parts and subjected to the same rigorous testing as all Harley® engines. Plus, all longblock engines feature a one-year factory warranty and your original VIN stamped on the case. F. SHORTBLOCK ASSEMBLY

The perfect starting point for building the engine of your dreams. Engine shortblocks are manufactured and assembled on Harley-Davidson’s main engine assembly line for exceptional quality and reliability. Shortblock cases, flywheels, bearings and rods are preassembled and ready for your custom build. Kit includes current spec Original Equipment cam plate, oil pump, cam drive components and the gaskets, seals and most of the hardware required to complete the engine and install it (not all components shown). You select your cylinders, heads, cams, covers and other top-end components. Choose one of the Screamin’ Eagle Stage kits to incorporate reliable performance and pick from our decorative engine covers to customize the look. Shortblock Assemblies are stamped with a new VIN and include MSO (Manufacturers Statement of Origin). The MSO is for Domestic only. Kits ship directly from the factory within 3-5 days. Assembly comes stamped with a new VIN on Twin Cam Kits. (For VIN matching shortblock assemblies see the appropriate Service Parts Catalog.)

Twin Cam Engine

16200070 Black 96CI/103CI. $3,249.95 Fits ’07-’17 Dyna® (except FXDLS), and ’07-’16 Touring and Trike models (except CVO™ models).

16200071 Black 96CI/103CI. $4,199.95 Fits ’07-’17 Softail® models (except FLSS, FLSTFBS and CVO). Milwaukee-Eight® Engine (not shown)

See your Dealer for details.

NOTE: Replacement engines must be re-fitted with emission control devices and systems appropriate for the vehicle model and model year in order to ensure emissions compliance. Failure to do so constitutes tampering under U.S. EPA guidelines and can lead to substantial fines and penalties.

Legal for use on public roads only when installed in the specified models. Not legal for use on public roads when installed in models other than the ones specified and not eligible for the P&A warranty when installed in models other than the ones specified. Please see the Parts and Accessories warranty statement and your dealer for more information. Street legal and/or street compliant statements refer to product meeting 50-State emissions and noise standards in the United States. The street legal and/or street compliant statements may not apply to markets outside of the United States.

HARLEY-DAVIDSON ® COLLECTIONS

322 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. REDLINE COLLECTION – BLACK ANODIZED

Curved spokes machined within Redline Collection powertrain covers convey aggressive speed, the perfect accessory for your high-performance bike. Crafted in forged billet aluminum with a durable black anodized finish with a Bar & Shield logo on center. Includes mounting hardware. Complete this custom look with additional accessories from the Redline Collection.

25701632 Derby Cover.

$169.95

Fits '16-later Touring (except '25-later FLTRXRRSE) and Trike and '15-later FLHTCUL and FLHTKL models. Also fits '07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701633 Derby Cover. $169.95

Fits '18-later FLSB and '19-later Softail ® models. Also fits '18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25701782 Timer Cover.

$79.95 Fits '23-laterTouring models and '25-later Softail ® models.

B. REDLINE COLLECTION – BLUE ANODIZED

Curved spokes machined within Redline Collection powertrain covers convey aggressive speed, the perfect accessory for your high-performance bike. Crafted in forged billet aluminum with a durable bright blue anodized finish for an eye-catching color contrast with a Bar & Shield logo on center. Includes mounting hardware. Complete this custom look with additional accessories from the Redline Collection.

25701783 Derby Cover. $169.95

Fits '16-later Touring (except '25-later FLTRXRRSE) and Trike and '15-later FLHTCUL and FLHTKL models. Also fits '07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701784 Derby Cover. $169.95

Fits '18-later FLSB and '19-later Softail models. Also fits '18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25701863 Timer Cover. $79.95

Fits '23-later Touring models and '25-later Softail ® models.

C.REDLINE COLLECTION – RED ANODIZED

Curved spokes machined within Redline Collection powertrain covers convey aggressive speed, the perfect accessory for your high-performance bike. Crafted in forged billet aluminum with a durable bright red anodized finish for an eye-catching color contrast with a Bar & Shield logo on center. Includes mounting hardware. Complete this custom look with additional accessories from the Redline Collection.

