SEASON: CATEGORY:
PC5:
STYLE NAME: FIT BLOCK:
BODY FABRIC:
THREAD 1:
THREAD 2:
ZIPPER 1:
ZIPPER 2:
MAIN LABEL:
EXT. LABEL:
POCKET BAG:
SLEEVE LINING:
BODY LINING:
CORD: ZIP PULL:
TENNIS MENS’ TOPS A7145
TENNIS ANORAK A1176 FULL ZIP PARKA
CRINKLE NYLON
BODY- TEX SIZE - VENDOR TO ADVISE THREAD DTM LABELS/INTERNALS- 40 TEX THREAD DTM
TENNIS N/A
TOP LAYER MESH. BOTTOM LAYER LINING LINING FABRIC MESH
3 3/4” MARGIN
SNTS 1/8” MARGIN
1/2” SINGLE WELT
ES
SELF FABRIC PIPING OVER 1/4” CORDING
5/16” TS
ADD INTERIOR HIDDEN WELT SNAPS
1” SN TS TURNBACK HEM
1” MARGIN
3” COLLAR
2” GROSGRAIN TAPE
SNTS 1/8” MARGIN
2” CLEAN FINISH
7” x 1” SINGLE WELT POCKET ES
SEE INTERIOR VIEW FOR DRAWCORD BUNGEE DETAILS
1/4” SN FELLED SEAM SINGLE LAYER HOOD 5/8” MARGIN
2 1/2” BOX STITCH ATTACHED TO BOTTOM PRIMARY FABRIC
SLEEVES FULLY LINED LINING FABRIC
SLEEVES FULLY LINED LINING FABRIC
SELF FABRIC FACING
MESH FABRIC HALF LINED - ATTACHED TO BOTTOM PRIMARY FABRIC
DRAWCORD BUNGEE, DISTANCE BETWEEN EYELETS (EMBROIDERED EYELET) = 1 1/2”
SELF FABRIC LINING
TAPE TO HOLD BUNGEE CORD
SEASON: S2-24
CATEGORY: WOVEN TOPS
PC: A8824
STYLE NAME: T3 BLAZER
FIT BLOCK: A6924 CASUAL BLAZER
NON-FUNCTIONAL SLEEVE
VENT +
NON-FUNCTIONAL BUTTON CLOSURE
CUFF
KISSING BUTTONS
1 1/2”
COLLAR STAND SEAM + D/N TS 1/16” MARGIN 1/8” GAUGE
UNDERCOLLAR BIAS CUT
UNDERCOLLAR RECESSED 1/8”
SOFTENED CORNERS AT LAPEL
COLLAR: SNES SEE LABEL PLACEMENT PAGE FUNCTIONAL
FALLBACK SHOULDER W/ CLEAN FINISH SNES AT COLLAR FUNCTIONAL VENT
SLEEVE
SEAM DOWN CENTER
5 1/2” 3/8” FULLY LINED SLEEVES
INTERIOR PKT W/ BUTTON
POCKET BAG STITCHED TO FACING STAY STITCH
1/4” BINDING, AT INTERIOR SIDE SEAM PUSHED TOWARDS CB TURNBACK W/ SNES
5 1/2” Self fabric
WELT POCKET IS 3/8” HIGH W/ S/N ES + BARTACK @ ENDS
1/4” SNDL AT FACING
1/4” BINDING, AT INTERIOR SIDE SEAM PUSHED TOWARDS CB
1/4” BINDING, CB SEAM ALLOWANCE BUSTED OPEN
Cape/ Binding (pocketing quality)
TAILOR TACK CORNERS OF MAIN LABEL
TAILOR TACK ENDS OF FIT LABEL SNES ATTRIBUTE LABEL TO MAIN LABEL
SEASON: S2-24
CATEGORY: WOVEN TOPS
PC: XXXXX
STYLE NAME: MADE IN USA SHIRT
FIT BLOCK: A8392 RELAXED BLOCK
PROTO SIZE: REQUEST EXTRA SMALL, SMALL, AND MEDIUM
EDGESTITCH
1/16” SN
EDGESTITCH
1/4” SNTS
1/4”
1/4” SNTS AT HEM
1/4” SN FELLED SEAM
EDGESTITCH
1/4” SNTS AT HEM
REF SLEEVE PLACKET DETAIL PAGE
KNIFE PLEATS FOLLOW A8392
SLEEVE PLACKET W/BUTTON & CUFF
SLEEVE PLACKET & CUFF: POSITION, DIRECTION & SEW
PLACKET BUTTON POSITION:
CENTERED ON UNDERPLACKET OPENING-
VERTICAL SEW WITH STRADDLE STITCH
PLACKET BUTTON HOLE POSITION:
CENTERED ON PLACKET OPENING-
VERTICAL SEW
CUFF BUTTON POSITION:
CENTERED & 1/2” FROM EDGE
VERTICAL SEW WITH STRADDLE STITCH
CUFF BUTTON HOLE POSITION:
CENTERED & 1/2” FROM EDGE
HORIZONTAL SEW
BUTTON CENTERED ON PLACKET OPENING
SLEEVE PLACKET VIEW
3/4”
7/8”
1/16 SNES CLEAN FINISH
PLACKET LABEL PLACEMENT
CENTER ON TOP OF WEARER’S RIGHT UNDERPLACKET.
