NPR 2026 Autumn (APR-JUN)

NEW PRODUCT RELEASE

NEW PRODUCT RELEASE

DEPTH OF CUT AT 0 ° 47mm

40VMAX XGT BRUSHLESS 125MM CIRCULAR SAW

 Performance & Cutting Capability: High‑efficiency Makita brushless motor with Automatic Torque Drive Technology (ADT) delivers fast, controlled power to cut 45mm framing timber in a single pass, automatically adjusting performance under load for consistent results in a compact cordless design.

 Flush Cutting & Bevel Capability: Tool‑less removable sub‑base enables flush cutting, supported by a ‑15° negative bevel designed specifically for close‑to‑wall applications, extending through to 45° for standard bevel cuts.

 Precision & Control: Fine cutting‑depth adjustment, precise base squareness adjustment, and a rigid aluminium base plate help deliver accurate, clean cuts with greater control on site.

 Safety: AFT (Anti‑Kickback Feedback sensing Technology) detects sudden drops in blade speed and stops the blade to help reduce kickback.

 Visibility & Dust Control: LED job light with pre‑ and after‑glow improves cut‑line visibility, while blower function and AWS compatibility support cleaner operation.

 Durability: Aluminium die‑cast base and XPT protection provide resistance to dust and moisture for demanding jobsite conditions.

STANDARD ACCESSORIES:

 E-28880 EFFICUT 125mm x 20mm x 24T Wood Blade

 194202-9 Dust Nozzle set

 783217-7 Hex Wrench 5mm

CUTTING RANGE Left -15° - Right 45°

CAPACITIES

FEATURES

| 40Vmax XGT BRUSHLESS 125mm CIRCULAR SAW

-15° FLUSH CUTTING CAPABILITY

RETRACTABLE GUARD LEVER

BEVEL CAPABILITY

OPTIONAL ACCESSORIES

E-28880 B-69462

125mm x 20mm x 24T Wood Blade

125mm x 20mm x 45T Wood Blade

REDUCED CARBIDE TIP SWING WIDTH

Improves wood chip removal, producing higher cutting efficiency & increased runtime.

SHARP TOP BEVEL ANGLE

Provides aggressive cutting through material, improving cutting speed and efficiency. MODEL

SLIMLINE LOWER BLADE TIP

Ground lower blade tips to reduce friction and cutting resistance.

NEW PRODUCT RELEASE

40VMAX XGT BRUSHLESS 66MM BAND SAW

PB003GZ

 Performance: Features a powerful Makita‑built brushless motor delivering blade speeds up to 3.2 m/s for fast, efficient cutting performance.

 1917F0-6 Portable Bandsaw Table Set MAX PIPE DIAMETER 1917F0-6

BAND BLADE (LXWXT) 835 mm | 13 mm | 0.5 mm CUTTING CAPACITY

- 3.2m/s

 Constant Speed Control: Electronic constant speed control minimizes blade speed reduction under load, ensuring smooth and stable cutting through demanding materials.

 Blade Control: Increased blade tension capability minimizes blade slippage, while easy blade tracking adjustment allows precise alignment by simply turning an adjustment screw.

 Electronic Brake: Electric brake rapidly stops the blade after trigger release, enhancing productivity and operator safety.

 Ergonomics: Easy‑to‑grip handle with elastomer surface provides a secure, non‑slip grip for improved comfort and control during use.

 Visibility: Four LED job lights with pre‑glow and after‑glow functions illuminate the cutting area for improved visibility in low‑light conditions.

 Durability: An integrated catch bracket contacts the workpiece at the end of the cut instead of the tool body, helping protect the housing from scratches and damage.

OPTIONAL ACCESSORIES:

 B-40543 5 Pk Bi-Metal Bandsaw Blade 835 x 13 x 0.5mm 14T

 B-40559 5 Pk Bi-Metal Bandsaw Blade 835 x 13 x 0.5mm 18T

 B-40565 5 Pk Bi-Metal Bandsaw Blade 835 x 13 x 0.5mm 24T

 191897-9 Parafen Cutting Wax for extended blade life

OPTIONAL: TABLE ATTACHMENT

NEW PRODUCT RELEASE

40VMAX XGT 1" D-HANDLE IMPACT WRENCH

TW009GZ

 High Torque Output: Delivers up to 3,150 Nm of fastening torque and 4,000Nm of breakaway torque, providing an excellent balance of high torque and maneuverability for demanding industrial applications.

