JOINERS Magazine September 2026 by joiners

Joinery, Cabinetmaking & Kitchen Manufacturing Industries

September 2026

opening doors systems and hardware

5-axis CNC’s one pass for them all

sink selection pics, tips and guides

The fourth edition of the A Book has arrived. All in-stock products, one easy catalogue. Showcasing Häfele’s stocked range for the New Zealand market, the new Ä Book makes it easier to browse, specify and order the products you need. Scan the QR code to explore today.

sales@hafele.co.nz www.hafele.co.nz

Hawa Concepta III 15 Pocket system for low height cabinets.

The Hawa Concepta III Family is expanding: An innovative solution for lower cabinet heights has been added to the range, ideal for appliance garages, coffee bars, wine stations and much more.

The NEW Häfele Sliding Door Specification Service.

Scan QR code to get started

Choosing the right sliding door system can be overwhelming. With Häfele’s Sliding Speciﬁcation Service, simply scan the QR code to submit your form and plans, and our specialists will recommend the best system and provide a tailored hardware estimate. JOINERS Magazine September 2026 page 1

JOINERS Magazine September 2026 page 2

5-axis CNC’s 18 COVER PPG coating systems photo courtesy The Custom Finish - p.62

COLUMNS Master Joiners 4 Nathan Moore reflects on the importance of being connected to the industry around us and the role that Master Joiners membership plays in this.

When it comes to complex work with both panel and solid wood, 5-axis CNC’s provide the precision and ﬂexibility to achieve complicated results with automated simplicity. We have commentary and case studies from suppliers and users.

Doors & hardware 34 Swing, lift, pivot, slide - our leading door manufacturers have specialist hardware for every requirement and every project. We cover the range from the traditional hinged to the modern pocket system, and the hardware that makes them work.

Laminex Update 14 Rachel Silcock relates the importance Laminex place on local investment with the company’s nearly finished Taupo plant strengthening its manufacturing capability in NZ.

NKBA news 72 Rachael Kwok discusses the importance of common standards across design and manufacture with the release of two new industry resources covering bathroom design and drawing guidelines.

Supreme works 50 The Master Joiners Supreme and Premier Awards are awarded each year to the best in timber design and cabinetry manufacture. We look at the 2026 winners from SB Joinery in Pahiatua and Advanced Joinery in Christchurch.

Steering a Course 76 Ian Featherstone addresses the age old manufacturing dilemma of time and capacity with a few suggestions on how to handle upstream and downstream pressure on your schedule.

Sink solutions

Aesthetic, functional and priced to market, benchtop and sink selection covers a multitude of materials, styles and price points. Two leading suppliers, Archant and Hafele, show some of their latest oﬀerings with a little advice to help the process.

REGULAR

Safety checks 74

News & Info 4-16

WorkSafe visited over 100 joinery shops in the ﬁrst three months of the year with a high percentage having issues with protective equipment and hazardous substances. They sent us this report on their activities.

State of the Industry 78 NZJMF membership 80 Classiﬁeds 88 Advertiser index 88

Automation has arrived - what now? - p.86 JOINERS Magazine September 2026 page 3

from the president September 2026

Connecting to the network Since my last report, we have held the Master Joiners AGM, providing a good opportunity to reflect on the past year and look at where our focus needs to be going forward. The past year has not been easy for many members. Workloads remain patchy, costs are still high, and conﬁdence across the wider construction sector continues to vary from region to region. While there are some encouraging signs, the reality is that many businesses are still working through reduced workloads and tight margins. In times like these, the value of being connected to others in the industry becomes even more important. Master Joiners is not just about a name or a logo. It is about having a network of people who understand the challenges

of running a joinery business and who are prepared to share knowledge, support one another and work together for the good of the industry.

immediate or highly visible results, but staying involved and continuing to put forward the real experiences of our members is important.

Membership renewals have recently gone out, and I encourage all members to take the time to look at the work being done on their behalf. Over the past year this has included advocacy, careers promotion, industry reports, salary benchmarking, professional development, branch activity, complaints support and ongoing work around health and safety and industry standards.

Attracting and developing the next generation also remains one of our biggest challenges. We need more young people to see joinery as a skilled, modern and worthwhile career. That means continuing to promote the trade, supporting apprentices and making sure training reﬂects the technical skills, digital systems and problem solving now required in our workshops.

Advocacy continues to be a major focus. We need to make sure joinery is properly understood and represented when decisions are being made around vocational training, workforce development, immigration and standards. This work does not always produce

There is also a lot happening behind the scenes. Work is continuing to improve member services, strengthen health and safety and standards support, lift the visibility of members online and plan future events, including the 2027 Conference.

JOINERS Magazine September 2026 page 4

None of this happens without the time and eﬀort of our members, branch representatives, volunteers, Council and the national oﬃce team. Thank you to everyone who continues to contribute. The strength of Master Joiners has always come from its people. As we move into spring, let us remain realistic about the challenges but positive about the opportunities ahead. Keep talking to each other, keep supporting local members and keep promoting the quality and professionalism that sets a Master Joiner apart.

Nathan Moore National President Master Joiners

EgmontAir D u s t & Fu me E x tracti on

Your dust extraction specialists 0800 781 200

• Create a cleaner and more productive workshop

A BREATH OF FRESH AIR FOR YOUR WORKPLACE

• Protect your employee’s health with the latest in dust extraction • Phone for technical advice or information

• Wood Dust Extraction • Exhaust Fumes Extractors

• Welding Fume Extraction

• Centralised Extraction Systems

• Spray Booths

• Extraction Fans

• Suction Benches

• Grinding Dust Extractors

EgmontAir D u s t & F u m e E x t ra c t i o n

sales@egmontair.co.nz www.egmontair.co.nz

0800 781 200 Fax 06 278 1225

JOINERS Magazine September 2026 page 5

from the Publisher

The magazine for the joinery, cabinetmaking & kitchen manufacturing industries Oﬃcial Publication of the New Zealand Master Joiners Incorporated

Editor Michael Goddard michael@joiners.net.nz

Publisher

Master Joiners 2026 Premier Award winner p.53

Bob Nordgren bob@joiners.net.nz

Conference at an exciting venue

t has been an interesting quarter especially with the Master Joiners Conference held in May in Queenstown. We covered all the major winners in our June issue. It was held over two days, in wonderful Queenstown. Although I missed the Friday I arrived in time for the Master Joiners Awards on the Saturday. All the reports I have heard have been very positive about the programme content. The Awards night was very pleasing even with a much smaller number attending. A nod to the organising team from Master Joiners: a job well done. Congratulations must go to all the Award winners and especially the Supreme and Premier Award winners. They were outstanding. We have coverage of both in this issue. I had never been to the Millbrook Estate before but it was amazing and I fully understand why it is such a successful golf course and event venue. We have a full house once again with some eye catching storylines. Complex manufacturing is an interesting one with a look at the top end machinery – 5 axis CNC’s – with some interesting stories such as a look at casket manufacturer Windsor Industries and the latest from the mainstream CNC machinery manufacturers. Perennial pictorial favourite door hardware is once again well represented. Always something new in that ﬁeld. The other main feature looks at the world of sinks and benchtops, once again lots from some of our leading suppliers here in New Zealand. Looking forward now to the coming spring then summer and hopefully more stable times around the world. Bob Nordgren

JOINERS Magazine September 2026 page 6

42 Aldersgate Rd, Box 27-513, Mt. Roskill, Auckland, 1440. Ph: +64-9-624 4680

Subscriptions & Mailings bob@joiners.net.nz

JOINERS Magazine Online www.joiners.co.nz

PRINTERS

DISTRIBUTORS

ISSUE NUMBER 124 ISSN 1173-6836 (Print) ISSN 3142-1229 (Online) JOINERS Magazine is the oﬃcial publication of the New Zealand Master Joiners Incorporated. It is distributed to members of the joinery, cabinetmaking and kitchen manufacturing industries and is published quarterly in March, June, September and December. Advertising statements or editorial opinion are not necessarily those of the publisher, its staﬀ, the New Zealand Master Joiners Incorporated or their executives, unless expressly stated. All articles printed in JOINERS Magazine are subject to copyright and cannot be reproduced without the express consent of the Publisher or the authors therein. Advertisements and articles are accepted without liability as to the accuracy or otherwise of the factual matters represented.

JOINERS JOI JO J OI O NER NE N ER ERS Maga Ma M Magazine agaz ga gazine azin az ne e Sep September S ep e ptem temb ember be be err 2026 2026 20 6 page pag pag age e7

Boris Chernyshev, CEO, SCM Group Australia.

Ruth Cooper.

