Skip to main content

ALC_4610 28 julio 2026

Page 1


Door Installation

Después de ajustar todas las cajas minifix, cúbralas con las tapas adhesivas.

After you finish the adjustment of the cams, cover them with the cover caps.

Al terminar de armar, desprenda las letras adhesivas.

After you finish assembling the cabinet, take off the adhesive letters.

INSTRUCCIONES DE ENSAMBLE ASSEMBLY INSTRUCTIONS

Alto: 200 cm

Ancho: 200 cm

Fondo: 52.1 cm

LOT N°

Height: 78,74 in

Width: 78,74 in

Depth: 20,51 in

Tel - (572) 691 17 00

PBX - (572) 695 91 81

Yumbo - Valle del Cauca - Colombia www.rta.com.co

RECOMENDACIONES

IMPORTANTES

No pintar el mueble.

El mueble debe ser usado únicamente en interiores, no exponer al sol directo

Limpiar los herrajes metálicos con un paño seco

NO sobrecargar el mueble (ver las cargas sugeridas).

No golpear ni martillar el mueble (solo cuando se indique).

Limpiar con un paño ligeramente húmedo, usar jabones suaves.

No arrastre el mueble, levántelo entre dos personas.

Evite el contacto directo con el agua, el fuego o la exposición a fuentes de calor

IMPORTANT RECOMMENDATIONS

Do not paint the cabinet.

The cabinet MUST be used exclusively indoors, do not expose to direct sun.

Clean metallic hardware with a dry cloth.

Do NOT overload the cabinet (see suggested loads).

Do not hit or hammer the cabinet (just when indicated).

Clean with a slightly damp cloth, use gentle soaps.

Do not drag, lift and move between two people

Avoid direct contact with water, fire or exposureto heat sources.

ADVERTENCIA

Nunca permita que los niños escalen o manipulen el mueble, la caída de este puede provocar lesiones graves o la muerte

Never allow children to climb or manipulate the cabinet, furniture tip over can cause serious injuries or death.

*No incluidas y no se muestran en tamaño real.

*Not included, and not shown actual size

HERRAJES PARA ARMADO

ASSEMBLY HARDWARE

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente

Tapa Adhesiva Minifix Cover Caps x100

Tornillo Lámina Flat Head Screw x52

Please check that the hardware content is correct. If any item is missing, please call to our customer service line

Bisagra Parche Incluye Tornillos Full Overlay Hinge Includes Screws x8

x128 x2

Puntillas Panel Pin Cerradura Incrustar Lock with Key

Includes Screws

Bisagra Semi Parche Incluye Tornillos

Half Overlay Hinge Includes Screws x6

Platina Cerradura Lock Brace x2 Incluye Tornillos

Deslice los cajones dentro del mueble.

Slide the drawers inside the cabinet.

x100
Tarugo Wood Dowel x100
Minifix Minifix Cams
Perno Minifix Spreading Bolt x100

Alinee la parte superior de la puerta con la ranura de la pieza D

Align the upper part of the door with the D panel groove

HERRAJES PARA ARMADO ASSEMBLY

Compruebe que el contenido de los herrajes sea el correcto. En caso de que falte alguna pieza, por favor llame a nuestra línea de atención al cliente.

HARDWARE

Please check that the hardware content is correct. If any item is missing, please call to our customer service line.

x10

Manija Acero Incluye Tornillos Handle Includes Screws x8

Soporte Tubo Ovalado Closet Rod Support

Rodachina redonda Wheel castors

Ovalado Closet Rod x2

Sistema Corredizo Sliding door roller kit

Incluye tornillos/ Screws Included

Tornillo de Ensamble 2" 2" Drywall Screw x2

Espejo Mirror

x2

x4 x8

Riel
Drawer Slides
x4
Tubo
Riel plástico Plastic Door Track

PIEZAS DE ARMADO ASSEMBLY PARTS

MAX SUGGESTED LOADS CARGAS

MÁXIMAS SUGERIDAS

ASSEMBLY RECOMMENDATIONS

RECOMENDACIONES DE ENSAMBLE

Ensamble el mueble entre dos personas.

Ensamble el mueble sobre una superficie plana y lisa, preferiblemente sobre un tapete o el cartón de la caja

Lea cuidadosamente las instrucciones e identifique todas las piezas y herrajes antes de empezar a armar el mueble.

Assemble the cabinet between two people.

Assemble the cabinet on a flat, smooth surface, preferably on a carpeted floor or the box carton.

Carefully read all the steps and identify all the wood parts and hardware before assembling the cabinet.

Voltear Turn Over
Bisagra Semi Parche/ Half Overlay Hinge
Rotate to tighten.
Gire para apretar

X 4

X 2

Be careful turning over the cabinet. Tenga cuidado al voltear el mueble.

Gire para apretar

Rotate to tighten.

Sostenga las piezas N, K y J para evitar su fractura.

Hold the pieces N, K and J for avoid your fracture.

Bisagra Semi Parche/ Half Overlay Hinge
Voltear Turn Over
Rotate to tighten.
Gire para apretar

Considere las perforaciones en la pieza “A” para la instalar las rodachinas y elija el orificio correcto de esta para colocarlas en su lugar / Consider the perforations in part “A” to install the wheel castors and choose the correct hole to put them into place.

X 2

Voltear Turn Over

Gire para apretar.

Rotate to tighten.

Hold the pieces O, K and J for avoid your fracture. Sostenga las piezas O, K y J para evitar su fractura.

Voltear Turn Over

Gire para apretar

Rotate to tighten.

Bisagra Parche Full Overlay Hinge

Sostenga las piezas L y M para evitar su fractura.

Hold the pieces L and M for avoid your fracture.

Gire para apretar

Rotate to tighten.

Gire para apretar

Rotate to tighten.

Coloque el riel plástico en la ranura

Place the plastic guide in the groove

Gire para apretar.

Rotate to tighten.

Voltear Turn Over

Gire para apretar.

Rotate to tighten.

Voltear Turn Over

Turn static files into dynamic content formats.

Create a flipbook