PLACEMENT IS CENTER FROM BOTTOM EDGE OF LAST BUTTON AND HEM. SNES 4-SIDE
SECURE W/OVERLAPPING STITCH ON BOTTOM
CENTER OF LABEL
CF TOP PLACKET: CLEAN FINISH: SN
CF UNDER PLACKET: CLEAN FINISH: SN
MAIN LABEL SEWN
10 MM BELOW SEAM, CENTERED ON GARMENT
2 SIDE SEW
FIT LABEL SEWN
7 MM BELOW SEAM, CENTERED ON GARMENT
2 SIDE SEW
FLAG LABEL SEWN INTO FIT LABEL
TEX 20, 12 SPI AT POCKET
TEX 20, 12 SPI AT CF PLACKET
TEX 20, 12 SPI AT COLLAR STAND
TEX 30, 8-10 SPI AT ARMHOLE AND BACK YOKE
TEX 30, 8-10SPI AT CUFF
= SELF FABRIC
= LINING FABRIC
= TRICOT FUSIBLE INTERFACING
SHOULDER SEAM:
CLEAN FINISH
FRONT SHOULDER YOKE:
JOIN ON INSIDE; 1/4” SINGLE NEEDLE TOPSTITCH ABOVE SEAM
POCKET CONSTRUCTION:
SEE DETAIL PAGE
SIDE SEAMS: 5-THREAD OVERLOCK ON INSIDE
1 7/8” FOLDED WAISTBAND:
BOTH SIDES ARE FUSED WITH FUSING; 1/4” SINGLE NEEDLE TOPSTITCH ON TOP & BOTTOM OF WAISTBAND
CF OPENING:
CLEAN FINISH WITH ZIPPER AND SELF FACING; FACING IS FUSED WITH TRICOT INTERFACING; 1/4” SINGLE NEEDLE TOPSTITCH AROUND CF -#5 ZIPPER
ATTACH TO BODY; CLEAN FINISH WITH CF FACING
▪ EXPOSED ZIPPER 3/8”
ARMHOLES:
JOIN SLEEVES TO BODY ON INSIDE; CLEAN FINISH
COLLAR [2 PIECES]:
FUSE TOP COLLAR WITH TRICOT INTERFACING; CLEAN FINISH TOP COLLAR TO UNDER-COLLAR 1/4” SINGLE NEEDLE TOPSTITCH AROUND; 1/4” JOIN STITCH TO JOIN COLLAR TO FUSED COLLAR STAND [2 PIECES]; DOUBLE NEEDLE TOP STITCH TO FLATEN THE SEAM
1 3/4” FOLDED SLEEVE CUFF BAND:
BOTH SIDES ARE FUSED WITH FUSING; 1/16” SINGLE NEEDLE TOPSTITCH ON TOP & 1/4” SINGLE NEEDLE TOPSTITCH BOTTOM OF CUFFS
BACK SLEEVE SEAM 1/4” SINGLE NEEDLE TOPSTITCH ABOVE SEAM
UNDERARM SEAM CLEAN FINISH AND OVERLOCK
SLEEVE OPENING: 3” OPENING ABOVE CUFF SEAM
CLEAN FINISH COLLAR STAND TO BODY; SINGLE NEEDLE EDGESTITCH ABOVE NECK SEAM BETWEEN SHOULDER SEAMS (STRADDLE)
E E
A A A A A
FORWARD SHOULDER SEAM
* NO T.S.