SCM invests in New Zealand SCM announces the strengthening of its presence in New Zealand with the introduction of a new directly managed local organisation working alongside local dealer Machines R Us. This strategic investment conﬁrms the Group’s commitment to laying the foundations for future growth in the woodworking industry, despite the current challenging macroeconomic environment. SCM has been present in the New Zealand market for around 40 years through a network of local partners and, over the past ten years, has worked with Machines R US, developing an in-depth understanding of the needs of companies operating in the region. Following the appointment of two specialised professionals dedicated to sales and technical service activities, SCM’s goal is to progressively expand the local team over the coming months. SCM’s direct presence will enable the Group to work even more closely with woodworking companies requiring specialised expertise in SCM solutions, with a particular focus on high technology projects, engineering and integrated solutions aimed at improving efficiency, flexibility and process optimisation, while helping manufacturers address the shortage of skilled labour. The new SCM team will work in close collaboration with Machines R US, leveraging the complementary strengths of both organisations to provide New Zealand woodworking companies with comprehensive solutions, expert advice and improved aftersales services. Machines R US will also continue to serve as the sole dealer in New Zealand for the other Italian brands of the Group, Mecal Machinery and CMS specialised on non-wood applications. “SCM’s direct entry into the New Zealand market represents an important investment and is fully aligned with our international growth strategy,” comments Boris Chernyshev, CEO of SCM Group Australia. 

JOINERS Magazine September 2026 page 8

John Fraser-Mackenzie,

Competenz & EMA strengthen support for NZ businesses Competenz and the EMA (Employers and Manufacturers Association) have announced a new partnership that extends support for employers beyond apprenticeships and vocational training into broader business capability. With both organisations supporting thousands of New Zealand businesses across engineering, manufacturing and trades sectors, the partnership gives Competenz employers access to practical business support that extends beyond training, including employment relations and legal services, HR resources, and leadership and health and safety courses at EMA member rates. Employers new to the EMA will also receive a discount on their first year of membership. Ruth Cooper, Executive Director of Competenz, said the partnership reflects a deep understanding of what our industries and employers need. "We know our industry trades, and engineering and manufacturing employers inside out. We understand what it takes for them to be high performing, sustainable and future-focused, and everything we do is built around that. This partnership with the EMA means our employers now have access to employment relations expertise, HR resources and leadership development alongside the vocational training we already provide.” She says the integrated approach gives businesses more confidence to lead well, and the EMA’s guidance can help managers to meet their obligations and grow capable, connected teams, delivering value for employers, learners and the wider New Zealand economy. John Fraser-Mackenzie, EMA’s Chief Executive, believes the partnership will ultimately strengthen New Zealand's workforce, productivity and business growth. “We're really looking forward to working more closely with Competenz. Both of our organisations are passionate about helping businesses build the skills they need for the future. There's a real opportunity for us to achieve more together than we can on our own. I am confident that this will help grow capability, creating more opportunities for apprentices and learners.” Beyond service delivery, the two organisations will advocate together on skills development and workforce capability policy with government and industry. The partnership reflects Competenz's next chapter as an industry-owned organisation, broadening the services available to employers while continuing its focus on high-quality vocational education. 

Your NEW Dust Extraction partner.

RAC-5000 RAC A 5000

From concept to Clean Air, we've got you covered.

We offer guaranteed competitive pricing & service that's second to none.

DD-2150

Clean Air Technologies

Tired of expensive dust extraction systems?

We design and manufacture dust extraction systems right here in New Zealand, ensuring quality you can trust and service you can count on.

Why choose IES ?

Dust Collectors Extraction Fans Modular Ducting Systems Flexible Duct

Guaranteed Competitive Pricing

Expert Backup Service

Rotary Valves

Immediate Availability

Down-draught Sanding Tables Extraction Arms

Seamless Solutions

Innovative Waste Handling

NZ Made Quality

Spray Booth & Drying Rooms Shredders & Briquette Machines

Request a FREE On-Site appraisal & airﬂow report. Call us on

0800 140 040 Online Store

Proudly

NZ made

i-e-s.co.nz JOINERS Magazine September 2026 page 9

Hafele hosts Master Joiners In mid August the Auckland Master Joiners held one of their regular meetings at the headquarters of Hafele NZ in Auckland’s East Tamaki. These meetings enable Auckland members to catch up with fellow members and ﬁnd out about any new developments. While convened by Secretary Michael Bangs, Auckland President Rob Pickup gave an interesting resume of the Master Joiners Conference held in Queenstown along with other business matters. Hafele as host had a quick chat about a couple of new products including their sliding door range explained by Key Account Manager Braden Lye (pictured) then after the meeting they put on a few refreshments. Auckland Master Joiners wish to thank Hafele for the use of their facilities. 

Nick Carajannis to head Porta NZ Porta is pleased to welcome Nick Carajannis to the team as Head of Porta NZ. Following the successful introduction of polytec to New Zealand late last year, Porta is now focused on further strengthening its presence, with plans to expand into the South Island. Nick will play a key role in driving this growth, developing the brand and building strong relationships with customers and industry partners across the country. A highly respected leader, Nick brings a wealth of industry knowledge, experience and leadership to the role. His appointment marks an exciting next chapter for Porta NZ as the business continues to grow and expand its oﬀering to the New Zealand joinery industry. 

JOINERS Magazine September 2026 page 10

With the Cheque. Carl Arnold - Managing Director of Kitchen Mania, Richie Barnett - representing the I Am Hope Foundation, Lee Barlow - Biesse Australia & NZ Sales Director and Darren Reeves-Smith, Blum’s Christchurch Account Manager.

Biesse Open Day Industry collaboration shares knowledge & supports charity Early September saw this years edition of the annual Biesse open day at their Wiri show room in Auckland. Along with partners Blum and Kitchen Mania, Biesse hosted a tech showcase featuring the latest in their multi material manufacturing solutions along with product from trade partners in door systems, software, dust extraction, panel and hardware. All the while supporting the I Am Hope Foundation who are dedicated to saving lives in our community. Visiting manufacturers from around the region were able to view live demonstrations of Biesse machinery covering the processing of timber, panel, glass and stone before being ferried to several factories around Auckland to see similar machines used in specific applications at Kitchen Mania in Mt Wellington, Next Level Joinery on the North Shore and Western Caskets in Kumeu. Contributions from those enjoying the visit were matched by Biesse and its support partners to provide a sizable cheque in support of the I Am Hope Foundation.

Back at the Biesse Showroom attendees were again able to discuss aspect of business and Biesse’s manufacturing options along with the opportunity to discuss product with trade representatives of Blum, polytec, Joinery IT, Airtight Solutions and Robertson & Sinclair, effectively enjoying a one stop shop opportunity covering most of the requirement in a modern manufacturing shop And as with previous editions, amongst all the talk and networking Biesse showed their usual skill and style in hosting an excellent barbecue lunch and refreshments for all those present. 

-ƺ[^PMNXQ /:/ and Edgebander Solutions

Rover Multi Go 1224 N G

Rover Edge Go 11 J

Starting from

$135,000.00+ GST

$65,000.00+ GST

CNC Machining Centre - Compact nesting CNC machining centre for small – medium sized Na_UZQ__Q_ 0Q_USZQP `[ ƻ` _QMYXQ__Xe UZ`[ XUYU`QP spaces, it brings automation, consistent quality and ^Q\QM`MNXQ ^Q_aX`_ QbQ^e `UYQ

$16.50 per hour

A simple, easy-to-use edgebanding solution with integrated premilling and corner rounding, PQXUbQ^UZS M O[Y\XQ`Q MZP \^[RQ__U[ZMX ƻZU_T

$7.90 per hour

Rover Edge Go 11 J + Hyfuse Starting from

$110,000.00+ GST Zero-joint technology package deal. Discover HyFuse, the latest plug&play solution for glueless technology and a _a\QÛ[^ ƼMcXQ__ ƻZU_T QbQê ÙYQ

$13.50 per hour

All prices include delivery, installation and a starting tool package, conditions apply. Finance is based on 5 year term (no balloon in NZ) and based 40 hours/week

Info.nz@biesse.com 0800 BIESSE (243 773)

JOINERS Magazine September 2026 page 11

Celebrating a new era of opportunities & inspiration Blum Reno On 2 July the team at Blum held a celebration to mark sixteen years since they opened their purpose built head office, showroom and warehouse facility in the Auckland suburb of Avondale. The building is the same as back in 2010 but the interior has undergone a number of significant changes which invited guests were shown in four mini tour groups kicking off in the early afternoon. I started off with the kitchen test drive and Age Explorer® where we learned about how customers and designers can use the space to test their kitchens in real ratios. One of the guests put on the Age explorer® suit to show how you can experience aging and the significance of designing kitchens that will last you for future aging requirements. Then our group moved to the warehouse facility where Managing Director Mike Hawkins took us through their expanded automatic warehouse and new crane system functions and staff in action. Of real interest to me was the next session where we learned about Blum’s newest product called PLICOBOX, a new concept for storage in living spaces. Simple: Fold. Push. Done! without tools. We also learned the latest in Blum marketing and various machines and jigs they have on offer.

lum Auckland recently unveiled its redesigned Auckland showroom with a sensational celebration. Over 100 cabinet makers, designers and industry partners joined the Blum team in a day not to be forgotten. Blum hosted workshops on new products, conducted a tour of the new automated warehouse system, and showcased the stunning new displays throughout the day. Once the afternoon turned into evening, a lively Oompah band pied-piped the guests into Blum's very own beer tent, the “Golden Hinge’’, to celebrate the opening in style.

