Skip to main content

BMP_3362

Page 1


INSTALACIÓN BISAGRAS/ HINGES INSTALLATION

AJUSTE DE ALTURA/ HEIGHT ADJUSTMENT puerta lateral

AJUSTE DE PROFUNDIDAD/ DEPTH ADJUSTMENT puerta lateral

AJUSTE LATERAL/ LATERAL ADJUSTMENT

Al finalizar el ajuste, cubra las cajas con las tapas adhesivas/ After tightening all the panels, cover the minifix camswiththeadhesivecaps.

Al terminar de armar, desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / After finishing the assembly, take off the adhesives. (In case of glue residues,wipethemwithalcohol) puerta lateral

Alto/ 171,2 cm / Height: 67,4 in

Ancho/ 72,3 cm / Width: 28.46 in

Fondo/ 38,6 cm / Depth: 15,19 in

(572) 691 17 00

RECOMENDACIONES IMPORTANTES

KEY RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets. O O O O O

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

Limpie con paño seco , / Clean with a dry cloth.

HERRAJES BÁSICOS PARA MUEBLES RTA

BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface.

VOLTEAR EL MUEBLE CUIDADOSAMENTE / CAREFULLY FLIP THE CABINET

* Centímetros - Pulgadas / Centimeters - Inches

Piso terminado / Finished floor

* Herramientas NO incluidas/ Tools not included

Utilizar una broca de 5/16" para hacer las perforaciones en el muro/ Use a 5/16" drill bit to drill the wall.

Tornillo 2" + Chazo Mariposa/ Drywall Screw+ Wall Anchor

EL MUEBLE CUIDADOSAMENTE / CAREFULLY FLIP THE CABINET

RECOMENDACIONES DE ENSAMBLE / ASSEMBLYRECOMENDATIONS

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly.

MINIFIX / CONNECTOR - DOWELS

180°

1 2 3 A B

(3)Tightthepanelsbyturningtheminifixcam180°. B D S R R R Q Q

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

TARUGOS O TAQUETES / FLUTED DOWELPIN

caja minifix / dowels hole

Esunpedazodemaderacortoygrueso,deaproximadamente5a10cmdelargo,quesirveparaamarrarelmuebley darleresistencia.

It´s ashortandthickpieceofwood,1,9to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence.

RECOMENDACIONES

IMPORTANTES / KEY RECOMMENDATIONS

Se recomienda armar el mueble sobre la caja o una superficie lisa para no rayarlo. It is recommended to assemble the product on the box or on a flat surface to not scratch it.

PESO MAX. SUGERIDO EN MUEBLE (Kg) / MAX SUGGESTED LOAD (Kg)

VOLTEAR TURN OVER

Voltear el mueble cuidadosamente para ensamblar los fondos. Carefully turn over the cabinet to assemble the back panels.

NOTA: La resistencia a las cargas puede variar dependiendo si es una carga distribuida o una carga puntual, las grácas corresponden a cargas puntuales, NO exceder los pesos sugeridos /

NOTE: The load capacity depends if it is a point load or if it is an uniform distributed load, do not exceed the suggested loads.

Bisagra Interior/ Half overlay hinge

Girar 180° / Rotate 180°

VOLTEAR TURN OVER

Bisagra Interior/ Half overlay hinge Girar 180° / Rotate 180°

HERRAJES PARAARMADO ASSEMBLY

HARDWARE

Tarugo/ Fluted Dowel Pin

Perno minifix/ Spreading Bolt

Pata/ Leg x4 x6

Tornillo Lámina/ Sheet Screw

Minifix/ Minifix Cams

Puntillas/ Nail x16

Minifix/ Cover Caps

Bisagra Interior 35mm/ Inset Hinge x3

Tornillo 2" + Chazo Mariposa/ Drywall Screw+ Wall Anchor x2

Sistema Push to open/ Push to open system

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

x35
Tapa Adhesiva

PIEZAS DEARMADO ASSEMBLY PARTS

J K Mx2 Ox2 P Rx3 Girar 180° / Rotate 180°

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE CABINET, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT

D E F G H I Q P O N M L K J S M N O Q R R R F J VOLTEAR TURN OVER J

NO incluidas) *Tools NOT Included A B

VOLTEAR TURN OVER

VOLTEAR TURN OVER

VOLTEAR TURN OVER

Girar 180° / Rotate 180°

Girar 180° / Rotate 180°

Soporte Sistema PUSH/ PUSH system support
Soporte Sistema PUSH/ PUSH system support
FRENTE/ FRONT

Turn static files into dynamic content formats.

Create a flipbook
BMP_3362 by Madecentro Colombia - Issuu