Long Island’s Defense and Aerospace Trade Organization
A Message From Our Chairman
Dear Bell Flight Team,
I would like to thank you for letting us present a small sample of our robust and experienced defense industrial base here on Long Island. Your guidance in helping us at ADDAPT understand your supplier needs has strengthened our belief in the value we can bring to Bell Flight’s mission.
This book is a small sample of the suppliers here on Long Island that are AS9100 approved, experienced in supplying systems and components for both rotor and fixed-wing aircraft, and eager to support Bell Flight sustainment and new production. We hope this helps you to understand our capabilities and keeps our industrial base top of mind as you move forward into the exciting future Bell Flight has defined for itself. We want to be a part of that future.
John Spiezio
John Spiezio ADDAPT Chairman
addaptny.org
jspiezio@addaptny.org
516-790-7814
Introduction
ADDAPT is Long Island’s defense and aerospace trade organization, dedicated to securing private and government contracts to Long Island’s defense and aerospace companies.
Our incredibly deep industrial base and a highly educated workforce, gives us a distinct competitive advantage over the rest of the country.
Long Island’s rich history in defense and aerospace manufacturing, pioneered by companies like Grumman, IDO, Sikorsky, Republic, and Sperry, has established a robust tier two and tier three supply chain ready to meet the demands of OEMs and the Department of Defense.
152
Members Located Throughout Long Island Long Island’s Aerospace Trade Organization
Membership Expertise
Our members makeup a diverse, strong, and expansive supply chain. They represent a comprehensive range of technical services that are the driving force behind the region’s thriving aerospace sector.
From innovative design and manufacturing with cutting-edge components, to expert legal, accounting, and engineering support, ADDAPT’s members are committed to propelling Long Island’s aerospace industry to new heights.
Capabilities:
• Advanced Manufacturing
• Aerospace & Electronics Manufacturer
• Aerospace Fastener
• Aerospace Packaging
• Aerostructure Assemblies
• Aircraft Component Repair
• Aircraft Parts
• Airframe Design
• Airframe Manufacturing
• Airframe Parts Supply
• Autonomous Systems
• Aviation Ground Support
• Avionics
• Control Flight Systems
• Cyber Technology
• Distributor Fasteners Products
• Electronic Distribution
• Electronic Manufacturing Fabrication
• Engine Parts Supply
• Engineering & Design
• Fastener Assembly & Distribution
• Fastener Manufacturing
• Gear Design Manufacturing
• Global Logistics
• Hardware Distributor
• Heat Treatment
• Heavy Machinery
• Hydraulic Components
• Industrial Supply
• Integrated Systems
• Machine Shop
• Machining & Airframe Sub Assembly
• Maintenance Parts Supply
• Manufacturing & Design
• Mechanical Engineering
• Metal Processing
• Military Electronic
• Military Battery & Charging Stations
• Military Hardware
• Miniature Fastener Manufacturing
• Overhaul Services Parts Supply
• Plastic Fabrication
• Precision Assemblies
• Precision Machining
• Precision Welding
• Pumps & Valves Design and Manufacture
• Repair Parts Supply
• Research & Design
• Sheet Metal Fabrication
• Structural Assembly Manufacturing
• Testing & Engineering
Black Hawk Swashplate
Air Industries Group
NGJ MB Pod Complete
CPI Aero, Inc.
ADDAPT is Built On Relationships
Our Strategic Partners
About Our Company
Air Industries Group
Specializing in the machining and assembly of complex, flight critical items, Air Industries Group is designated as a small business, and is a publicly-traded company (NYSE: AIRI).
Founded in 1941, Air Industries Group (NYSE: AIRI) operates two centers of excellence in New York (Air Industries Machining Corp.) and Connecticut (Sterling Engineering), specializing in complex machining and assembly. Our facilities total over 200,000 square feet and employ approximately 185 highly-skilled workers.
Air Industries is a Tier 1 supplier to Original Equipment Manufacturers (OEMs), and a Prime Contractor to the U.S. Department of Defense. Our extensive range of precision products includes landing gear assemblies and subassemblies, mixer assemblies, rotor hubs, swash plates, bifilar assemblies, stabilator assemblies, vibration absorbers, flight controls, and components for aircraft jet engines and ground turbines. We have over 40 years of rotorcraft experience, supplying Flight Safety parts and assemblies in support of the Black Hawk and its derivatives, as well as the CH-53E, CH-53K, S-76, S-92 and S-61 programs.
Between 2021 and 2024, the Company invested over $13 million in new equipment and facility upgrades, adding 35,000 hours of machining capacity to our factory. Consequently, we have ample capacity available to support new projects, and to cultivate new partnerships.
Capabilities
Air Industries offers the technical expertise and program management that one would expect from a larger company, within the framework of a smaller, more agile, lower cost company. Our core competencies include:
• 5-axis machining of hard metals and aluminum
• Multi-spindle milling capability
• N/C turning and mill-turn capabilities
• High-speed, “lights-out” machining
• Integrated assembly and kitting
• Deep-hole drilling
• Honing
• Boring mill capability
• In-house painting
• In-house hydraulic testing
Manufacturing Envelopes:
• Milling: 120”
• Turning: 78”
• 5-Axis Machining: 52” cube, or 122” long
• Mill-Turn: 78”
• Hone: 16” dia. x 60”L
• Deep-Hole Drill: 6.5” dia. x 122”L
• CMM: 79” (X) x 130” (Y) x 59”Z
• Maximum Spindle Speed: 18,000 RPM
• Hydraulic Testing: 10,000 PSI
What sets us apart
The Company is supported by a robust Long Island supply chain, with many of our sub-tier suppliers and outside processors located within a 10-mile radius of our facility.
The Company’s ability to perform the most critical operations in-house, while integrating a multilevel bill of materials into a fully-assembled and tested product, maximizes the value-added to our customers, and mitigates risk.
The fact that this is accomplished within relatively small, agile, and customer-first framework makes Air Industries Group truly unique.
Contact: Gary Settoducato VP, Business Development
With a focus on connecting client needs with the right guidance and tools, I thrive on building productive long-term relationships.
Michael Borello: Brief History
Michael Borello is a seasoned banking professional with over 25 years of experience in commercial banking. Currently serving as the Senior Vice President and Business Banking Market Executive for the Long Island Market at Bank of America, Michael has dedicated his career to understanding the unique needs of local businesses. Since joining Bank of America in 2012, he has also held the position of Small Business Market Manager at both Bank of America and Chase Bank, where he began his career as a Small Business and Commercial Banker. Michael’s commitment to fostering sustainable growth is evident not only in his professional role but also through his volunteer work with organizations focused on hunger insecurity and home ownership, such as Long Island Cares and Habitat for Humanity.
Services Offered
• Strategic Financial Guidance: Tailored solutions that align with clients’ unique business goals.
• Team of Specialists: Access to a dedicated team focused on understanding and addressing specific client needs.
• Comprehensive Commercial Banking Solutions: Services for both short-term and long-term banking needs, including lending, treasury management, and investment solutions.
• Community Engagement: Commitment to local initiatives that support sustainable business practices and community welfare.
• Technological Resources: Utilization of advanced banking technology to enhance operational efficiency and competitiveness.
What Makes Michael Unique
• Local Expertise: Deep understanding of the Long Island market and its business landscape.
• Holistic Approach: Focus on not just financial needs, but also on helping businesses create a sustainable future.
• Proven Track Record: Extensive experience working with mid-size companies to achieve their financial objectives.
• Commitment to Community: Active involvement in local nonprofit organizations, demonstrating a dedication to improving the community beyond banking.
• Long-Term Partnership: A focus on building lasting relationships that prioritize the long-term interests of clients.
Contact: Michael Borello
Senior Vice President, Business Banking Market Executive
Address: 300 Broadhollow Road, Melville, New York, 11747
Falcon Rappaport & Berkman (FRB), founded in 2018, is a full-service law firm committed to redefining legal services through innovation, collaboration, and client-focused solutions. With over 65 attorneys, FRB offers specialized expertise in government contracts, including contract negotiation, compliance, bid protests, and dispute resolution, as well as government compliance and regulations across industries like data privacy, environmental law, and securities regulation. By leveraging an interdisciplinary approach, FRB not only addresses immediate legal challenges but also anticipates and prepares for future client needs, all while maintaining transparency and delivering exceptional service.
Since 1953 Greiner-Maltz has been engaged exclusively in the leasing, selling, appraising, and managing of industrial, commercial, retail, office, development, and investment property in Manhattan, Brooklyn, Queens, Long Island, New Jersey, Westchester, and Connecticut. The firms four offices are actively managed by Principals: John Maltz and Sharone Levy in Brooklyn and Queens; Tom Attivisimo on Long Island; Raymond Musalo in New Jersey; and Ayall Schanzer in Westchester.
Greiner-Maltz is a full-service firm specializing in commercial, industrial, retail, office, development, and investment transactions. Our office is strategically situated in the NY Metro marketplace to provide building-by-building, block-by-block market intelligence to meet your requirements.
Our multi-disciplinary property expertise and extensive experience serving the complete range of market participants ensures that our brokers deliver unparalleled knowledge, advice, personalized attention, and enthusiasm to each client we serve.
Our experienced brokers have deep knowledge of the local landscape and a broad network of contacts that ensures each assignment is expertly executed and yields optimal results.
Capabilities
Typical assignments handled by the Greiner-Maltz team:
• Acquisition or disposition of investment assets
• Ad valorem tax assessment appeals
• Arbitration
• Bankruptcy/reorganization
• Buy-sell agreements
• Charitable contributions
• Condemnation
• Construction financing
• Corporate asset transfers
• Depreciation studies
• Development feasibility
• Equitable distribution
• Estates
• Expert testimony
• Feasibility studies
• Hardship analysis
• Insurance requirements
• Investment tax credit
• Lease negotiations
•Mergers and acquisitions
• Mortgage financing
• Partnership analysis-disposition
• Partnership buy-outs
• Purchase analysis
• Recapitalization
• Sale/leaseback
• Tax abatement analysis
• Zoning-highest and best use studies
What Makes Us Different
Greiner-Maltz has been providing broker opinion of value, appraisals, consultations and value advisements for the past 70 years based on indepth, cutting-edge market data.
Our staff of over 40 associates continues to build a comprehensive database that forms the foundation for supportable and accurate valuations.
No other firm matches our unique commitment. From the Hamptons to the East River there is over 1 billion square feet of industrial and commercial real estate. Our stated policy is to specialize exclusively in this unique market.
Our clients insist on an valuation specialist with cutting-edge market knowledge. Our clients -manufacturing and service companies, attorneys, accountants and investment bankers - know that every decision in today’s real estate market is a critical one.
• Consultation
• Negotiation Representation
• Industrial and Office Park Development
• Property Management
• Space Analysis
Contact: Tom Attivissimo, CCIM Chief
Executive Officer
Address: 185 Express Street Suite 300 Plainview, NY 11803
Leading Advisors in Manufacturing & Distribution with Expertise in Aerospace and Defense
As the 55th largest accounting firm in the nation, Grassi is a premier provider of advisory, tax, and accounting services to businesses and individuals. Our firm specializes in delivering industry-specific business consulting, audit, tax, and technology services across key market sectors, with a strong focus on manufacturing and distribution, including the aerospace and defense subsegments.
Manufacturing & Distribution Expertise
Grassi’s Manufacturing & Distribution professionals have a proven track record of providing exceptional service and proactive advice to a diverse range of manufacturers and distributors. Our advisors possess extensive knowledge of the unique challenges these organizations face, particularly in the aerospace and defense industries. We draw from our deep experience to help clients make confident business decisions in this complex and evolving marketplace.