 Auto‑Stop Function: Forward and reverse rotation auto‑stop modes help prevent over‑tightening and fastener loss

 Impact Power Selection: Electronic 4‑stage impact power selection provides added versatility across a wide range of fastening applications.

 Ring LED: Provides excellent illumination for application in darker areas, providing clear visibility with pre‑glow and after‑glow functions.

 Convenience: Tool‑less adjustable side handle installs 360° and allows forward and backward angle adjustment to suit a wide range of working positions. An integrated tool hanger ring allows the tool to be conveniently hung on pipes, hooks, or scaffolding when not in use.

 1" Anvil: 1" Square Anvil with friction ring

MAX. STANDARD BOLT M27 - M45

MAX. HIGH TENSILE BOLT M20 - M33

ANVIL 1" Square Drive | Friction Ring

MAX. BREAKAWAY TORQUE 4,000Nm MAX FASTENING TORQUE 3,150Nm

OPTIONAL ACCESSORIES

DEEP DRIVE SOCKETS:

 E-24686 DEEP IMPACT SOCKET 1" 27 x 90mm

 E-24692 DEEP IMPACT SOCKET 1" 30 x 90mm

 E-24701 DEEP IMPACT SOCKET 1" 32 x 90mm

 E-24717 DEEP IMPACT SOCKET 1" 33 x 90mm

 E-24723 DEEP IMPACT SOCKET 1" 34 x 90mm

 E-24739 DEEP IMPACT SOCKET 1" 36 x 90mm

 E-24745 DEEP IMPACT SOCKET 1" 38 x 90mm

 E-24751 DEEP IMPACT SOCKET 1" 40 x 90mm

 E-24767 DEEP IMPACT SOCKET 1" 44 x 90mm

 E-24773 DEEP IMPACT SOCKET 1" 46 x 100mm

 E-24789 DEEP IMPACT SOCKET 1" 50 x 100mm

 E-24795 DEEP IMPACT SOCKET 1" 55 x 108mm

 E-24804 DEEP IMPACT SOCKET 1" 60 x 108mm

 E-24810 DEEP IMPACT SOCKET 1" 65 x 120mm

STANDARD SOCKETS:

 E-24511 IMPACT SOCKET 1" 27 x 60mm

 E-24527 IMPACT SOCKET 1" 30 x 62mm

 E-24533 IMPACT SOCKET 1" 32 x 63mm

 E-24549 IMPACT SOCKET 1" 33 x 63mm

 E-24555 IMPACT SOCKET 1" 34 x 63mm

 E-24561 IMPACT SOCKET 1" 36 x 66mm

 E-24577 IMPACT SOCKET 1" 38 x 66mm

 E-24583 IMPACT SOCKET 1" 40 x 66mm

 E-24599 IMPACT SOCKET 1" 41 x 68mm

 E-24608 IMPACT SOCKET 1" 42 x 68mm

 E-24614 IMPACT SOCKET 1" 44 x 70mm

 E-24620 IMPACT SOCKET 1" 46 x 72mm

 E-24636 IMPACT SOCKET 1" 50 x 76mm

 E-24642 IMPACT SOCKET 1" 55 x 84mm

 E-24658 IMPACT SOCKET 1" 60 x 88mm

 E-24664 IMPACT SOCKET 1" 65 x 92mm

 E-24670 IMPACT SOCKET 1" 70 x 96mm

NEW PRODUCT RELEASE

 Constant Speed Control: Maintains consistent vibration and stable operation regardless of battery level, supporting uniform concrete finishing.

 Blade System: Interchangeable aluminium blades feature tool‑less removal and are fully washable for easy cleaning.

 Ergonomics: Rubberised grips and wide grip spacing enhance comfort and control, with a lock‑on button supporting continuous operation over longer passes.

 Lightweight Design: Aluminium pipe and blade construction reduces overall weight, improving balance and ease of handling during extended use.

