REPORT OF THE TECHNOLOGICAL PROCESS
NAME:
Report: Construction of ‌.. Members of the group: Member 1, Member 2, Member 3
1
PROBLEM ANALYSIS 1.1
Approach to the problem We want to design a
1.2
Task requirements The conditions my solution must fulfil are:
2 de 9
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
2
INFORMATION GATHERING I have looked for the information in: The acceptable information I have found is:
3 de 9
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
3
DESCRIPTIVE REPORT 3.1 Sketches of the ideas all the members of the group.
MEMBER 3
MEMBER 2
MEMBER 1
The different ideas of the members of the group are:
4 de 9
Report: Construction of ‌.. Members of the group: Member 1, Member 2, Member 3
3.2
Sketch of the chosen solution.
After the brainstorming, the chosen solution is:
We have chosen this solution because:
5 de 9
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
4
PLANNING 4.1
Organization of the workshop activities
Coordinator: Secretary: Person responsible for the material: Person responsible for the tools: Person in charge of cleaning:
4.2
Materials
The materials we will need for creating the design are: ◦
4.3
Tools
The tools we will need for creating the design are: ◦
4.4
Budget
The estimated cost of the object is: AMOUNT
DENOMINATION
COST/UNIT
TOTAL
6 de 9
TOTAL COST
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
5
ACTION PLAN
The work plan we must follow is STEP NUMBER
OPERATION
AUTHOR(S)
1 2 3 4 5
7 de 9
MATERIALS AND TOOLS
APPROXIMATE TIME
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
6
EVALUATING
The final object is:
After testing and evaluating our product we can conclude that: Our problem has (hasn´t) been solved as ... Our final product is the same as the product we designed (If not, explain what changes you made and why) We followed our original planning (In case of a negative answer, explain why) Our design does (doesn´t) what it is supposed to do (If it doesn´t, explain why) We need to introduce the following changes in order to make better our prototype The materials used were (weren´t) the most appropriate for our object because The time forecasted in the work plan was similar to the time each step actually took. If it wasn´t, explain why I´m proud of my work and my partner´s work because 8 de 9
Report: Construction of ….. Members of the group: Member 1, Member 2, Member 3
I would change …...................... if I had to design and make this object all over again
The evaluation of the work of the group is summarised in this table: NAME
BRAINSTORMING AND SOLUTION
DESIGN
PLANNING
TESTING
(You can use some of this expressions: Fair, Good. Perfect, Brilliant, Disaster, Terrible, Not good at all, We can do it better)
9 de 9