Industry Focus
Our M&D clients span various sectors, including:
• Aerospace and Defense
• High-tech and Electronics
• Building Materials
• Food & Beverage
• Pharmaceuticals
• Retail and Apparel
Comprehensive Services
We offer a wide range of services tailored to the needs of manufacturing and distribution companies:
• Business Advisory
• Audit and Accounting
• Tax Compliance and Consulting
• CFO Advisory and Accounting Management
• Forensic, Litigation Support and Valuations
• Technology Consulting
• Supply Chain Management and Optimization
Aerospace and Defense Specialization
Our team has particular expertise in serving the aerospace and defense subsegments. We understand the unique regulatory environment, complex supply chains, and technological demands of these industries. Our advisors help aerospace and defense manufacturers navigate challenges such as:
• Compliance with government contracting regulations
• Supply chain risk management and resilience
• Cybersecurity and data protection
• Research and development tax credits
• International trade compliance
Industry Leadership and Innovation
Grassi’s M&D advisors are at the forefront of thought leadership through active participation in industry associations and research initiatives. We continuously share our knowledge of industry developments with our clients, helping them implement strategies to manage change, mitigate risk, and improve operational efficiencies.
Whether advising on environmental issues, advanced technologies, cost containment, supply chain management, divestitures, or other business challenges, our M&D professionals provide a clear perspective on how to succeed in today’s competitive landscape.
For more information on how Grassi can support your manufacturing and distribution business, particularly in the aerospace and defense industries, contact Michael Violano, Partner, mviolano@grassiadvisors.com or visit our website, www.grassiadvisors.com.
Contact: Michael Violano
Partner
Address: 50 Jericho Quadrangle # 200, Jericho, NY 11753
The financial decisions you make today can help determine the future you build for yourself and your family. At Merrill, you work with a dedicated advisor who has access to an extended team of specialists — backed by award-winning1 research from BofA Global Research and insights from the Chief Investment Office — so you can tap into the thoughtful guidance and solutions you need at every step of life’s journey.
Insights
• Top-rated research and insights from BofA Global Research, named one of the top global research firms by Institutional Investor
• A 235-strong team of investment professionals in the Chief Investment Office who offer you timely market insights, due diligence and portfolio construction support
• A time-tested, disciplined investment process that helps you understand and manage risk, maintain appropriate levels of diversification, and stay invested — across market cycles
• 286 advisors recognized on the 2024 Barron’s “Top 1,200 Financial Advisors” list, published March 8, 2024, with rankings based on data as of September 30, 2023
Delivered with a personalized approach
• Innovation and personalized advisor service, which helped propel client satisfaction to 94% in 2023
• Tailored support for executives, including assistance with concentrated stock strategies,5 gifting and trusts,6 to help you pursue the personal, financial and wealth transfer goals that are most important to you
• Family Office Services, providing household accounting, reporting, tax planning, consulting and administration services for a level of clarity that helps you gain greater control over your wealth
• Investment and wealth structuring specialists familiar with the demands of multigenerational wealth who can offer guidance on strategies to help you maintain your wealth throughout your lifetime and for generations to come
Through a full range of solutions
• Exclusive investment offerings, including Premium Access Strategies and Private Market Opportunities, designed to offer enhanced levels of customization and investment opportunities, as well as flexible pricing
• A leading alternative investments platform with more than $81 billion in client assets under management and support from over 100 alternative investment professionals
• Specialized ultra-high-net-worth capital markets solutions to help you manage the risks of concentrated stock with structured products tailored to your investment strategy
• Sophisticated support for nonfinancial assets in the context of your overall needs and wealth management plan, including art, commercial real estate, timberland, farmland, private business, and oil and gas interests
Contact: Thomas P Riedy, CRPC™
Wealth Management Advisor
Address: 540 Montauk Highway West Islip, NY 11795
Phone: 631-376-2407
Email: Thomas_P_Riedy@ml.com www.ml.com
What’s Made On Long Island
Our Members
About Our Company
Aero-Glen International, LLC
Aero-Glen International is a stocking distributor of aerospace hardware, supporting defense, commercial and space industries. They are a world-class provider of customized kitting, bin management, and 3PL / 4PL integration services. The headquarters are located in the Dallas / Fort Worth area in our main 90,000 sq ft warehouse facility. Aero-Glen is the largest company under the Wencor Defense division of the Wencor Group, which is a subsidiary of the HEICO Corporation ($30B market cap, NYSE: HEI & HEI.A). We are AS9100D, AS9120B, ISO9001:2015 certified.
Aero-Glen is the exclusive integrator to USAF for the F-16 Service Life Extension Program (SLEP), a $400M, 10-year award providing structural upgrade kits, including Critical Safety Items (CSI), build-to-print detail parts and hardware, managing thousands of parts and hundreds of suppliers on behalf of USAF. In December 2022, Aero-Glen completed their CMMC 2.0 audit for cyber-security, receiving a SPRS score of 110/110 from their High Confidence Assessment conducted under the DCMA DIBCAC Joint Surveillance Program with Redspin as the 3rd party auditor. Aero-Glen received the “Heroes in Manufacturing” award at the NIST MEP for being the 1st contractor in the nation to complete the audit.
Capabilities
Fastening Hardware
Franchised / Authorized distributor for the top aerospace manufacturers in the world, including PCC, Howmet, Lisi, Novaria, Avantus, TriMas, CAM, etc.
Build-to-Print Parts
We distribute machined & formed parts, assemblies, castings, forgings, bent tubes, and other print items
Customized Kitting
Our kits can include structural, electronic & assembly hardware, machined & formed parts, tubes, assemblies, customer furnished parts, maintaining complete BOM traceability, serialization, FAIRs, WAWFs, etc.
Bin Management / 3PL / 4PL Integration Services
We offer VMI, POU, kanban, consignment, inventory programs to reduce carrying, material, operational costs through the delegation of supply chain activities.
What Makes Us Different
• Source delegated and key provider to top OEMs Lockheed, Sikorsky, Boeing, Bell, Raytheon, Gulfstream
• Kit success: In the last 12 months, we have shipped over 100,000 lines in kits, with only 7 rejections (99.997% yield). These kits include very complex requirements and can be over 600 child parts per kit.
• CMMC 2.0 Audited by DCMA (110/110)
• Financial backing of HEICO to support stocking needs
• Experienced people, robust processes, capable systems
• Dedicated team offering quality and customer service since 1976. We answer our phones and respond to email.
Contact: Jeff Furgo VP Business Development
Address: 13751 Independence Pkwy Fort Worth, TX 76177
Phone: 817-328-6600
Email: info@aeroglen.com www.aeroglen.com
About Our Company
AeroTech Processing Solutions
Aerotech Processing Solutions is a NADCAP-certified, vertically integrated special processing facility serving the aerospace and defense industries.
We are Hub Zone Certified and employ over 65 people in a 30,000 SF facility.
Our approval list is extensive and continually being expanded, it can be viewed on our website at www.aerotechprocessing.com. Some of our approvals include: NADCAP, Boeing, Sikorsky, Lockheed, United Technologies, Northrup Grumman, Goodrich, Collins, Parker Aerospace and SpaceX.
Key Differentiators
• NADCAP, ISO, ITAR,CMMC Certified
• Excellent Quality.
• Infrared and Robotic Precision Masking
• Competitive pricing
• 3 – 5 business day turn per process
• One-Stop Shop
• Hubzone Certified/Minority Owned Processes
• Sulfuric Acid Anodize
• Hard Anodize Specialists in Difficult Jobs
• Chromic Anodize
• Chem Film Types 1 & 2 (ROHS)
• Etch
• NDT – Fluorescent Penetrant Inspection
• Passivate
• Electroless Nickel
• Precision Masking
• Prime, Paint, Dry Film Lube
• NEW! EN Plating on Peek/Ultem Plastics Approvals
• Aerojet Rocketdyne
• BAE Systems
• Boeing
• Breeze Eastern
• Collins Aerospace
• Eaton Aerospace
• Hamilton Sundstrand
• L3 Harris Technologies
• Lockheed Martin
• Northrop Grumman
• Parker Aerospace Group
• Rafael
• Raytheon
• Rolls Royce
• Sikorsky
• United Launch Alliance
• United Technologies- Goodrich
Here is a basic outline of our capabilities:
• NDT
• Liquid Penetrant Inspection including pre-penetrant/dimensional etch
Chemical Processing:
• Anodize: TY I, IB, (Chromic), TY II, IIB (Sulfuric, This Film Sulfuric) Ty III (Hardcoat). Special strengths in masking, multiprocess and critical hardcoat.
In business since 1996, Aetna Forwarding, Inc. provides comprehensive logistics solutions and support services on a global scale.
Aetna Forwarding specializes in the End-to-End design and implementation of high quality solutions to complex logistical challenges.
A highly respected, service-oriented company built on strong and long-lasting client relationships, Aetna tailors services to meet customers’ specific needs, and is a single point of contact for everything related to logistics.
Core Competencies
• Air & Ocean Shipping Worldwide
• Customs Brokers with National License
• Armaments & Military Shipments
• Hazardous Materials
• Packing & Crating ISPM-15 Compliant
• Domestic Shipping Air/Motor/Rail
• Project Cargo & Breakbulk
• Critical Shipments
• Time-Sensitive Freight
• Trade Shows & Conventions
• Installation & Deinstallation
• White Glove Services
• Warehousing & Storage
• Transportation Insurance
Differentiators
• Small Business Committed to Outstanding Customer Care
• Team of skilled out-of-the-box thinkers solving difficult logistical problems
• 30 years of success shipping to/from every corner of the earth
• Experienced staff in all aspects of logistics planning and scheduling
•Continuous investment in employee skills training and technology
• Strong relationships with strategic partners globally
• In-house Customs Brokerage agents
• TSA Certified Screening Facility
• ITAR/EAR compliant
• CMMC2 ready. Awaiting only for certification to open
CAGE Code: 85LD6
DDTC Code: K-6952
SCAC: ANFJ FMC: 4641
IAC: EA9708005
CHB: 22338
DOT: 825207
EIN: 11-3307387
DUNS: 941975542
NAICS Codes:
488510 - Freight Transportation Arrangement
488991 - Packing and Crating
493110 - General Warehousing and Storage
484210 - Used Household and Office Goods Moving
493190 - Other Warehousing and Storage
481212 - Nonscheduled Chartered Freight Air Transportation
Clients
• Federal, State and Local Government Agencies
• Defense Contractors & Manufacturing Companies
• Trading Companies
• Importers and Exporters
Contact: Michael Siracusano
Address: 123 East Mineola Ave. Valley Stream, NY 11580
Machined Components and Sub-Assemblies for the Aerospace and Electronics Industries
About Our Company
Welcome to Aljo-Gefa Precision Mfg. - your premier supplier of high-quality machined components for the Aerospace Industry. Located in Old Bethpage, New York, we have been a family-owned business since 1954, with 70 years of experience in delivering precision engineering solutions.