25701634 Derby Cover. $169.95

Fits '16-later Touring (except '25-later FLTRXRRSE) and Trike and '15-later FLHTCUL and FLHTKL models. Also fits '07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701635 Derby Cover. $169.95

Fits '18-later FLSB and '19-later Softail models. Also fits '18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25701781 Timer Cover. $79.95 Fits `23-later Touring models and '25-later Softail ® models.

ENGINE TRIM 323

324 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. SWITCHBACK™ COLLECTION — BLACK ANODIZED

Put performance first with Switchback Collection accessories. This forged billet aluminum cover features machined textured details protected with a durable black anodized finish. These lightweight designs won’t slow you down. Durable black anodized finish with machined textured details for added contrast. Authentic Bar & Shield logo. Includes mounting hardware. Complete this custom look with additional accessories from the Switchback Collection.

1. 25701519 Derby Cover. $169.95 Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

2. 25701521 Derby Cover. $169.95 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

3. 25600165 Timer Cover. $74.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models (except ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE).

B SWITCHBACK COLLECTION — CLEAR ANODIZED

Put performance first with Switchback Collection accessories. This forged billet aluminum cover features machined textured details protected with a durable anodized finish. These lightweight designs won’t slow you down. Durable dual-anodized black and raw aluminum finish with machined textured details for added contrast. Authentic Bar & Shield logo. Includes mounting hardware. Complete this custom look with additional accessories from the Switchback Collection.

1. 25701520 Derby Cover. $169.95 Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

2. 25701522 Derby Cover. $169.95

Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039,Ò5701040 and 25701043.

3. 25600166 Timer Cover. $74.95 Fits ’17-’25 Milwaukee-Eight engine-equipped models (except ’23-later FLHXSE and FLTRXSE, and ’24-later FLHX, FLTRX, and FLTRXSTSE).

ENGINE TRIM 325

Derby, Timer & Air Cleaner Covers

C. EAGLE BAR & SHIELD

Two iconic symbols of freedom and strength are celebrated in this stunning decorative component. A stylized eagle and the Bar & Shield logo are laser etched in black-anodized billet aluminum to achieve brilliant highlights with sharp detail.

1. 25701551 Derby Cover. $169.95 Fits ’16-later Touring and Trike and ’15-later FLTHCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

2. 25701553 Derby Cover. $169.95 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

3. 25600175 Timer Cover. $79.95 Fits ’17-’25 models equipped with a Milwaukee-Eight® engine (except '23-later FLHXSE and FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE, '25-later FLHXU and '25-later Softail models).

4. 61100209 Fuel Cap. $129.95 Fits ’92-later XL, ’92-’17 Dyna® (except ’04-’17 FXD and FXDX, ’05-’06 FXDC and ’07 FXDSE), ’00-’25 Softail, (except FXFB, FXFBS, FXSTD and FXSTSSE) ’94-’25 Road King®, ’15-’25 Freewheeler®, and ’21-later FLHXS and FLTRXS models. Does not fit models equipped with Original Equipment locking or tethered fuel caps or Softail models with Low-Profile Chrome Fuel Tank Console P/N 71208-07. Use on ’13-’14 FXSBSE and ’21-’22FLHXSE and FLTRXSE requires removal of stock flush mount trim ring.

326 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. ADVERSARY™ COLLECTION — ANODIZED BLACK WITH ORANGE HIGHLIGHTS

A look to match your riding style – precise, refined and technical. Premium Adversary Collection accessories are crafted in forged billet aluminum with a durable dual-anodized black and orange finish for crisp contrast and colorful detail. The look is aggressive and performance driven. Step up to the next generation of customization.

1. 25701536 Derby Cover. $194.95 Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

2. 25701532 Derby Cover.

$194.95 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

3. 25600171 Timer Cover.

