Skip to main content

BWM_4459

Page 1


Ajuste de las bisagras Hinge adjustment Side adjustment

Ajuste de profundidad 5

Depht adjustment

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams, cover them with the cover caps.

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Alto: 180 cm

Ancho: 53 cm

Fondo: 40,3 cm

LOT N°

Height: 70,86 in

Width: 20,86 in

Depth: 15,86 in

Tel - (572) 691 17 00 PBX - (572) 695 91 81

Yumbo - Valle del Cauca - Colombia www.rta.com.co

Kaia Bar Cabinet

RECOMENDACIONES

IMPORTANTES

No pintar el mueble.

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people

Avoid direct contact with water, fire or exposureto heat sources.

ADVERTENCIA

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

Fixing the cabinet to the wall Instalación del mueble a la pared 5/16 Drill bit.

/ Inches Pared / Wall

Gire para apretar.

Rotate to tighten.

NECESARIAS*

REQUIRED TOOLS*

*No incluidas y no se muestran en tamaño real.

*Not included, and not shown actual size

HERRAJES PARA ARMADO

ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente x60

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Tarugo Wood Dowel x36 Minifix Minifix Cams Perno Minifix Spreading Bolt x36

Tapa Adhesiva Minifix Cover Caps x30 (Color 1) (Color 2) x2

Tapa Adhesiva Minifix Cover Caps x10

Bisagra Interior (Tornillos incluidos) Inset Hinge (Screw Included) x1

Manija (Tornillos incluidos) Handle (Screw Included)

HERRAJES PARA ARMADO ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Pata Leg

Tornillo Lámina Flat Head Screw x22 x4

Soporte Entrepaño Shelf support x5

Nail Puntilla

Mariposa + Tornillo Ensamble Drywall Screw + Wall Anchor x2 x48

Colgador de Copas Wine Glass Rack x2

Chazo

PIEZAS DE ARMADO ASSEMBLY PARTS

Gire para apretar.

Rotate to tighten.

Considere las perforaciones en la pieza “A” para la instalar las patas y elija el orificio correcto de la pata para colocarlas en su lugar. Consider the perforations in part “A” to install the legs and choose the correct leg hole to put them into place.

CARGAS MÁXIMAS SUGERIDAS

MAX SUGGESTED LOADS

RECOMENDACIONES DE ENSAMBLE ASSEMBLY RECOMMENDATIONS

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble.

Assemble the cabinet between two people.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the box carton.

Carefully read all the steps and identify all the wood parts and hardware before assembling the cabinet.

Rotate to tighten.

Gire para apretar. 2 1

Turn static files into dynamic content formats.

Create a flipbook