• At Aljo-Gefa, we pride ourselves on our expertise in the Aerospace Industry, ensuring that our clients receive top-notch products that meet the highest standards. We are an ISO 9001:2015/AS9100:2016 and ITAR certified company, we uphold strict quality control processes to guarantee the superior performance of our components
Capabilities
Facilities List
Horizontals
Machine cell #1 -40 500mm pallets with 3 Horizontals connected to 2 setup stations
1) Hitachi Seiki HG-500 II Horizontal, 30” x 28” x 31” travel 6000rpm 4axis continuous 360 degrees 50 taper
2) Hitachi Seiki HG-500 II Horizontal, 30” x 28” x 31” travel 6000rpm 4axis continuous 360 degrees 50 taper
3) Hitachi Seiki HG-500 II Horizontal, 30” x 28” x 31” travel 6000rpm 4axis continuous 360 degrees 50 taper
Machine cell #2 - 24 500mm pallets with 2 Horizontals connected to 2 setup stations
1) Hitachi Seiki HG-500 Horizontal, 28” x 26” x 30” travel 4500 rpm 1 degree indexer 360 degrees 50 taper
2) Hitachi Seiki HG-500 II Horizontal, 30” x 28” x 31” travel 6000rpm 4axis continuous 360 degrees 50 taper
Okk PCV55 High speed 48”x22”x27.7” travel 10,000rpm
Comet 50 taper 58” x 24.5” x 28.5”
Leadwell M550 40 taper 30”x15”x25” travel 4500rpm
Enschu 40 taper 30”x15”x25” travel 4500rpm
Turning
Ikegai ,Tur26 MIll turn CNC lathe 13.7”x25.6”
Ikegai , FX25 CNC lathe 20” dia
Dianichi,B60 CNC lathe 15” dia
Support equipment available.
What sets us apart
What sets us apart from other shops is our Horizontal Machining Cells which can produce machined components lights out and unmanned 24-7. With robots to unload the machines, they run largely unattended. The main horizontal machining cell includes 5 horizontal machining centers. They have 64 pallets and are all equipped with 120 tools with a work envelope of 30x28x25. Ideal for meeting discrete delivery schedules, these cells eliminate the setup cost associated with follow on production, resulting in lower cost and added flexibility.
Contact:
Aljo-Gefa Precision Manufacturing, LLC
Address: 205 Bethpage Sweet Hollow Rd, Old Bethpage, NY 11804
Phone: 516-420-4419
Fax: 516-756-1995
Email: Info@aljogefa.com www.aljogefa.com
All-System Aerospace International
Worldwide Distributor, Exporter & Supplier
About Our Company
All-System Aerospace International is a worldwide leading supplier of U.S. manufactured helicopter, aircraft, and engine spares. With a quality system certified to AS 9120/ISO 9001, All-System has been a trusted distributor and quality supplier to US and FMS Military and helicopter operators for more than 46 years. Sustained economical stocking levels of key factory new spares and unmatched customer service has made All-System Aerospace International one of the most recognized and trusted names in the world. Our knowledge and long-standing business success in worldwide helicopter support makes All-System your ideal business partner. Small enough to react quickly, experienced enough to understand the supply chain, and a business ethos of the highest level makes All-System your best choice to stock and distribute your products.
Sustainment Solutions
We are more than a stocking distributor
Our products and services maintain and support aircraft fleets. We understand operator needs along with manufacturer capabilities and lead times. Utilizing our expertise, we “smart stock” inventory to shorten the supply chain, providing our customers with spares and lifetime maintenance solutions.
• Active Stock Inventory Management
• Long Term Agreements (LTA) / Basic Order Agreements (BOA)
• Transfer and / or Sale of Excessive Inventories
• Export Control & Packaging
• Quality Assurance
• Parts Supply
• Repair Management
New Product Distribution
The best parts from the best manufacturers
Throughout our 40+ years we have sought out and obtained representation of the best manufacturers that our operators and fleets require.
• Structural Airframe Parts
• Windows
• Floor Panels
• Seals/Gaskets
• Soundproof and Insulation Blankets
• Instruments and Controls
• Electrical Components
• Aircraft Consumables
• Composite and Metal Bonded Parts
• Fitting and Support Assemblies
• Hardware
• Hoses
• Filters
Let us support you today
We work hard to logically sustain economical stocking levels of key factory new spares. We are prepared to create a secondary inventory for your fleet specializing in Sikorsky UH60, Boeing CH47, Bell UH-1 and much more. We have 350+ years of combined aviation parts knowledge and expertise in the aerospace industry. Our experience, combined with our professional customer oriented service approach allows us to earn the reputation as a trusted aircraft parts distributor.
When you think helicopters, think All-System Aerospace.
Contact: Adam P. Zacek President
Address: 75 Beacon Drive, Holbrook, New York 11741, USA
Phone: 631-582-9200 x 114
Mobile: 631-338-3896
Email: sales@allsystem.com www.allsystem.com
About Our Company
American Aerospace Controls Inc.
American Aerospace Controls (AAC) designs and manufactures high-reliability current and voltage sensors and current shunts suitable for the harsh environments found in critical aerospace and defense environments. From the ocean depths (nuclear submarine life support systems) to outer space (Dragonfly mission to Titan – Saturn’s largest moon) and everything in-between, AAC can produce what you need.
Brief History
From the beginning in 1965, AAC’s core competency was electrical measurement and control solutions. Early products designed for application specific requirements established a reputation for their high-quality, compact and rugged designs, featuring low power consumption and weight. Experience gained from its earliest projects helped the company develop new technologies and evolved the company’s “Customer Focused” strategy, with emphasis on continuous quality improvement initiatives, as set forth by ISO9001 and AS9100 standards.
Today, some 60 years later, the company provides AC & DC current, voltage, power and frequency transducers shipping direct from its factory in Farmingdale, New York, USA, to customers worldwide. All products are 100% designed, developed and manufactured in the USA, each tested to rigorous quality standards.
• In-House Environmental Testing to Speed Development and Reduce Risk
• High-Reliability to Ensure Functionality
• Military or Commercial Qualification to Inspire Confidence
• ISO-9001 and AS9100
• Woman-Owned Small Business
What Makes AAC Unique?
AAC has the unique capability to either select a suitable sensor for their vast catalog or design one from scratch to fit your exact requirements. Once the design is complete, AAC excels in efficiently producing the parts in either small or large quantities.
Contact: Kevin McBrien VP Sales and Marketing
Address: 570 Smith Street Farmingdale, NY 11735
Phone: 631-694-5100
Email: kmcbrien@a-a-c.com www.a-a-c.com
Archimedes Products, Inc.
Archimedes Products is an ISO 9001 and AS9100 certified manufacturer of precision machined parts and assemblies. Established in 1968, Archimedes Products has been a continuously family-owned and operated small business supporting our nation’s aerospace and defense industries. Committed to partnering with our customers, we have provided parts to some of them for over 50 years.
About Our Company
Archimedes Products is a contract manufacturer seeking to expand our product portfolio by supplying components to military programs of record and production of commercial aircraft. Our company-owned 5800 square foot facility features six CNC mills with indexers and pallet work switchers, four CNC lathes, deburring equipment, and several manual mills, drill presses and lathes. We implement a variety of inspection equipment and product-specific inspection fixtures to validate conformity with customer drawings and consistency in production manufacturing. Our parts are completed after outside finishing by in-house helicoil insertion, engraving, ink-filling and parts marking. The precision production parts we manufacture range in size from wristwatch gear plates to aero-structural components. We manufacture parts from various metals including aluminum, steel, titanium, super-alloys, and hardened stainless steel, as well as some plastics and composites.
Capabilities & Qualifications
Parts and Assemblies:
• Hard-point Components
• Avionics Housings and Enclosures
• Radar and Navigation System Components
• Aircraft Structural Components
• Valve Bodies and Assemblies
• Ejection Seat Components
• Air Data System Components
• Flight Control Surface Linkages
• Precision Pump Housings
• OBIGG System Components
• Gear Box Housings and Gear Plates
• Sensor Bodies and Assemblies
• Electro-Optical Mechanical Assemblies
• Aircraft Fuel System Components
• Arc Barriers, Electrical Insulators, and Gaskets
Manufacturing Processes:
• CNC Milling and Turning
• Surface, Cylindrical, and Blanchard Grinding
• Lapping, Polishing, and Honing
• Installation of Threaded Inserts
• Steel Rule Die Cutting
• Engraving, Part Marking, and Ink Filling
• Mechanical Assembly
Finish and Outside Process
We provide our customers completely finished parts. Processes performed for Archimedes by qualified vendors include: Plating, Anodizing, Chem-Film, Painting, Welding, Brazing, Soldering, Heat Treat, X-ray, Dye Penetrant, Ultrasound and other NonDestructive Inspection
What Makes Us Different
As a contract manufacturer specializing in aerospace components, we distinguish ourselves from traditional job shops by fostering long-term partnerships and providing comprehensive manufacturing solutions that extend beyond individual parts. Our approach is rooted in Kanban and just-in-time contractual relationships, enabling us to optimize the entire production process for each individual product. For some assemblies, for over 30 years, we’ve built enduring relationships with customers, producing the same product while refining our processes to enhance quality, reduce costs, and ensure on-time deliveries. We view the Production Part Approval Process (PPAP) as a guiding philosophy rather than just a set of procedures, embedding quality and continuous improvement into our work. This mindset drives our commitment to delivering value and reliability, making us a trusted partner that evolves with our customers’ needs.
BAE Systems, Inc. and its nearly 41,000 people are part of a global defense, aerospace, and security company with approximately 100,000 employees worldwide. We deliver products and services for air, land, sea and space, as well as advanced electronics, intelligence, security, and IT solutions and support services. Our dedication shows in everything we design, produce and deliver— to protect those who protect us in a high-performance, innovative culture. We push the limits of possibility to provide a critical advantage to our customers where it counts.
With more than 80 years of Identification Friend or Foe (IFF) experience, BAE Systems has delivered over 16,000 transponders, 1,500 interrogators, and 6,000 combined interrogator transponder systems for use on new and existing platforms, including unmanned aerial vehicles, ships, and rotary- and fixed-wing aircraft. Our Greenlawn, NY facility is developing next-generation IFF solutions that support size, weight, power, and cost objectives and accommodate future upgrades. These systems are built on open-system architecture and allow for the rapid integration of new technologies through software updates. The flexibility of design and high performance get critical capabilities to the warfighter faster to best equip them in the evolving battlespace.
Contact: Kevin Raffloer
Business Development Director for Tactical Systems
Address: 5 Cuba Hill Rd, Greenlawn, NY 11740
Phone: 631-262-8140
Email: kevin.raffloer@baesystems.us baesystems.us
Image courtesy of BAE Systems: Future Vertical Lift graphic rendering
Image courtesy of BAE Systems: AN/DPX-7 reduced size transponder
About Our Company
Capy Machine Shop Inc.
Aerospace Structural Parts and Assemblies
Incorporated since 1984, we occupy our own 48,000 square foot ultra-modern facility. Capy Machine Shop Inc. is AS9100:2016 and ISO 9001:2015 certified, and we specialize in the manufacturing of complex aerospace parts and assemblies including flight safety critical parts and assemblies. We do light to heavy milling and turning of aluminum, titanium, steel, and numerous other exotic aerospace alloys. Our CNC machining centers are state of the art NC controlled. All major equipment is supported by a host of conventional machines, complete tool design and fabrication. Capy Machine Shop Inc.’s operating capability is 24 hours a day, 6 days a week. These complex precision machines are fully maintained by an in-house factory trained technical staff. Our programming department software includes CATIA V5-6, NX9, NCL and Mastercam. Our Quality Assurance Department utilizes two fully automatic CMM centers which are controlled with the use of PC-DMIS 2022. UNIPOINT quality software along with conventional inspection equipment is used. JoBBoss Software is employed as our integrated shop floor application software. Our team is available to help you with your needs.
Capy Machine Shop’s unique mix of business and experienced professionals has enabled the company to successfully manage new and long lasting customers. Superior manufacturing capabilities and quality control are why we represent a major resource for our customers both Government and private with manufacturing efficiency, productivity, quality and on-time delivery to match. Our partnerships include: BAE Systems, Brookhaven National Laboratory, Grumman, The United States Defense Logistics Agency, and the United States of America Navy and more...
