DOM A PEN DANT
2 1 2 . 6 2 5 .9 6 0 5
INSTAL L INST R UC T ION S
ST U D I O @ L AV IVAHOM E.C OM
FI X ED LENGTH
PAGE 1 OF 2
DATE 10.13.22
5"
PLEASE NOTE All of our lighting is carefully inspected and electrically tested prior to shipping. Once received, we ask that you please inspect thoroughly—prior to installation—for any physical
CANOPY MATERIAL: BRASS TEXTURE: RADIAL GRAINED FINISH: SATIN CLEAR COAT 18 1/2" VARIES WITH OAD
1/2"
defects which may have occurred during shipping. Lighting that has been installed is not eligible for return or exchange, and L’Aviva Home does not take any
OUNTING: responsibility for any RECT TO 4" J-BOX R MUD RING installation itself.
damage incurred during 2-1/2"
Please be sure, too, to note the maximum recommended
TURE WEIGHT (EST.): bs. VARIES DEPENDING wattage N OVERALL DROP
STEM ASSEMBLY MATERIAL: BRASS TEXTURE: RADIAL GRAINED FINISH: SATIN CLEAR COAT
40" OAD
for your fixture when choosing a bulb; using higher
wattage bulbs can short the wiring, and L’Aviva Home does
9-1/2" VARIES WITH OAD
not take responsibility for any damage incurred under these
PPLY VOLTAGE: circumstances. 0 VAC
CAREFULLY REMOVE FIXTURE FROM PACKING MATERIALS
TURE CIRCUITS:
DOMA DIFFUSER MATERIAL: LEATHER COLOR: AS SPECIFIED
TURE CONDUCTORS: SPT-1 #18-2 CLEAR SILVER TINNED GROUND
LB TYPE: 8-9W LED, E26, G25, CLEAR W EQUIVALENT
CONTENTS
12"
FRONT VIEW
TING: Dry Location
•
Leather Shade and Fixture Assembly
•
Universal Cross Bar
•
8-32 Cross Bar Screws (2x)
•
Wire Nuts (2x)
•
Canopy with Screw Collar
•
Upper Stem Assembly with Hang Straight
•
Lower Stem Assembly
•
Brass Connector Ring
•
E26 Bulb, G25 LED
INSTALLATION BULB TYPE: LED, E26 BASE, G25 CLEAR1. This
SIDE VIEW
product must be installed in accordance with applicable
installation code by a person familiar with the construction and operation of the product and the hazards involved. 2. Turn off power to junction box before installing.
BOTTOM VIEW
3.Thread 1/8 IPS x 1-1/4" Nipple (1 provided) in to top end of Hang 15"
Straight, then thread Hang Straight on to Upper Stem Assembly. Unthread Screw Collar and slide down Upper Stem to rest on chain loop. 4. Slip Canopy over Hang Straight and down Upper Stem to rest on screw collar. (take care to not scratch stem).
DOMA PEN DANT
2 1 2 . 6 2 5 .9 6 0 5
INSTAL L IN ST R UCT IONS
ST U D I O @ L AV IVAHOM E.C OM
DATE 10.13.22
PAGE 2 OF 2
FI X ED LENGTH
| DOMA INSTALL INSTRUCTIONS
5. Thread Bar onto Hang Straight and secure with Lock All of our lightingBracket is carefully inspected and electrically tested prior toWasher shipping. Once recieved, we ask that you please inspect and Nut. horoughly - prior to installation - for any physical defects which may have occurred during shipping. Lighting that has been nstalled not Upper eligible for return or exchange, 6. is Raise Stem Assembly, with canopy,and and l'aviva secure home Bracket does not take any responsibility for damage incurred during Bar to junction box with (2 provided) 8-32 screws. nstallation itself.
lease be sure, too, to note the maximum recommended 7. Feed fixture wireswhen (clear choosing silver SPT-1aand tinned ground) from wattage for your fixture bulb: Using higher wattage bulbs can short wiring and damage fixture materials or Electrical Assembly up through Lower Stem Assembly. nishes. L'aviva home does not take responsibility for any damage incurred under these circumstances. 8. Thread Lower Stem Assembly into coupling on Electrical
CAUTION: Turn off power to junction boxc before installing.
Assembly (avoid twisting wires). Secure with Set Screw (in coupling)
8-32 SCREWS (TO 'J' BOX)
1/8 IP NUT LOCK WASHER BRACKET BAR (HIDDEN) CANOPY HANG STRAIGHT WITH SCREW COLLAR UPPER STEM ASSEMBLY (LONGER SECTION)
Carefully remove parts from packaging. As with all metal lighting, nstallation with faric 9. Connect Ringgloves to loop isonrequired. Upper Stem Assembly.
his product must be installed in accordance with the applicable nstallation code by a Body person with the construction and 10. Raise Fixture withfamiliar Lower Stem Assembly and connect peration of the product and the hazards involved. loop to Ring.
NSTALLATION:
11.1/8 Orient section of (1 Ring as shownininto image of wire Thread IPS hinged x 1-1/4" Nipple provided) top end of Hang Straight, then passing by ring.thread Hang Straight on to Upper Stem Assembly. Unthread Screw Collar and slide down Upper Stem to est on chain loop. Slip Canopy Hang Upper StemoftoWire rest 12. Feedover fixture wiresStraight past theand Ringdown as shown in Image n screw collar. (take care to not scratch stem). Passing by Ring. Thread Bracket Bar onto Hang Straight and secure with Lock Washer and Nut. Raise Upper Stem Assembly, with canopy, and secure Bracket 13. Feed fixture wires through Upper Stem Assembly. Pull ar to junction box with (2up provided) 8-32 screws.
RING WITH HINGED OPENING
LOWER STEM ASSEMBLY (SHORTER SECTION)
excess down around Bracket Bar.
Feed fixture wires (clear silver SPT-1 and tinned ground) from lectrical Assembly up through Lower Stem Assembly. Thread Stem into(3coupling Electrical 14.Lower Perform wireAssembly makeup using provided)on Wire Nuts - ensuring Assembly (avoid twisting wires). Secure with Set Screw (in proper polarity, (Ribbed wire of SPT is neutral) oupling)
Connect Ring to loop on Upper Stem Assembly. RaiseBody Canopy and secure in place with Screw Raise15. Fixture with Lower Stem Assembly and Collar. connect oop to Ring. Orient hinged section of Ring as shown in image of wire passing y ring.16. Install (3 provided) 8-9 watt, E26, LED Bulbs. (60 watt
BALL COUPLING FIXTURE BODY (LEATHER)
incandescent equivalent) Then supply power to the fixture.
Feed fixture wires past the Ring as shown in Image of Wire assing by Ring. Feed fixture wires up through Upper Stem Assembly. Pull excess down around Bracket Bar.
Perform wire makeup using (3 provided) Wire Nuts - ensuring proper polarity, (Ribbed wire of SPT is neutral) Recess wire connections within junction box.
Raise Canopy and secure in place with Screw Collar. Install (3 provided) 8-9 watt, E26, LED bulbs. (60 watt ncandescent equivalent) Then supply power to the fixture.
DATE: 06/17/2022
PAGE 1 OF 1