Skip to main content

RLC_4521 29julio2026

Page 1


Alto/ Height: 61,6 cm

Ancho/ Width: 147,3 cm

Fondo/ Depth: 40,7 cm

Girar 180° / Rotate 180°

“Lea muy bien el instructivo antes de armar el producto , ármelo en un lugar limpio y preferiblemente en una superficie plana.”

“Read the instructions well before assembling the product, assemble it in a clean and preferably on a flat surface”

MUEBLES MODULARES, CONSTRUYENDO HOGARES /READY TO ASSEMBLE FURNITURE, BUILDING HOMES M M D B G E H H C I K

RECOMENDACIONES IMPORTANTES

KEYRECOMMENDATIONS

NO pinte el mueble/ Do not paint the furniture.

NO mojar o ubicar a la intemperie/ Don’t expose to rain or direct sun

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina/ Do not overload the cabinet. Weight not exceeding 66LB for kitchen cabinets. O O O O O O

NO lavar las manijas o tiraderas con jabones o elementos abrasivos/ Don’t wash handles or dumps with soap or abrasives.

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Don’t hit or hammer the furniture (just do it where indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos/ Do not allow children to handle the cabinets or drawers.

Limpie con paño seco y lustrador de muebles, de esta forma alarga la vida del mueble/Clean with a dry cloth. Polishing wax for furniture can be use. P P

SIEMPRE levante el mueble entre dos personas, NO lo arrastre/ Do not drag the furniture. Lift it between two people.

B C D E F G I K L M M

Siga las siguientes instrucciones:

1.Abrir la caja del mueble y buscar la bolsa con los herrajes.

2.Abrir el paquete de herrajes y comprobar que el contenido de las piezas es correcto.

3. Separe los herrajes para facilitar su identificación durante el armado.

4.Arme el mueble en un lugar limpio y en una superficie plana.

Acontinuación verá una breve explicación de cada herraje y su función principal. Below you can see a explanation of each hardware and its main function.

CONECTORES- PERNOS/CONNECTORSPREADING BOLTS

Es un herraje de unión, la cabeza esférica del perno se ubica en el centro de la caja embutida en forma de copa desde cualquier ángulo y luego se sujeta firmemente. Este permite un arme y desarme repetidamente y una unión firme que no se afloja. It is a hardware union, spherical head of the pin is located in the center of the box embossed in the form of glass from any angle and then subject firmly. This allows for arming and disarming repeatedly and a strong union that is not loosened.

TARUGO DE MADERA/WOODEN PIN

Es un pedazo de madera corto y grueso, aprox. de 3cm a 10cm, que sirve para amarrar el mueble y darle resistencia. It is a piece of wood short and thick, aprox. 5cm to 10cm, which serves to tie the cabinet and give it strength.

RECOMENDACIONES DE ARMADO ASSEMBLYRECOMENDATIONS

El buen funcionamiento del mueble depende de su correcto armado. Armed with a suitable furniture depends on its smooth functioning.

HERRAJES PARAARMADO

ASSEMBLY HARDWARE

x16 x16 x44

Tapa Minifix/ Cover Caps

Perno minifix/ Dowels

Minifix/ Minifix Cams x16 x6 x4 x8 x4

Tornillo lámina 6 X 9/16"/ Sheet Metal Screw

Tarugo/ Fluted dowel pin

Soporte entrepaño movil Negro / Mobile shlef support

Cantonera N°2/ Wide Brace

Deslizador/ Plastic Glide

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNAPIEZAO ESTE DEFECTUOSADEVUELVALAS PIEZASALALMACÉN CON SU FACTURAPARAEFECTUAR ELCAMBIO DE LAS PIEZASY/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY. CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR DEFECTIVE PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE DEFECTIVE PIECES OR WARDWARE AS SOON AS POSSIBLE.

Girar 180° / Rotate 180°

PIEZAS DEARMADO ASSEMBLY PARTS

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE FURNITURE, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT A B C D E F G H I J K L Mx2 F G G F D N

*(Herramientas NO incluidas)*Tools NOT Included

Girar 180° / Rotate 180°

SE RECOMIENDAARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA, PARA NO RAYARLO / IT IS RECOMMENDED TO ASSEMBLE THE PRODUCT ON THE BOX OR ON A PLANE SURFACE FOR NOT SCRATCH IT B C H I

Turn static files into dynamic content formats.

Create a flipbook