The Engineering department is staffed by highly trained programmers
Our Engineering Department is staffed with highly skill engineers who are well versed in methodizing single details and complete assemblies of machined components ensuring that we meet our customers’ requirements. Using the aerospace industries latest CAM and CAD software our engineering department create 3,4 and 5 axis machine programs along with designing all necessary tooling for our Milling Centers. Capy Machine Shop Inc.’s engineers continually optimize our manufacturing procedures to improve machining times.
Achievements
Capy Machine Shop, Inc. has received multiple awards for it’s manufacturing process and capabilities. At Capy Machine Shop we strive for excellence through every step of the process . We judge our performance on a daily basis with a motivated staff that is not restricted from any imposed management thinking. Every person’s input is taken into consideration. Everyone is allowed to think outside the box.
We are dedicated to high quality and customer satisfaction.
Capy Machine Shop Inc. has been in business for over thirty years. We specialize in the manufacturing of complex aerospace parts and assemblies including flight safety critical parts. Capy Machine Shop Inc. is a company fully implementing continuous improvement techniques and oriented to maintain the tolerance and inspection demands of the 21st century and beyond. Through the use of continuous improvement, top management sets the pace, establishes the vision, and defines our goals and methods for improving our position as a benchmark quality supplier. Capy Machine Shop Inc. is an ISO 9001:2000 and AS 9100 certified corporation in accordance with the requirements of AS9104.
Contact: John Capacchione
Vice President
Address: 114 Spagnoli Rd, Melville NY. 11747
Phone: 631-694-6916
Email: jcapy@capymachine.com www.capymachine.com
About Our Company
Carter, DeLuca & Farrell LLP
Aerospace and Defense Practice Group
Carter DeLuca develops cost-effective IP strategies for academic institutions, research centers, and aerospace and defense companies. Our attorneys leverage expertise in aerospace and mechanical fields to align IP strategies with your goals, offering guidance on positioning your portfolio and managing licensing partnerships. If you’re aiming to lead in your field, Carter DeLuca can help you achieve your strategic research and business objectives.
Intellectual Property:
We help clients evaluate, obtain, protect, and defend their intellectual property rights with a coordinated strategy that meets their business goals. Carter DeLuca offers:
• Legal Counsel and Opinions on patentability, validity, freedom-to-operate, infringement and more
• Due Diligence investigations, studies and analyses
• Strategic Design, Positioning and Management of patent and trademark portfolios
Licensing & Partnering Agreements:
Carter DeLuca offers expert advice to enhance your IP value through licensing, mergers, acquisitions, and partnerships, helping you identify issues and uncover new opportunities.
A sampling of aerospace and defense technologies for which we can develop a successful IP strategy include:
Clad Metal Specialties is a woman-owned small business that was founded in 1985 as a full-service metal processing firm that produces high-quality precision metal cladding to customer specifications and requirements. We are proactive in product development, working alongside cutting-edge technological aerospace, defense, telecommunications, medical, and electronics companies to help brainstorm solutions that ensure optimum functionality and cost effectiveness from prototype to production. We offer customized Full Clads, Inlays, Toplays, and base metals in special thicknesses, sizes, and tolerances that comprise of Ferrous, Non-Ferrous and precious metals.
Clad metal composites offer the opportunity to combine desirable properties of individual metals and alloys into a material system that provides improved characteristics over individual alloys. These composites often provide cost savings by strategically placing precious metals or higher-cost alloys in exactly the area needed and or by using lighter or more readily available materials as the carrier metals in the core and using our molecular bond process to adhere the core with products that have the needed characteristics.
List of Products & Services
• Full Clad, Inlay Clad, and Toplays
• Heat Sink & Switch Materials, Stamped Parts
• Contact, Brazing & Semiconductor materials
• Rolling, Slitting, and Annealing
• Flatten, De-Camber, and Cut to Length
• In-house Roll and Blade Grinding
• Secondary stamping and plating
Product Application Sampling
• Helicopter Motor Blades
• Aerospace Electrical Relays & Switches
• Defense Actuator Support Plate
• Defense Night Vision
• Satellite Communications
• Satellite Solar Array Panels
List of Main Equipment
• (4) Bonding Mills
• (5) Rolling Mills (All equipped with state-of-the-art thickness control measurement gauges)
• (3) Reel-to-Reel Furnaces (One Water Quench and Two Air Cooled)
• (3) Slitting Lines
• (3) Tension-Level, Flatten, and De-Camber Lines
• (2) Flatten and Cut-to-length Lines
• Roll and Blade Grinder/Polisher
Certifications
ISO 9001: 2015 and AS9100D Certified
Contact:
Denise Marcoccia
CEO/President
Address: 1516 Fifth Industrial Court Bay Shore, NY 11706-3401
Phone: 631-666-7750
Email: Dmarcoccia@cladmetal.com www.cladmetal.com
Steven Maturo
Director of Operations
Address: 1516 Fifth Industrial Court Bay Shore, NY 11706-3401
Phone: 631-666-7750 Ext. 117
Email: Operations@cladmetal.com www.cladmetal.com
About Our Company
CPI Aero, Inc.
CPI Aero is a U.S. small business manufacturer of aerostructures and aerosystems for fixed wing aircraft, helicopters and airborne Intelligence Surveillance and Reconnaissance (ISR) and Electronic Warfare (EW) pod systems in both national security and commercial markets. Within the global aerostructures supply chain, CPI Aero is either a Tier 1 supplier to aircraft OEMs or a Tier 2 subcontractor to major Tier 1 manufacturers. CPI also is a prime contractor to the U.S. Department of Defense, primarily the Air Force. CPI Aero also provides Fusion and Resistance Welding, Large Diameter Tube Bending, and Electrical Harness and Enclosure Fabrication capability. In conjunction with its assembly operations, CPI Aero provides engineering, program management, supply chain management, and MRO services.
Why Customers Choose CPI Aero, Inc.
Make to Buy- CPI viewed as extension of OEM. Strong Program Management, Supply Chain Mgt, Mfg Engineering, Quality Mgt, and Production Ops
New Start Program Partner- Working “left of PO”, integrated into ERB/MRB Process at Prime, Providing Redline inputs to drawings, DFM/DFA Feedback, Accelerating Development timeline and speed to market
Capabilities & Qualifications
· CPI Aero has a single 171,000 square foot manufacturing facility located in Edgewood, NY which is 35 miles east of New York City on Long Island, NY.
· Small business specializing Assembly and Integration of tight tolerance, mixed-commodity Aerostructures & Aerosystems for fixed and rotary wing aircraft
· Program management/Integration
· Manufacturing Engineering
· Tool design
· Kitting & Supply Chain Management
· Welding (NADCAP Certified)
· Tube-bending
· Electrical Wire Harness and RF Enclosure Fabrication
· Supply Chain Mgt supporting Tier1 Programs and Internal Build
· Manufacturing Engineering Expertise.
· Design for Manufacturing & Design for Assembly (DFM/DFA)
· Rehabilitation of existing Program of Record
· Tool Design
· Digital Configuration Control
· Producer of Interchangeable & Replaceable Complex Structural Assemblies
Resourcing from Poor Performer – Numerous examples where CPI took over Program and in relatively short period of time, developed OpPlan, Novated sub-contracts, resourced subcomponents, managed build and met challenging production ramp and delivery commitments
Strong 2nd Source Supplier – Risk Reduction for High Rate Production Programs, providing needed capacity and redundancy.
Small Business – CPI qualifies as a Small Business by Federal NAICS Code Standards. This allows us to bid on Small Business Set Asides but also allows us to partner with Primes/OEMs/Large Tier1s to increase Small Business Supplier content.
Contact: James “Jay” Mulhall Vice President, Business Development
Address: 91 Heartland Blvd Edgewood, NY 11717
Phone: 516-314-7543
Email: jmulhall@cpiaero.com www.cpiaero.com
Introduction to DiFruscia Industries (DFI)
DiFruscia Industries (DFI) has been a trusted partner in the aerospace, defense, and precision manufacturing sectors for over 30 years. Our dedication to quality, innovation, and efficiency has made us a leader in surface treatments and metal finishing, with a focus on meeting the stringent requirements of the aerospace industry. We continually strive to exceed expectations through state-of-the-art technology, sustainability efforts, and an unwavering commitment to quality and compliance.
Core Capabilities
At DiFruscia Industries, we offer a comprehensive range of metal finishing and coating services, tailored to meet the specific demands of the aerospace sector:
· Anodizing & Hard Coating: Our anodizing services, including sulfuric anodizing and hard coating, provide excellent corrosion protection, enhanced durability, and increased wear resistance for aluminum components, making them ideal for aerospace applications requiring high precision and longevity.
· Electroless Nickel Plating: We offer electroless nickel plating, which provides a uniform coating across complex geometries, improving corrosion resistance, hardness, and wear properties—critical for mission- essential aerospace components.
· Powder Coating: Our powder coating solutions meet the aerospace industry’s rigorous standards for both aesthetic appeal and functional protection. These coatings ensure long-term durability and resistance to chipping, scratching, and UV damage.
· Precision Masking & Specialty Coatings: We offer highly accurate precision masking services, ensuring surface treatments are applied with exacting detail to critical aerospace parts. Our specialty coatings further enhance the performance of components in demanding environments.
· LEAN Manufacturing & Automation: Using LEAN manufacturing principles, DFI has streamlined its operations to reduce waste and optimize efficiency, allowing us to deliver high-quality finishes in reduced timeframes, without sacrificing quality.
· AI-Driven Process Enhancements: We are at the beginning of our AI integration journey, focusing on predictive maintenance, real-time optimization of power supply, and process management. These innovations are designed to enhance operational efficiency, reduce downtime, and improve product quality by using data-driven insights.
Core Processes
DiFruscia Industries’ core processes are built around a dedication to quality, consistency,and efficiency. We adhere to industry-leading standards and continually refine our processes to maintain our leadership position in the aerospace sector:
· AS9100D Quality Management System: DFI operates under an AS9100Dcertified
· Quality Management System, which goes above and beyond the requirements of ISO 9001. This certification guarantees that we meet the aerospace industry’s most stringent standards for quality, traceability, and risk management.
· LEAN Manufacturing: Our LEAN approach focuses on continuous improvement, waste reduction, and process optimization. This allows us to maintain competitive lead times and cost efficiency, providing value to our aerospace clients while maintaining top-tier quality.
· AI-Driven Optimization: DFI’s AI-driven processes focus on real-time optimization of power consumption and the automation of predictive maintenance, enabling us to enhance efficiency and minimize downtime in production. As we advance our AI capabilities, we will further refine these processes to benefit our aerospace partners.
DiFruscia Industries, Inc.
ISO 9001:2015/ AS9100D/NADCAP
ITAR / DLA-JCP Registered
Our Sustainability and Environmental Initiatives
DiFruscia Industries is deeply committed to environmental responsibility and sustainability.
We actively pursue environmentally compliant practices and continually seek to reduce our environmental footprint.
· 100% Solar Power Offset: DFI owns and operates solar power equipment that generates a 100% offset to our grid consumption over a 12-month period. This commitment to renewable energy reduces our carbon footprint and aligns with the aerospace industry’s increasing focus on sustainable manufacturing.
· Waste Treatment & Recycling: Our waste treatment systems ensure that all by-products of our manufacturing processes are handled in an environmentally responsible manner, reducing waste and ensuring compliance with environmental regulations
Why Partner with DiFruscia Industries?
· Proven Aerospace Expertise: With extensive experience in the aerospace sector, DFI understands the unique demands of the industry and tailors our processes to meet the highest standards of quality and precision.