JOINERS Magazine September 2026 page 12

Blum can’t wait to bring our loyal and valued friends and business partners through the space in many more smaller, intimate settings over the coming months. Want to organise a Showroom and Warehouse tour for your company? Touch base with your Blum Account Manager to arrange a time to suit you.

The final session was a look at the new showroom. This was for me the most impressive session. It heralded a signiﬁcant shift for Blum: a tour of their latest products and how Blum is now moving into the whole home and not just a kitchen focus. Blum’s Sales Manager Joseph Eggers adeptly took us around the various rooms in the house where Blum is now making inroads. It is a showroom worth a real gander. Through all of this there was a lot of tasty food and wine on oﬀer which culminated after the four tours were done with a classic Blum Party with music food and drink to christen the new look Blum HQ. My thanks to the team for their great hospitality. Bob Nordgren

Resene AquaLAQ

Water Based Paint Licence No 1296003

Waterborne low VOC coating system for cabinetry, joinery, shop fittings, kitchens and doors

• Economical • Hard and Durable • Waterborne 1K System • Authentic Resene colours

AquaLAQ is waterbased, low VOC, low odour and Eco Choice Aotearoa certified. Better for your business and better for your customers.

Call 0800 108 008 or email help@reseneauto.co.nz to become a trained and registered applicator | reseneauto.co.nz/aqualaq

JOINERS Magazine September 2026 page 13

Laminex New Zealand™

update

Investing in local

s we head into the final quarter of the year, there’s been plenty happening at Laminex worth sharing with you all. Our Taupō plant remains front and centre of our investment programme, and momentum continues to build. This is one of the most significant manufacturing investments Laminex has undertaken, and it’s exciting to see it taking shape. The plant will see us transition from traditional particleboard to our NEW locally produced Fine Strand board; strengthening our manufacturing capability right here in New Zealand. For our customers, this means greater supply continuity and confidence that the products you rely on are grown, manufactured, and supplied on home soil. In a world where global supply chains remain unpredictable, that’s something we don’t take for granted, and it’s a big part of why I’m so proud of the team driving this project forward. Investment in local manufacturing isn’t just about the plant itself. It’s about the capability we’re building around it, the skills, the systems, and the people who make it all work. Every step we take towards commissioning Taupō is a step towards a more resilient supply chain for the joinery industry, and we’ll keep you updated as the project progresses towards commissioning. I also want to say thank you to everyone who took the time to complete our Net Promoter Score survey. We know your time is precious, so we genuinely appreciate the honesty and detail so many of you shared with us. Your feedback covered everything from ordering and delivery through to product quality and support, and it’s given us a clear, honest picture of where we’re getting it right and where we need to lift our game. Our team is currently working through the results in detail, and we’ll be developing a set of actions and improvements based on what you’ve told us. This isn’t a box-ticking exercise for us; it’s a genuine opportunity to strengthen the way we work with you. We’ll share more on the specific changes we’re making as this work progresses, and we’d encourage you to keep the feedback coming, formally through surveys like this one, or simply through your regular contacts at Laminex. As always, thank you for your continued support and partnership. It’s customers like you that make investments like Taupō worthwhile, and we look forward to sharing more good news as the year continues. Rachel Silcock General manager Laminex New Zealand

JOINERS Magazine September 2026 page 14

JacksTech has been well supported by industry.

JacksTech 2026 The future of joinery manufacturing Jacks is pleased to announce the return of JacksTech in 2026, showcasing the latest developments in machinery, automation, safety and smart manufacturing.

700 series, bringing high-level safety technology to a wider range of workshops. The event will also showcase CNC solutions, laser edgebanding and 6-sided processing.

JacksTech provides a practical opportunity to see how technology can improve efficiency and reduce labour costs. Through live demonstrations and expert discussions, visitors can see how modern solutions can beneﬁt their own workshops and production environments.

“JacksTech is about showing manufacturers what’s possible, while focusing on solutions that make sense in Kiwi workshops,” says Dylan Staples. “Whether businesses are looking to reduce labour pressures or increase productivity through technology, there will be something valuable to see.”

A major highlight will be the ﬁrst appearance in New Zealand of KDT’s MesEdge “Smart Factory” technology. MesEdge connects individual working cells into one integrated smart factory, allowing diﬀerent production cells to seamlessly work together.

The show also connects visitors with industry partners and suppliers, creating valuable opportunities to speak directly with the experts behind the software, materials and hardware that support their businesses every day.

Another key theme is aﬀordable automation. Automation is no longer only for the largest manufacturers. JacksTech will demonstrate practical ways businesses implement automation to reduce the reliance of skilled labour on the workshop ﬂoor. Safety will also be front and centre, with demonstrations of Felders PCS panel saw safety technology. Now available across the Felder range including the

Jacks Auckland East Tamaki 16th & 17th of September. Scan the QR code to register your attendance.

From here. Formed here. For here. New to the Laminex New Zealand range, STRANDFSB™ is made from fibre sourced from locally grown pinus radiata, to create durable, high-quality substrate products. Widely available across the country, they go on to become quality kitchens, bathrooms and laundry cabinets made in New Zealand, for New Zealand. Interested to find out more? Contact your Laminex Business Partner.

laminex.co.nz JOINERS Magazine September 2026 page 15

B&M Joinery

Crafting more than joinery T

he Myles Sellers Memorial Trophy recognises outstanding culture in joinery. It acknowledges a joinery business that demonstrates awareness of the challenges and opportunities present in an industry reliant on good people. The award reflects how Myles and his wife, Margarette, valued their workforce and believed a business could be a family - celebrating businesses that put people first by creating supportive workplaces, embracing change with empathy, encouraging teamwork and learning, communicating openly, and fostering a strong sense of belonging. This year that recognition goes to B&M Joinery, Cromwell - a business where culture is genuinely lived day-to-day, not just talked about. Staff are trusted to work flexibly around life, and that care is practical and proactive: paid time for counselling, mental health resources and wellbeing workshops, plus small but meaningful touches like winter health support, soup lunches and PJ Days dreamed up by the team themselves. Culture is also built on connection and a good laugh. Milestones and daily wins get celebrated, and the calendar is dotted with go-kart days, bungy outings and an increasingly legendary potato-growing contest — complete with Mr Potato Head trophies (their Instagram is worth a scroll). It's the kind of light-hearted tradition that builds real camaraderie. Alongside the fun, the business invests heavily in its people's growth: mentorship runs at every level, training is funded well beyond what's required, and international staff are supported through the residency process — support that's seen many choose to stay for years, not months, because of the environment they find here.

The B&M Joinery team on awards night (from l-r): Designer Ashley Blacker; Owners Brendon & Kate Munro; Oﬃce Administrator Amy Samuels and Foreman Clint Williams.

“It is the conversations in the oﬃce doorway. It is the support during diﬃcult seasons. It is the laughs during smoko - the willingness to listen, adapt, improve and genuinely care about people.” B&M Joinery, 2026 Myles Sellers Award submission

Paired with strong community involvement – support for local sports teams, school initiatives, community fundraising events, youth programmes and more - and leadership that stays genuinely close to the team, B&M has built a workplace where people feel valued not just as employees, but as individuals. It's a culture that reﬂects everything the Myles Sellers Memorial Trophy stands for.  The B&M Joinery calendar includes potato growing contests and go-kart days.

JOINERS Magazine September 2026 page 16

New storage pull outs. Available now.

ESSENTIO

Pure Steel. Pure Style.

ESSENTIO IJXNLSJI FSI RFIJ NS ,JWRFS^ G^ ;FZYM 8FLJQ NX IJ‫ܪ‬SJI G^ NYX JQJLFSY ‫ܫ‬TFYNSL IJXNLS ®

.YX RTSTHMWTRJ QTTP \NYM MNLM VZFQNY^ XZWKFHJX TS KTWRJI XMJJY XYJJQ XMT\HFXJX F WJ‫ܪ‬SJI QNSJFW IJXNLS FJXYMJYNH (QTXJI XMJQK JQJRJSYX FWJ IJXNLSJI \NYM XNRUQNHNY^ NS RNSI KTW F UFWJI GFHP YNRJQJXX QTTP

UNERO® MEETS ESSENTIO® Timeless Design. Smart Organisation.