$79.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. (except '23-later FLHXSE and FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE, '25-later FLHXU and '25-later Softail models).

4. 25701164 Alternator Plug Cover. $89.95 Fits ’21-later Revolution® Max engine-equipped models.

5. 14101389 Clutch Medallion. $159.95 Fits ’21-later Revolution Max engine-equipped models.

6. 14101393 Timer Medallion. $79.95 Fits ’21-’25 Revolution Max engine-equipped models.

7. 14101385 Cam Sprocket Medallions. $124.95 Fits ’21-later Revolution Max engine-equipped models.

ENGINE TRIM 327

25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

3. 25600172 Timer Cover. $69.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped

328 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. ’66 COLLECTION

The look is timeless and authentic. The handcrafted style of the ’66 Collection accessories combines a durable gloss black finish with brushed aluminum highlights and on most pieces a brass-colored medallion inspired by a classic HarleyDavidson® tank emblem. Here’s an alternative to bright chrome or blacked out styles that will set your bike apart from the crowd.

1. 25701209 Derby Cover. $134.95 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043

2. 25600156 Timer Cover. $64.95

Fits ’17-’25 Milwaukee-Eight® engine-equipped models. (except '23-later FLHXSE and FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE, '25-later FLHXU and '25-later Softail models).

3. 14101443 Clutch Medallion. $134.95 Fits ’21-later Revolution® Max engine-equipped models.

4. 14101615 Cam Sprocket Medallion. $109.95 Fits ’21-later Revolution Max engine-equipped models.

ENGINE TRIM 329

330 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. EMPIRE™ COLLECTION — GLOSS BLACK

Raise the stakes. Deep grooves add eye-catching depth and detail to the rich black anodized finish on this complete collection of hand and foot controls. Executed in durable cast and billet aluminum, the Black Empire Collection adds captivating custom detail that complements other black and machine cut accessories.

25701171 Derby Cover. $174.95

Fits ’16-later Touring and Trike and ’15-later FLTHCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701177 Derby Cover. $174.95

Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25700900, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25600148 Timer Cover. $69.95 Fits ’17-’25 Milwaukee-Eight® engine equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

B. EMPIRE COLLECTION — BLACK MACHINE CUT

Raise the stakes. Milled highlights reveal gleaming billet aluminum below the rich black anodized surface, while deep grooves add eye-catching depth and detail to each component in this complete collection of hand and foot controls. Executed in durable cast and billet aluminum, the Black Machine Cut Empire Collection adds captivating custom detail that complements black or machine cut accessories.

25701173 Derby Cover. $189.95

Fits ’16-later Touring and Trike and ’15-later FLTHCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701179 Derby Cover. $189.95

Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25700900, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25600152 Timer Cover. $79.95 Fits ’17-’25 Milwaukee-Eight engine equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

C. EMPIRE COLLECTION — CHROME

Raise the stakes. Brilliant chrome highlights the deep grooves that add eye-catching depth and detail to this complete collection of hand and foot controls. Executed in durable cast and billet aluminum, the Chrome Empire Collection adds captivating custom detail that complements other chrome accessories.

25701169 Derby Cover. $174.95

Fits ’16-later Touring and Trike and ’15-later FLTHCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25701175 Derby Cover.

$174.95

Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25700900, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25600150 Timer Cover.

$69.95

Fits ’17-’25 Milwaukee-Eight engine equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

ENGINE TRIM 331

2.

Fits ’06-’17 Dyna®, ’07-’18 Softail® (except FLSB) and ’07-’15 Touring and Trike (except FLHTCUL and FLHTKL and ’07-’15 Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

3. 25600109 Timer Cover. $54.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

4. 61300928 Air Cleaner Trim $69.95 Fits ’17-later Touring (except '24-later FLHX, FLTRX, '25-later FLHXSE, FLHXU, FLTRXSE and FLTRXSTSE) and Trike models with Original Equipment air cleaner cover. Does not fit CVO™ models.