· Commitment to Continuous Improvement: Through our LEAN manufacturing initiatives and AI-driven process optimization, we consistently improve operational efficiency, reduce lead times, and enhance product quality—direct benefits for aerospace manufacturers like Bell Helicopter.
· Stringent Quality Controls: Our AS9100D and NADCAP certifications ensure that every component we deliver meets the stringent requirements of the aerospace industry, ensuring that Bell Helicopter receives only the highestquality products.
· Environmental Responsibility: Our commitment to sustainable practices, including our solar power offset and waste management programs, underscores our dedication to environmentally responsible manufacturing, aligning with Bell Helicopter’s own environmental goals.
Closing Remarks
DiFruscia Industries is eager to partner with Bell Helicopter, leveraging our advanced metal finishing capabilities, commitment to quality, and sustainability initiatives to support your mission of delivering world-class aerospace products. We are confident that our expertise and dedication to innovation will make us a valuable partner in achieving your operational goals.
Contact: Paul Decerbo
Business Development
Address: 1425 Cranston St, Cranston, RI 02920
Phone: 401-943-9900 ext. 118
Mobile: 401-484-6825
Email: pdecerbo@difruscia.com difruscia.com
About Our Company
EB Industries, LLC
Exceeding Expectations Everyday
At EB Industries, we have over five decades of specialized experience in high-precision welding solutions for the aerospace sector, uniquely positioning us as an invaluable partner for Bell Helicopter’s manufacturing needs. Our expertise in laser and electron beam welding allows us to achieve welds of exceptional precision and durability—qualities that are critical in the aerospace industry, where reliability, strength, and performance are non-negotiable. In addition to our welding capabilities, we offer a comprehensive suite of services including pre-weld processing like cleaning and assembly as well as post-weld processes like non-destructive testing and meticulous inspection, all designed to ensure that every component leaving our facility meets the stringent quality standards expected by top aerospace manufacturers. Our AS9100 and NADCAP certifications demonstrate our commitment to maintaining industry-leading quality management practices, and our investment in state-of-the-art technology allows us to remain at the forefront of welding innovation. This dedication to excellence, paired with our deep knowledge of complex aerospace applications, enables us to deliver consistent results even with challenging materials and intricate geometries. As a trusted supplier to multiple sectors where precision is paramount, EB Industries is well-prepared to meet the rigorous demands of Bell Helicopter, helping drive their mission for safety, performance, and innovation in every flight.
Capabilities
Electron Beam Welding
• 6 Electron Beam Welders
• Up to 76” in Length (With Chamber Extensions as Needed)
• Full In-House Machine Shop and Tooling Capabilities
• Visual Inspection
• Fine and Gross Leak Testing
• Non-Destructive Testing Including Dye Penetrant Testing, Radio graphic, Ultrasonic and Physical Testing Are Available Through Local Partners
What Makes Us Different
EB Industries stands out in the welding industry by combining exceptional quality, rapid turnaround times, and a consultative approach to weld joint design, setting us apart as a preferred partner for manufacturers with demanding requirements. Our commitment to quality is reflected in every step of our process, from precise welding techniques to comprehensive inspections and testing, ensuring that each component meets or exceeds industry standards. With an agile production process, we deliver quick turnarounds without compromising quality, a critical advantage for clients with tight project schedules. Moreover, our consultative approach means we collaborate closely with our clients, offering expert guidance on weld joint design to optimize strength, performance, and cost-effectiveness, ensuring the final product fully aligns with project goals.
Contact:
Cory Yaeger Director of Operations
Address: 90 Carolyn Boulevard Farmingdale, NY 11735
East/West Industries, Inc., located in Ronkonkoma, New York, is a world leader in the design, development and production of crash attenuating aviation seating systems, life support systems and ground support aviation equipment. Founded in 1968, our focus has always been saving aircrew lives. With products supporting over 25 military and commercial aircraft, we are consistently recognized by major OEM’s and DoD’s worldwide for being a top supplier with a laser focus on quality. As a “mini-prime”, we boast a wide range of capabilities that span the entire product life cycle, from engineering and manufacturing to quality and logistics, and follow-on product support. Our seasoned engineering and manufacturing professionals pride themselves in finding unique solutions to meet the specific needs of our customers. East/ West Industries, Inc. is a woman-owned small business and is AS9100 certified.
East/West’s products are trusted by leading defense contractors and aircraft manufacturers, including Sikorsky Aircraft, Boeing, Northrop Grumman, Lockheed Martin, Bell Helicopter, and the U.S. Department of Defense. Their offerings include crashworthy aircraft seats, emergency oxygen systems, survival kits, and restraint systems, as well as custom solutions for critical aircraft structures like doors, hatches, and equipment bays. They also specialize in ground support equipment, such as the Master Crane® hoisting system and custom test stands. With products supporting over 25 military and commercial aircraft, East/West is known for consistently delivering high-quality, life-saving solutions.
Capabilities
• Engineering: R&D, Design, Manufacturing, Testing, Product Support
• Upgrade, Refurbishment, and MRO: Aircraft Seats, Survival Kits & Emergency Oxygen Systems, Aqueous Cleaning for Oxygen, Pressure Vessel Testing
• Support Services: Installation, Technical Publications, Spares (Components and Assemblies)
• Bell FLRAA – Troop and Gunner Seats
• Bell 505 – VIP and Utility Crashworthy Seats
• Boeing CH-47D/F Chinook Block I & II – Crashworthy Crew Chief Seat, Improved Troop Seat, Cargo Ramp Gunner Seat, Mobility Box Troop Seat
• ACES II – Ejection Seat Restoration & Emergency Oxygen System Enhancement
• NACES Survival Kit & Enhanced Emergency Oxygen System
• Master Crane® Floor Portable Crane
East/West’s engineering capabilities are enhanced by cutting-edge tools like Solidworks, Catia, ANSYS, and LS Dyna, allowing their team to design innovative, safe, and efficient solutions. Their products are built on a foundation of hard work, integrity, and a personal commitment to customer satisfaction, ensuring that they deliver not only technical excellence but also best-value results.
With a rich heritage and an unwavering focus on safety, East/ West Industries continues to be a trusted partner for military and commercial aviation worldwide, committed to one mission: “Saving aircrew lives is our first concern.”
Contact: Teresa Ferraro President/CEO
Address: 2002 Orville Drive North Ronkonkoma, NY 11779
Founded in 1957, Fluid Mechanisms has earned its reputation as a leading Tier 1 supplier in the aerospace and defense supply chain. Specializing in the manufacturing of complex airframe structures and assemblies, Fluid Mechanisms plays a critical role in producing missionessential components for rotorcraft and guided missile systems. With over 60 years of expertise, the company proudly supports major aerospace primes such as Boeing, Bell, and Sikorsky.
Operating out of a 45,000 square foot facility in Hauppauge, NY, Fluid Mechanisms is equipped with 20 CNC machining centers and specializes in high-speed machining of aluminum, titanium, and stainless steel. The company has the capability to produce large, intricate parts, handling materials up to 6 feet wide, 14 feet long, and 2 feet in diameter. Their advanced machining processes ensure exceptional precision and reliability, delivering parts that are critical for flight safety and performance.
Fluid Mechanisms offers more than just machining expertise. They provide complete aerostructure and assembly services, utilizing stateof-the-art NC programming platforms like Catia V5 and Mastercam, and advanced quality verification tools such as PC-DMIS. Their 3, 4, and 5-axis machining capabilities allow them to produce highly complex components to the most demanding specifications. Whether working with aluminum or exotic alloys, the company consistently delivers high-quality, large-format parts to meet the stringent needs of the aerospace and defense sectors.
Services:
• 5 axis mill-turn
• 3/4/5-axis vertical and horizontal milling
• 3 axis horizontal turning
• Mechanical Assembly; Adhesive, Epoxy and Electrical Bonding; Environmental Sealing
• Special Process Management – Heat Treat, Anodize, Prime, Paint, NDT, Passivate
With AS9100 and ISO 9001 certifications, Fluid Mechanisms is dedicated to maintaining the highest standards in product quality, customer service, and on-time delivery. As a subsidiary of The Metacomet Group, the company continues to drive innovation and exceed customer expectations in every project.
Fluid Mechanisms welcomes the opportunity to solve your most critical aerospace challenges with precision, reliability, and a commitment to excellence.
In addition to machining, Fluid Mechanisms employs a skilled team of assemblers proficient in precision bearing installation, aerospace fasteners, and metal bonding. This comprehensive approach enables the company to handle the entire manufacturing process in-house, ensuring seamless integration and exceptional quality control from start to finish.
Contact: Josh McCaughey CEO
Address: 225 Engineers Road Hauppauge, NY 11788
Phone: 631-234-0100
www.fluid-mech.com
About Our Company
IEH Corporation
Since 1941, IEH Corporation has been manufacturing superior products for demanding applications. Whether it’s printed circuit board connectors, signal or power contacts, or custom interconnects, our focus is delivering the right connector solution for your application. Our interconnects and contacts employ hyperboloid connector technology, an advanced, proven interface designed specifically for the most stringent requirements and harshest environments.
As a Mil-DTL-55302 certified connector manufacturer, IEH has been supplying the defense and aerospace with our super Hyperboloid connectors and contacts for nearly 6 decades. Our valued long-standing customers include Raytheon, Lockheed Martin, Boeing, Northrup Grumman and many others.
IEH also has a long and celebrated history of supporting rotary-winged military and commercial aircraft for programs like Apache AH-64, V280 Valor and the SH-60 Seahawk to name a few.
We recently worked with Bell engineers in Texas on Mil-C-39029 contacts for circular connectors. Employing hyperboloid versions of these standard mil-spec contacts improves both the reliability and life of these connectors, as the hyperboloid wire basket eliminates fretting and corrosion, a recurring problem in circular interconnects.
Unique Benefits:
Impervious to Shock & Vibration
The low mass and resulting low inertia of the wires allows them to follow the most extreme excursions of the pin without loss of contact. Tests exceed 300 g’s without discontinuity.
100,000+ Cycle Lifespan
The burnishing action of the wires on the pin surface is nondestructive. Unlike the “plow” and scrape action of common designs, Hyperboloid’s gentle mating action enhances life.
Improved Current Carrying Capacity
The low contact resistance gives a lower °C rise from ambient under load. This feature often allows the user to operate the same size contact under higher load.
VLIF (Very Low Insertion Force)
Common sizes #22 and less average under one ounce per contact.
Low, Low Contact Resistance
The multiplicity of line contact, as opposed to point contact in other designs, provides an excellent interface exhibiting low contact resistance (often less than 1/2 of MIL spec. allowances). This characteristic also provides for a cooler running contact under load.
Contact: Dave Offerman
Email: dave@iehcorp.com
Phone: 718-492-9698 www.iehcorp.com
Frank Lester
Email: flester@iehcorp.com
Phone: 407-463-3389 www.iehcorp.com
About Our Company
Jamco Aerospace Inc.
Jamco Aerospace Inc., a woman-owned, minority small business, was founded in 1967 as Jamco Instruments and later acquired by Dr. Jack Lee in 1984. Under his leadership, the company rebranded as Jamco Aerospace, evolving into a premier provider of precision-machined components and sub-assemblies for the military and commercial aerospace industries. With over five decades of experience, Jamco is known for its expertise in fabricating complex parts and delivering comprehensive services that range from engineering to final assembly.
Jamco prides itself on being a “one-stop shop” for precision machining, including milling, turning, and assembly, as well as contract inspection services. Their lean manufacturing program, introduced at the time of contract award, optimizes processes by using state-of-theart evaluation, planning, and production techniques. This ensures that Jamco provides cost-effective solutions without compromising on quality or delivery time.
