Skip to main content

RMB_9633 29julio2026

Page 1


¡ATENCIÓN! / ATTENTION!

En las próximas páginas está el contenido de las piezas y herrajes del mueble. Asegúrate de que la cantidad de herrajes y piezas que hay en la caja sea la correcta y todo esté en buen estado.Ya que cuando el mueble esté armado no podrás realizar ninguna reposición.

On the next pages is the content of the pieces and hardware of the furniture. Make sure the number of hardware and parts in the box is correct and everything is in good condition. When the furniture is assembled you will not be able to make any replacement

Recomendaciones Importantes /

Key Recommendations

• Ensamble el mueble entre dos personas. /Assemble the cabinet between two people.

• Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja. /Assemble the cabinet on a flat smooth surface, preferably on a careted floor or the box carton

• Se recomendia utilizar un destornillador eléctrico para facilita el ensamble / It is recommended to use an electric screwdriver to facilitate assembly

Herramientas Necesarias /

Required Tools

Destornillador de estrella

Phillips Head

Screwdriver

Destornillador de pala

Flat Head

Screwdriver Martillo Hammer

Basic Hardware Herrajes Básicos /

Aplica estas instrucciones cada vez que vayas a utilizar uno de estos herrajes durante el armado. /Apply these instructions everytime you’re using one of these connectors during the assembly.

Tarugos /

Wood Dowels

1. Inserta el tarugo en la perforación indicada y golpéalo suavemente hasta que llegue hasta el final de la perforación. / Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.

2. Verifica que NO se inserte el tarugo en la perforación de la caja minifix. / Verify that the dowel is NOTinserted into the perforation of the minifix cam.

Minifix y Pernos /

pequeña flecha small arrow

Minifix Cam & Spreading Bolt

1. La caja minifix tiene una pequeña flecha en su parte superior, se debe insertar las cajas minifix con la flecha apuntando hacia la perforación que hay en el borde de la pieza. /The Minifix cam has a little arrow on its upper surface you should insert these cams with the little arrow pointing towards the drilling on the panel’s edge

2. Se debe insertar el perno con la parte plástica hacia abajo. /The spreading bolt should be put with the black plastic part facing down.edge.

3. Luego de unir las piezas, se deben girar 180° las cajas minifix con un destornillador de estrella para ajustar y asegurar el ensamble. / After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint. 1 2 3

Tarugo / Wood dowel

Perno Minifix / Spreading Bolt x20 Caja Minifix / Minifix Cam x20

x20

Puntillas / Nail x4

x4

lámina / Flat head screw 8x5/8

Grapa para fondo / Rear panel clamp x30

Bisagra interior + tornillos / Hinge + screw x2

Pata de madera / Wooden leg x16

Manija Huna / Handle

Tapa Minifix / Cover Caps x2

lamina / Flat head screw 9/16" x2

Kit antivuelco + tornillos / Tip - Over prevention Device

*Peso en Kg / Weight in Kg.

*Peso en Libras / Weight in Lb

Tornillo
Tornillo
Voltear
Rotate
Voltear
Rotate

¡Con mucho cuidado! very carefully!

Tornillo lámina Flat Head Screw
Voltea el mueble Turn over the cabinet

A F G E

Instalación de la puerta

Door Installation

Seguir las instrucciones de ajuste de la siguiente pagina.

Follow the adjustment instructions on the next page.

Ajuste de bisagras / Hynge adjustment

Ajuste de profundidad Depth adjustment

Ajuste lateral Side adjustment

Ajuste de altura Height adjustment

1

2

3

4

5

Fix your cabinet to the wall

Haz una perforación en el borde superior de la parte superior del mueble y fija un extremo de la correa con el tornillo de 15mm y una arandela. / Make a small hole on the top edge of the furniture top and fix one side of the strip with the 15mm screw and the washer

Extiende la correa y mide en la pared para perforar.

Stretch the strip and measure on the wall to drill.

Perfora la pared a 30mm de profundidad con una broca de 6mm.

Drill a hole in your wall to a depth of 30mm using a 6mm drill bit.

Inserta el chazo plástico en la perforación.

Insert the plastic wall anchor into the hole.

Fija el otro extremo de la correa con la arandela y el tornillo que sobran.

Fix the other side of the strip with the screw and the washer.

Ajuste de tornillos Screws adjustment

Usar los ajustes según la necesidad especifica. B H I A G D

Use the settings acourding to the specific need.

Después de ajustar todas las cajas minifix y los tornillos, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams and screws, cover them with the cover caps.

Al terminar de armar, desprenda las letras adhesivas. A

After you finish assembling the cabinet, take off the adhesive letters.

Turn static files into dynamic content formats.

Create a flipbook
RMB_9633 29julio2026 by Madecentro Colombia - Issuu