Skip to main content

RVQ_10303 28julio2026

Page 1


¡ATENCIÓN! / ATTENTION!

En las próximas páginas está el contenido de las piezas y herrajes del mueble. Asegúrate de que la cantidad de herrajes y piezas que hay en la caja sea la correcta y todo esté en buen estado.Ya que cuando el mueble esté armado no podrás realizar ninguna reposición.

On the next pages is the content of the pieces and hardware of the furniture. Make sure the number of hardware and parts in the box is correct and everything is in good condition. When the furniture is assembled you will not be able to make any replacement

Recomendaciones Importantes /

Key Recommendations

• Ensamble el mueble entre dos personas. /Assemble the cabinet between two people.

• Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja. /Assemble the cabinet on a flat smooth surface, preferably on a careted floor or the box carton.

• Se recomendia utilizar un destornillador eléctrico para facilita el ensamble / It is recommended to use an electric screwdriver to facilitate assembly.

Herramientas Necesarias /

Required Tools

Destornillador de estrella

Phillips Head

Screwdriver

Destornillador de pala

Flat Head

Screwdriver Martillo Hammer

Herrajes Básicos / Basic Hardware

Aplica estas instrucciones cada vez que vayas a utilizar uno de estos herrajes durante el armado. /Apply these instructions everytime you’re using one of these connectors during the assembly.

Tarugos /

Wood Dowels

1. Inserta el tarugo en la perforación indicada y golpéalo suavemente hasta que llegue hasta el final de la perforación. / Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.

2. Verifica que NO se inserte el tarugo en la perforación de la caja minifix. / Verify that the dowel is NOTinserted into the perforation of the minifix cam.

Minifix y Pernos /

pequeña flecha small arrow

Minifix Cam & Spreading Bolt

1

2

3

1. La caja minifix tiene una pequeña flecha en su parte superior, se debe insertar las cajas minifix con la flecha apuntando hacia la perforación que hay en el borde de la pieza. /The Minifix cam has a little arrow on its upper surface you should insert these cams with the little arrow pointing towards the drilling on the panel’s edge

2. Se debe insertar el perno con la parte plástica hacia abajo. /The spreading bolt should be put with the black plastic part facing down.edge.

3. Luego de unir las piezas, se deben girar 180° las cajas minifix con un destornillador de estrella para ajustar y asegurar el ensamble. / After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.

Tarugo / Wood dowel

Perno Minifix / Spreading Bolt

*Peso en Kg / Weight in Kg. *Peso en Libras / Weight in Lb

Voltear Rotate
Tornillo lámina Flat head screw

Slide the back panels inside the grooves. Desliza los fondos dentro de las ranuras.

Ubicar los soportes esquineros en las esquinas y atornille con tornillo lamina 9/16"

Place the corner supports in the corners and screw with flat head screw 9/16"

Soporte Esquinero 1

Corner Support

Tornillos lamina 9/16"

Flat head screws 9/16".

Tornillo lamina 9/16"

Flat head screw 9/16"

Soporte Fondo 2 Inserte los soportes de fondo entre la ranura y el fondo.

Back Panel Support

Insert the back panel supports between the grove and the back panel.

Atornille los soportes de fondo con tornillos lamina 3/4"

Fix the back panel supports whit 3/4" flat head screws.

Instalación de la puerta

Door Installation

Seguir las instrucciones de ajuste de la siguiente pagina.

Follow the adjustment instructions on the next page.

Ajuste de las bisagras Hinge adjustment

Ajuste de profundidad

Depth adjustment

Ajuste lateral Side adjustment

Ajuste de altura

Height adjustment

Ajuste de tornillos Screws adjustment

Usar los ajustes según la necesidad especifica.

Use the settings acourding to the specific need.

Después de ajustar todas las cajas minifix y los tornillos, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams and screws, cover them with the cover caps.

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

Turn static files into dynamic content formats.

Create a flipbook
RVQ_10303 28julio2026 by Madecentro Colombia - Issuu