A key milestone for Jamco was achieving AS 9100 certification in 2005, a testament to their commitment to meeting the highest standards in the aerospace industry. The certification underlines their mission: to consistently deliver precision-machined parts and assemblies on time while continuously improving processes and customer satisfaction.
With advanced equipment like the OKUMA Millac 853PF-5X, Fortune Vertical Turning Lathe, and OKUMA Heritage ES-L 10, Jamco can handle a wide variety of materials and configurations. Their skilled engineering team is equipped with the latest software, including CATIA, Siemens NX, and Mastercam, allowing them to take on complex projects and offer 3D modeling for prototype development.
Services
3 AXIS Machining
• DMG DMF-500, 196” x 36” x 32” – 10,000 RPMs
• Visionwide VB2516 , 98” x 63” x 31” – 6,000 RPMs
• Okuma MB-66VA, 25” x 25” x 59” – 8,000 RPMs
• Okuma Genos M560V 41” x 22” x 18.6” – 15,000 RPMs, qty4
• Mag Fadal VMS4020FX, 40” x 20” x 16” – 8,000 RPMs
• Fortune Vcenter-140 , 55” x 27” x 27”- 4,500 RPMs
4 AXIS Machining
• Makino A81M, 35.4” x 31.5” x 40.1” – 12 pallet Robotic System –10,000 RPMs, qty2
• Okuma MB-8000h 51” x 43” x 49” – 2 pallets, 12,000 RPMs
• Okuma MB-8000h 29” x 29” x 29” – 6 pallets, 15,000 RPMs
• Akari Seiki Hs450i/6APC 25” x 24” x 26” – 6 pallets – 15,000 RPMs, qty 2
• Kuraki KHM-125 79” x 49” x 39”– 2 pallets 8,000 RPMs
• Kiwa KH-45G, 25” x 27” x 24”– -6 pallets 12,000 RPMs
5 AXIS Machining
• Okuma 853PF-5x, 126” x 33” x 28” –– 12,000 RPMs, qty2
• Cincinnati Milacron , 144” x 78” x 29” –– 5,000 RPMs
• Lathe
• Fortune Vturn26 , 28DIA” x 70”, 1,500 RPMs
• Okuma Heritage , 12DIA” x 20”, 3,000 RPMs Inspection
• Zeiss Contura MMZ K , 79” x 250” x 59”, Calypso
• Zeiss Contura G2 , 40” x 83” x24”, Calypso
• Cimcor Romer 5024”, PowerInspect Assembly
• Haeger 624
Company Information
• AS 9100
• ITAR
• DUNS: 042591487
• CAGE: 7G467
• NAICS
• 332710 Machine Shops
• 332721 Precision Turned Product Manufacturing
Contact: Linette Lee
Chief Executive Officer
Address: 121 East Industry Ct. Deer Park, NY 11729
Long Island Manufacturing Extension Partnership (LIMEP)…
Works with small and mid-sized Long Island manufacturers to help them create and retain jobs, increase profits, save time and money, and develop new customers to ensure our regional manufacturers contribute to a reliable DIB supply chain.
Mission Statement
Provide growth and innovation resources to small and mid-sized manufacturers on Long Island, assisting manufacturers to create and retain jobs, increase profits, and save time and money through consultant experts and workforce training. Also, to engage with larger companies to support their supply chain companies which fall in the small and mid-sized company category.
Vision Statement
To be the “go to” contact for all small and mid-sized Long Island manufacturers. LIMEP will work collaboratively with our internal experts, regional partners, and New York State MEP centers to connect needed resources to the manufacturers.
Impact to Long Island Manufacturing since 2016:
We are excited to welcome Bell Helicopter to Long Island and look forward to showcasing the exceptional capabilities and potential of our local manufacturers. Together, we can elevate the future of aerospace and defense manufacturing in our region.
Contact:
Amy Erickson
Executive
Address:
Email:
About Our Company
Lourdes Industries Inc.
Since 1954 Lourdes Industries Inc., a privately held company, has been a recognized leader in the manufacture of pneumatic, hydraulic, and fuel components for the aerospace industry. Lourdes prides itself on its ability to custom engineer components, precision machine specialty metals including titanium, nickel alloys, and heat-treated stainless steel, and builds complex electrical harnesses.
Lourdes continues to demonstrate an unrivaled commitment to quality by achieving and maintaining registration as an AS9100 and ISO 9001 certified company. Lourdes is ITAR compliant.
Capabilities
Lourdes can build to Bell’s Helicopter’s specifications with capabilities including:
Engineering and Design
• Finite Element Analysis
• CAD / CAM Integration
• HiTech Machining Centers
• 3D Printing Test lab
• High Pressure /High Flow Test Stands (Various medias (air, hydraulic and fuel)
• Computer Programmed Electronic Testing Training
• IPC-620 and JSTD-001 certified operators
• LCS - Laboratory Controlled Source
• Customers inspection Certifications
Quality Control Lab
• CMM
• Extensive Mechanical Tool Library
• Gage Calibration Software
• Microscopes
• Profilometer
• Hardness Testing
Product Line
• Engineering and Design
• Fluid Control
• Valves
• Fittings
• Electro-mechanical Assembly
• Harnesses
• Actuators
• Steering control assembly
• Power junction box
• Lock wireless fittings
Our aerospace projects cover the commercial and military sectors. Lourdes has fuel valves and braking system components on commercial airlines. We have implemented systems for dehydration of microwave antennas, swivels, gun cradle harnesses for the Phalanx Close-In Weapon System (CIWS), manifolds and swivels for the multiple launch rocket systems (MLRS), firing harnesses for RAM and Stinger missile systems and products in support of Missile Defense Agency (MDA) programs. Our parts for the military are represented in airborne, shipboard, land based and space programs.
Lourdes philosophy has always been to be a fast and flexible solution to our customers aerospace needs. We are structured to optimize design and manufacturing time, without sacrificing price and quality. We endeavor to provide the highest quality, best delivery, and lowest cost that meet customer needs.
Contact:
Tito Maresca
Vice President of Sales & Business Development
Address: 65 Hoffman Avenue, Hauppauge, New York 11788
Phone: 631-297-1825
Email: tmaresca@lourdesinc.com lourdesinc.com
Kevin Cullinan
Senior Vice President, Operations
Phone: 631-297-1821
Email: kcullinan@lourdesinc.com lourdesinc.com
MA Group USA, Blair-HSM
About Our Company
MA Group USA, headquartered in the United States, is a leading manufacturer of landing gear systems and actuation solutions, recognized for its commitment to quality and innovation. Established through the acquisition of Blair-HSM in 2018, the company brings over six decades of experience in delivering aerospace solutions critical to aircraft safety and performance worldwide. Blair-HSM is a trusted partner to major aerospace OEMs, collaborating with industry giants like Lockheed, Boeing, Sikorsky, and Gulfstream. Its offerings span the lifecycle of landing gear, including design, manufacturing, integration, and maintenance, repair, and overhaul (MRO) services. The company operates two advanced manufacturing facilities—HSM South in Leland, North Carolina, and Blair-HSM in Medford, New York—equipped for all production aspects, from custom design to rigorous in-house testing.
MA Group’s mission is built on three core values: a skilled workforce, deep industry roots, and a commitment to innovation. The company prides itself on its highly qualified engineers and technicians who leverage state-of-the-art technologies to deliver exceptional results. With a focus on sustainability, MA Group emphasizes green practices in its design and manufacturing processes, contributing to a sustainable future for aviation.
Dedication to research and development drives MA Group to pioneer advancements in aerospace technology, including innovative materials and additive manufacturing techniques. Their involvement in the European Clean Sky 2 research program underscores their commitment to fostering disruptive technologies that enhance aircraft performance while reducing environmental impact. Initiatives such as the T-WING and ANGELA projects exemplify MA Group’s role in developing next-generation landing gear systems that improve safety and efficiency.
Capabilities
Providing entire life cycle of Landing Gear and Actuation:
• Design, Build to Spec
• Manufacturing
• Integration
• MRO
Completely vertically integrated with all special processes (REACH Compliant), Non-Destructive testing and all functional testing “in-house”.
MAGROUP - Magnaghi Aereospace recognizes and promotes the principles of corporate social responsibility, economic and civil development, value creation for its stakeholders and well-being for the community.
Corporate Governance is oriented to protect and maximize the value of the company in the long term, through the optimal management of resources compared to strategic objectives, the effective control of business risks, the highest transparency towards the market and the integrity of decision-making processes, in the interest of all stakeholders.
Contact: Erick VandeWater
Business Development
Address: 3671 Horseblock Road, Medford, NY 11763
Phone: 631-924-6600
Email: evandewater@magroupusa.net www.magroup.net
As a government contractor, MA Group USA provides a holistic approach to aerospace manufacturing, ensuring seamless integration and support throughout the product lifecycle. Their adherence to rigorous quality standards, including AS9100 certification, reflects their commitment to operational excellence and customer satisfaction. With a legacy and vision for the future, MA Group USA remains a key player in the aerospace industry, dedicated to ensuring that its products contribute to safer skies for everyone.
John Ryan
Business Development
Address: 3671 Horseblock Road, Medford, NY 11763
Phone: 631-924-6600
Email: jryan@magroupusa.net www.magroup.net
About Our Company
Metadure
Metadure and its predecessor company was founded more than 77 years ago and, has succeeded by keeping costs low and pricing fair while maintaining steady and satisfied customers throughout the decades.
Who We Are
Metadure is an OEM of military ground support equipment based in Farmingdale, New York. We manufacture UALS trailers, Fuel Trailers, Nitrogen, Oxygen and Hydraulic Fluid servicing equipment that support military aircraft used by U.S. and NATO forces.
Aircraft Parts Manufacturing
Metadure acquired capabilities, manufacturing rights and intellectual property of Nell-Joy Industries, Inc. and Aeronautical Components Inc. This highly experienced team includes several key engineering and administrative personnel that enabled a seamless transition into this area of manufacturing. Our OEM capabilities now include rudder fludder dampers, cabin temperature sensors, shimmy dampers, shaft dampers, tie rods, link assemblies, synchro assemblies and many other components for fixed wing and rotary-type aircraft.
NITROGEN SERVICING CART, HIGH PRESSURE
P/N: A12794 NSN: 3920-01-327-6831
Metadure’s High-Pressure Nitrogen Servicing Cart is a mobile, self-contained piece of field support equipment for use in aircraft line servicing of accumulators, struts and tires. The Servicing cart includes a 30:1 Booster Pump, Tank Carriage, Hose Racks and Hoses suitable for use on aircraft flight line servicing. This unit can provide a regulated 3500 PSI maximum working pressure output and is towable at a maximum speed of 15 mph. Special note: In 2021, Metadure built and modified quantity 14 of these nitrogen hand trucks for the U.S. Presidential helicopter program under a contract with Sikorsky.
Capabilities
SHIMMY DAMPER
P/N: 309944 NSN: 1620-00-915-7105
Metadure’s line of Shimmy Dampers are used for Front Nose Landing Gear. In 2022, Metadure acquired capabilities, manufacturing rights and intellectual property of Aeronautical Components Inc. Our OEM capabilities now include rudder fludder dampers, cabin temperature sensors, shimmy dampers, shaft dampers, tie rods, link assemblies, synchro assemblies and many other components for fixed wing and rotary-type aircraft.
Throughout its long history, Metadure Parts and Sales has become an invaluable partner and supplier to larger companies providing:
• Knowledge of American defense contracting and subcontracting
• Defense and Security solutions provider
• OEM of Ground Support Equipment
• Business development
Customers
Metadure customers include Lockheed Martin, General Dynamics, Sikorsky, Boeing, Northrop Grumman, Bell Helicopter, L3, SAIC, NAMSA and the U.S. Department of Defense among others.