:QYWF YMNS RR MNLM RJYFQ XNIJX JSXZWJ TUYNRFQ XUFHJ ZYNQNXFYNTS \MNQJ YMJ NSYJLWFYJI STS XQNU RF^ FIIX UWFHYNHFQ KZSHYNTSFQNY^ &SI KTW HTWSJW ZSNYX \NYM HZW[JX :3*74®

THE ESSENTIALS AT A GLANCE

+JFYZWNSL F \TTIJS GFXJ FSI F RR MNLM VZFQNY^ UQFXYNH XNIJ :3*74® ZSNYX FWJ IJXNLSJI YT HTRUQJRJSY *88*39.4® \NYM F RNSNRFQNXY [NXZFQ QFSLZFLJ 1F[F ,WJ^ :3*74® ZSNYX KJFYZWJ FS FSYN ‫ܪ‬SLJWUWNSY ‫ܪ‬SNXM <MNYJ :3*74® ZSNYX KJFYZWJ F \MNYJ GFXJ FSI F UQFYNSZR HTQTZWJI XNIJ 'JY\JJS YMJR YMJ *88*39.4® FSI :3*74® WFSLJX TKKJW YFQQ ZSNYX MFSLNSL XYTWFLJ ZSIJW GJSHM TUYNTSX FSI RTIJQX KTW GTYM GQNSI FSI 1 HTWSJW HFGNSJYX

PHONE: 09 431 0025 | EMAIL: info@fit-nz.co.nz |

Ѭ (QTXJI RJYFQ XMJQK RFIJ TK KTWRJI XMJJY XYJJQ Ѭ :QYWF XQNR XNIJ\FQQX RF]NRNXJ NSYJWSFQ XUFHJ Ѭ :SNKTWR IZWFGQJ UT\IJW HTFYJI ‫ܪ‬SNXM Ѭ .SYJLWFYJI STS XQNU RFY Ѭ 8NIJ MJNLMY HR Ѭ (TRUFYNGQJ \NYM TYMJW ‫ܫ‬FY TWLFSNXFYNTSFQ systems • Designed and made in Germany

fit-nz.co.nz

SCM p.28

Complex

manufacturing When it comes to more complex work with both panel and solid wood, 5-axis CNC’s provide the precision and flexibility to achieve complicated results with automated simplicity. We asked some of our leading machinery and tooling suppliers for their thoughts on the process and to share recent developments.

Homag p.20 Farnese p.26

Leitz p.25 Jacks p.24

JOINERS Magazine September 2026 page 18

Rover

Multi Up M C S - 5 Axis Technology

New Zealand’s favourite 5 axis machine. A compact and ﬂexible 5 axis machining achining centre, suitable for companies looking for precision n and versatility.

x Robust 13kw spindle, up to 24,000 00 rpm ead x Vertical and horizontal boring head x Assisted positioning Pod & Rail system x Flexible vacuum and clamping system ware x Onboard CAD/CAM B Solid software

In stock and available for demonstration

biesse.com JOINERS Magazine September 2026 page 19

CENTATEQ P-510, for larger facilities and more demanding applications

5-axis CNC with HOMAG machines, software and automation

From entry-level models to higher-output systems, HOMAG’s 5-axis portfolio combines machining capability with woodWOP programming, nesting applications, storage integration and robotic handling. A 5-axis CNC changes more than the shape of the part. It changes how the part moves through production. Operations that once needed several set-ups can often be completed in one cycle. Angled machining, profiling, trimming and routing can stay on the same machine, with less reclamping and less manual handling in between. That has clear value in joinery, furniture, stair building and interior work, where components are rarely limited to ﬂat and simple geometry. A front door may need machining on several faces. A stair part may combine angles, curves and precise detailing. A shaped furniture component may need contour work, drilling and trimming in one process. This is where 5-axis CNC earns its place. It allows more of that work to stay inside a machining cycle. The technical principle is straightforward. Along with movement in the X, Y & Z directions, the spindle can swivel and rotate. That allows the tool to approach the workpiece from diﬀerent angles instead of only from above. The result is more machining freedom, but also a more efficient process. Fewer handling steps mean less time lost between operations and less risk of error from repositioning the part. HOMAG’s 5-axis CNC range is built around exactly that logic. It covers entry-level machines for joinery shops through to larger systems for demanding component manufacture and industrial production.

HOMAG structures its 5-axis range around two machine concepts. The CENTATEQ P Series is designed for flexible machining of individual parts such as joinery components, doors, stairs, solid timber parts and shaped components. The CENTATEQ N Series takes a diﬀerent approach, bringing 5-axis capability into a nesting machine concept for panel-based production. Within both series, the range runs from entry-level machines through to larger systems for higher-output and more demanding applications. Starting point CENTATEQ P-100 & P-110 The CENTATEQ P-100 and P-110 form the entry level of HOMAG’s P Series. These machines are aimed at customers looking for 5-axis capability in a smaller format and at a lower level than the larger machines in the lineup. That makes them relevant to joinery shops and smaller manufacturers handling detailed custom work, shaped components and more varied machining tasks. A machine in this class is not there only for unusual parts. It also suits day-to-day work where angled drilling, contour routing, trimming or multi-face machining would otherwise require extra handling or secondary operations. The P-100 is the newer and lowercost entry into the range. Its role is clear. It opens the door to 5-axis machining for customers who need the flexibility of a 5-axis machining head, but not the scale of a larger production centre. The

JOINERS Magazine September 2026 page 20

CENTATEQ P-110 5-axis capability in a smaller format.

P-110 sits in a similar part of the market and remains a strong ﬁt where compact 5-axis capability is the main priority. The all-rounders CENTATEQ P-210 & P-310 The P-210 and P-310 sit further up the P Series and are better suited to workshops that need more processing scope. These are not entry-level machines. They are all-round platforms for customers combining a wider mix of work and a heavier machining load. In practical terms, that can mean traditional furniture manufacture, solid timber processing and more demanding 3D milling on the same machine. This is where 5-axis capability becomes less about occasional specialist jobs and more about regular production flow. The machine is expected to move from routine routing and drilling to shaped work, angled features and more complex geometry without breaking the process into separate stages.

For workshops running varied work across joinery, furniture and interior components, that wider operating range becomes a major advantage. Higher output P-510 & P-610 At the top end of the P Series are the CENTATEQ P-510 and P-610. These are the heavier-duty machines in HOMAG’s 5-axis line, intended for larger facilities and more demanding applications. They are well suited to the production of front doors, stairs and structural timber components, where part size, machining complexity and cycle stability all become more important. In these applications, the machine needs to do more than provide access to angled machining. It also needs the rigidity, tool capacity and working range to carry a signiﬁcant production load. (cont over page)

HOMAG iX 2025: See it before it’s built AI visualisations, synchronised data, and clean handovers to the shop ﬂoor. AI-generated images help customers say yes sooner. HOMAG iX 2025 brings practical AI to interior design and furniture production. With iX Render AI, create photoreal visualisations straight from your plan in seconds. The system reads materials, lighting and perspective to produce convincing images without extra software or special skills, helping decisions land faster. HOMAG iX 2025 also makes everyday work easier and keeps data in sync, so projects move from idea to approval faster.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine September 2026 page 21

5-axis CNC with HOMAG (cont)

The CENTATEQ P210 and P-310, the all-rounders capable of heavier workloads and wider workflow ranges.

This is where the larger P Series machines come into their own. They are designed for operations where 5-axis machining sits at the centre of the process rather than on the edge of it. Five-axis nesting N-510 and N-600 Alongside the P Series machines, HOMAG also offers 5-axis machining in a nesting format through the CENTATEQ N Series. The N-510 and N-600 are built for panel-based production, where sheet efficiency and process speed remain central but more complex machining also needs to be brought into the same workflow. That combination matters in cabinet work, modern kitchen production, interior fit-out and other applications built around MDF, plywood and similar panel materials. A standard nesting machine is highly effective for cabinet parts and rectangular components. The added value of a 5-axis spindle comes when the same machine also needs to handle angle cuts, shaped machining or more detailed routing directly on the nesting table. This is often described in practical terms as an 80/20 split. Most of the work remains fast, efficient nesting. The smaller share of the workload uses the 5-axis spindle for the parts that sit outside a standard panel-processing cycle. That approach allows a panel processor to keep more work on one machine rather than sending special parts into another operation.

Matching the machine to the work One of the strengths of HOMAG’s 5-axis offer is that it does not push every customer toward the same machine concept. The right choice depends on the material, the part geometry and the overall production method. A machine from the P Series is better suited to clamped individual parts, solid timber components, doors, stairs and workpieces that need access from multiple sides. A machine from the N Series makes more sense where fullsheet processing is the basis of production and nesting remains the most efficient route. That is why the specification on its own never tells the whole story. Two machines may both offer 5-axis capability, but they solve different production problems. Programming with woodWOP woodWOP is an important part of HOMAG’s CNC concept. It is the company’s standard programming software and is used across the machine range. That gives customers a consistent programming environment, whether they are working with entry-level 5-axis machining or more advanced production set-ups. This becomes even more important in 5-axis processing. Angled operations, shaped parts, contour machining and multi-face components place higher demands on programming than standard

CNC work. The software needs to support that clearly and reliably in day-to-day production. In practice, woodWOP helps define machining operations, adapt programmes and reuse proven processes. That makes programming more manageable and helps customers get the full benefit from the machine on the shop floor. Automation around the CNC HOMAG also offers ways to integrate the CNC into a more automated production set-up. One option is the connection to a horizontal storage system, allowing panels or components to be supplied to the machine in a more organised and efficient flow. This can reduce manual handling and help keep production moving more consistently. Another option is robotic handling. Robots can support loading, unloading or part transfer around the CNC, depending on the application. This helps reduce manual steps around the machine and can support a smoother production process. An important point is that this does not have to happen all at once. Customers can start with the machine itself and then add storage or robotic support later, as requirements change. That gives the CNC a role within a broader production set-up rather than as an isolated machine.