 Durability: XPT provides dust and moisture resistance, with protected switch and battery interfaces to prevent concrete adhesion.

 Monitoring: Integrated battery‑out indicator alerts the operator when battery level is low, helping avoid unexpected interruptions.

OPTIONAL ACCESSORIES:

 1917D5-2 900mm Screed Blade

 1917D4-4 1400mm Screed Blade

 1917D3-6 1800mm Screed Blade

 1910J1-0 Battery Cover

COMING SOON

40VMAX XGT BL IMPACT

WRENCH AND GREASE GUN KIT

DK0277G201

KIT INCLUDES:

 GP001GZ01: 40Vmax XGT® Brushless

Grease Gun with 450g Barrell

 TW007GZ: 40Vmax XGT® Brushless

1/2"

Mid‑Torque Impact Wrench

 BL4040F (x2): 40Vmax XGT® Tabless

High Output 4.0Ah Batteries

 DC40RA: 40Vmax XGT® Rapid Charger

 191W32‑7: Tool Bag with Wheels

40VMAX XGT BL 3 PIECE KIT

DK0260G301

TO REPLACE DK0156G302

KIT INCLUDES:

 HP003GZ: 40Vmax XGT® BL HT

Hammer Drill Driver

 TD004GZ: 40Vmax XGT® Brushless

High Torque Impact Driver

 TM001GZ: 40Vmax XGT® Brushless

Multi Tool StarlockMax

 BL4025: 40Vmax XGT® 2.5Ah Battery

 BL4040F: 40Vmax XGT® Tabless High

Output 4.0Ah Battery

 DC40RB: 40Vmax XGT® Dual Port Rapid

Charger

 191W32‑7: Tool Bag with Wheels

40VMAX XGT 6 PIECE KIT

DK0276G601

TO REPLACE DK0204G601

KIT INCLUDES:



HP003GZ: 40Vmax XGT® BL HT

Hammer Drill Driver

 TD004GZ: 40Vmax XGT® Brushless

High Torque Impact Driver

 HS012GZ: 40Vmax XGT® Brushless

165mm Circular Saw

 UB002GZ: 40Vmax® XGT Blower

 JR001GZ: 40Vmax XGT® Brushless

Reciprocating Saw

 GA013GZ: 40Vmax XGT® Brushless

125mm Paddle Switch Angle Grinder

 BL4040F (x2): 40Vmax XGT® Tabless

High Output 4.0Ah Batteries

 DC40RA: 40Vmax XGT® Rapid Charger

 191W32‑7: Tool Bag with Wheels

40VMAX XGT BL GREASE GUN 450G BARREL KIT

GP001GD101

KIT INCLUDES:

 GP001GZ01: 40Vmax XGT® Brushless

Grease Gun with 450g Barrell

 BL4025:40Vmax XGT® 2.5Ah battery

 DC40RC: 40Vmax XGT® Charger

 832411‑9: 20" Tote Tool Bag ‑ Black

NEW PRODUCT RELEASE

40VMAX XGT BRUSHLESS BACKPACK BLOWER POWER EQUIVALENT

UB004GZ UB004GE201

 Powerful Blowing Speeds: Powerful airflow and high airspeed enable effective debris removal, with a narrow nozzle design that boosts air velocity for demanding clearing tasks.

 Variable Speed Control By Trigger: Stepless trigger control delivers precise variable airspeed, while a button‑operated cruise function locks the selected output to reduce fatigue.

 Intuative Mode Switch Button: Selectable dual airflow modes allow users to match output to workload, improving efficiency across light and heavy‑duty applications.

 Improved Nozzle System: Steplessly adjustable‑length nozzle and replaceable tip nozzles support a wide range of applications, including standard end nozzle and flat nozzle supplied as standard.

 User Interface: Highly visible control panel with high‑brightness LEDs clearly displays operating status, while tactile buttons improve usability in professional environments.