• Sales and marketing
• Proposal preparation
• Contract administration and management for both domestic and international customers
Contact:
Address: 165 Gazza Blvd. Farmingdale, New York 11735
Phone: 631-249-2141
Mobile: 203-223-6649
Email: garyt@metadure.net www.metadure.net
Nassau Chromium Plating Co. Inc.
Nassau Chromium Plating Co. Overview
Nassau Chromium Plating Co. has established itself as a leader in the finishing industry since 1929, with over 95 years of expertise in various processes, including masking, electroplating, anodizing, painting, and non-destructive testing. As a fourth-generation, woman and familyowned business, Nassau Chrome prides itself on its commitment to quality and attention to detail.
Commitment to Quality and Excellence
Nassau Chrome’s expansive commercial network is a testament to the high standards we uphold. Our dedication to quality has earned the trust of prominent government contractors such as Boeing Aircraft, Northrop Grumman, and Sikorsky, who rely on us for their critical metal finishing needs. We are proud to support the aerospace industry and the Department of Defense, with thousands of our components playing vital roles in military tanks, landmine detection, and advanced aircraft like the F/A-18E Super Hornet and E-2D Advanced Hawkeye. We also contribute to NASA Space Shuttles and SpaceX missions, reinforcing our significant impact on space exploration.
Specialized Services
At Nassau Chrome, approximately 60% of our work is linked to the aerospace and military sectors, adhering to MIL, ASTM, and AMS processing specifications. We operate under the strict guidelines of the National Aerospace and Defense Contractors Accreditation Program (NADCAP), ensuring compliance with the highest industry standards. Certified to AC7004 & ISO 9001:2015 compliant.
Aerospace Quality System, validating our commitment to excellence in every project.
Our extensive range of services includes:
• Anodizing (Boric, Chromic, Hardcoat, Sulfuric, and Thin Sulfuric)
We prioritize meeting our customers’ deadlines while maintaining the highest quality standards, ensuring that every project is executed with precision and care.
Contact:
Nassau Chromium Plating Co. Inc.
Address: 112-122 Second Street Mineola, NY 11501
Phone: 516-746-6666
Email: Info@nassauchrome.com www.nassauchrome.com
NCP International Inc.
Address: 88 Urban Avenue Westbury, NY 11590
Phone: 516-746-6667
Email: Info@nassauchrome.com www.nassauchrome.com
About Our Company
Rapid Rivet & Fastener Corp
From Our Stock To Your Dock; Rapid Rivet Is Here for All of Your Rivet and Fastener Needs.
Rapid Rivet & Fastener Corp. is a master stocking distributor supplying precision fasteners to military, aerospace and commercial industries. Rapid Rivet was established in 1985 to serve a growing need for lot controlled, domestically manufactured rivets to multi-line hardware distributors in the United States. Since then, Rapid Rivet has become a full service, factory authorized supplier to fastener distributors and Original Equipment Manufacturers (OEM) in the United States and abroad.
Our continued growth can be attributed to consistently supplying a quality product with total attention to customer service and satisfaction. Our knowledgeable sales team is able to assist customers to find exactly what is needed for their application. As we supply all types of rivets, from solid to blind to Semi-tubular Rivets, we are able to understand the applications of our clients, and we can help provide the correct solution.
Capabilities & Qualifications
Rapid Rivet’s focus is Customer Satisfaction; In-Stock products, ready to ship the same day as ordered, with traceability and quality as an AS9100D Certified company.
• Solid Rivets
• Semi-Tubular Rivets
• Aircraft Blind Rivets
• Commercial Blind Rivets
• Rivet Nuts
• Threaded Inserts
• Drive Rivets
• Speed Fasteners
• Special Fasteners
• Rivet Tools
Rapid Rivet has been reviewed by its major aerospace customers and has gained approval by meeting or exceeding the requirements of all such Quality System inspections. Chemical and Physical test reports are available on all primary inventory items with full traceability to the manufacturer of record.
• Full Traceability
• In-Stock Inventory
• Over 70,000 Line Items
• Authorized Distributor of Allfast and AHG
• AS9100D Certified
• Same-Day Shipments
• Knowledgeable Sales Team On-Call and Ready to Assist
• Website Portal with Full E-Commerce and Order Functionality
Rapid Rivet Stands Out
Rapid Rivet & Fastener Corp. operates a Quality System in accordance with the ISO 9001:2015 and the AS9100-D standard “Quality Systems Model for Quality Assurance in accordance with aerospace requirements for Distribution and Servicing”. Rapid Rivet & Fastener Corp. recognizes its responsibility as a master distributor of fasteners and rivets to government, aerospace and commercial industries. Our quality management system aims to enhance customer satisfaction through the effective application of our system which includes processes for continued improvement of the system and its assurance of conformity to customer and applicable regulatory requirements.
Contact: Rapid Rivet & Fastener Corp
Address: 121 Toledo St, Farmingdale, NY 11735
Phone: 631-249-0400
Email: sales@rapidrivet.com www.rapidrivet.com
About Our Company
Rivkin Radler
Through six offices and 235 lawyers, Rivkin Radler is consistently Driven to Deliver® focused and effective legal services. We’re committed to our best practices, requirements that go beyond professional and ethical standards. Our work product is clear and delivered on time. As a result, our clients proceed with confidence.
We provide strong representation and build even stronger client relationships. Many clients have been placing their trust in us for more than 25 years. Our unwavering commitment to total client satisfaction is the driving force behind our firm.
We are the advisor-of-choice to successful individuals, middle-market companies and large corporations. And for clients who prefer to speak their native language, we can communicate in Albanian, French, French and Haitian Creole, Greek, Hebrew, Hindi, Italian, Korean, Polish, Portuguese, Punjabi, Spanish, Tagalog and Urdu.
Rivkin Radler’s attorneys are leaders in legal, business and political arenas. Many of our attorneys have received Martindale Hubbell’s AV Preeminent® ranking, signifying that “a lawyer’s peers rank him or her at the highest level of professional excellence.” Time and again, our attorneys are recognized as leaders by peer review programs, including Best Lawyers/U.S. News & World Report and Super Lawyers.
Our attorneys and professional staff occupy leadership roles in many organizations. We have been named among the Top 100 Private Companies on Long Island by Newsday and are consistently ranked among the New York Law Journal’s 100 Largest Law Firms in New York. The Firm is proud to have received Advancement for Commerce, Industry and Technology’s, Commitment to Excellence and Leadership Award.
Practice Areas
• Appeals
• Banking
• Bankruptcy
• Business Dissolution
• Class Actions
• Commercial Litigation
• Complex Torts & Product Liability
• Compliance, Investigations & White Collar
• Construction
• Corporate
• Critical Incident Response
• Directors & Officers Liability
• Elder Law
• Employment & Labor
• General Liability
• Health Services
• Immigration
• Insurance Coverage
• Insurance Fraud
• Intellectual Property
• Medical Malpractice Defense
• Privacy, Data & Cyber Law
• Professional Liability
• Real Estate, Zoning & Land Use
• Strategic Alternative Defense
• Tax
• Trusts & Estates
Contact: Stella Lellos, Esq.
VP Business Development
Address: 926 RXR Plaza 10th Floor, West Tower Uniondale, NY 11556
Phone: 516-357-3373
Email: stella.lellos@rivkin.com www.rivkin.com
LONG ISLAND, NY
926 RXR Plaza 10th Floor, West Tower
Uniondale, NY 11556
Phone: 516-357-3000
NEW YORK CITY
477 Madison Avenue, Suite 410
New York, NY 10022
Phone: 212-455-9555
CAPITAL REGION, NY
66 S. Pearl Street
11th Floor
Albany, NY 12207
Phone: 518-462-3000
HUDSON VALLEY, NY
2649 South Road
Suite 100
Poughkeepsie NY 12601
Phone: 845-473-8100
NEW JERSEY
25 Main Street, Suite 501
Court Plaza North
Hackensack, NJ 07601
Phone: 201-287-2460
FLORIDA
1301 Riverplace Boulevard 10th Floor
Jacksonville, FL 32207
Phone: 904-792-8925
About Our Company
Rota Industries
Rota Industries is a highly specialized build to print engineering service & milling & turning operations, serving the defense and aerospace industries. Since 2005, our commitment has been to manufacturing excellence and providing high quality parts that meet or exceed customer’s requirements and specifications.
Rota Industries manufactures high quality parts by combining a highly skilled workforce with decades of expertise and top of the line machining, inspection and engineering capabilities. Our ERP and Quality Management Systems support full-scale parts management programs with product traceability and on-time delivery.
Core Capabilities
• Machining Excellence in Milling and Turning Operations
• Specialized Aerospace and Defense Build to Print Manufacturing Services
• High Quality Driven Parts Delivery
• Customer Support Excellence, Supply Chain, and Program Management
• AS9100D Certification
• ISO 9001 Certification
• JCP Certification
• CMMC 2.0 Compliance
• ITAR Registered
• UEI: PLSMJ9W1JWM4
• Cage: 49ZN1r
NAICS - Main: 332710 336413 / 332721 / 326199
The Rota Difference
• Manufacture and operate to the high-quality level requirements of AS9100D and ISO 9001/2015 standards.
• Operate 16+ machining centers at our headquarters in Farmingdale, NY for priority scheduling and manufacturing with flexibility to bring additional highly skilled workforce or expand days/shifts for large-scale parts manufacturing program support.
• Employ highly skilled manufacturing, precision machining, programming, quality and technical engineering staff that have decades of parts specifications and requirements experience in Defense and Aerospace parts programs.
• We monitor and inspect all stages of operations and manufacturing by using ProShop ERP and Hippo QA software. These integrated systems provide real-time in-process monitoring and inspection to maintain compliance to our quality system and to effectively manage the entire business operations and activity.
• We have a full understanding of each customer’s needs, part specifications and requirements, and we offer full-scale parts program management.
• Constant investments in equipment, technology, and quality tools, as well as employing and continually training our workforce and resources to be at the forefront to provide excellence in high-quality parts manufacturing.
• Tradition founded in a commitment to supplying high-quality parts and to serve each customer’s needs by being honed in on each customer’s specifications, individual program requirements, and on-time delivery.
The Rota Quality Commitment
Tradition founded in a commitment to high-quality parts and to serve each customer’s needs through precision in each part specification, quality requirements, program management, and supply chain needs for on-time delivery.
The Rota Mission
A mission to serve customers and the market by constantly investing and providing in customer support, equipment, technology, quality tools, and employing/training highly skilled workforce and resources to be at the forefront of high-quality and manufacturing excellence.
Contact: Nicole Golemme
Business Development/Program Manager
Address: 34 Sarah Dr Farmingdale, NY 11735
Phone: 631-314-0846
Email: nicoleg@rotainc.com www.rotainc.com
Gabriel Olteanu
President
Address: 34 Sarah Dr Farmingdale, NY 11735
Phone: 631-274-1037 ext. 101 www.rotainc.com
RS Precision
About Our Company
RS Precision is your single source for small to medium size, complex, precision machined parts. A 3rd generation business, we have been satisfying our customers’ most challenging requirements for over 75 years. We can produce parts requiring multiple machining processes inhouse and work with a wide range of materials from composites to hardened steels and exotic alloys.
What Makes Us Unique
We are recognized for our meticulous attention to the smallest details and our willingness to tackle those “headache” jobs. As early adopters of EDM in the 1960’s, we create innovative machining and fixturing solutions. Our track record of quality and reliability has established longterm relationships with our customers. We have been supplying the same parts for multiple Aerospace and Defense customers since the 1970’s and 1980’s.
