DOOR INSTALLATION
UBICAR EL ENTREPAÑO MÓVIL / PLACE THE MOBILE SHELF
AJUSTE DE ALTURA / HEIGHT ADJUSTMENT
Al finalizar el ajuste, cubra las cajas con las tapas adhesivas/ After tightening all the panels, cover the minifix cams with the adhesive caps.
AJUSTE DE PROFUNDIDAD / DEPTH ADJUSTMENT
AJUSTE LATERAL / LATERAL ADJUSTMENT
Al terminar de armar, desprenda los adhesivos (en caso de que queden residuos de pegamento, limpie la superficie con alcohol) / After finishing the assembly, take off the adhesives. (In case of glue residues, wipe them with alcohol)
Alto/ 160 cm / Height: 63 in
Ancho/ 62,4 cm / Width: 24,56 in
Fondo/ 20,3 cm / Depth: 8 in
By:
(572) 691 17 00
(572) 695 91 81
VOLTEAR EL MUEBLE CUIDADOSAMENTE / CAREFULLY FLIP THE CABINET
RECOMENDACIONES IMPORTANTES
KEY RECOMMENDATIONS
NO pinte el mueble / Do not paint the furniture.
NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.
NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.
NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets. O O O O O
NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).
NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.
SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.
Limpie con paño seco , / Clean with a dry cloth.
HERRAJES BÁSICOS PARA MUEBLES RTA
BASIC HARDWARE FOR RTA FURNITURE
1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.
2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.
3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly
4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface.
- Pulgadas /
* Herramientas NO incluidas/ Tools not included
Utilizar una broca de 5/16" para hacer las perforaciones en el muro/ Use a 5/16" drill bit to drill the wall.
Tornillo 2 1/2" + Chazo Mariposa/ Drywall Screw+ Wall Anchor
P ARED/ W ALL CHAZO/ WALL ANCHOR
Tapar las perforaciones que quedan expuestas con tapas minifix/ Cover the exposed drillings with minifix covers.
WALL
VOLTEAR EL MUEBLE CUIDADOSAMENTE PARA ENSAMBLAR EL FONDO / CAREFULLY FLIP THE CABINET TO ASSEMBLE THE BACK PANEL
El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly. RECOMENDACIONES DE ENSAMBLE / ASSEMBLYRECOMENDATIONS
MINIFIX / CONNECTOR - DOWELS
180°
1 2 3 A B
Sistema de unión compuesto por un perno (A) y una caja minifix (B).
(1) Se inserta la caja minifix dentro de la perforación ubicada en la cara de la pieza, la flecha debe apuntar siempre a la dirección de la perforación por donde entrará el perno.
(2) Se debe insertar el perno por su parte plástica en las perforaciones que se indiquen, luego se inserta la punta metálica en la perforación para que su cabeza quede al interior de la caja minifix.
(3) Girar la caja minifix 180° para apretar las dos piezas.
It´s a fitting system made of a spreading bolt (A) and a minifix cam (B).
(1) Insert the minifix cam in the hole placed in the face of the panel with the arrow ponting towards the hole where the bolt will fit.
(2) Insert the bolt with its plastic base in the shown holes, then insert the metallic bolt head in the holes so it fits inside the minifix cam.
(3)Tight the panels by turning the minifix cam 180°.
TARUGOS O TAQUETES / FLUTED DOWELPIN
caja minix / dowels hole
Es un pedazo de madera corto y grueso, de aproximadamente 3 a 10 cm de largo, que sirve para amarrar el mueble darle resistencia.
It ´s a short and thick piece of wood, 1,18 to 3,9 inches aproximately, which is used to tie the cabinet and give it resistence.
VOLTEAR TURN OVER
Se recomienda armar el mueble sobre la caja o una superficie lisa para no rayarlo. It is recommended to assemble the product on the box or on a flat surface to not scratch it.
NOTA: La resistencia a las cargas puede variar dependiendo si es una carga distribuida o una carga puntual, las grácas corresponden a cargas puntuales, NO exceder los pesos sugeridos / NOTE: The load capacity depends if it is a point load or if it is an uniform distributed load, do not exceed the suggested loads. C
Voltear el mueble cuidadosamente para ensamblar los fondos. Carefully turn over the cabinet to assemble the back panels.
PESO MAX. SUGERIDO EN MUEBLE (Kg) / MAX SUGGESTED LOAD (Kg)
Girar 180° / Rotate 180°