STANDARD ACCESSORIES:

UB004GZ

 End Nozzle Ø71mm

 Flat nozzle

 Pipe Support Belt

UB004GE201

 End Nozzle Ø71mm

 Flat nozzle

 Pipe Support Belt

 Flat nozzle

 2 X BL4080H 40Vmax XGT® Tabless High Output 8.0Ah Batteries  DC40RB 40Vmax Dual Rapid Charger OPTIONAL ACCESSORIES:

 1918E9-7 End Nozzle Ø81mm Set  1917R0-0 Battery Pouch Holder 2.0Ah - 8.0Ah  1917R2-6 Cushion Belt

NEW PRODUCT RELEASE

VACUUM BAG CAPACITY 25L MAX BLOWER AIR VOLUME

3.1m3/min | High: 3.5m3/min MAX. BLOWING AIR FORCE Low: 4.0N | High: 5.0N

AIR SPEED Low: 280km/h | High: 313 km/h MAX. VACUUM AIR VOLUME Low: 6.2m3/min | High: 6.8m3/min MAX. SUCTION POWER Low: 110W | High: 150W

MAX. SEALED SUCTION Low: 3.5 kPa | High: 4.2 kPa

40VMAX XGT BRUSHLESS BLOWER VACUUM UB005GU101

UB005GZ

 High‑Performance Blowing and Vacuuming: High‑output blower and vacuum performance delivers efficient removal of leaves, debris, and light gravel. Provides class‑leading suction power and airflow, outperforming comparable DC cordless blower vacuums.

 Operating Modes: Two selectable power modes allow output to be matched to the task. Mode 1 prioritises control and extended runtime, while Mode 2 delivers maximum suction or airflow when higher performance is required.

 Variable Speed Control by Trigger: Variable speed trigger provides precise control over airflow and suction. An integrated cruise control lever helps reduce finger fatigue during prolonged use.

 Efficient Debris Collection: 25‑litre dust bag with wide opening supports efficient debris collection and easy disposal. Built‑in shredder blade mulches debris during vacuuming to maximise bag capacity.

 Ergonomic Design: Supplied padded shoulder harness improves comfort during extended operation. Dual‑wheel caster enhances maneuverability and stability when operating in vacuum mode.

 Removable Housing Cover: Allows fast access to the fan area for clearing obstructions such as string or trapped debris. Built in interlock prevents the tool from operating when the cover is open.

STANDARD ACCESSORIES:

UB005GZ

 Shoulder Harness

 1918B8-8 280mm Wide Nozzle UB005GU101

 Shoulder Harness

 BL4040F 40Vmax XGT® Tabless High Output 4.0Ah Battery

 DC40RC 40Vmax XGT® Single Port Charger

 1918B8-8 280mm Wide Nozzle

CLEARING WIDTH

 High‑Performance Snow Clearing: 40Vmax XGT BL Cordless Snow Blower delivers efficient removal of light snow with a 530 mm clearing width and 300 mm clearing height. Compact single‑stage auger design is ideal for pathways and residential driveways.

 Optimised Discharge Control: 180° stepless discharge angle adjustment allows precise snow direction control via a handle‑mounted switch. Manual deflector provides up to 10 m throwing distance.

 Variable Speed Operation: Stepless blower speed adjustment optimises snow discharge and helps conserve energy in lighter snow conditions.

 Enhanced Visibility and Feedback: Handle and front‑mounted LED lights illuminate the work area in low‑light conditions. Red LED battery indicator blinks when low and remains solid when empty.

 Ergonomic and Safe Design: Soft‑grip handle improves comfort, while the electric brake quickly stops the auger for added user protection. Balanced weight distribution allows easy front lifting for transport.

 Weather‑Resistant Construction: Water‑resistant design compatible with IPX4 / XPT ensures reliable operation in wet and snowy environments.

 Compact Storage and Maintenance: Folding handle enables compact storage. Built‑in snow and ice remover is stored on the lower handle for quick clearing.

STANDARD ACCESSORIES:

 Packable Cover

 Snow and Ice Remover

NEW PRODUCT RELEASE

40VMAX XGT BRUSHLESS GROUND TRIMMER

UG001GZ UG001GM101

Superior Cutting Performance: T‑shaped arrangement of wide hedge trimmer‑style blades delivers high cutting efficiency and a wide cutting path. The reciprocating blade action allows grass to be cut smoothly by moving forward, improving productivity compared to conventional trimming methods.