The CENTATEQ N-510 and N-600, nesting formats for speed and eﬃciency in panel processing alongside more complex machining in the same workflow.

JOINERS Magazine September 2026 page 22

Sales, service and support HOMAG Australia is responsible for sales, installation and service for these machines, with sales and service staff on-site in New Zealand. That gives customers direct access to local support, from the first project discussions through to installation and aftersales service. The support offer includes machine installation, spare parts supply and technical service, backed by hotline and remote service for fast assistance when needed. This combination of onsite presence and direct technical support helps customers keep production moving and gives them a clear point of contact across the life of the machine. A structured 5-axis range What stands out in HOMAG’s line-up is the way the 5-axis range is divided between two clear machine concepts. The P Series is aimed at flexible machining of individual parts, while the N Series is built around nestingbased panel processing. Together with woodWOP, service support and options for storage and robotic handling, the range gives customers more than a single machine choice. It gives them different ways to build the CNC solution that fits their production.

www.homag.com

It’s so easy to stay connected. I just ring toll-free 0800 HOMAG1 0800 HOMAG1 — the easiest way to stay connected! We value our relationship with our customers and strive to make your experience with us as smooth as possible. Whether you need assistance with ordering spare parts, seeking technical guidance, or discussing your woodworking requirements, our friendly and knowledgeable team is just a phone call away.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine September 2026 page 23

When FMI began looking for a CNC machining centre, it needed a machine capable of machining the door face and producing mortice recesses for hardware on the edges.

The Felder Format4 profit H350 provides for current needs and future expansion.

Five axes, one smart investment Fairview Metal Industries (FMI) was established in Timaru in 1968. Just three months after opening, the factory was destroyed by fire. Despite that diﬃcult beginning, the company rebuilt and has gone on to become one of New Zealand’s largest manufacturers of aluminium windows and doors, manufacturing the inputs for producing aluminium joinery. Today, FMI operates from Mt Wellington, Auckland, producing aluminium joinery for residential and commercial applications. Among its innovations are XPS entry doors, manufactured onsite using aluminium skins bonded to a high-performance foam core. “Our XPS doors use our own unique capping design, which strengthens the door and helps us achieve an H1 thermal rating,” says FMI’s Chris Kostopoulos.

ultimately decided that a 5-axis CNC offered more flexibility,” Chris explains. “One priority was avoiding aggregates wherever possible. They require regular servicing and don’t give us the same ﬂexibility as a spindle that can move in ﬁve directions. We also didn’t want to limit what the machine could do in the future. Who knows what we might need it for in a few years? The 5-axis gives us more options.”

Manufacturing onsite allows FMI to produce custom sizes and cut hardware openings wherever required. The company stocks panel blanks to be able to produce its popular sizes and colours with an industry leading turnaround time, while custom orders can often be completed in less than a week.

FMI selected a Format4 profit H350, manufactured by Felder in Austria and supplied and supported by Jacks. “I was already familiar with Format4” says Chris. “I knew the machines were well built and had conﬁdence in them and the support that came with it.”

When FMI began looking for a CNC machining centre, it needed a machine capable of machining the door face and producing mortice recesses for hardware on the edges. “A 4-axis machine would have done the job, but we

FMI chose a pendulum-processing conﬁguration with a bumper-bar safety system. While pendulum processing is not in regular use, it provides additional capacity as demand for XPS doors grows. “It means we can increase production without needing to invest in another machine,” Chris says.

JOINERS Magazine September 2026 page 24

The bumper-bar system has also proved valuable during everyday operations. When sizing doors, operators sometimes need to remove oﬀcuts from the front of the machine. The system keeps this area accessible while protecting operators if the machine moves into their working space. Many FMI doors are manufactured to custom dimensions and feature vertical grooves on the faces, making accurate pod positioning essential. “The pods need to sit on a ﬂat surface and can’t overlap the grooves,” Chris explains. “If they do, the vacuum clamping can be compromised.” The wide range of vacuum pods available for the Format4 CNC, combined with the Format-4 ‘lightPos’ positioning system, has simplified this process. Using the machine’s software, operators can position the door graphically, identify the grooves and arrange the rails and pods to create the optimum clamping arrangement. Once the setup is established, lightPos uses a series

of illuminated indicators to show operators exactly where to move the rails and pods.“It’s a fantastic system and saves us a lot of setup time,” says Chris. After almost three years of production, FMI is pleased with the CNC’s performance.“We’ve had a couple of minor issues, but nothing outside the ordinary for a sophisticated machine like this,” Chris says. “Jacks have been onsite very quickly and have resolved those issues without unnecessary delays.” For FMI, the Format4 proﬁt H350 provides more than five-axis machining capability. It delivers the flexibility to manufacture complex, customised doors efficiently, while giving the business the capacity to respond to future demand.

Felder are sold and serviced in NZ by Jacks

A 5-Axis revolution with Leitz NiRo When a machining application demands complex angles, long tool extensions and high levels of precision, the performance of the CNC machine is only part of the equation. The tooling interface plays an equally important role in achieving the required accuracy, surface finish and consistency. When Gantiel Vensott Engineering Plastic Solutions invested in a new 5-axis Biesse CNC router, the company gained the capability to take on more complex machining applications. But to get the best from the new machine, the tooling interface also needed to deliver the required prevision and stability. Working with Leitz Tooling Systems, Gantiel Vensott upgraded all 21 tool holders on the machine to the Leitz NiRo Collet Chuck Premium. Stability and Precision Gantiel Vensott provides engineering and manufacturing solutions using high-grade thermoplastics, producing components including bushes, bearings, gears, guards and guides. Te c h n i c a l M a n a g e r, L o u i e Zacharopoulos, understood that the new 5-axis machine would create opportunities for more complex work, but also place greater

demands on the tooling system. “We needed better tooling interfaces for perfect finishes and longer tool life.” Previous machining had sometimes resulted in vibration marks, material waste and applications that could not be undertaken effectively due to equipment and tooling limitations. Leitz worked with Zacharopoulos to identify a solution, introducing the NiRo Collet Chuck Premium. A more stable tooling interface The NiRo system combines high clamping forces and precision concentricity with a slim geometry, designed to support stable CNC machining. For Gantiel Vensott, the benefits were particularly noticeable when machining with long, slender tools and undertaking complex 5-axis movements. The improved stability helped eliminate vibration marks in challenging operations such as slot cutting, while supporting consistent finish quality and longer tool life.

Leitz NiRo Collet Chuck Premium.

One application involved machining a sprocket using 5-axis milling at a tight angle. An application that had previously presented significant challenges was successfully completed with the required ﬁnish quality. “We’re able to get the product to customers in a short time frame at a better price point,” says Zacharopoulos.

part of the machining system. Designed for high-precision CNC machining, the NiRo Collet Chuck Premium features stainless-steel corrosion resistant construction, high clamping forces, slim geometry and precision concentricity. The system is designed to provide stable, reliable tool clamping for perfect ﬁnishes, long tool life and faster running speeds. “The team using the machine have all been happy,” says Zacharopoulos, “The system exceeds anything we have had before.” Talk to Leitz Tooling Systems about the right tooling and clamping solutions for your CNC application. 0800 578 665 sales@leitz.co.nz

Making the most of machinery The project highlights an important consideration for manufacturers investing in 5-axes CNC technology: the tooling interface is an integral

ZZZ OHLW] FR Q]

3UHFLVLRQ DW (YHU\ $QJOH /HLW] WRROLQJ VROXWLRQV IRU GHPDQGLQJ D[LV &1& PDFKLQLQJ 8QORFN WKH IXOO SRWHQWLDO RI D[LV &1& PDFKLQLQJ ZLWK /HLW] 2XU KLJK SHUIRUPDQFH WRROV DUH HQJLQHHUHG IRU SUHFLVLRQ VWDELOLW\ DQG UHOLDEOH UHVXOWV DFURVV ZRRG ZRRG GHULYHG PDWHULDOV SODVWLFV IRDPV DQG PRUH )URP VWDQGDUG WRROLQJ WR FXVWRP VROXWLRQV /HLW] GHOLYHUV WKH H[SHUWLVH WR WDFNOH FRPSOH[ PDFKLQLQJ ZLWK FRQILGHQFH

