RACK
¡ATENCIÓN! / ATTENTION!
En las próximas páginas está el contenido de las piezas y herrajes del mueble. Asegúrate de que la cantidad de herrajes y piezas que hay en la caja sea la correcta y todo esté en buen estado.Ya que cuando el mueble esté armado no podrás realizar ninguna reposición.
On the next pages is the content of the pieces and hardware of the furniture. Make sure the number of hardware and parts in the box is correct and everything is in good condition. When the furniture is assembled you will not be able to make any replacement
Recomendaciones Importantes /
Key Recommendations
• Ensamble el mueble entre dos personas. /Assemble the cabinet between two people.
• Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja. /Assemble the cabinet on a flat smooth surface, preferably on a careted floor or the box carton.
• Se recomendia utilizar un destornillador eléctrico para facilita el ensamble / It is recommended to use an electric screwdriver to facilitate assembly.
Herramientas Necesarias /
Required Tools
Destornillador de estrella
Phillips Head
Screwdriver
Destornillador de pala
Flat Head
Screwdriver Martillo Hammer
Herrajes Básicos / Basic Hardware
Aplica estas instrucciones cada vez que vayas a utilizar uno de estos herrajes durante el armado. /Apply these instructions everytime you’re using one of these connectors during the assembly.
Tarugos /
Wood Dowels
1. Inserta el tarugo en la perforación indicada y golpéalo suavemente hasta que llegue hasta el final de la perforación. / Put in the dowel inside the indicated hole and softly hit it until it’s fully inside.
2. Verifica que NO se inserte el tarugo en la perforación de la caja minifix. / Verify that the dowel is NOTinserted into the perforation of the minifix cam.
Minifix y Pernos /
pequeña flecha small arrow
Minifix Cam & Spreading Bolt
1
2
3
1. La caja minifix tiene una pequeña flecha en su parte superior, se debe insertar las cajas minifix con la flecha apuntando hacia la perforación que hay en el borde de la pieza. /The Minifix cam has a little arrow on its upper surface you should insert these cams with the little arrow pointing towards the drilling on the panel’s edge
2. Se debe insertar el perno con la parte plástica hacia abajo. /The spreading bolt should be put with the black plastic part facing down.edge.
3. Luego de unir las piezas, se deben girar 180° las cajas minifix con un destornillador de estrella para ajustar y asegurar el ensamble. / After joining two panels together you should turn the cams 180° with a phillips head screwdriver to adjust and secure the joint.
Tarugo / Wood dowel x24 Perno Minifix / Spreading Bolt x24 Caja Minifix / Minifix Cam
Tapa Minifix / Cover Caps Color 1 x10
Tapa Minifix / Cover Caps Color 2 x28 Tornillo Lámina / Flat Head Screw
Bisagra parche + tornillos / Full overlay hinge + screws x2
interior + tornillos / Inset
Herraje unión esquinas / Corners backet x4 Tornillo ensamble / Drywall screw x8 Puntilla / nail x34
Grapa para fondo / Rear Panel Clamp x6
*Peso en Kg / Weight in Kg.
*Peso en Libras / Weight in Lb
A- x1
B - x1
C - x1
D - x1
E - x1
F - x1
G - x1
H - x1
I - x1
J - x1
K - x1
L - x1
M - x2
N - x2
O- x1
P- x1
Q- x1
R- x1
S- x1
Ubicar los soportes esquineros en las esquinas y atornille con tornillo lamina 9/16"
Place the corner supports in the corners and screw with flat head screw 9/16"
Soporte Esquinero
Corner Support
Instalación de la puerta
Door Installation
Seguir las instrucciones de ajuste de la siguiente pagina.
Follow the adjustment instructions on the next page.
Ajuste de las bisagras
Hinge adjustment
Ajuste de profundidad
Depth adjustment
Ajuste lateral Side adjustment
Ajuste de altura
Height adjustment
Ajuste de tornillos Screws adjustment
Usar los ajustes según la necesidad especifica.
Use the settings acourding to the specific need.
Después de ajustar todas las cajas minifix y los tornillos, cúbralas con las tapas adhesivas.
After you finish the adjustment of the cams and screws, cover them with the cover caps.
Al terminar de armar, desprenda las letras adhesivas.
After you finish assembling the cabinet, take off the adhesive letters.