E. KAHUNA COLLECTION – CHROME Understated but powerful, the Kahuna Collection’s smooth, glass-like chrome surface is interrupted by a powerful raised bridge that draws the eye from leading to trailing edge. A red Bar & Shield logo adds the finishing touch.

1. 25700987 Derby Cover. $124.95 Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

2. 25600115 Timer Cover. $54.95 Fits ’17-’25 Milwaukee-Eight engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

332 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. HARLEY-DAVIDSON® MOTOR CO. COLLECTION –GLOSS BLACK

An aggressive twist on a classic style. The Harley-Davidson Motor Co. Collection personifies Harley style and features a rich gloss black surface, trimmed with deep-cut silver-filled lettering that surrounds a central groove. The clean design and the luxurious finish are the perfect match for blacked-out engines. Includes black zinc hardware.

1. 25701022 Derby Cover. $59.95 Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

1. 25701023 Derby Cover. $59.95

Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

1. 25701020 Derby Cover. $64.95 Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

2. 25701021 Derby Cover. $64.95 Fits ’04-’22 XL and XR models.

3. 25600135 Timer Cover. $34.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

4. 25600133 Timer Cover. $34.95 Fits ’99-’17 Twin Cam equipped models.

5. 25600134 Timer Cover. $34.95 Fits ’04-’22 XL, XR and earlier models with horizontal holes on timer cover.

6. 61301005 Air Cleaner Trim. $54.95 Fits ’18-’24 FLDE, FLHC, FLHCS, FLSL, FXLR and ’20-later FXST models with Original Equipment center bolt air cleaner cover.

334 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. WILLIE G SKULL COLLECTION – BLACK

Penned at the hand of Willie G the famous Skull Collection makes a shift to the dark side. Completely drenched in black, the raised skull and surrounding Harley-Davidson Motorcycle script adds a subtle ominous touch to your ride. The finish easily coexists alongside gloss black or wrinkle black surfaces. The complete collection of components includes matching black hardware.

1. 25700740 Derby Cover. $74.95 Fits ’16-later Touring and Trike and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

1. 25700976 Derby Cover. $74.95

Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

1. 25700742 Derby Cover. $74.95 Fits ’99-’17 Dyna®, ’00-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except ’15 FLHTCUL and FLHTKL and ’07-’15 Touring and Trike models equipped with NarrowProfile Outer Primary Cover P/N 25700385 or 25700438). Installation on ’06-’17 Dyna and ’07-later Softail, and ’07-’15 Touring and Trike models requires separate purchase of Gasket P/N 25416-99C.

2. 25700744 Derby Cover. $74.95 Fits ’04-’22 XL and XR models.

3. 25600085 Timer Cover. $39.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

4. 25600087 Timer Cover. $39.95 Fits ’99-’17 Twin Cam models.

5. 25600089 Timer Cover. $39.95 Fits ’04-’22 XL, XR and earlier models with horizontal holes on timer cover.

6. 29400345 Air Cleaner Trim. $64.95 Fits ’17-later Touring (except '24-later FLHX, FLTRX, '25-later FLHXSE, FLHXU, FLTRXSE and FLTRXSTSE) and Trike models with Original Equipment wedge shaped air cleaner cover.

7. 29400366 Air Cleaner Trim. $59.95 Fits Evolution® 1340 models, ’99-’08 Dyna. ’00-’15 Softail (except FLS, FLSS, FLSTSB, and FXS) and ’99-’13 Touring and Trike models equipped with oval-shaped Original Equipment air cleaner cover. Also fits models equipped with Screamin’ Eagle® Round High-Flow Air Cleaner Kits with separate purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim Installation Kit P/N 12400158.

ENGINE TRIM 335

models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

1. 25441-04A Derby Cover. $74.95 Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

2. 25440-04A Derby Cover. $74.95 Fits ’04-’22 XL and XR models. Includes chrome-plated stainless steel mounting hardware.

3. 25600066 Timer Cover. $39.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

6. 29417-04 Air Cleaner Trim. $59.95 Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail (except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and Trike models with Original Equipment air cleaner cover. Also fits models equipped with Screamin’ Eagle® Round HIghFlow Air Cleaner Kits with separate purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim Installation Kit P/N 12400158.