2” BASEBALL COLLAR IN RIB
* 1/4” SNTS
1/4” SNTS SIDES & BOTTOM EDGES
ARMHOLES 1/4” DNTS
SINGLE WELT POCKET
* 15MM HIDDEN METAL SNAPS @ CENTER
* 1/4” DNTS @ OPENING EDGE OF WELT
* EDGE STITCH ALL AROUND
* 3/8” BAR TACKED ENTRY ENDS
‘BR’ EMBROIDERY
CENTERED ON WEARER’S LEFT CUFF
* 1” ABOVE CUFF SEAM
EXPOSED ZIPPER FRONT
*#5 VISLON
*1/4” SNTS CONTINUED TO FLAT PANELS
*BRANDED ‘BR’ ZIPPER PULL
2 1/2” RIB CUFFS & WAISTBAND
* 1/4” DNS
2 1/2”
1 1/4” STORM PLACKET IN SHELL
* 1/4“ SNTS
* 3” ZIG-ZAG STITCH
1 1/2”
1/4” X 2 1/4” SELF MITERED LOOP IN SHELL AT CB NECK W/ EDGE STITCH
SHELL LINING FUSED SELF + FILL
SHELL FACING
* EDGE STITCHED
* LIGHT POLY FILL
* LOOSE HANGING / NO QUILT
PATCH POCKET IN SHELL
* EDGE STITCH W/ TRIANGLE STITCH
* 3/4” HEM CLEAN FINISHED TO EDGE
* AT ARM PIT LEVEL
* 3/4” IN FROM FACING EDGE
‘BR’ EMBROIDERY
CENTERED ON WEARER’S LEFT CUFF * 1” ABOVE CUFF SEAM
SHOULDER FORWARD * NO T.S.
3/8” NECK TAPE IN SELF AT INSIDE BACK NECK. STOP NECKTAPE 1/4” AWAY FROM SHOULDER SEAMS
*EDGE CHAIN STITCH @ TOP & BOTTOM
1/4” CLEAR ELASTIN IN SHOULDER SEAMS
JOINING OF THE NECK SEAM *1” AWAY FROM THE SEAM
SIDE VENTS W/ 3/8” LYCRA TAPE FACING W/ 1/4” DBL NEEDLE TOPSTITCH W/ CONTRAST BARTACK AT TOP EDGE OF VENT
3/4” TURNBACK HEM W/1/8” DOUBLE NEEDLE COVERSTITCH
5/8” BINDING IN SELF * 1/8” DOUBLE NEEDLE STITCH
1” TURNBACK HEM W/1/8” DOUBLE NEEDLE COVERSTITCH
1/8” GROSGRAIN TAPE
1/4” EXPOSED
1/8” GROSGRAIN TAPE
ELASTIC TAPE IS FUSED TO OUTER FRONT WAISTBAND ONLY
= SELF
ON-SEAM ZIPPERED POCKET
* INVISIBLE ZIPPER WITH TEAR DROP PULL
* 3/8” BAR TACKED ENDS
* 1 1/2” POCKET FACING IN SELF
SLANT POCKETS (NO T.S.)
* 3/8” BAR TACKED ENDS
* 1” POCKET FACING IN SELF; CLEAN FINISHED W/ EDGE STITCH
*1 1/2” ELASTIC TAPE FUSED ON OUTER WAISTBAND OF FRONTS ONLY
*1/8” SNS ON INSIDE WAISTBAND AT TOP AND BOTTOM
*JOIN SEAM IS DITCH STITCHED
POCKET BAG
* FRENCH SEAMED W/ 1/4” SNS
1X 28L BUTTON # 4.5 ZIPPER FASTENER
DROP IN SINGLE WELT POCKET
BELT LOOP (NO T.S.)
