Skip to main content

ADB_4987 24 JULIO 2026

Page 1


Alto/ 187,5 cm / Height: 73.81 in

Ancho/ 120 cm / Width: 47.24 in

Fondo/ 51,5 cm / Depth: 20.27 in

Introduzca los cajones en la estructura

Para ensamblar los cajones al mueble, tenga en cuenta que el riel en el lateral de cajón debe estar en la posición que indica la figura 1. (con la rueda hacia atrás)

TEL (572) 691 17 00

PBX (572) 695 91 81

ARMARIO
Z-120
/Z-120 Wardrobe

RECOMENDACIONES IMPORTANTES KEY RECOMMENDATIONS

NO pinte el mueble / Do not paint the furniture.

NO lavar las manijas o tiraderas con jabones o elementos abrasivos / Do not wash handles or dumps with soap or abrasives.

NO golpear ni martillar el mueble (hágalo sólo donde se indique) / Do not hit or hammer the furniture (just do it where is indicated).

NO mojar o ubicar a la intemperie / Do not expose to rain or direct sun.

NO sobrecargue el mueble. no exceda el peso de 30 kilos para gabinetes de cocina / Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets.

NO permita que los niños manipulen el mueble, puede voltearse y lastimarlos / Do not allow children to handle the cabinets or drawers, they could get hurt.

Fijar el fondo al cajón, colocando una puntilla como lo indica la figura O M P

O M P

Limpie con paño seco , / Clean with a dry cloth. P P

SIEMPRE levante el mueble entre dos personas, NO lo arrastre / Do not drag thefurniture Lift it between two people.

HERRAJES BÁSICOS PARA MUEBLES RTA

BASIC HARDWARE FOR RTA FURNITURE

1.Abrir la caja del mueble y buscar la bolsa con los herrajes / Open the box and look for the hardware bag.

P2.Abrir el paquete y comprobar que el contenido de las piezas es correcto / Open the package and verify that the content of the pieces is correct.

3. Separe los herrajes para facilitar su identificación durante el armado / Separate hardware for easy identification during assembly.

4.Arme el mueble en un lugar limpio y en una superficie plana / RTAfurniture must be assembled in a clean place and on a flat surface.

Este proceso debe repetirse para el armado del otro cajón

El buen funcionamiento del mueble depende de un adecuado ensamblaje An excellent furniture´s performance relies on a solid and a suitable assembly. RECOMENDACIONES

MINIFIX / CONNECTOR - DOWELS

1 2 3 A B

Sistemadeunióncompuestoporunperno(A)yunacajaminifix(B).

(1)Seinsertalacajaminifixdentrodelaperforaciónubicadaenlacaradelapieza,laflechadebeapuntarsiemprea ladireccióndelaperforaciónpordondeentraráelperno.

(2)Sedebeinsertarelpernoporsuparteplásticaenlasperforacionesqueseindiquen,luegoseinsertalapunta metálicaenlaperforaciónparaquesucabezaquedealinteriordelacajaminifix.

(3)Girarlacajaminifix180°paraapretarlasdospiezas.

It´safittingsystemmadeofaspreadingbolt(A)andaminifixcam(B).

(1)Inserttheminifixcamintheholeplacedinthefaceofthepanelwiththearrowpontingtowardstheholewheretheboltwill fit.

(2)Inserttheboltwithitsplasticbaseintheshownholes,theninsertthemetallicboltheadintheholessoitfitsinsidethe minifixcam.

(3)Tightthepanelsbyturningtheminifixcam180°.

TARUGOS O TAQUETES / FLUTED DOWELPIN

caja minifix / dowels hole

Esunpedazodemaderacortoygrueso,deaproximadamente5a10cmdelargo,quesirveparaamarrarelmuebley darleresistencia.

It´s ashortandthickpieceofwood,1,9to3,9inchesaproximately,whichisusedtotiethecabinetandgiveitresistence. 180°

HERRAJES PARAARMADO ASSEMBLY

HARDWARE

x6 x6 x98 x50

Minifix/ Minifix Cams

Perno minifix/ Spreading Bolt Tornillo lamina/ Sheet Metal Screw

Tornillo de Ensamble 2¨/ Drywall Screw

Tapa Tornillo Ensamble/ Screw Cover Caps x28 x3

Color 1

Tarugo/ Wooden Pin

Soporte Tubo Ovalado/ Closet Rod Support

Perfil en H/ H Profile

Cantonera N°1/ Angle Brackets

Tapa Adhesiva Caja minifix/ Cover Caps x6 x12 x2 x1 x2 x44 x10 x6

Riel Sencillo 45cm/ Drawer Slides

Puntillas/ Panel Pin

Tornillo Manija/ Handle Screw

Color 2

Tapa Tornillo Ensamble/ Screw Cover Caps x22

Rodachina Bola/ Wheel Castors

Cazuela PR

Tope puerta

Deslizador parte superior

Deslizador parte inferior

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

Repetir el mismo procedimiento con las piezas PI Y PC

Introduzca los bordes de la placa en las ranuras, gire y apriete el tornillo

Ubicar primero la puerta PR y a continuación la puerta PL

Ubique el tubo sobre los soportes

Bisagra Semiparche 35mm/ Half Overlay Hinge

HERRAJES PARAARMADO ASSEMBLY HARDWARE

Bisagra Parche 35mm/ Full Overlay Hinge

Manija de Incrustar/ Handle Cerradura de Incrustar/ Lock

Corredera D-25 Ducasse/ Sliding Door

Manija 96mm/ Handle

TENER PRECAUCIÓN AL ABRIR LA BOLSA DE HERRAJES PARA NO EXTRAVIAR NINGUNO. COMPRUEBE QUE EL CONTENIDO DE LAS PIEZAS SEA EL CORRECTO. EN CASO QUE FALTE ALGUNA PIEZA O ESTE DEFECTUOSA DEVUELVA LAS PIEZAS AL ALMACÉN CON SU FACTURA PARA EFECTUAR EL CAMBIO DE LAS PIEZAS Y/O LOS HERRAJES LO MÁS PRONTO POSIBLE./ PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE IMPERFECTPIECESORHARDWAREASSOONASPOSSIBLE.

Tubo Ovalado/ Closet Rod

PIEZAS DEARMADO ASSEMBLY PARTS

ANTES DE EMPEZAR A ARMAR EL MUEBLE LEA DETENIDAMENTE LAS INSTRUCCIONES. SE RECOMIENDA ARMAR EL MUEBLE SOBRE LA CAJA O SOBRE UNA SUPERFICIE LISA Y CUBIERTA, PARA NO RAYARLO / BEFORE STARTING TO ASSEMBLE THE CABINET, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE

AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE

NO incluidas)

Tornillo ensamble 2"

RIELES/ DRAWERS SLIDES

Tornillo ensamble 2"

F F F C

RIELES/ DRAWERS SLIDES

Turn static files into dynamic content formats.

Create a flipbook
ADB_4987 24 JULIO 2026 by Madecentro Colombia - Issuu