Skip to main content

AMB_3877

Page 1


DOOR INSTALLATION

Chazo Mariposa/ Taquete + Tornillo ensamble / Plastic wall anchor

SE SUGIERE ANCLAJE A PARED MEDIANTE CHAZO+TORNILLO DE ENSAMBLE (NO INCLUIDOS) / FIXING THE CABINET TO THE WALL ITS SUGGESTED WITH PLASTIC WALL ANCHOR + DRYWALL SCREW (NOT INCLUDED)

UBICAR EL ENTREPAÑO MOVIL / PLACE THE MOBILE SHELF

AJUSTE DE ALTURA / HEIGHT ADJUSTMENT AJUSTE DE PROFUNDIDAD / DEPTH ADJUSTMENT

Al finalizar el ajuste, cubra las cajas con las tapas adhesivas/ After tightening all the panels, cover the minifix camswiththeadhesivecaps.

Al terminar de armar, desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / After finishing the assembly, take off the adhesives. (In case of glue residues,wipethemwithalcohol) A C B J I I F G D H

AJUSTE LATERAL / LATERAL ADJUSTMENT

Alto/ 189 cm / Height: 74,41 in Ancho/ 80 cm / Width: 31,49 in Fondo/ 52,3 cm / Depth: 20,59 in

VOLTEAR EL MUEBLE CUIDADOSAMENTE PARA INSTALAR LOS FONDOS / CAREFULLY FLIP THE CABINET TO ASSEMBLE THE BACK PANELS

RECOMENDACIONES IMPORTANTES

KEY RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets. O O O O O O

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

Limpie con paño seco , / Clean with a dry cloth.

HERRAJES BÁSICOS PARA MUEBLES RTA

BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface. J J B D H H 3mm 3mm

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

A

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly. RECOMENDACIONES DE ENSAMBLE / ASSEMBLYRECOMENDATIONS

MINIFIX / CONNECTOR - DOWELS

1 2 3 A B

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

(3)Tightthepanelsbyturningtheminifixcam180°.

TARUGOS O TAQUETES / FLUTED DOWELPIN

It´s ashortandthickpieceofwood,1,2to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence. 180° x 2 1 caja minifix / dowels hole

Esunpedazodemaderacortoygrueso,deaproximadamente3a10cmdelargo,quesirveparaamarrarelmuebley darleresistencia.

RECOMENDACIONES IMPORTANTES / KEY RECOMMENDATIONS

PESO MAX. SUGERIDO EN MUEBLE (Kg) / MAX SUGGESTED LOAD (Kg)

Se recomienda armar el mueble sobre la caja o una superficie lisa para no rayarlo. It is recommended to assemble the product on the box or on a flat surface to not scratch it.

VOLTEAR TURN OVER

Voltear el mueble cuidadosamente para ensamblar los fondos. Carefully turn over the cabinet to assemble the back panels.

NOTA: La resistencia a las cargas puede variar dependiendo si es una carga distribuida o una carga puntual, las gráficas corresponden a cargas puntuales, NO exceder los pesos sugeridos / NOTE: The load capacity depends if it is a point load or if it is an uniform distributed load, do not exceed the suggested loads.

Tarugo/ Fluted Dowel Pin x44

HERRAJES PARAARMADO ASSEMBLY

HARDWARE

x16

Tornillo Lámina/ Sheet Screw

Perno minifix/ Spreading Bolt

Deslizador/ Nail-On Glide x8

Minifix/ Minifix Cams

Tapa Adhesiva

Minifix Color 1/ Cover Caps

x2

Manija/ Handle

x2

Soporte Tubo ovalado/ Closet Rod Support x6

Bisagra Interior/ Inset Hinge x4

Soporte entrepaño Movil/ Mobile Shelf Support

Tubo ovalado/ Closet Rod

x30

Puntillas/ Panel Pin x1

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

x12
Tapa Adhesiva Minifix Color 2/ Cover Caps x1
Perfil en H/ H Profile

PIEZAS DEARMADO ASSEMBLY PARTS

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE CABINET, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT

Girar 180° / Rotate 180°

Girar 180° / Rotate 180°

VOLTEAR TURN OVER

Turn static files into dynamic content formats.

Create a flipbook