Adjustability & Portability: Tool‑less handle height adjustment allows quick setup to suit different user heights. Foldable handle design improves portability and reduces storage space when not in use.

Cutting Height Capability: Adjustable wheel positioning allows cutting heights of up to 105 mm, enabling high‑cut operation to suit different grass conditions and maintenance requirements.

Durability: Designed for demanding ground‑level work, featuring reinforced components including a metal under plate to improve durability when operating close to the ground. IPX4‑rated waterproof construction supports reliable operation in wet grass and damp outdoor conditions.

STANDARD ACCESSORIES:

UG001GZ

 424434-7 End Cap 24mm

 4mm Hex Wrench

 13mm Box Wrench UG001GM101

 424434-7 End Cap 24mm

 4mm Hex Wrench

 13mm Box Wrench

 BL4040 40Vmax XGT® 4.0Ah Battery

 DC40RC 40Vmax XGT® Single Port Charger

DRIVE SYSTEM Pneumatic Spring

30° Round Head MC Metal Connector

Nails

MOD Sequential Only

 Advanced Brushless Motor: Ensures efficient firing while maintaining consistent power.

 Pneumatic Spring System: The pneumatic spring drive system provides a smooth driving force, while minimising recoil for enhanced user comfort during operation

 Exposed Tip Design: Improves accuracy when positioning the bit into metal connector guide holes.

 Adjustable Depth Gauge: Enables precise control of fastening depth to help prevent over‑driving or under‑driving.

 Anti‑Dry Fire Mechanism: The anti‑dry fire mechanism is activated before the number of remaining nails reaches zero, avoiding missed shots.

 Excellent Battery Performance: When used with a 6Ah battery DBN640 can fire up to 1,000 nails on a single charge.

STANDARD ACCESSORIES:

 141X57-7 Rafter Hook Assembly

 347C14-9 Belt Hook

 783202-0 4mm Hex Wrench

 821943-1 Hard Plastic Carry Hase 18V LXT BRUSHLESS

NEW PRODUCT RELEASE

PERFECT FOR ELECTRICIANS

7.2V IMPACT DRIVER 2X 1.5AH

TD023DSE

 Performance: Delivers up to 25Nm of maximum fastening torque in a compact form factor. High speed output of 0–2,450RPM and 0–3,000IPM reduces fastening time for improved productivity.

 Multi‑function Variable Speed: Rotary switch allows the operator to adjust driving speed and direction simultaneously for precise fastening control. Switch position is easily accessible for both left‑ and right‑handed users.

 Easy‑to‑grip tapered Bit Sleeve: Is designed for quick and effortless bit removal. Standard 6.35mm (1/4") hex chuck allows fast bit changes.

 Visibility: Integrated LED job light with pre‑glow function illuminates both the fastening point and surrounding area by expanding the illuminated field for improved visibility.

 Ergonomics: Soft‑grip handle provides increased comfort and secure handling during operation. Well‑balanced design supports both straight and pistol‑grip positions for versatile use.

STANDARD ACCESSORIES:

 784244-7 PH-2 Double-ended Bit 50mm

 BL0715 (x2) 7.2V 1.5Ah Battery

 DC10WA 7.2V - 10.8V Single Port Charger

 821954-6 Plastic Carry Case

 Grinding Performance: High‑output 850 W motor delivers consistent grinding performance across a wide speed range. Constant speed control helps minimise rotation speed drop under load, improving work efficiency and durability.

 Variable Speed Control: Variable speed control dial allows stepless adjustment from 2,800 to 11,000rpm to suit a wide range of finishing and surface preparation applications, with stable performance at medium to low speeds.

 Soft Start: Provides smooth, controlled start‑up. Anti‑restart function helps prevent accidental start‑up after power interruption.

 Constant Speed Control: Stabilises rotation under load, helping reduce motor stress and heat generation during extended operation.

