nsf supermarket
High quality Stainless Steel compartment sinks: Versatility, Convenience and durability Plus- Highly polished for a smooth clean appearance.
21/8” 8”
42” 37” Center of faucet holes
371/8” 34”
M&E Mfg Co. Inc., 914-331-2110
Our CO series Stainless Steel sinks start with high quality 304 series Stainless Steel for durability. The tops and bowls are made of 16 Ga. Stainless Steel, fully fabricated using die forming, creating a 3/4” radius on all inside corners. The bowl bottom is also die formed, to ensure complete bowl drainage. The integral backsplash has an 8” overall height, with a 2” return 8” at 45 degrees. There is a 1 5/8” rolled rim on the sides and front that is. integral to the top and is fully coved. All of these sinks come standard with an 11” bowl depth that reduces the “reach” needed to get small items from the bottom of the bowl. Other bowl depths are, of course, available upon request. The Stainless Steel legs come with adjustable bullet feet a 33” to 34” height to the top of the bowl. Exposed surfaces are highly polished for a look that is easy to clean. Sinks with 2 or more compartments come with a 1 piece Stainless Steel front skirt that covers the front of the bowls and completes the smooth, clean appearance of these units. One compartment sinks with 24” or longer drainboards are supplied with an additional set of legs with bracing under the drainboard. Sinks with more than one compartment receive an extra set of legs, with bracing, when the drain-
Fax: 914-331-4143
Subject to change without notice
3
a
8