INSTRUCCIONES DE ARMADO / ASSEMBLY INSTRUCTIONS
LOT N°
ZAPATERO APILABLE BÁSICO SILPA / SILPA BASIC STACKABLE SHOE RACK
Tel: (602) 695 9581 / 695 91 81 | EXT 118 La Nueva Estancia, Yumbo - Valle del Cauca - Colombia www.rta.com.co
Herrajes Básicos / Basic Hardware
¡ATENCIÓN! / ATTENTION! En las próximas páginas está el contenido de las piezas y herrajes del mueble. Asegúrate de que la cantidad de herrajes y piezas que hay en la caja sea la correcta y todo esté en buen estado. Ya que cuando el mueble esté armado no podrás realizar ninguna reposición.
Aplica estas instrucciones cada vez que vayas a utilizar uno de estos herrajes durante el armado. / Apply these instructions everytime you’re using one of these connectors during the assembly.
On the next pages is the content of the pieces and hardware of the furniture. Make sure the number of hardware and parts in the box is correct and everything is in good condition. When the furniture is assembled you will not be able to make any replacement
Tarugos / Wood Dowels 1. Inserta el tarugo en la perforación indicada
y golpéalo suavemente hasta que llegue hasta el final de la perforación. / Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
Recomendaciones Importantes / Key Recommendations • • •
Ensamble el mueble entre dos personas. / Assemble the cabinet between two people. Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja. / Assemble the cabinet on a flat smooth surface, preferably on a careted floor or the box carton. Se recomendia utilizar un destornillador eléctrico para facilita el ensamble / It is recommended to use an electric screwdriver to facilitate assembly.
2. Verifica que NO se inserte el tarugo en la perforación de la caja minifix. / Verify that the dowel is NOT inserted into the perforation of the minifix cam.
Para más información escanea AQUÍ Scan for more info
Minifix y Pernos / Minifix Cam & Spreading Bolt pequeña flecha small arrow
Herramientas Necesarias / Required Tools
1
2. Se debe insertar el perno con la parte plástica hacia abajo. / The spreading bolt should be put with the black plastic part facing down edge.
2 3 Destornillador de estrella Phillips Head Screwdriver
Destornillador de pala Flat Head Screwdriver
Martillo Hammer
1. La caja minifix tiene una pequeña flecha en su parte superior, se debe insertar las cajas minifix con la flecha apuntando hacia la perforación que hay en el borde de la pieza. / The Minifix cam has a little arrow on its upper surface you should insert these cams with the little arrow pointing towards the drilling on the panel’s edge.
3. Luego de unir las piezas, se deben girar 180° las cajas minifix con un destornillador de estrella para ajustar y asegurar el ensamble. / After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Herrajes / Hardware
Cargas Máximas / Max Suggested Loads
Tarugo / Wood dowel
Perno Minifix / Spreading Bolt
Caja Minifix / Minifix Cam
Tapa Minifix / Cover Caps
x10
x2
x2
x14
2"
5 11
Herraje unión esquinas / Corners backet
Deslizador Puntilla / Nail-on Glide
Tornillo ensamble / Drywall screw
Tornillo Lámina / Flat Head Screw
x4
x4
x8
x8
5 11
*Peso en Kg / Weight in Kg. *Peso en Libras / Weight in Lb
Piezas de Armado / Assembly Parts A - x2 B - x1 C - x1
B
A
A C
1
3
Ax2
A B
2
A C
Tornillo ensamble 2" Drywall screw 2"
B A
El lado sin enchape de las piezas debe de ir hacia abajo. The non-veneered side of the pieces should face down
A Tornillo ensamble 2" Drywall screw 2"
4
5
Ubicar los soportes esquineros en las esquinas y atornille con tornillo lamina 9/16" Place the corner supports in the corners and screw with flat head screw 9/16"
1
Soporte Esquinero Corner Support
T Tornillos lamina 9/16" Flat head screws 9/16". Tornillo lamina 9/16" Flat head screw 9/16"
A B
A
1
C 1
A C A
1
B 1
Para apilar otro zapatero
6 To stack another shoe rack
8 A
A A
A
B
B
C
C A
7
A B
B
Tapas minifix/ Cover caps
A
C
A
Para más información escanea AQUÍ/Scan for more info
C
Después de ajustar todas las cajas minifix y los tornillos, cúbralas con las tapas adhesivas. After you finish the adjustment of the cams and screws, cover them with the cover caps.
A
Al terminar de armar, desprenda las letras adhesivas. After you finish assembling the cabinet, take off the adhesive letters.