336 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. DARK CUSTOM™ LOGO COLLECTION

The famous Harley-Davidson #1 logo with a sinister twist. Machined from billet aluminum, these covers feature domed surfaces that are polished and black anodized to a rich satin sheen, and then re-machined to expose the raw aluminum. The resulting high-contrast design complements both polished and painted engine finishes.

1. 25700434 Derby Cover – Billet. $164.95 Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

1. 25700960 Derby Cover.

$164.95 Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

1. 25562-09 Derby Cover – Billet.

$164.95 Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

2. 25600064 Timer Cover – Billet.

$69.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

3. 61300057 Air Cleaner Trim – Billet.

$129.95 Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail (except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and Trike models with Original Equipment air cleaner cover. Also fits models equipped with Screamin’ Eagle® Round High-Flow Air Cleaner Kits with separate purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim

ENGINE TRIM 337

338 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. AIRFLOW COLLECTION

Shaped to cheat the wind. The polished and mirror-chromed Airflow Collection features a raised bridge with 3 laminar grooves that float over the recessed panels. The layered surfaces capture light and shadows, and frame the subtle black-filled Harley-Davidson signature. This complete collection sets the stage for your one-of-a-kind custom ride. Includes chrome-plated mounting hardware.

1. 25700505 Derby Cover. $99.95 Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

1. 25700969 Derby Cover. $99.95

Fits ’18-later FLSB and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

2. 25700504 Derby Cover. $99.95

Fits ’99-’17 Dyna®, ’00-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except FLHTCUL, FLHTKL and ’07’15 Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438). Installation on ’06-later Dyna, ’07-’18 Softail and ’07-’15 Touring and Trike models require separate purchase of Gasket P/N 25416-99C.

3. 25600099 Timer Cover. $49.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

4. 25600046 Timer Cover. $49.95 Fits ’99-’17 Twin Cam models.

5. 61400323 Air Cleaner Trim. $69.95 Fits Evolution® 1340 models, ’99-’08 Dyna. ’00-’15 Softail (except FLS, FLSS, FLSTSB and FXS) and ’99-’13 Touring and Trike models equipped with oval-shaped Original Equipment air cleaner cover. Also fits models equipped with Screamin’ Eagle® Round High-Flow Air Cleaner Kits with separate purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim Installation Kit P/N 12400158.

ENGINE TRIM 339

and ’19-later Softail® models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/N 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

1. 25340-99A Derby Cover. $79.95 Fits ’99-’00 Evolution® 1340, ’99-’17 Dyna®, ’99-’18 Softail (except FLSB) and ’99-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

2. 25600067 Timer Cover. $44.95 Fits ’17-’25 Milwaukee-Eight® engine-equipped models. Does not fit ’23-later FLHXSE and FLTRXSE, ’24-later FLHX, FLTRX and FLTRXSTSE models.

3. 32689-99A Timer Cover. $44.95 Fits ’99-’17 Twin Cam-equipped models. Includes chromeplated stainless steel mounting hardware.

4. 61300656 Air Cleaner Trim. $64.95 Fits ’17-later Touring (except '24-later FLHX, FLTRX, '25-later FLHXSE, FLHXU, FLTRXSE and FLTRXSTSE) and Trike models with Original Equipment air cleaner cover. Does not fit CVO™ models.

5. 29328-99 Air Cleaner Trim. $64.95 Fits Evolution 1340 models, ’99-’08 Dyna, ’00-’15 Softail (except FLS, FLSTSB and FXS) and ’99-’13 Touring and Trike models with Original Equipment air cleaner cover. Also fits models equipped with Screamin’ Eagle® Round High-Flow Air Cleaner Kits with separate purchase of Rain Sock Kit P/N 28728-10 or Air Cleaner Trim Installation Kit P/N 12400158.