BARTACK AT TOP ENDS LOWER BAR TACK ONLY VISIBLE FROM INSIDE SHAPING DARTS
* 1/2” BAR TACKED ENDS
* 2” FACING IN SELF
POCKET BAG
BACK WAISTBAND ELASTIC TAPE IS RELEASED AND CAUGHT ONLY ON OUTSEAM T.S. FOR ADJUSTABLITY 1/2”
* FRENCH SEAMED W/ 1/4” SNS
BASTE STITCH BACK POCKET
*LEAVE 1” OPEN ON BOTH ENDS
*5SPI
SINGLE NEEDLE J STITCH
* 3/8” BAR TACK
1 1/4” INTERNAL HEM
**BLIND STITCHED FOR CLEAN LOOK**
JOIN BOTTOM BELT LOOP INTO WB SEAM
BR EMBROIDERY
*1/2” ABOVE BACK EDGE OF WELT
ZIPPERED SINGLE WELT POCKET ON WEARER’S RIGHT
* 1/2” BAR TACKED ENDS
* 2” FACING IN SELF CLEAN FINISHED POCKET BAG
* FRENCH SEAMED W/ 1/4” SNS
5-THREAD OVERLOCKED BACK & LOWER FRONT RISE
INTERIOR 3/8” BARTACK PLACEMENT
EXTERIOR 3/8” BARTACK PLACEMENT
3/8” INTERNAL BARTACK ON INTERNAL FLY WITH INTERNAL FLY EXTENSION
2” FOLDED WIDE WAISTBAND
1 7/8” ENCASED ELASTIC; JOINS TO BODY WITH 4-THREAD OVERLOCK SEE DETAILS PAGE
7 1/4” SLANTED HAND POCKET PATCH TOP OF PCKT OPENING 1 1/2“ AWAY FROM SIDESEAM; W/ 1/4” BTCKS @ 1/8” BELOW WB SEAM; AND BTM EDGE OF PCKT OPENING; TURNBACK POCKET OPENING WITH 1/4” SNTS; POCKET PATCHES JOIN TO BODY AND CLEAN FINISH WITH 1/4” DNTS SEE DETAILS PAGE
OUTSEAM:
PLAIN JOIN ON INSIDE; CLOSE SEAM ALLOWANCES WITH 4-THREAD OVERLOCK; SNES SEAMS TOWARD THE BACK
INSEAM:
PLAIN JOIN ON INSIDE; CLOSE SEAM ALLOWANCES WITH 4-THREAD OVERLOCK
WAISTBAND JOINING SEAM JOINS ON THE INSIDE
BARTACKS: 1/8” BELOW WAIST
WAISTBAND
2 SNTS TO SECURE ENCASED ELASTIC WAISTBAND; JOINS TO BODY WITH 4-THREAD OVERLOCK SEE DETAILS PAGE
CF AND CB PLAIN JOIN ON INSIDE; CLOSE SEAM ALLOWANCES WITH 4-THREAD OVERLOCK
FRONT PATCHES SEAMS: PLAIN JOIN ON INSIDE; CLOSE SEAM ALLOWANCES WITH 4-THREAD OVERLOCK; 1/4” DNES SEAMS TOWARD CETNER BACK SEAMS: PLAIN JOIN ON INSIDE; CLOSE SEAM ALLOWANCES WITH 4-THREAD OVERLOCK; 1/4” DNES SEAMS TOWARD OUTSIDE
1 1/4” TURNBACK PANT HEM W/ 1/4” COVER STITCH
DECREASE LINES AT TOE
TOE SEAM: JOIN ON INSIDE WITH MACHINE LINKING
FOLDED HEAL TAB: USE ELASTIC THREAD 1/2” SEAMLESS CUFF INSTEP ON TOP OF FOOT
LOGO HEAT SEAL: *ONLY ON LEFT SOCK* SILICONE GRIPS: 4 ROWS OF SILICONE AT INSIDE HEEL
FRONTS: MATCHED
SIDE SEAMS: NOT MATCHED
BACKS: MATCHED
A A A A
INSEAMS: NOT MATCHED
FRONTS: MATCHED (BALANCED AND PLAIDS HORIZONTALLY)
BACKS: MATCHED (BALANCED AND PLAIDS HORIZONTALLY)
SIDES SEAMS: NOT MATCHED