+HOL&XW &RS\ 6KDSLQJ *URRYLQJ 5HEDWLQJ &XWWHU 3HUIHFW HGJHV DQG VXUIDFHV ZLWK WHDU IUHH FXWWLQJ UHVXOWV 2SWLPLVHG FXWWLQQJ DQJOHV )RXU IROG WRRO OLIH WKDQNV WR WKH XVH RI UHYHUVLEOH FDUELGH NQLYHV 4XLFN DQG HDV\ NQLIH FKDQJHV )OH[LEOH DSSOLFDWLRQ RSWLRQV

&217$&7 86 VDOHV#OHLW] FR Q]

+HOL&XW 0RQREORFN

1L5R &ROOHW &KXFN 3UHPLXP

.DWDQD &LUFXODU 6DZEODGHV

3URFHVVLQJ IOH[LELOLW\ 6XLWDEOH IRU GULOOLQJ SRFNHWV WHQRQV DQG UHEDWHV )RU VROLG ZRRG ZRRG EDVHG PDWHULDOV SODVWLFV IRDPV 0RQROLWKLF GHVLJQ HQVXUHV WRRO VWDELOLW\ DQG PLQLPLVHV YLEUDWLRQ 3HUIHFW FXW TXDOLW\ QR UHZRUNLQJ UHTXLUHG

&RUURVLRQ UHVLVWDQW VWDLQOHVV VWHHO 4XLFN DQG HDV\ WRRO FKDQJHV UHGXFH GRZQWLPH 6OLP JHRPHWU\ DQG KLJK FODPSLQJ IRUFHV UHGXFH UXQRXW DQG LQFUHDVH FXW TXDOW\

3HUIHFW ILQLVK RQ YLVLEOH FXW HGJHV /HDGLQJ VDZEODGH WHFKQRORJ\ SURYLGHV VWUHQJWK $EOH WR SURFHVV PRVW PDWHULDOV WLPHV UHVKDUSHQDEOH

JOINERS Magazine September 2026 page 25

Windsor Industries Move to 5-axis CNC technology a natural progression When it comes to complex work in panel and solid wood the use of 5- axis CNC technology provides great reach and flexibility in achieving an exacting finished product with automated simplicity. An interesting company using this technology is Windsor Industries in Pahiatua. A leading supplier of premium caskets to the funeral industry they are regarded as one of the top three such manufacturers in NZ with a specific reputation for their high end Solid Timber Range. Bob Nordgren from JOINERS Magazine spoke with Production Manager Frazer Brayshaw about the influence of technology on the business. Windsor Production Manager Frazer Brayshaw with the new Titan 5-axis from Farnese.

APEX 5 AXIS CNC

TITAN 5 AXIS CNC

Discover precision and performance with the Farnese Apex CNC machine, featuring a 9kW router, versatile drilling, and automatic material handling for seamless efficiency. Elevate your production line today!

Experience unparalleled precision and versatility with the Titan 5-Axis CNC machine. Its advanced multi-axis capabilities streamline complex machining tasks, boosting productivity and efficiency for top-tier manufacturing.

Farnese Showroom now open! 10/38 Eaglehurst Rd, Ellerslie Need expert advice on our machinery? Get in touch with Farnese for all your questions and sales inquiries! We're here to help you ﬁnd the perfect solution for your business. www.farnese.co.nz

04-5268589

JOINERS J O OIINE NE ER RS Magazine Magaz azine Se September Sep ptem mberr 2026 202 26 page pag age 26

info@farnese.co.nz

“The use of technology has gone hand in hand with a culture of enablement that allows us to continually improve, react and respond to change whenever we need to.” says Frazer. “The casket business needs us to meet the changing tastes and demands of our clientele and also implement cost savings where possible to keep prices fair for the consumer.” The use of sophisticated machinery in the manufacture of caskets of varying materials and styles has been around for some time now. Windsor Industries has been in operation for thirty plus years and have used two previous three axis CNC machines from Proform CNC Ltd (now part of Farnese NZ). “Moving to a ﬁve axis machine was a natural progression for us and something I was working towards for a few years” explains Frazer “It was about maintaining our production efficiencies in a competitive industry but also allowing for continuous development of new designs,

materials and mouldings for the caskets to meet client’s wishes. It is our intention to remain leaders in innovating new and fresh designs. Windsor’s casket production has risen from 3600 caskets per annum three years ago to its current number of 5500 plus per annum today, all the while managing to maintain their staff numbers at a consistent level of about seventeen team members. Frazer attributes this to a continuous mindset for improvement and machinery investment such as their new five axis CNC machine. To gain the improvements the five axis technology offered, Windsor Industries moved to a Titan 1228 five axis flat bed CNC router from Farnese NZ. “This machine was the right size footprint and had the right improvements we needed in our factory.” Frazer comments. The Titan is a high quality CNC machining centre incorporating Italian technology with five controlled axis equipped with a matrix table adapted to

a variety of flexible working processes such as quick nesting and milling functions. It comes in multiple sizes to meet any work size requirements. In this case the table is 2800 by 1220mm to fit the factory space available. It has a powerful 6.5kW 40,000RPM spindle. A real feature is the custom linear tool changer with 25 tool changers. The programming is done from an Osai CNC Italian controller. The machine uses AlphaCam software and is only the third such five axis CNC machine in Australasia to be produced from this Farnese team. For a company of its size with just seventeen staff the Titan has upped their game considerably. “Along with a new interface this machine offers us considerable improvements in production and design” explains Frazer “It uses no more space than our old three axis machine but advantages us with the production efficiencies we were looking for.” Frazer adds “It was a smooth transition for us from what we had: good install and ongoing service from the Farnese

team but also from the helpful guys at Alphcam. I completed all of the CNC programming myself and Simon, who is aged sixty seven, and is our key person operating the Titan had no trouble acclimatizing to the brand new technology. Our casket production has risen along with the precise result with the engraving and dovetailing functions we use.” comments Frazer. “The Farnese Titan was a good choice for us in particular due to its pricing, and we got what we were looking for and couple that with our already seriously good service history and relationship with Farnese this was a no regrets purchase for us.”

For more information contact Frazer Brayshaw, Windsor Industries Limited 10 Wakeman St, Pahiatua frazer.brayshaw@ windsorindustries.co.nz or visit www.windsorindustries.co.nz

CRA CRAFTED R FTE T D FROM NEW ZE Z ZEALAND EALAND T TI MBER TIMBER

Solid timber construction, clean lines and matching timber handles complete the design of this modern yet classic casket.

DORSET | SOLID NATIVE TŌTARA JOINERS Magazine September 2026 page 27

The Accord 500 edge makes its possible to do solid timber joinery and flat panel edging at the same time.

Accord 500 edge the new frontier of integrated processing The main highlight of the SCM stand at Xylexpo 2026 in Italy was the Accord 500 edge, the latest innovation in SCM’s Accord range. The new CNC machining centre stands out as a complete and multifunctional solution that also integrates edge banding technology, meeting the most advanced production requirements both in solid wood processing and in the furniture industry. The Accord 500 is not only a 5-axis CNC machine for the solid timber joinery market but also can be equipped with advanced edge banding technology which sets a new benchmark in the cabinet making and joinery industry. The Accord 500 is a game changing investment for companies that not only do solid timber joinery including doors, windows and stairs but also cabinet making and shopfitting companies making curved panels that require edging, office furniture, laminated benchtops, desks, table tops, caravan and yacht interiors. The dual motor gantry structure enables high speed movement, which reduces machining times and gives a superior quality finish while delivering the highest performance. The machine has been engineered to minimize the overall footprint in your factory with its ProSpace bumper system while still meeting the highest safety standards. The automatic positioning of the pods and rails via rack and pinion means fast set up time and eliminates the possibility of set up errors. The machine can be equipped with fixed or rotating pods, special pods for jigs, vertical or horizontal claps and SCM’s special HE-PODs that lift the cut panel up so the edge banding can be performed on multiple parts that are cut from one panel. Pendulum machining means it's possible to do solid timber joinery and flat panel edging at the same time creating the highest flexibility. The innovative Multi Melter unit also gives you the flexibility of PUR or EVA glues.

JOINERS Magazine September 2026 page 28

Accord 500 edge H80C edge banding unit.

5-axis solid wood machining.

H80C compact edging A key strength of the Accord 500 is the H80C “Compact” edge banding unit, equipped with multiple magazines for tools, glue, edges and pressure elements, enabling fast and reliable automatic changes between different processing operations. The new Accord 500 edge is also equipped with the SCM Maestro software package, featuring the Maestro active interface, and with Maestro lab CAD/CAM programming software, making production process management simpler and more efficient. The solution is completed by Maestro lab edge, the new evolution of the CAD/CAM system dedicated to panel edge banding processes, which allows users to manage all edges and related application strategies, optimizing programming and machining operations. SCM have many options at their disposal and can configure a machine to suit your needs, for more go to www.scmgroup.com 

Accord 500 edge expand your possibilities The new Accord 500 edge is a compact CNC machining centre for drilling, routing and edge banding that puts a full factory’s capability into one machine. • Its H80C “Compact” edge banding unit delivers fast, automatic changeovers with multiple tool changers for tools, glues, edges and pressing elements. • Independent operating units boost productivity in tight spaces, maximising the working area and giving you exceptional ﬂexibility. • Advanced safety systems meet the highest standards, ensuring maximum protection and secure operation in all conditions.