340 ENGINE TRIM

A. MILWAUKEE-EIGHT® ENGINE COVERS –GLOSS BLACK

These engine covers are the perfect start in converting your powertrain to an elegant tuxedo black look. Manufactured from Original Equipment components to ensure a perfect fit, these covers are coated with temperature-resistant paint to ensure a long-lasting finish, and critical surfaces are masked to provide good gasket seal. Complete the look with matching primary covers, rocker housings, rocker covers, cam covers and transmission covers (sold separately).

25700491 Primary Cover. $319.95 Fits ’17-later Touring and Trike models.

25700750 Primary Cover. $349.95

Fits ’18 Softail® models (except FLSB, FXBB, FXBBS, , FXLR, FXLRS, and FXLRST).

25700913 Narrow-Profile Primary Cover. $319.95 Fits ’18-later Softail models (except FXST, FXBB, FXBBS, FXLR, FXLRS and FXLRST). 18 models (except FLSB) require separate purchase of Softail Narrow Derby Cover and required gaskets.

25700467 Cam Cover.

$159.95

Fits ’18-’24 Softail and ’17-later Touring and Trike models. Does not fit center cooled models.

25700520 Rocker Box Cover – Upper. $149.95 Fits ’18-later Softail and ’17-later Touring and Trike models (2 required).

25800055 Transmission Side Cover. $89.95 Fits ’17-’20 Touring and Trike models.

25800098 Transmission Side Cover $89.95 Fits ’18-’24 Softail and 21-later Touring and Trike models. Does not fit center cooled models.

34800031 Transmission Top Cover. $89.95 Fits ’18-’24 Softail and ’17-later Touring and Trike models. ’18later Softail models require separate purchase of gasket P/N 25700453. Does not fit center cooled models.

25700477 Derby Cover. $59.95

Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25700971 Derby Cover. $59.95

Fits ’18-later FLSB and ’19-later Softail models. Also fits ’18 Softail models equipped with Narrow Profile Primary Cover P/Ns 25701077, 25700913, 25700937, 25700941, 25701039, 25701040 and 25701043.

25600098 Timer Cover. $34.95

Fits ’17-’25 Milwaukee-Eight engine-equipped models. NOTE: Removing and installing engine covers may require purchase of new gaskets. See dealer for information.

ENGINE TRIM 341

342 ENGINE TRIM

Derby, Timer & Air Cleaner Covers

A. CLASSIC CHROME COVERS

From the design philosophy of less is more, we bring you this collection of basic chrome accessories, which provides a clean, custom look that is guaranteed to turn heads.

1. 25700388 Derby Cover.

$59.95

Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

1. 60766-06 Derby Cover. (not shown)

$69.95 Fits ’06-’17 Dyna® and ’07-’18 Softail® (except FLSB), ’07-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07’15 Touring or Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438). Does not fit with passenger footboards in the “medium” or “low” position when flipped up.

2. 34760-04 Derby Cover. $59.95 Fits ’04-’22 XL models.

3. 32679-99A Timer Cover. $34.95 Fits Twin Cam-equipped models. Includes chrome-plated stainless steel mounting hardware.

4. 60572-86 Chain Inspection Cover. $79.95 Fits ’93-’05 FXDWG and ’86-’06 FLST, FXST and FXSTS models.

ENGINE TRIM 343

Covers – Milwaukee-Eight®

or ’07-’15 Touring or Trike models with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

C. BLACK DERBY COVERS Available in your choice of wrinkle black or gloss black finish, these simple Derby Covers add a finishing touch to your blacked-out engine.

Fits ’06-’17 Dyna and ’07-’18 Softail (except FLSB), and ’07-’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models equipped with Narrow-Profile Outer Primary P/N 25700385 or 25700438). Does not fit with passenger footboards in the “medium” or “low” position when flipped up.

