Skip to main content

CCB_7773

Page 1


Chazo Plástico + Tornillo de Ensamble/ Plastic Wall Anchor + Drywall Screw

Alto/ 180 cm / Height: 70.86 in Ancho/ 120 cm / Width: 47.24 in Fondo/ 47.35 cm / Depth: 18.64 in

RECOMENDACIONES IMPORTANTES KEY

RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets.

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

Limpie con paño seco , / Clean with a dry cloth.

HERRAJES BÁSICOS PARA MUEBLES RTA

BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

P2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface.

Al finalizar el ajuste, cubra las cajas con las tapas adhesivas/ After tightening all the panels, cover the minifix camswiththeadhesivecaps.

Al terminar de armar, desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / After finishing the assembly, take off the adhesives (In case of glue residues,wipethemwithalcohol)

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly.

MINIFIX / CONNECTOR - DOWELS

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

(3)Tightthepanelsbyturningtheminifixcam180°.

TARUGOS O TAQUETES / FLUTED DOWELPIN

1 caja minifix / dowels hole

x 2

Esunpedazodemaderacortoygrueso,deaproximadamente5a10cmdelargo,quesirveparaamarrarelmuebley darleresistencia.

It´s ashortandthickpieceofwood,1,9to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence.

Tarugo/ Fluted Dowel Pin

HERRAJES PARAARMADO ASSEMBLY HARDWARE

Perno minifix/ Spreading Bolt

Minifix/ Minifix Cams

Tornillo de Ensamble 2"/ Drywall Screw

Bisagra Semi Parche 35mm/ Half Overlay Hinge

Bisagra Parche 35mm/ Full Overlay Hinge

Deslizador 40mm/ Plastic Glide

Tornillo Manija/ Handle Screw

Manija Arco/ Handle

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO EN CASO QUE FALTE ALGUNA PIEZA O ESTÉ DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

Tornillo Ensamble/ Drywall screw

HERRAJES PARAARMADO ASSEMBLY

HARDWARE

Soporte Tubo Ovalado/ Rod Support x2

Perfil en H / H profile x2

Riel / Drawer Slides x2

Tubo Ovalado/ Rod

Cantonera/ Angle Brace

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO EN CASO QUE FALTE ALGUNA PIEZA O ESTÉ DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

Puntilla 1"/ Nail
x26
Tapa Adhesiva Minifix / Cover Caps
Tornillo Lamina/ Sheet Metal Screw x96
Chazo Plástico + Tornillo de Ensamble/ Plastic Wall Anchor + Drywall Screw

PIEZAS DEARMADO

ASSEMBLY PARTS

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE CABINET, CAREFULLY READ THE INSTRUCTIONS. IT´S RECOMMENDED TO ASSEMBLE THE CABINET ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT.

Bisagra Semi Parche/ Half Overlay Hinge

INSTALACIÓN BISAGRAS/ HINGES INSTALLATION

AJUSTE DE ALTURA / HEIGHT ADJUSTMENT

AJUSTE DE PROFUNDIDAD / DEPTH ADJUSTMENT

AJUSTE LATERAL / LATERAL ADJUSTMENT

Bisagra Parche/ Full Overlay Hinge

Bisagra Semi Parche/ Half Overlay Hinge

INSTALACIÓN BISAGRAS/ HINGES INSTALLATION

puerta lateral puerta lateral puerta lateral

Bisagra Parche/ Full Overlay Hinge

AJUSTE DE ALTURA / HEIGHT ADJUSTMENT AJUSTE DE PROFUNDIDAD / DEPTH ADJUSTMENT

AJUSTE LATERAL / LATERAL ADJUSTMENT

VOLTEAR TURN OVER

Bisagra parche/ Full overlay hinge

G G H M

B C D E

180° / Rotate 180°

Bisagra parche/ Full overlay hinge

Bisagra semi-parche/ Half overlay hinge

D D VOLTEAR TURN OVER

Girar
Girar 180° / Rotate 180°

Turn static files into dynamic content formats.

Create a flipbook
CCB_7773 by Madecentro Colombia - Issuu