Skip to main content

CDB_4988

Page 1


RECOMENDACIONES IMPORTANTES KEY RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets. O O O O O

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

Limpie con paño seco , / Clean with a dry cloth.

HERRAJES BÁSICOS PARA MUEBLES RTA

BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

P2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface.

NO OLVIDE: Los tubos cromados se deben colocar entre las piezas D y F TUBO

T2 U2 C W V U1 F M G L D T1 A

Introduzca los cajones en la estructura

Bisagra parche

Puertas: T1 Y U2

Bisagra Semi-parche

Puertas: U1, T2, V y W

INSTALACIÓN BISAGRAS

aplica para todas las bisagras

IMPORTANTE

Tenga en cuenta: Voltear el mueble cuidadosamente.

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly. RECOMENDACIONES DE ENSAMBLE / ASSEMBLYRECOMENDATIONS

MINIFIX / CONNECTOR - DOWELS

180°

1 2 3 A B

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

(3)Tightthepanelsbyturningtheminifixcam180°.

TARUGOS O TAQUETES / FLUTED DOWELPIN

caja minifix / dowels hole

Esunpedazodemaderacortoygrueso,deaproximadamente3a10cmdelargo,quesirveparaamarrarelmuebley darleresistencia.

It´s ashortandthickpieceofwood,1,18to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence.

HERRAJES PARAARMADO ASSEMBLE HARDWARE

Minifix/ Minifix Cams

Perno minifix/ Spreading Bolt Tarugo/ Wooden Pin Tornillo lámina 6 X 9/16"/ Sheet Metal Screw

Manija Zamak 96mm/ Handle

IMPORTANTE: Después de ajustar todos los minifix, proceda a poner los rieles en las piezas F, H Y E.

Bisagra Semiparche 35mm/ Half Overlay Hinge

Bisagra Parche 35mm/ Full Overlay Hinge

Tubo Ovalado/ Closet Rod

Soporte Tubo Ovalado/ Closet Rod Support

Tornillo Manija/ Handle Screw

Puntillas/ Panel Pin

Tapa Adhesiva

Minifix/ Caps Cover

Tornillo de Ensamble 2¨/ Drywall Screw

Riel Sencillo 35cm/ Drawer Slides

Deslizador 40mm/ Plastic Glide

IMPORTANTE

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT IF ANY PART IS MISSING OR DEFECTIVE PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE DEFECTIVEPIECESORWARDWAREASSOONASPOSSIBLE.

IMPORTANTE

NOTA: Repetir este paso para los otros cajones.

NOTA: Deslice el fondo, pieza Z, a lo largo de las ranuras de la estructura del cajón.

ASSEMBLE PARTS

Girar 180° / Rotate 180° PIEZAS DEARMADO

SE RECOMIENDAARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA, PARA NO RAYARLO / IT IS RECOMMENDED TO ASSEMBLE THE PRODUCT ON THE BOX OR ON A PLANE SURFACE FOR NOT SCRATCH IT

*Tools NOT Included

Girar 180° / Rotate 180°

Perforación para los rieles. Ensamblar los rieles en el paso 13, después de ajustar los minifix.

soporte bisagra Parche
Bisagra SEMIparche
Bisagra Parche

soporte bisagra Semi-parche

soporte bisagra Semi-parche

Perforación para los rieles. Ensamblar los rieles en el paso 13, después de ajustar los minifix.

Turn static files into dynamic content formats.

Create a flipbook
CDB_4988 by Madecentro Colombia - Issuu