60713-07 Wrinkle Black. $49.95

25700020 Gloss Black. $59.95

Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

25700477 Gloss Black. $59.95 Fits ’04-’22 XL models.

34790-05 Wrinkle Black. $49.95

Fits ’09-later Touring and Trike models. 16213-10 Chrome. $59.95 16400055 Black. $48.95

E. FINNED SPARK PLUG COVERS Complete the finned look from the base of the cylinder all the way to the rocker box. These aluminum Finned Spark Plug Covers fill the spark plug pockets and complete the horizontal fin look across the top of the left-hand side of the engine. Firmly held in place by spring clips, these easy-to-install finned covers slip into position and do not require removal of the spark plugs for installation. Sold in pairs.

Fits ’17-later Milwaukee-Eight Engines. Does not fit ’23-later FLHXSE and FLTRXSE and ’24-later FLHX, FLTRX and FLTRXSTSE and '25-later FLHXU models. 25800061 Black. $74.95

346 ENGINE TRIM

Engine Covers – Twin Cam

A. TWIN CAM ENGINE COVERS – GLOSS BLACK

These engine covers are the perfect start in converting your powertrain to an elegant tuxedo black look. Manufactured from Original Equipment components to ensure a perfect fit, these covers are masked and coated with temperature-resistant paint to ensure a long-lasting finish. Complete the look with matching primary covers, rocker housings, rocker covers, cam covers and transmission covers (sold separately).

60876-11A Primary Cover. $319.95

Fits ’07-’17 Softail® models. Also fits ’06-’17 FLD and Dyna® models equipped with factory forward controls. Will not fit with Accessory Forward Controls.

60886-11A Primary Cover. $319.95

Fits ’07-’15 Touring and Trike models (except FLHTCUL and FLHTKL).

25700438 Narrow Primary Cover. $319.95

Fits ’07-’16 Touring and Trike models. Installation requires separate purchase of narrow derby cover, derby cover gasket and primary gasket. Chrome is Original Equipment on ’15-’16

FLHTCUL and FLHTKL and ’16 Touring and Trike models.

17707-11 Rocker Box Cover.

$109.95

Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and Trike models (2 required).

17709-11 Rocker Box Lower Housing. $124.95 Fits ’99-’17 Dyna, ’00-’17 Softail, and ’99-’16 Touring and Trike models (2 required).

37198-11 Cam Cover. $159.95

Fits ’01-’17 Dyna, Softail and ’01-’16 Touring and Trike models (except ’01 EFI Touring).

37193-11 Transmission Side Cover.

$119.95

Fits ’06-’17 Dyna, and ’07-’17 Softail (except FLSS, FLSTFBS, FXCW, FXCWC, FXSB and FXSE), and ’07-’16 Touring and Trike models. Does not fit models equipped with a hydraulic clutch.

25700180 Transmission Side Cover.

$99.95 Fits ’13-’16 Touring and Trike models equipped with hydraulic clutch.

37195-11 Transmission Top Cover.

$89.95 Fits ’06-’17 Dyna and ’07-later Softail and ’07-’16 Touring and Trike models.

25700020 Derby Cover. $59.95

Fits ’06-’17 Dyna and ’07-’18 Softail (except FLSB) and ’07’15 Touring and Trike models (except FLHTCUL, FLHTKL or ’07-’15 Touring or Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438).

25700477 Derby Cover. $59.95

Fits ’16-later Touring and Trike, and ’15-later FLHTCUL and FLHTKL models. Also fits ’07-later Touring and Trike models equipped with Narrow-Profile Outer Primary Cover P/N 25700385 or 25700438.

NOTE: Removing and installing engine covers may require purchase of new gaskets. See dealer for information.

ENGINE TRIM 347

Fits ’99-’17 Dyna, ’00-’17 Softail and ’99-’16 Touring and Trike models (2 required).

25364-01B Cam Cover. $199.95 Fits ’01-’17 Dyna,

60713-07

348 ENGINE TRIM

Engine Covers – Twin Cam

A. TWIN CAM ENGINE COVERS – CHROME

Dress the engine of your Twin Cam-equipped model in chrome. These chrome-plated components are manufactured to Original Equipment specifications for exact fit and finish.

Outer Primary Covers

60764-06A

Fits ’06-’17 Dyna® models with mid controls.

