PIEDR A S CON CE + SEMI- F L USH
2 1 2 . 6 2 5 .9 6 0 5
INSTA L L IN ST R UCT IONS
ST U D I O @ L AV IVAHOM E.C OM
WALL OR CEI LI NG MOUNTED
DATE 10.13.22
Universal Crossbar Mounting Bracket
PAGE 1 OF 2
8-32 Screw (short) Screw Cap
8-32 Screw (long)
PLEASE NOTE
CONTENTS
All of our lighting is carefully inspected and electrically tested
•
Stone Fixture Body Electrical Assembly
•
Universal Cross Bar / Mounting Bracket
•
8-32 Long Cross Bar Screws (2x)
•
8-32 Short Cross Bar Screws (2x)
•
Screw Caps (2x)
•
Wire Nuts (2x)
•
E26 Bulb, Tala Porcelain II LED
prior to shipping. Once received, we ask that you please inspect thoroughly—prior to installation—for any physical defects which may have occurred during shipping. Lighting that has been installed is not eligible for return or exchange, and L’Aviva Home does not take any responsibility for any damage incurred during installation itself.
Please be sure, too, to note the maximum recommended wattage for your fixture when choosing a bulb; using higher wattage bulbs can short the wiring, and L’Aviva Home does not take responsibility for any damage incurred under these circumstances.
CAREFULLY REMOVE FIXTURE FROM PACKING MATERIALS
PIEDR A SCON CE + SEMI- F L USH
2 1 2 . 6 2 5 .9 6 0 5
INSTA L L INST R UC T ION S
ST U D I O @ L AV IVAHOM E.C OM
PIEDRA |
DATE 10.13.22
WALL OR CEI LI NG MOUNTED
SCONCE + FLUSH-MOUNT PAGE 2 OF 2
INSTALLATION 1. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. 2. Turn off power to junction box before installing. 3. This fixture is fully assembled: remove the assembly stone body from the backplate by loosening the two screw caps at either side of the fixture.
PIEDRA |
SCONCE + FLUSH-MOUNT
4. Attach the mounting bracket using the 8-32 x 1-1/2" set screws (2x provided) into a 3/O mud ring or j-box.
5. Hold the stone assembly next to the j-box and make appropriate wire connections with house supply wires, and
01
secure with wire nuts provided. Ground fixture with ground wire
Side
provided. 6. Align the circular opening on the stone backplate with the threaded 8-32 screws (2x provided) on the mounting bracket. Push the Backplate over the Threaded screws until the Backplate is flush with the wall, then secure with the screw caps provided (2x provided). IMPORTANT: Do not tighten screw caps with any tool or machine, only use your fingers to lightly secure the screw caps to back plate. 7. Lamp fixture with provided E26 Bulb, LED. Dim with trailing edge dimmer.
COLLECTION SPECS DIMENSIONS
LAMPING
10” Ø x 5” H 25.5 cm Ø x 13 cm H
Wall or ceiling m Junction box; ne
BACK PLATE
WEIGHT
Tala, Porcelian I 540 lumen outpu 6W | 60W replac 90 lumens/watt 2700K / CRI 95
~ 9 lbs / 4 kg
Recommended
6” Ø x .5” H 15 cm Ø x 1.5 cm H
Lutron - Diva DV *X denotes face
COLLECTION SPECS