STANDARD ACCESSORIES:

 153489-2 Auxiliary Handle

 782423-1 Lock Nut Wrench

 199710-5 Cutting Wheel Cover Attachment 125mm

 D-18465 Grinding Wheel 125 x 22.23 x 6mm A24R

NEW PRODUCT RELEASE

E-29832 EFFICUT WOOD WITH NAILS 185MM BLADE

FEATURES | EFFICUT WOOD WITH NAILS BLADE

TOOTH CONFIGURATION OVER VS. COMPETITOR BLADE

LONGER LIFE POWER THROUGH NAIL-EMBEDDED WOOD

NEW OBTUSE CUTTING-EDGE DESIGN ENHANCES DURABILITY WHEN CUTTING NAIL-EMBEDDED TIMBER.

FEATURES STAGGERED

 High Performance EFFICUT Tooth Design: Delivers fast, efficient cutting with reduced resistance, thanks to a refined cutting edge, sharp top bevel angle, and slimmed tip bottom.

 Staggered Tooth Pattern: The staggered tooth configuration reduces cutting vibration and improves efficiency, delivering more stable cuts and higher productivity when cutting wood with embedded nails.

Nail Embedded Teeth design Enhances impact resistance and protects blade teeth from breakage when cutting through nails.

Advanced Bevel Tip Design delivers fast, aggressive cutting with a smooth finish. Optimised for reduced resistance and consistent performance across tough applications.

The triple tooth design is engineered to minimise vibration for efficient cutting, improving durability and reducing the risk of chipping when cutting through nail-embedded timber.

POWER THROUGH NAIL-EMBEDDED WOOD

NEW PRODUCT RELEASE

7/16" SHANK WOOD SELF FEED BITS

1917P9-8 DRILL STAND

 Precise Vertical Drilling: Enables precise vertical drilling, securely holding cordless drill and driver drill models to deliver accurate, straight holes, even in thick materials.

 76mm Diameter Capacity: High capacity design supports drilling up to Ø76mm, making it suitable for large‑diameter woodworking and counterboring applications.

 400mm Length Capacity: Supports 400mm long drill bits without base interference, allowing deep drilling without extending beyond the stand base.

 Maximum Stability: Fetaures a three‑point stability system with pedal base and lockable elevation slide, reducing movement during drilling and allowing safe bit installation, removal, and transport.

COMPATIBLE WITH HP003G, DF003G, HP001G, DF001G, DHP492, DDF492, DHP486, DDF486, DHP481, DDF481, DHP458, DDF458

NEW PRODUCT RELEASE

150MM IMPACT XPS

E-29991 XPS CARABINER 5PC W/ 1X NUTSETTER

B-29094 FLEXIBLE BIT HOLDER 1/4" HEX 300MM

D-81452 MULTI-MATERIAL TCT BLADE 216 X 80T

D-82959 BIM HOLESAW 14PC SET FOR PLUMBING

 Longer Life: Last up to 100 x longer compared to standard fastener bits.

 Precision Machined: Precision machined tips for superior full contact fit, improved holding power, and longer life.

 Pulse Torsion Rings: Disperse impact energy through the torsion zone and off the bit tip.

 High Strength: For use with high torque impact drivers and driver‑drills.

 Carabiner Clip: Features a convenient carabiner clip for easy attachment to belts, bags, or toolboxes.

 Durabilty: Lasts up to 100X longer than standard impact bits.

 Efficiency: Precision machined tips with a superior full contact fit for improved holding power and longer life.

 Design: Unique Torque Absorbing Shoulder and Base Power Rings designed to help improve bit life performance.

 Flexibility: Can reach up to 90° of flex for driving into hard‑to‑ access places.

 Durability: Constructed from durable materials for longer life.

 Premium Cutting

Performance: Exceptional cutting quality from tungsten carbide tips on cutting teeth, delivering clean, burr free finishes.

 Versatility & Material

 Easy Material Removal: Features a wide slot for removing material inside the hole saw. TO REPLACE D-63971 TO REPLACE D-63878

Compatibility: Ideal for PVC plastics, laminated wood, MDF, Chipboard, and aluminium; achieves superior cut quality on a range of materials.

 Includes sizes: 16, 19, 22, 25, 32, 35, 37, 44, 51, 57, 64, 68, & 76mm.

EMAIL: MAKITASALES@MAKITA.CO.NZ

0‑800‑MAKITA | 0800 625 482 WORKING HOURS: MON TO FRI 8AM 5PM