$399.95

60782-06A $399.95

Fits ’06-’17 Dyna models with forward controls and ’07-’17 Softail® models.

60553-07A $399.95

Fits ’07-’15 Touring and Trike models (except FLHTKL and FLHTCUL).

25700385 Narrow-Profile. $399.95

Fits ’07-’16 Touring and Trike models. Installation requires separate purchase of narrow derby cover, derby cover gasket and primary gasket. Chrome is Original Equipment on ’15-’16 FLHTCUL and FLHTKL and ’16 Touring and Trike models.

Cam Covers

25369-01B $191.95

Fits ’01-’17 Dyna, Softail, and ’01-’16 Touring and Trike models. (except ’01 EFI Touring).

Transmission Side Covers

37116-06 $149.95

Fits ’06-’17 Dyna, and ’07-’17 Softail (except FLSS, FLSTFBS, FXCW, FXCWC, FXSB and FXSE), and ’07-’16 Touring and Trike models. Does not fit models equipped with a hydraulic clutch.

Rocker and Tappet Covers Fits ’99-’17 Dyna, ’00-’17 Softail and ’99-’16

ENGINE TRIM 349

Fits ’99-’17 Twin Cam-equipped models. Does not fit with Lifter Block Covers P/N 18248-99, 18278-06 and 18262-00 or Billet Lifter Cover P/N 18088-02.

D. GASKET KIT FOR BLACK INNER PRIMARY It’s the details that count. This gasket kit eliminates the silver shadow line you see between the engine and primary. It’s the perfect finishing touch any time the primary has been removed for engine service or during the installation of other accessories. Comprehensive kit contains all gaskets and hardware required to reinstall the primary.

25700337 $68.95 Fits ’06-’17 Dyna®, ’07-’17 Softail®, and ’07-’16 Touring and Trike models. Also available: EVOLUTION® 1340 ENGINE COVERS – CHROME Inspection Covers – without Shifter Hole 60572-86 $79.95 Fits ’93-’05 FXDWG and ’86-’06 FLST, FXST and FXSTS models.

350 ENGINE TRIM

Engine Covers – Twin Cam

A. HARLEY-DAVIDSON® GENUINE HIGH PERFORMANCE 1.4KW STARTER

This starter offers both great styling and increased performance, providing 15% greater torque than the stock replacement starter. Engineered and tested by Harley-Davidson from the ground up, this starter offers unparalleled reliability and durability. No special battery or battery cable requirements.

Fits ’06-’17 Dyna® (except ABS equipped models) and ’07-’17 Softail® and ’07-’16 Touring and Trike models.

31619-06A Black Finish.

31621-06A Chrome Finish.

$457.95

$598.95

B. FRONT ENGINE MOUNT COMPONENTS – CHROME

A must-have for any chrome connoisseur, this chrome-plated Front Engine Mount Bracket will set your custom apart from the rest. The chrome bracket is machined from premium 6061-T6 aluminum, and is a direct bolt-on replacement for the Original Equipment bracket. Can be used with the stock stabilizer link, or dressed up with the optional chrome Front Engine Mount Stabilizer Link P/N 16213-10. Kit includes chrome mounting hardware.

Add a custom style to the front end with this brilliant chromeplated Engine Mount Stabilizer Link. This custom heim joint assembly complements the chrome Billet Front Engine Mount Bracket P/N 16205-10. Kit includes chrome mounting hardware.

16213-10 Front Tie Link. $59.95 Fits ’09-later Touring and Trike models.

C. FRONT ENGINE MOUNT COMPONENTS – BLACK Perfect for installation on a blacked-out engine, these black engine mount components replace the factory silver-finished parts and blend these functional items into the background. Manufactured from Original Equipment components for perfect fit and proven reliability.

16400056 Front Engine Mount Bracket. $48.95 Fits ’08-’16 Touring models.

16400055 Front Tie Link. $54.95 Fits ’09-later Touring models.

ENGINE TRIM 351