What’s Under the Hood of your CAD/CAM Software? The joinery industry is constantly evolving, with new hardware, drawer systems, doors and panels being introduced to the market. Having these products available in your CAD/CAM software means you can specify them accurately and take them through to production without having to work around outdated information. At Joinery IT, we work closely with leading suppliers to bring the latest and most in-demand products into CABINET VISION. Throughout 2026, we have continued to expand the range of supplier packages available through the CV App Store, giving CABINET VISION users more choice and the ability to specify current products as they become available. New products for CABINET VISION 2026 Blum: REVEGO V3 pocket doors, PLICOBOX drawer systems, and Inward Entrance Doors. Drawers & Hardware: Advanced systems from Hafele (Matrix Box P Plus), Hettich (FGV Unilux), Stefano Orlati (Titus Riva DWD), and Enko Group.

Doors & Panels: Updated ranges from Polytec, Sage Doors, Panelform, and DEZIGNATEK. These packages are developed for the current CABINET VISION 2026 platform and are available through the CV App Store. Apps developed by Joinery IT for the current version of CABINET VISION are free to New Zealand customers with current and ongoing software SMA. Keeping CABINET VISION up to date is now easier. Updating your software has also become much simpler. HEXAGON’s Universal Updater provides a straightforward way to download, install and update CABINET VISION directly from your desktop.

Located in the Windows taskbar notification area, the Universal Updater puts the latest available updates just a couple of clicks away. Keeping your software current has never been easier. Is your PC giving CABINET VISION its best performance? We have recently seen a number of customer PCs default to Balanced power settings, accompanied by reports of noticeably slower software performance. For CABINET VISION users running Windows 11, it is worth checking that your PC is set to Best Performance. Go to: Start → Type “Power action settings” → Power Mode → Best Performance Windows also provides more

traditional power options through: Control Panel → Power Options → Performance. From there, you can select Change Plan Settings and adjust your preferred display and sleep settings. Small settings can make a noticeable difference when you're asking your PC to keep up with your design and production workflow. Keep your software — and your product library — current From the latest hardware and product packages to easier software updates, CABINET VISION 2026 is continuing to move towards a more connected and up-to-date design-to-manufacture workflow. What’s under the hood of your CAD/CAM software?

WHAT’S DRIVING YOUR DESIGN SOFTWARE

Power your production with the best brands under the hood! At Joinery IT we partner with suppliers, so that you can have the most up-to-date and in-demand hardware product ready for specification and production. Streamline your concept to manufacture process with a software that has the latest technology available.

Contact Joinery IT for information today.

Phil Smith | 021 201 4450 JOINERS Magazine September 2026 page 29 info@joineryit.co.nz | joineryit.co.nz

The Nanxing NCG3212 combines routing, drilling, grooving and machining into a single automated solution.

Considering 5-Axis? It may be worth looking at the alternatives There is no question that a true 5-axis CNC machining centre offers excellent flexibility and capability. Having supplied dozens of 5-axis CNC machines throughout New Zealand, Machines R Us understands very well where this technology ﬁts and the beneﬁts it can provide.

90+/90- tilting spindle for angled machining, automatic tool changing, aggregates pickup, external vacuum connections for jig connection, a thickness probe and a generous 550mm processing clearance.

However, for many cabinetmakers, joiners and door manufacturers, it is also worth considering whether a more cost-eﬀective alternative could handle the majority of their production requirements.

Priced from NZ$135,000* + GST installed, including training, the NCG3212 represents a very attractive entry point into more advanced CNC machining and can oﬀer a signiﬁcantly faster return on investment than higher-cost alternatives.

The Nanxing NCG3212 4-Axis CNC Machining Centre offers considerably more flexibility than a conventional 3-axis router, including an interpolated

For businesses considering a 5-axis machine, the key is to look closely at the work you actually produce and decide what level of capability is genuinely required.

JOINERS Magazine September 2026 page 30

Take a look at the video in the accompanying advertisement to see the NCG3212 in action. Its tilting spindle and high 550mm processing clearance demonstrate just how much flexibility the machine can oﬀer across a wide range of production applications. 

A full range of advanced 5-axis CNC solutions are available from Machines R Us, please refer to their website www. machinesrus.co.nz for more.

Priced from NZ$135,000* + GST installed, including training, the NCG3212 represents a very attractive entry point into more advanced CNC machining

*Price excludes delivery to site and connection to services. Terms and conditions apply.

IDEAL FOR Cabinet Manufacturers Joinery Shops Door Manufacturers

SMART MACHINERY | STRONGER FUTURE

Furniture Manufacturers

NCG3212 DOOR, WALL & CABINET PROCESSING CENTRE ONE MACHINE. MULTIPLE APPLICATIONS. Precision machining for doors, wall panels, cabinetry and furniture components.

BUILT FOR MODERN MANUFACTURING The Nanxing NCG3212 is a versatile CNC processing centre designed to machine cabinet components, internal doors,

MULTI-FUNCTION CNC PROCESSING CENTRE

INTELLIGENT SYNTEC CONTROL

CABINET, DOOR & WALL PANEL PRODUCTION

HIGH-SPEED ROUTING & DRILLING

HIGH-SPEED AUTOMATIC TOOL CHANGER

HEAVY DUTY INDUSTRIAL CONSTRUCTION

PRECISION SERVO MOTION SYSTEM

MAXIMUM PRODUCTIVITY

wardrobes, decorative wall panels and furniture parts with exceptional speed and precision. Combining routing, drilling, grooving and machining into a single automated

Reduce labour.

while maintaining outstanding quality. 90°+/- SPINDLE

BACKED BY MACHINES R US NEW ZEALAND SALES INSTALLATION OPERATOR TRAINING

TECHNICAL SUPPORT Local support. Long term commitment. We’re here to keep you running.

Produce more with fewer setups.

12-POSITION

EXTERNAL TOOL MAGAZINE

HIGH 550mm

TOOL CHANGER

FOR LARGE BLADES & AGGREGATES

PROCESSING HEIGHT

WATCH THE NCG3212 IN ACTION SCAN THE QR CODE BELOW

SPARE PARTS LOCAL SERVICE

Increase output. Improve consistency.

solution, the NCG3212 helps manufacturers increase productivity

DESIGNED FOR COMPLETE PANEL PROCESSING

Scan See the NCG3212 in action and discover how it can transform your production.

Machines R Us Ltd 13 Patiki Road, Avondale Auckland, New Zealand 09 820 9486 www.machinesrus.co.nz JOINERS Magazine September 2026 page 31

The custommanufactured skip is completely sealed and designed to integrate seamlessly with the pneumatic bin kit, creating a dust-free waste-handling solution. The extracted waste drops seamlessly into the skip, fully automating disposal and removing the physical strain of manual bag changes.

Gill Joinery needed to scale up their extraction system to match increasing production requirements.

Powering up production at Gill Joinery the 45kW RAC5000-3C Solution Let’s be real—in a busy joinery shop, keeping the air clear is absolutely essential for everyone's health and well-being. When a premier high-volume kitchen manufacturer like Gill Joinery in Christchurch scales up production, their infrastructure needs to scale right alongside them. Relying on underpowered or decentralised extractors just doesn't cut it when pushing maximum volume. We were brought in to overhaul their dust management and keep their shop running at peak eﬃciency. We delivered exactly that with a heavy-duty 45kW RAC5000-3C Dust Extraction System.

Engineered for Heavy-Duty Extraction • 2x CNC Machines: High-velocity capture of fine routing and cutting particulate directly at the source, stopping microscopic dust before it has a chance to circulate through the wider shop. • 2x Edgebanders: Instant, powerful extraction of heavy trimmings and fine dust to keep walkways clear, improve operator safety, and ensure ﬁnishes remain ﬂawless. Custom-Manufactured Waste Management Extraction is only half the battle; waste disposal is where many shops lose valuable man-hours. Emptying traditional plastic dust

JOINERS Magazine September 2026 page 32

bags is a messy, frustrating, and time-consuming chore. It often kicks up the very dust you were trying to eliminate, along with the physical strain of hauling heavy bags by hand. We completely eliminated this problem by integrating a pneumatic bin kit. Because standard oﬀ-theshelf solutions don't always meet the speciﬁc needs of a large-scale manufacturer, we also custommanufactured the skip. This custom-manufactured skip is completely sealed and designed to integrate seamlessly with the pneumatic bin kit, creating a dustfree waste-handling solution. The extracted waste drops seamlessly into the skip, fully automating disposal and removing the physical strain of manual bag changes.

