Skip to main content

BDT_6494

Page 1


Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams, cover them with the cover caps.

Alto: 40,6 cm

Ancho: 110 cm

Fondo: 35 6 cm

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Height: 15,98 in

Width: 43,35 in

Depth: 14,02 in

RECOMENDACIONES

IMPORTANTES

No pintar el mueble.

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people

Avoid direct contact with water, fire or exposureto heat sources.

ADVERTENCIA

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

HERRAJES PARA ARMADO

ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Deslizador Puntilla Nail-On Glide

Soporte Entrepaño Shelf support x3

Puntillas 1" 1" Panel Pin x18

Perno Minifix Spreading Bolt x25

Voltear Rotate x10

Bisagra Interior (Incluye Tornillos) Inset Hinge (Screws included) x6

x32
Tarugo Wood Dowel x25
Minifix Minifix Cams
Tapa Adhesiva Minifix Cover Caps x25 x10

CERRAR LAS BISAGRAS / CLOSE THE HINGES !

Gire para apretar

Rotate to tighten.

PIEZAS DE ARMADO ASSEMBLY PARTS

Bisagra Interior Inset Hinge

MAX SUGGESTED LOADS

CARGAS MÁXIMAS SUGERIDAS

ASSEMBLY RECOMMENDATIONS

RECOMENDACIONES DE ENSAMBLE

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble.

Assemble the cabinet between two people.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the box carton.

Carefully read all the steps and identify all the wood parts and hardware before assembling the cabinet.

Bisagra Interior Inset Hinge
Rotate to tighten.
Gire para apretar
Voltear Rotate
Bisagra Interior
Inset Hinge
Voltear
Rotate

Turn static files into dynamic content formats.

Create a flipbook
BDT_6494 by Madecentro Colombia - Issuu