INSEAMS: NOT MATCHED
FUNCTIONAL FLY: SNTS ON CF WAISTBAND
FOLD OVER W/ SNTS W/ 3/8” BARTACKS (SEE DETAIL PAGE)
SIDE SEAM: FLAT FELLED SEAM W/ 1/4” DN CHAINSTITCH
WAISTBAND: FOLD OVER W/ CLEAN FINISH 1 1/2” ENCASED ELASTIC FINISH W/ CHAIN STITCH ON TOP/BOTTOM *3/16” CHAIN STITCH TOP EDGE *1 1/4” FROM TOP CHAIN STITCH
BACK WAISTBAND: FLATTEN CB WAIST W/ SNTS FOR HEATSEAL PLACEMENT ON INTERIOR WAISTBAND 1 1/2” 1 3/4” 3/16” 1 1/4”
HEM: 5/8” TURNBACK CLEAN FINISH W/ SNTS
SIDE VENTS W/ 3/8” BARTACK AT TOP EDGE OF VENT
INSEAM: FLAT FELLED SEAM W/ 1/4” DN CHAINSTITCH
FRONT RISE SEAM: CLEAN FINISH W/ 1/4” DNTS
BACK RISE SEAM: FLAT FELLED SEAM W/ 1/4” DN CHAINSTITCH
RIB MUST ALWAYS BE @ CENTER OF PLACKET
1X1 RIB KNIT COLLAR SEAMLESS KNIT INTO COLLARSTAND
SHOULDER SEAMS LINKED ON INSIDE
COLLAR JOIN SEAM LINKED ON INSIDE
PLACKET ALL NEEDLE RIB TRIM
ARMHOLE SEAMS LINKED ON INSIDE
BUTTON 20L BUTTONS
FRONT&BACK BODY SEE STANDARD FOR TEXTURE KNIT
1 X 1 RIB CUFF
SEAMLESS CUFF
INVISIBLE BIND-OFF HEM W/ ELASTIC THREAD FINISHING
SLEEVE UNDERARM SEAMS LINKED ON INSIDE
SIDE SEAMS LINKED ON INSIDE
1X2 RIB HEM
SEAMLESS HEM
INVISIBLE BIND-OFF HEM W/ ELASTIC THREAD FINISHING
1 ROW ELASTIC THREAD RIB FINISHING AT SLEEVE CUFF HEM & BODY HEM
(INSIDE HEM/CUFF)
MAIN LABEL
SEWN BELOW CENTER BACK NECK SEAM
S.N.T.S.
COO LABEL
CENTERED SEWN BELOW MAIN LABEL
HANG TAG/LOOP LOCK
LOOPED THROUGH COO LABEL ATTACHING HANGTAGS
2” AWAY FROM FOLDED EDGE CENTERED ON FOLD
CARE LABEL + SATIN LABEL (BEHIND)
3” UP FROM HEM ON WEARERS LEFT
SPARE BUTTONS APPLIED ONTO BLANK SATIN LABEL BEHIND CARE LABEL
SIDE VIEW
SIDE SEAMS
MATCH STRIPES ON SIDE SEAMS
ARMHOLE SEAMS
MATCH STRIPES ON ARMHOLE
SEE ARTWORK PAGE FOR MEASUREMENTS
1X1 RIB KNIT COLLAR SEAMLESS KNIT
SHOULDER SEAMS LINKED ON INSIDE
COLLAR JOIN SEAM JOIN NECK COLLAR 1/4” TUBULAR BASE
ARMHOLE SEAMS LINKED ON INSIDE
BUTTON 20L BUTTONS
FRONT&BACK BODY SEE STANDARD FOR TEXTURE KNIT
SLEEVE UNDERARM SEAMS LINKED ON INSIDE
SIDE SEAMS LINKED ON INSIDE
STRIPES MATCH AT ARMHOLE
1 X 1 RIB CUFF
SEAMLESS CUFF
INVISIBLE BIND-OFF HEM W/ ELASTIC THREAD FINISHINGh
1X1 RIB HEM
SEAMLESS HEM
INVISIBLE BIND-OFF HEM W/ ELASTIC THREAD FINISHING
1 ROW ELASTIC THREAD RIB FINISHING AT SLEEVE CUFF HEM & BODY HEM
(INSIDE HEM/CUFF)
MAIN LABEL
SEWN BELOW CENTER BACK NECK SEAM
S.N.T.S.