List of Services
• Multi-Axis CNC Milling and Turning
• CNC Milling
• CNC Turning
• Wire EDM
• Sinker EDM
• Hole Pop EDM
• Micro-Hole EDM
• Form Grinding
• Surface Grinding
• Lapping
• 40X Deburring
• Custom Fixturing
• Tolerance to +/- .0001
• Holes to .001 DIA
Certifications
• AS9100:2016
• ISO 9001 : 2015
• ITAR Registered
Industries
•
• Medical
•
Contact: Amanda Savitzky Vice President
Address: 295 Adams Blvd Farmingdale, NY 11735
Phone: 631-249-2600 x216
Mobile: 516-695-0602
Email: Sales@rsprecision.com www.rsprecision.com
Sinker EDM windows leaving .012 wide ribs in aluminum
Streamline Your Supply Chain
We deliver parts and subassemblies complete by performing and managing secondary operations, thereby eliminating your need for additional sourcing, time, and cost.
We partner with our clients, turning their ideas into reality. Building long-term relationships with our customers based on trust and ability to meet world-class-quality standards, we continue to evolve to meet the needs of tomorrow.
Engineering Development and Collaboration - Our experts provide design review, material selection, and manufacturing options.
Prototype - Prototypes are built in house to confirm fit requirements.
One Complete Source
• Engineering Development & Collaboration
• Experts in Design & Manufacturing
• CNC manufacturing
• Assembly services
• Bearing cleaning and lubrication
• Mechanical and electromechanical component options
Our wide range of CNC machining centers and equipment allows us to manufacture small to high volume orders. Many of our machines run lights out to accommodate shorter lead times.
Applications
Applications span a variety of commercial and military jets, tanks, missiles, UAVs, robots, satellites, and even the Mars Rover.
• Actuation / Positioning Systems
• Antenna Positioning
• Cargo Movers
• Door Releases
• Flight Guidance Controls
• Fuel Control
• Imaging Systems for Surveillance / Security
• Instrumentation
• Rudder Control
• Solar Wing Positioning
• Stabilization Systems
• Structural Components
• Weapons Targeting
Our Certifications
• ISO 9001 + AS9100
• ITAR Compliant-DDTC Registered
• DFARS Compliant
• RoHS & R.E.A.C.H. Compliant
• NIST SP 800-171 Compliant
Sometimes a Standard Component is Your Best Option
For design review or high-volume production, we offer a wide range of standard components online, combining the products from all the Designatronics brands into one convenient source.
• Gears, Fine to Course PitchGearheads, and Gearboxes
• Synchronous Timing Belts and Pulleys, Chain and Sprockets
• Shafting, Shaft Accessories, and Unique Components
Bearings and Linear Motion Products Pulling from a network of leading bearing manufacturers we make it easier to meet all your requirements.
Applications span a variety of commercial and military jets, tanks, missiles, UAVs, robots, satellites, and even the Mars Rover.
Contact: Simon Brazier
Director of Sales & Marketing
Address: 250 Duffy Avenue Hicksville, NY 11801
Phone: 516-302-0100
Mobile: 631-260-6703
Email: sbrazier@designatronics.com www.sdp-si.com
About Our Company
Seanair
Seanair is a AS9100D-certified, ITAR-registered, and CMMC 2.0 level-2 compliant company in Long Island, NY specializing in complex structural and precision machined parts for tactical airlift, stealth fighters, and high-altitude reconnaissance platforms.
Core Competence
With more than 60 years of experience, we have deep expertise in complex machining of landing gear, flight controls, and structural parts. We are experts in the machining of Titanium, Stainless Steel and Aluminum from bar, plate and castings. We routinely work to tolerances of 0.0002” (5.0 µm).
Our Products
Past Performance
• Long body of work includes various strategic platforms e.g. A-6, EA-6B, E-2C, C-2A, F-14, F-16, Lunar Module, C-130 B/H/J, F22, U2, JSF, SH-60 and V-22.
• Direct OEM supplier to Defense Primes; ‘Elite Supplier’ status for multiple lines.
• Supplier to Defense Logistics Agency, Defense Supply Center Columbus, Defense Supply Center Richmond, DLA Warner Robbins, and Hill AFB.
Seanair’s products are trusted by leading defense contractors and government entities, including the U.S. Department of Defense. Their core competencies include machining of Titanium, Stainless Steel, and Aluminum components, with a focus on landing gear, flight controls, and structural parts. Utilizing advanced automated test equipment, Seanair ensures 100% conformance to specifications, eliminating costly translation errors through the use of the same modeling software as their clients. With capabilities to achieve tolerances as tight as 0.0002” (5.0 µm), they excel in delivering precision machined parts for a range of strategic platforms, including the F-14, F-16, and C-130.
Vision
Respected, Requested, Required Aerospace Manufacturing Company
Values
Do What’s Right. Do What We Promise. Respect Others. Perform With Excellence
Contact: Seanair
Address: 95 Verdi Street Farmingdale, NY 11735-5555
Phone: 631-694-2820
Email: bizdev@seanair.com www.seanair.com
Sensitron Semiconductor
About Our Company
Sensitron Semiconductor is a low overhead, privately held, small business that qualifies as a non-traditional defense contractor. Registered to AS9100:2016 and ISO 9001:2015, Sensitron has set a high standard in meeting stringent quality standards.
As an Engineering driven company founded in 1969, we have solved many Mission Critical Motion Control and Power Management problems for companies such as Bell Helicopter with superior SWaP characteristics while providing an excellent value proposition to the Supply Chain Management organizations we support. Sensitron has a complete staff of engineers with specialties including electrical and mechanical design, material science expertise, packaging, and testing. From engineering design to finished product, Sensitron provides cost-effective innovative solutions to meet your power and motion control system requirements while exceeding the quality and delivery standards set forth by our customers.
Compliances & Certifications
• MIL-PRF-38534 Class E, H and K Certified
• MIL-PRF-38535 Class B Equivalent
• MIL-STD-883
• MIL-PRF-19500
• MIL-STD-750
• ANSI/NCSL Z540-1
• IPC-A-610
What Makes Us Different
Sensitron has over 50 years of heritage as a leading manufacturer of high reliability power electronic component solutions for the Defense, Aerospace, Space, and Medical markets. Our products provide rugged, light-weight, and cost effective solutions for switching power supplies, AC-DC rectification, primary & secondary power distribution, motion control, transient voltage spike protection, and custom applications.
Tens Machine Company, Inc. is a world class manufacturer of aerospace structural components and machined parts. Tens Machine is a Minority ED Women Owned Small Business. With our AS9100 certification, and continual improvement philosophy Tens Machine has maintained the highest levels of quality and service that our customers have relied on since 1974.
Some our key assets and elements are as follows:
• Highly Experienced Employees – Totaling Hundreds of Years in Aerospace manufacturing.
You Need More Than a Part...You Need a Partnership
Thuro Metal Products, Inc., based in Brentwood, New York, is a leading manufacturer of custom-machined precision component parts and assemblies. Founded in 1965 by Albert Thuro, the company combines European craftsmanship with American ingenuity to create innovative, high-quality products. Under CEO David A. Thuro, Thuro serves as a trusted partner for OEMs across critical industries, including automotive, aerospace, defense, medical, and industrial equipment.
Thuro is particularly well-known in the aircraft industry, specializing in precision fittings for fuel systems, interior and exterior lighting, and cabin systems. The company supplies mission-critical components, such as hydraulic fittings for military aircraft, to defense contractors and manufacturers. Our commitment to quality is reflected in an outstanding 99% quality score, surpassing the 95% average of our competitors.
As a certified ISO9001:2015, AS9100D, and IATF-16949 manufacturer, Thuro upholds stringent quality standards throughout its operations. Our 50,000-square-foot facility is equipped with state-of-the-art CNC turning, milling, and Swiss machining capabilities, enabling us to produce thousands of precision assemblies annually for clients like BAE Systems. Our skilled personnel in the dedicated assembly area use specialized tooling for accurate and efficient assembly operations.
Thuro’s innovative digital readout gauging system, supported by SPC software, allows operators to check complex parts directly at the machining center. We ensure a risk-free order experience, charging customers only for the parts they need. Our comprehensive supply chain solutions, including vendor-managed inventory (VMI) systems, minimize lead times and reduce costs for our partners.
Thuro Metal Products, Inc. Core Competence is an Innovator in:
• Production Machining of Custom-Machined Precision Component Parts and Assemblies
• We specialize in Exterior and Interior component parts for aircraft
• Experts in OSP outside processing
• Hydraulic Tube Fitting for Military Aircraft
CNC Multi-axis Turning Centers produce complex parts in one operation.
• CNC Swiss Automatics 12 mm - 20 mm
• CNC Mill/Turn Centers 2” - 3 1/8”
• CNC Turning 42 mm - 65 mm
• CNC Vertical & Horizontal machining Centers
• CNC OMNI Turn CT-75 series 3 Axis
• Screw Machine - Multi Spindle Automatic
With a legacy of engineering excellence and a commitment to customer satisfaction, Thuro Metal Products, Inc. is your dedicated partner in precision manufacturing, ensuring your production lines run smoothly and efficiently. Our focus on timely delivery of high-quality products keeps our customers competitive globally.
Contact: Thuro Metal Products, Inc.
Address: 50 Alkier St. Brentwood, NY 11717
Phone: 631-435-0444
Email: sales@thurometal.com www.thurometal.com
About Our Company
Transaero, Inc.
Transaero is a trusted, value-added engineering partner of aerospace, land and sea manufacturers since 1954. We proudly serve the U.S. military and global civilian aftermarket.
We are engineering liaisons through our unique capabilities and insights. We strive to increase supply chain efficiency and consistently exceed our customers’ expectations by answering the demands for responsive, operationally precise, cost-effective logistics in support of America’s Warfighters.
Our Valued Partnerships
Our strategic relationships create attractive opportunities for suppliers to get their products approved for supply to the U.S. Military and global civilian aftermarkets. From independent manufacturers and entrepreneurs to established aerospace and defense industry suppliers, the benefits of partnership are mutual. Our suppliers understand the value of forging symbiotic partnerships with companies whose strengths augment one another.
Capabilities
Engineering Opportunities for the Future
• Specialized resolution of obsolescence issues
• Experienced, in-house Engineering Team
• Suite of 70+ manufacturing partners within our comprehensive supply chain
• Decades of experience distributing and integrating fixed and rotary wing helmets
• Partners with LIFT Airborne Technologies, supplying next generation helmets
• Diversified product offerings for a wide array of applications
• Increase the availability of parts and expedite timely deliveries
• Decrease unit, administrative, and inventory costs
Trusted By
The United States Armed Forces
Department of Defense
Military and Aerospace Aftermarkets
Original Equipment Manufacturers
Service-Disabled, Veteran-Owned Small Businesses
Contact: Michael Osterloh President
Address: 35 Melville Park Road Suite 100 Melville, NY, USA 11747
Lorraine Gregory Communications is a long island-based, award-winning marketing agency with over 30 years of experience providing consulting, strategy, and campaign services. Three core functions: Creative, Video, and Print & Direct Marketing, are used—in unison or independently—to provide outcome driven solutions for clients.
Video production is facilitated by LGC Studios. On-location and in-studio production capabilities are used for pre-production, videography, and post-production services. The in-house studio has a 3500 sq. ft. film studio, green screen studio, sound room, and two editing bays. Fulltime, licensed drone pilot on staff.
Comprehensive capabilities and the team’s diverse scope of knowledge make LGC a unique resource for clients’ marketing needs.
Territory
Local, Regional, National & International Services
