Skip to main content

BLZ_6547

Page 1


INSTRUCTIONS

CORNER BAR CABINET ASSEMBLY

THIS FURNITURE MUST BE FIXED TO THE WALL

! WARNING

Childrenhavediedfromfurnituretipover.Toreducetherisk oftipover:

ALWAYSsecurethisfurnituretothewallusingawallanchor. NEVERallowchildrentostand,climb,orhangondrawers,doors orshelves.

Donotdefeatorremovethedrawerinterlocksystem. Placeheaviestitemsinthelowestdrawers.

NEVERputaTVonthisfurniture.

To ensure the safety of those using this cabinet, it is crucial to properly secure it to the wall using a wall anchor . This product includes the necessary items for fixing the furniture to the wall. However, it is important to note that incorrect installation or failure to use the tip-over device can result in serious injury or even death.

For this reason, we highly recommend that a professional installer handle the installation of the cabinet to the wall.

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people.

Avoid direct contact with water, fire or exposure to heat sources.

WARNING !

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

RECOMENDACIONES IMPORTANTES

No pintar el mueble

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

ADVERTENCIA !

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

*Not included, and not shown actual size

*No incluidas y no se muestran en tamaño real.

ASSEMBLY HARDWARE HERRAJES PARA ARMADO

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Minifix Cams Minifix

Spreading Bolt Perno Minifix x48 x106

Wood Dowel Tarugo

Flat Head Screw Tornillo Lámina x3

Cover Caps Tapa Adhesiva Minifix x50 x8

x4

Inset Hinge (Screw Included) Bisagra Interior (Tornillos incluidos)

Wine Glass Rack Colgador de Copas x1

Door Stop Tope Burbuja x2 x2

x2

Handle Manija

Nail-on Glide Deslizador Puntilla

Wall anchor (Screws Included) Chazo (Tornillos incluidos) 2"1/2

Shelf support Soporte Entrepaño x2

Hardware items are NOT shown actual size. Los herrajes no se muestran en el tamaño real.

ASSEMBLY PARTS PIEZAS DE ARMADO

A - x1

B - x1

C - x1

D - x1

E - x1

F - x1

G - x1

H - x1

I - x1

K - x1

L - x1

M - x1

N - x1

J - x1

O - x1

P - x3

Q - x3

R - x1

S - x1

T - x1 E D F R C N P H B Q T J L A M K I Q O S G Q P P

MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS

ASSEMBLY RECOMMENDATIONS

Two people are recommended to assemble the product.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the carton box of the product.

RECOMENDACIONES DE ENSAMBLE

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Carefully read the assembly instructions and identify every wood and hardware part before start assemblying the cabinet.

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble

Turn Over Voltear

Turn minifix cams to the right to tighten.

Gire las cajas minifix hacia la derecha para apretar las piezas. x2

Turn Over Voltear

Turn minifix cams to the right to tighten.

Gire las cajas minifix hacia la derecha para apretar las piezas.

x6

K J x4

Door Installation

Instalación de

Puertas 1 x16 x3 T x2

Hinge adjustment

Ajuste de las bisagras

Depht adjustment

Ajuste de profundidad

Side adjustment

Ajuste lateral

After you finish the adjustment of the cams, cover them with the cover caps.

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

Height adjustment Ajuste de altura

AAfter you finish assembling the cabinet, take off the adhesive letters.

Al terminar de armar, desprenda las letras adhesivas.

Fixing the cabinet to the wall Instalación del mueble a la pared

1 2 3 4 5

Youmustdrillthebottomsguidedbytheholesinthe structureswihta3/16"drillbit./Debesperforarlosfondosguiandote delasperforacionesdelasestructurasconunabroca3/16".

Onthewall,measureandmarkthepointsshownbelow/Enla pared,mideymarcalospuntosqueteindicamosabajo.

Drillonthemarkingswitha5/16"drillbit/Debesperforarenlos puntoscontaladroyunabrocade5/16".

Insertthewallanchorsinsidethedrillings/Insertaloschazos plásticosenlasperforaciones.

Placethecabinetandsecureitwiththescrews/Ubicaelmueble yasegúraloconlostornillos.

*Inches / Centimetros

Broca de 5/16". 1

*Wall / Pared 5/16 Drill bit.

After you finish the adjustment of the cams, cover them with the cover caps.

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

2 3 F/G

*Wall / Pared

* Floor / Piso

AAfter you finish assembling the cabinet, take off the adhesive letters.

Al terminar de armar, desprenda las letras adhesivas.

WARRANTY POLICY

Furniture has a 1 year warranty coverage in wooden parts and hardware pieces since its manufacturing date, which you can see in the lot number printed on the product box and the assembly instructions leaflet.

Warranty covers materials and workmanship imperfections which impair the assembly or correct functioning of the cabinet.

This warranty is not valid if the defects or imperfections are caused by the incorrect following of the assembly instructions, warnings and recommendations, misuse, intentional damage, fire or flood, or after modifications or any kind of alteration, or repaired by someone not authorized, when it´s been assembled 3 months after the date of purchase These defects MUST be reported before the warranty coverage period ends. Once the product has been assembled, the company will not be responsible for defective and/or damaged parts.

This warranty is ONLY valid for the ORIGINAL PURCHASER, it doesn’t apply if the product has been resold, rented, etc.

Furniture will take no liability for incidental or consequential damages caused to or by the product (This may not apply in your state).

To make this warranty valid you must write to our customer service email describing the product defect, lot number and submitting your sales reciept or proof of purchase, or contact us at our customer service line. Replaced parts will be under the product´s original warranty coverage period. Damaged parts will become property of the company

There are no other warranties applicable to this product.

Turn static files into dynamic content formats.

Create a flipbook
BLZ_6547 by Madecentro Colombia - Issuu