Skip to main content

ALR_5989 28 julio 2026

Page 1


Hinge adjustment

Door Installation

Instalación de las puertas 5

Depht adjustment Ajuste de profundidad 2 Ajuste de las bisagras 1

Height adjustment Ajuste de altura 4 Side adjustment Ajuste lateral 3

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams, cover them with the cover caps.

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Alto: 210 cm

Ancho: 60 cm

Fondo: 59,5 cm

LOT N°

Height: 82,68 in

Width: 23,62 in

Depth: 23,43 in

ALACENA SOLNA Solna Cupboard

RECOMENDACIONES

IMPORTANTES

No pintar el mueble.

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people

Avoid direct contact with water, fire or exposureto heat sources.

ADVERTENCIA

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

*No incluidas y no se muestran en tamaño real.

*Not included, and not shown actual size

HERRAJES PARA ARMADO

ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

x66

Tarugo Wood Dowel x68

Minifix Minifix Cams

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

x8

x3

Perno Minifix Spreading Bolt x68

Pegante Glue
Tapa Adhesiva Minifix Cover Caps x70
Bisagra Parche (Incluye Tornillos) Full Overlay Hinge (Screws included)
Tornillo Lámina Flat Head Screw x16

HERRAJES PARA ARMADO ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Manija Handle (Incluye tornillos) x1

Pata Leg x3

Vidrio Glass

Chazo Mariposa + Tornillo Ensamble Wall Anchor + Drywall Screw x2

x4

PIEZAS

PARTS

*VISTA FRONTAL / FRONT VIEW

*Centímetros / Inches

Fixing the cabinet to the wall Instalación del mueble a la pared

5/16 Drill bit.
Broca de 5/16".
Chazo Mariposa + Tornillo Ensamble Wall Anchor + Drywall Screw x2

MÁXIMAS SUGERIDAS

MAX SUGGESTED LOADS

RECOMENDACIONES DE ENSAMBLE

ASSEMBLY RECOMMENDATIONS

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble.

Assemble the cabinet between two people.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the box carton.

Carefully read all the steps and identify all the wood parts and hardware before assembling the cabinet.

Hx3
Voltear Rotate
Ix3

Rotate to tighten.

Aplique una gota de pegamento y golpee suavemente la pieza para ajustar el ensamble. Repita esto en todos los ensambles

Gently hit the pieces with a rubber hammer to adjust the joint. Repeat this in the following steps.

Gire para apretar

Rotate to tighten.

Gire para apretar.

Rotate to tighten.

CLOSE THE HINGES/ CERRAR LAS BISAGRAS

Gire para apretar.

Rotate to tighten.

Slide the back panels inside the cabinet. Deslice los fondos dentro del mueble.

Voltear
Rotate

Gire para apretar.

Rotate to tighten.

CLOSE THE HINGES/ CERRAR LAS BISAGRAS

Bisagra Parche Full Overlay Hinge
Voltear Rotate

Gire para apretar

Rotate to tighten.

Gire para apretar

Rotate to tighten.

Gire para apretar.

Rotate to tighten.

Turn static files into dynamic content formats.

Create a flipbook
ALR_5989 28 julio 2026 by Madecentro Colombia - Issuu