Skip to main content

BDT_6495

Page 1


Deslice los cajones dentro del mueble / Slide the drawers into the cabinet

Alto: 123,4 cm

Ancho: 38,1 cm

Fondo: 35 6 cm

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams, cover them with the cover caps.

Height: 48,58 in

Width: 15,00 in

Depth: 14,02 in

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

LOT N°

Tel - (572) 691 17 00 PBX - (572) 695 91 81 Yumbo - Valle del Cauca - Colombia www.rta.com.co

BIBLIOTECA

RECOMENDACIONES

IMPORTANTES

No pintar el mueble.

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people

Avoid direct contact with water, fire or exposureto heat sources.

ADVERTENCIA

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

Por la seguridad del usuario se recomienda anclar el mueble a la pared. !

For the user safety, it is recommended to anchor the furniture to the wall.

*Centímetros / Inches

2 5/16 Drill bit.

Broca de 5/16".

Chazo Mariposa + Tornillo Ensamble Wall Anchor + Drywall Screw

REQUIRED TOOLS*

HERRAJES PARA ARMADO

ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

x46
Tarugo Wood Dowel x42 Minifix Minifix Cams
Perno Minifix Spreading Bolt x42
Tapa Adhesiva Minifix Cover Caps x30 (Color 1) x4
Deslizador Puntilla Nail-On Glide
Tapa Adhesiva Minifix Cover Caps x12 (Color 2)
Tornillo Lámina Flat Head Screw

HERRAJES PARA ARMADO ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Puntillas 1" 1" Panel Pin x20

Chazo Mariposa+ Tornillo Ensamble Drywall Screw+ Wall Anchor x2 x8

de Ensamble 2" 2" Drywall Screw

x2

Riel (Incluye Tornillos) Drawer Slides (Screws included)

Tornillo
Cantonera Wide Brace
Tornillo Lámina Flat Head Screw

PIEZAS DE ARMADO ASSEMBLY PARTS

MAX SUGGESTED LOADS CARGAS MÁXIMAS SUGERIDAS

ASSEMBLY RECOMMENDATIONS

RECOMENDACIONES DE ENSAMBLE

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble.

Assemble the cabinet between two people.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the box carton.

Carefully read all the steps and identify all the wood parts and hardware before assembling the cabinet.

Voltear
Rotate
Rotate to tighten.
Gire para apretar

Gire para apretar

Rotate to tighten.

Rotate to tighten.

Gire para apretar 2 1

Gire para apretar

Rotate to tighten.

para apretar

Rotate to tighten.

Gire

Turn static files into dynamic content formats.

Create a flipbook
BDT_6495 by Madecentro Colombia - Issuu