MOBILE CRANES
LTM 1450-8.1 from Advanced Cranes dismantles Weir in Victoria
The maximum on eight axles.
The restricted set-up area for a crane made this job a real challenge – an LTM 1450-8.1 from Australian crane contractor Advanced Cranes and Rigging dismantled a Weir in Maffra.
A lifting capacity of 700 tonnes with either a 54 or 80 metre telescopic boom. Global mobility and convenience thanks to Hillstart Aid, ECOmode, ECOdrive, VarioBase and hydraulic VarioBallast. Nothing more is possible on eight axles. www.liebherr.com
The hoisting equipment on the 60 year old structure and its concrete bridge were replaced. The weir is on Macalister River, around 200 kilometres east of Melbourne. • Liebherr mobile crane LTM 1450-8.1 from Advanced Cranes dismantles Maffra Weir in Victoria, Australia • Advanced Cranes’ 8-axle crane was the first crane of this type in Australia Ehingen (Donau), (Germany), 7 September 2021 – “Our LTM 14508.1 was the first crane of this type delivered to Australia”, says Adam Tuddenham, Managing Director of Advanced Cranes and Rigging. The 8-axle crane has been part of
Advanced Cranes’ fleet since 2020. “Today it is still the only crane of this type in the State of Victoria and is delivering reliable, valuable services for us.” The Liebherr 450tonne crane can be described as a large fast-erecting crane as it combines particularly good mobility with short set-up times on site. At the same time, it delivers incredible capacity with its long, powerful telescopic boom.
to be positioned so that it could complete the hoisting process over the side whilst remaining within the required working radius. The steep slope, uneven terrain and an underground water tunnel made the search for a suitable crane position even harder. By using additional crane mats, the Advanced Cranes team finally managed to level the LTM 1450-8.1 adequately.
Restricted set-up area for the large crane For the job in Maffra, the constricted area for the crane position and the set-up work posed something of a challenge to the team – the LTM 1450-8.1 had
Advanced Cranes set up the LTM 1450-8.1 with a 28 metre luffing lattice jib and total ballast of 134 tonnes for this job. VarioBallast® is one of the special features of the Liebherr crane. The ballast radius can be infinitely varied using a simple hydraulic slewing mechanism. At maximum radius, the lifting capacity is also at its maximum. The radius can be reduced in constricted conditions.
The LTM 1650-8.1
Mobile and crawler cranes
Two core holes had been drilled into the 60 year old bridge before the crane started work. The attachment chains were threaded through these and connected using a 9 metre spreader bar. Ultimately the Advanced Cranes team and their LTM 1450-8.1 completed the hoisting work without any problems. They dismantled the existing gate lifting equipment for the weir and the reinforced concrete bridge. The heaviest load for the 8-axle crane was 32 tonnes plus 4 tonnes for rigging and hook at a 34-metre radius and a maximum hook height of 20 metres.
Liebherr Africa, +27 (0) 11 365 2000, info.laf@liebherr.com, www.liebherr.com
Liebherr-Africa (Pty.) Limited Vlakfontein Road, Springs 1560 Phone: +27 11 365 2000 E-mail: info.laf@liebherr.com www.facebook.com/LiebherrConstruction www.liebherr.com
OFFSHORE LIFTING
Safe and cost-effective flare tip replacement on offshore platforms Flare systems are an integral part of the safety systems on oil and gas-producing assets. They facilitate the controlled disposal of hydrocarbon-containing material. Due to operational wear and tear, the flare tips (typically weighing 1 to 4 tons) of four fixed platforms were scheduled to be replaced in two shutdown campaigns. The client had contracted Axess Group to replace the flare tips consecutively, within a short time frame. It was important for the replacements to be completed as soon as possible since a longer shutdown period would mean a more significant loss in revenue for the client. As flare tips are located at a height, above deck or sea, and out of reach of the assets’ deck cranes, flare tip replacements are complex operations that need to be wellplanned to ensure safety and reliability. Solution As the production shutdown window was narrow, we decided on the helicopter method together with the client. “At Axess, we have extensive experience in both
helicopter and mechanical methods for replacement of flare tips. We understand that every project can have its constraints, thus, we always make sure to thoroughly assess the situation and advise on a solution that best suits our client,” said Bjørnar Bøe Lundberg, Team Leader at Axess Group. Typically, before such a project execution, Axess will mobilise an experienced Field Engineer to conduct a site survey to assess the details of the site. However, an alternative measure was required due to the COVID-19 pandemic. Instead of a site survey, Axess guided the client’s offshore personnel to collect the required data as part of an extensive desktop study.
the laydown area of the helideck. Finally, the new flare tip was picked up from the platform laydown area and transferred to the flare tip platform for installation. Results Due to excellent preparation, communication and teamwork, the team successfully replaced all four flare tips safely, within time and budget. “Our global network of engineering experts enables us to provide a wide range of quality services to offshore assets located anywhere in the world. We are delighted to have helped another client with flare tip replacements,” Bjørnar added.
The replacement process on each of the four platforms was the same. The team first rigged and prepared the old and new flare tips for lifting.
The client’s Campaign & Shutdown Lead said: “Another flare tip replacement completed during this pandemic with all the constraints that we are familiar with. Thanks to the team for the excellent work done.”
Subsequently, they used a helicopter to lift the old flare tip from the riser and positioned it on
Axess Group, axessafrica@axessgroup.com, www.axessgroup.com