COO LABEL CENTERED SEWN BELOW MAIN LABEL
HANG TAG/LOOP LOCK
LOOPED THROUGH FIRST BUTTONHOLE ATTACHING HANG TAG
2” AWAY FROM FOLDED EDGE CENTERED ON FOLD
1 3/8” 1X1 RIB NECKBAND EXCLUDE TUBULAR: -INVISIBLE BIND-OFF HEM -LINKED INSIDE CF -SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
SIDE SEAMS: LINKED ON INSIDE
3 1/4” 1X1 RIB SEAMLESS BODY HEM: INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
3 1/4” 1X1 RIB SEAMLESS SLEEVE CUFF: INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
5/16” TUBULAR FINISH
UNDERARM SLEEVE SEAMS: LINKED ON INSIDE ARMHOLES: SLEEVES ARE LINKED TO BODY ON INSIDE
FRONT BACK
4MM DISTANCE BETWEEN EACH RHINESTONE
75 RHINESTONES ON ONE SIDE
150 RHINESTONES TOTAL SIZE M ONLY - QUANTITY AND PLACEMENT WILL BE GRADED CABLE SIZE:
6 ON EACH SHOULDER SIZE M ONLY - QUANTITY AND PLACEMENT WILL BE GRADED
1/4”
1/2”
1 3/8” 1X1 RIB NECKBAND EXCLUDE TUBULAR:
-INVISIBLE BIND-OFF HEM -LINKED INSIDE CF -SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
SIDE SEAMS: LINKED ON INSIDE
3 1/4” 1X1 RIB SEAMLESS BODY HEM:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
3 1/4” 1X1 RIB SEAMLESS SLEEVE CUFF:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
5/16” TUBULAR FINISH
ARMHOLES: SLEEVES ARE LINKED TO BODY ON INSIDE
UNDERARM SLEEVE SEAMS: LINKED ON INSIDE
1 1/4” 2X2 RIB SEAMLESS NECKBAND: JOINED TO BODY WITH LINKING ON INSIDE SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
SIDE SEAMS: LINKED ON INSIDE
2 3/8” 2X2 RIB SEAMLESS BODY HEM:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
2 1/2” 2X2 RIB SEAMLESS SLEEVE CUFF:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
UNDERARM SLEEVE SEAMS: LINKED ON INSIDE ARMHOLES: SLEEVES ARE LINKED TO BODY ON INSIDE
NECKBAND JOIN AT WEARER’S LEFT: LINKED ON THE INSIDE
SHOULDER SEAM: LINKED ON INSIDE STITCH TO STABILIZE SHOULDER
= 2X2 RIB
1 1/4” 2X2 RIB SEAMLESS NECKBAND:
JOINED TO BODY WITH LINKING ON INSIDE SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
SIDE SEAMS: LINKED ON INSIDE
2 3/8” 2X2 RIB SEAMLESS BODY HEM:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
2 1/2” 2X2 RIB SEAMLESS SLEEVE CUFF:
INVISIBLE BIND-OFF HEM WITH SINGLE ROW OF ELASTIC THREAD ON INSIDE EDGE
ARMHOLES: SLEEVES ARE LINKED TO BODY ON INSIDE
UNDERARM SLEEVE SEAMS: LINKED ON INSIDE
NECKBAND JOIN AT WEARER’S LEFT: LINKED ON THE INSIDE
SHOULDER SEAM: LINKED ON INSIDE STITCH TO STABILIZE SHOULDER
84 RHINESTONE RIVETS TOTAL 42 ON EACH SHOULDER SIZE M ONLY - QUANTITY AND PLACEMENT WILL BE GRADED FRONT BACK
3-PIECE 1 3/8” MITERED NECKBAND: JOIN ON INSIDE WITH 4-THREAD OVERLOCK
1/8” SELF PIPING AT NECK SEAM: CLEAN FINISH PIPING TOWARDS
NECKBAND;
1/8” SINGLE NEEDLE CHAINSTITCH ON BODY
SIDE SEAMS:
JOIN ON INSIDE WITH 4-THREAD OVERLOCK
3” BODY HEM BAND: -JOIN ON INSIDE WITH 4-THREAD OVERLOCK -1/4” DOUBLE NEEDLE COVERSTITCH ON SEAM
3” SLEEVE CUFF: OIN ON INSIDE WITH 4-THREAD OVERLOCK
1/8” SELF PIPING AT CUFF SEAMS: CLEAN FINISH WITH PIPING TOWARDS CUFF; 1/8” SINGLE NEEDLE CHAINSTITCH ON SLEEVE EDGE
3/8” TWILL TAPE AT INNER BACK NECK SEAM: SINGLE NEEDLE EDGESTITCH AT TOP AND BOTTOM
ARMHOLES, SHOULDER, TOP SLEEVE SEAM: -JOIN ON INSIDE WITH 4-THREAD OVERLOCK -1/4” DOUBLE NEEDLE COVERSTITCH CENTERED ON SEAM
UNDERARM SLEEVE SEAMS: JOIN ON INSIDE WITH 4-THREAD OVERLOCK
NECK JOIN: CLEAN FINISH