Skip to main content

MMP_3960 31julio2026

Page 1


Bisagra parche/ Full overlay hinge

Tope burbuja

AJUSTE LATERAL / LATERAL ADJUSTMENT puerta lateral puerta lateral puerta lateral

AJUSTE DE ALTURA / HEIGHT ADJUSTMENT AJUSTE DE PROFUNDIDAD / DEPTH ADJUSTMENT

Al terminar de armar desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / When you finish assembly, off adhesive (in case of residues of glue, wipe it with alcohol)

Al finalizar el ajuste de los conectores, proceda a poner las tapas adhesivas / When you finish the adjustment of the connectors, proceed to put the cover tapes

INSTRUCCIONES DE ENSAMBLE /ASSEMBLY INSTRUCTIONS

MUEBLE ALUVIA 60 X 45 / ALUVIA 60 X 45 VANITY

Alto: 85 cm

Ancho: 59,5 cm

Fondo: 44.5 cm

LOTE No:

BAÑOS Y COCINAS

“Lea muy bien el instructivo antes de armar el producto, ármelo en un lugar limpio y preferiblemente en una superficie plana”

Deslice los cajones dentro del mueble/ Slide the drawers inside the cabinet

SE RECOMIENDA aplicar silicona en el empalme entre el lavamanos y el mueble para evitar filtraciones de agua / To avoid water leaks it is recommended to apply silicone between the cabinet and the sink.

Deslice el entrepaño dentro del mueble/ Slide the shelf inside the cabinet

Utilizar una broca de 5/16" para hacer las perforaciones en el muro/ Use a 5/16" drill bit to drill the wall.

Tornillo 2" + Chazo Mariposa/ Wall Anchor

IMPORTANTE

* Herramientas NO incluidas/ Tools not included

Medir y marcar las distancias, como muestra la figura, recuerde que las perforaciones deben estar alineadas / Take measures and distances, as shown in the figure, remember that the holes must be aligned.

*Medidas en milímetros / Measured in milimeters

No olvide poner las tapas adhesivas en donde quedan visibles/ Don´t forget to stick the cover caps where visible

RECOMENDACIONES DE ENSAMBLE

De un adecuado armado del mueble depende su buen funcionamiento. Following the cabinet assemble instructions will assure its proper functioning.

GARANTÍA: Este mueble para baño CORONA® tienen una garantía de 1 año en partes de madera y en herrajes, a partir de la fecha de compra.

La garantía cubre defectos de fabricación y mala calidad de materiales que impidan el armado y uso del mueble. Dado el caso se reemplazará la(s) pieza(s) defectuosa(s). El tablero melamínico no se despega siempre y cuando cumpla estrictamente las recomendaciones sobre el cuidado del producto. Estos están inmunizados.

Examine completamente las piezas antes de ensamblar, una vez armado el mueble, la empresa NO se hará responsable por piezas dañadas. La garantía NO aplica para productos que hayan sido armados incorrectamente, manipulados o utilizados de manera no razonable, modificados, reparados, o que hayan sido sobrecargados o expuestos a chorro de agua directa o hayan omitido alguna de las recomendaciones establecidas. No incluye mano de obra para el ensamble del mueble. Esta garantía aplica únicamente bajo condiciones normales de uso y manipulación.

Para hacer válida la garantía, comuniquese con nuestra linea de atención al cliente de CORONA.

HERRAJES PARA ARMADO ASSEMBLY HARDWARE

Perno minifix/ Spreading bolt Tarugo/ Fluted dowel pin x26 x27 x24

x4

Tapa adhesiva color 2/ Cover Caps x4

Tope burbuja/ Bum Pum stop

Bisagra Parche Slide On/ Full Overlay hinge x4 x26

Minifix/ Minifix connector

Girar 180° / Rotate 180° x4

Tapa adhesiva color 1/ Cover Caps

Soporte entrepaño/ Shelf support x2

Tornillo lámina/ Sheet Metal screw x36 x2

Riel Extensión Total 35 cm/ Full Extention Drawer Slides x2

Pata acero/ Steel leg x1

Platina en L/ Angle Brackets

Chazo Mariposa/ Taquete+ Tornillo ensamble 2" 1/2 / Plastic wall anchor x1

Pieza plástica en U grande/ Plastic U accesory large size

IMPORTANTE

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA LE AGRADECEMOS LLAMAR DE INMEDIATO A LA LÍNEA DE ATENCIÓN EN COLOMBIA: 01 8000 51 20 30 : -BOGOTÁ:

PIEZAS DE ARMADO ASSEMBLY PARTS

*(Herramientas NO incluidas)/ (Tools not included)

- Taladro/ Drill

- Broca de muro de 5/16"/ 5/16" Drill bit.

- Destornillador de estrella/ Star Screwdriver

- Destornillador de pala/ Flat Screwdriver

N O A B C D E F G H I J K L N O P Q

PARA PONER RIEL EN LATERAL DEL CAJÓN/

Revisar que el tope metálico del riel quede en la PARTE DELANTERA/

The metallic stop should be placed on the front.

PARA PONER RIEL EN LATERAL DEL CAJÓN/

When placing the slide on the side of the drawer: VOLTEAR TURN OVER VOLTEAR TURN OVER

When placing the slide on the side of the drawer:

Revisar que el tope metálico del riel quede en la PARTE DELANTERA/

The metallic stop should be placed on the front.

Leer las recomendaciones de ensamble antes de comenzar con el armado del mueble / Read the assembly instructions before starting the assemble of the cabinet.

Se recomienda armar el mueble sobre la caja o sobre una superficie lisa para no rayarlo; y con la ayuda de otra persona / It´s recommended to assemble the cabinet above the box or on a flat surface to not scratch it and with the help from another person

15 C C K K J J

VOLTEAR TURN OVER

2

Revisar que el tope plástico del riel quede en la PARTETRASERA/ The plastic stop should be placed on the rear.

PARAPONER RIELEN LATERALDELMUEBLE/ TO PUTTHE DRAWER SLIDE ONTHE SIDE OFTHE FURNITURE: L C A B D F G Q

Girar 180° / Rotate 180°

Riel Extensión Total / Full extention Drawer Slides E

Platina en L/ Angle Brackets
Bisagra parche/ Full overlay hinge
Bisagra parche/ Full overlay hinge
Girar 180° /
Rotate 180°
Girar 180° / Rotate 180°

Turn static files into dynamic content formats.

Create a flipbook