Skip to main content

CLW_961

Page 1

9

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

G J E

3 mm

D

F

K B A I

C Alto/ Height: 119 cm / 46.8 in Ancho/ Width: 69,1 cm / 27.2 in Fondo/ Depth: 45,1 cm / 17,7 in

LOTE No:

Al finalizar el ajuste, cubra las cajas con las tapas adhesivas/ After tightening all the panels, cover the minifix cams with the adhesive caps.

Al terminar de armar, desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / After finishing the assembly, take off the adhesives. (In case of glue residues, wipe them with alcohol)

By:

RTA DESIGN S.A.S. TEL (572) 691 17 00 PBX (572) 695 91 81 CALI - COLOMBIA

www.rta.com.co

CENTRO DE COMPUTO 70 M / COMPUTER CENTER 70 M


RECOMENDACIONES IMPORTANTES KEY RECOMMENDATIONS

O

NO pinte el mueble / Do not paint the furniture.

F NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets.

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

O O

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture. Lift it between two people.

P

7

G

Limpie con paño seco , / Clean with a dry cloth.

O

E D

O O

A C

Girar 180° / Rotate 180°

No olvide apretar todos los conectores / Do not forget to tighten every connector

B

P

G F

HERRAJES BÁSICOS PARA MUEBLES RTA BASIC HARDWARE FOR RTA FURNITURE

Herrajes/ hardware.

P

1. Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

2. Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

4. Arme el mueble en un lugar limpio y en una superficie plana / Assemble the furniture in a clean place and on a flat surface.

MUEBLES MODULARES, CONSTRUYENDO HOGARES /READY TO ASSEMBLE FURNITURE, BUILDING HOMES

8 E

El riel en la bandeja deslizante debe quedar con la rueda hacia atrás/ Drawer slide in the “H” part, must be installed with the wheel in the back edge of the part

H

D H A C

B

fig.1

I


5

RECOMENDACIONES DE ENSAMBLE / ASSEMBLY RECOMENDATIONS El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly.

MINIFIX / CONNECTOR - DOWELS 180°

3 1 B

G

2 A Sistema de unión compuesto por un perno (A) y una caja minifix (B). (1) Se inserta la caja minifix dentro de la perforación ubicada en la cara de la pieza, la flecha debe apuntar siempre a

6

la dirección de la perforación por donde entrará el perno. (2) Se debe insertar el perno por su parte plástica en las perforaciones que se indiquen, luego se inserta la punta metálica en la perforación para que su cabeza quede al interior de la caja minifix. (3) Girar la caja minifix 180° para apretar las dos piezas. It´s a fitting system made of a spreading bolt (A) and a minifix cam (B). (1) Insert the minifix cam in the hole placed in the face of the panel with the arrow ponting towards the hole where the bolt will

G

fit. (2) Insert the bolt with its plastic base in the shown holes, then insert the metallic bolt head in the holes so it fits inside the

VOLTEAR /TURN OVER

Girar 180° / Rotate 180°

minifix cam. (3)Tight the panels by turning the minifix cam 180°.

TARUGOS O TAQUETES / FLUTED DOWEL PIN

F G

E F

1

caja minifix / dowels hole

x

2

Es un pedazo de madera corto y grueso, de aproximadamente 5 a 10 cm de largo, que sirve para amarrar el mueble y darle resistencia. It ´s a short and thick piece of wood, 1,9 to 3,9 inches aproximately, which is used to tie the cabinet and give it resistence.


3

RECOMENDACIONES IMPORTANTES KEY RECOMMENDATIONS VOLTEAR /TURN OVER

Se recomienda armar el mueble entre 2 personas o más. it is recommended to assemble the product between 2 or more people.

D

A

B

C

Se recomienda armar el mueble sobre la caja o una superficie lisa para no rayarlo. it is recommended to assemble the product on the box or on a flat surface to not scratch it.

VOLTEAR TURN OVER

Voltear el mueble cuidadosamente para ensamblar los fondos. Carefully turn over the cabinet to assemble the background panels.

MUEBLES MODULARES, CONSTRUYENDO HOGARES /READY TO ASSEMBLE FURNITURE, BUILDING HOMES

D

4

F E


RIELES/ DRAWER SLIDES

1 A

HERRAJES PARA ARMADO ASSEMBLY HARDWARE x10

x10

x10

x10

TAPA MINIFIX/ COVER CAPS

TARUGO/ WOODEN PIN

MINIFIX/ CAMS

PERNO MINIFIX/ DOWELS

x1

x20

x4

x12

RIEL 35mm/ DRAWERS SLIDES

PUNTILLA/ NAIL

DESLIZADOR/ SLIDER

TORNILLO LAMINA/ SCREW

B

C

2

x4

I Girar 180° / Rotate 180°

DESLIZADOR/ SLIDER

VOLTEAR /TURN OVER

I

DETRÁS/BACK

A

B C TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTÉ DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY. CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFFECTIVE THE REPLACEMENT OF THE IMPERFECT PIECES OR HARDWARE AS SOON AS POSSIBLE.


PIEZAS DE ARMADO ASSEMBLY PARTS

*(Herramientas NO incluidas) *Tools NOT Included

G

C

J

F A

B

E

D

I

D G E

F

H

H

J

K A

K

C

B

I

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE FURNITURE, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT.


Turn static files into dynamic content formats.

Create a flipbook
CLW_961 by Madecentro Colombia - Issuu