The Bottom Line For modern joinery shops, investing in proper extraction is about more than just ticking compliance boxes or speeding up the production line. It is about taking care of your people and making the workshop a better, safer place. By radically improving daily air quality and removing the strain of manual waste handling, this new, integrated setup ensures the team at Gill Joinery can focus comfortably on what they do best: producing premium cabinetry.

Phone: 0800 140 040

What’s new and What’s next at Archant From Sefton Clare Sales Director at Archant It’s been a busy few months at Archant, with new products on the way, continued investment in how we support our customers, and plenty happening on both sides of the Tasman.

industry and see what’s happening across the Australian market. Design Show heads to Melbourne in 2027, and we’d love to see more of our New Zealand customers there.

Coming soon: SilkTouch and WoodTouch Melamine We’re getting ready to introduce an entirely new melamine range to the Archant collection. SilkTouch and WoodTouch are coming soon, bringing new tactile ﬁnishes and design possibilities for joiners, designers and speciﬁers. We’re keeping the details under wraps for now, but you’ll be seeing plenty more from us shortly…

Helping your showroom We’re also helping trade customers make more of their showroom spaces, with support for both new displays and retroﬁts incorporating Archant benchtops, sinks, handles, Wovenpanel and more. Ask your Archant representative about our showroom retrofit and upgrade options.

Living Brass Also new to the Archant handle collection is Living Brass, a ﬁnish designed to develop a natural patina over time. Rather than remaining unchanged, the surface evolves with use, creating a ﬁnish unique to the space. It’s another example of where we’re seeing materiality and tactile finishes play a bigger role in kitchen and interior design. A strong showing in Sydney The Archant team recently returned from Design Show Australia in Sydney, where we welcomed record numbers to the Archant stand, including plenty of familiar faces from New Zealand. It was a great opportunity to share what we’ve been working on, connect with the wider design

2027 Handle Catalogue is here Our new printed 2027 Handle Catalogue is now available, bringing our latest handle collections together in one place. Request your copy from your Archant representative or via 0800 ARCHANT. Visiting Hawke’s Bay? Our new head oﬃce and operations facility is now up and running. If you’re visiting the region, come and see us. We’d be pleased to show you around and give you a look behind the scenes at Archant. Stay connected with Archant Log in at archant.co.nz to view trade pricing, check stock and track your orders, or join us on WhatsApp for product updates and one-oﬀ specials. 

JOINERS Magazine September 2026 page 33

Opening doors Swing, lift, pivot, slide - our leading door hardware suppliers have specialist hardware for every requirement and to suit every project specification. We cover the range from the traditional hinged to the modern pocket system and the hardware that makes them work.

Hafele p .37

FIT p. 35

Enko p.41

Titus p.38

Blum p.43

JOINERS Magazine September 2026 page 34

Gravity IN

Gravity OUT

Gravity the above bench pocket door solution With exceptional design flexibility and one of the widest parameter ranges in its category, the new Gravity pocket door from Salice of Italy has recently been launched by FIT. Configurable! One of Gravity’s innovations is that YOU choose how it assists with your application. Select Gravity IN for self soft close functionality. Select Gravity OUT for soft push to open with manual close. Easier to Spec. Easier to Install Gravity is supplied in kit form, ready for delivery with minimal pre-assembly adjustment required. It features quick-coupling hinges for efficient assembly. FIT have made the Salice online configurator available via their website; it steps you through your project to create the perfect custom Gravity kit. Not keen on working out the spec yourself? No problem! There’s also an enquiry form to send to FIT’s superb customer service team, who will work up the details for you. FIT’s special Gravity website landing page supports every stage – from discussing the benefits of a pocket door with your clients, through design spec to installation with detailed instructions and video tutorials. Easier to Adjust and Disassemble With Gravity, all adjustments are accessible from the front of the cabinet; there’s no need to remove the door. If you do need to remove

the door, you can do so from the front, even when the pocket is narrow. Wide Parameters Gravity suits doors from 1100mm to 3000mm high and from 300mm to 900mm wide. With these extensive parameters, Gravity is perfect for both full height and on bench pantries, appliance garages, coffee stations and home bars. Laundry appliance and linen cupboards, study and work from home spaces, secure garage workbench storage and space-eﬃcient oﬃce storage: all applications for which Gravity is ideally suited. European Design & Quality Designed and made in Italy, Gravity is an incredibly versatile mechanism that brings together

smart functionality and refined aesthetics, creating a clean, unobtrusive opening solution that keeps doors out of the way when the space is in use. Gravity is the ideal choice when your client wants cabinetry to open fully, function beautifully, and disappear seamlessly into the overall design.

Gravity Tech Specs • • • • • • •

For more info about Salice’s Gravity pocket door, check the Door Hardware section of FIT’s website, contact your Fit rep, phone 09 431 0025 or email info@fit-nz.co.nz to discuss your requirements.

• •

Suits doors from 16mm to 30mm thick Suits door heights from 1100mm to 3000mm high Suits doors from 300mm to 900mm wide Maximum weight per door: 40kg (distributed evenly) Internal pocket width required 55mm Tested and guaranteed for 80,000 cycles Door protrusion is determined by ratio between door height, door width and cabinet depth; always verify correct protrusion using the online conﬁgurator Vertical adjustment +4mm/-1mm Front adjustment +/-4mm

JOINERS Magazine September 2026 page 35

AVAILABLE NOW!

Free Slim The slim one with U-Power. Free Slim by Häfele redefines the standard for flap fittings. Häfele’s uniquely developed horseshoe-shaped U-spring offers an exceptionally slim installation width along with excellent processing and installation flexibility. Experience even broader possibilities in furniture design with Häfele Free Slim.

One product, many ﬂap sizes, two installation methods.

Black / Anthracite / Light Grey / White

Surface mounted

Free Slim can be installed in two ways: Either screwed onto the inside of the cabinet or integrated into the carcase side panel from the outside. The fitting is unhanded and can be used on both sides, making it extremely versatile and simple to install. With two front fixing options Screw on or Spreading dowel and in either Soft Closing or Push to Open, this ensures the widest range of applications can be covered by the smallest number of fittings and uncomplicated ordering.

Recess mounted

Only one ﬁtting for the entire application range up to 12 kg ﬂap weights with reference cabinet height of 400 mm. To learn more contact your local Häfele Representative. sales@hafele.co.nz | www.hafele.co.nz JOINERS Magazine September 2026 page 36

The Concealed Hinge System. It all hinges on excellence. TECTUS TECTUS takes concealed door hardware to its most minimal expression. It’s completely concealed design, with a clean, ﬂush and linear appearance, allows the door to sit seamlessly within almost any architectural material or ﬁnish. Behind the uninterrupted surface, advanced technology delivers smooth, precise, and lasting performance without the need for protruding architraves.

• Completely concealed hinge system • For flush-fitting architectural hinge solutions • Load capacity of 60 to 300 kg • Comfortable 3D adjustment • Opening angle of 180° • For unrebated and rebated flush doors • For timber, steel and aluminium frames • With maintenance-free slide bearing technology • Available in a variety of finishes • Options for recessed frame facings and doors with soft cladding • Options for entrance doors, ﬁre doors and energy transfer

ANSELMI For residential applications, ANSELMI offers a versatile range of concealed hinges designed for interior doors, weighing up to 80 kg. For those manufacturers searching for production economies of scale and easy installation of their products on site, Anselmi offers versions with reduced frame cup to allow the installation of frame architrave without any additional operation on site, door reversibility and easy switching between different hinge models increasing the load capacity whilst keeping the same milling geometry.

• Completely concealed hinge system for interior doors • Cost effective solution for residential door applications • Load capacity from 40 to 80 kg • Opening angle of 180° • For unrebated and rebated flush doors • For timber and aluminium frames • Available in a variety of finishes

To learn more contact your local Häfele Representative. projects@hafele.co.nz www.hafele.co.nz JOINERS Magazine September 2026 page 37

The Set200S Slidix sliding door - smooth movement, controlled damping.

The P700 Hideaway pocket door retreats neatly into an adjacent cavity.

Accessible & aesthetic As homeowners’ priorities begin to shift, one of the first questions we need to ask ourselves is whether a walk-in wardrobe really oﬀers more luxury and storage than a more space-saving built-in wardrobe. When space is no object, the case for a palatial walk-in is obvious, but in smaller floorplans, a well organised built-in can be the preferred option. If your walk-in wardrobe amounts to a particularly deep cupboard, a built-in wardrobe with elegant sliding doors will almost always be a more practical solution. And with the products now available to outfit those wardrobes, a thoughtfully designed built-in wardrobe can easily rival the luxury of a high-end walk-in. The Titus Set200S Slidix Sliding Door System is an excellent choice for a built-in system with high-end appeal, delivering soft open and soft close sliding doors and two-way centre door damping to ensure no matter which way they’re pushed, the doors always glide seamlessly back into position. Backed by the Titus Slidix damping technology, Set200S Slidix combines smooth movement with controlled damping for a more reﬁned user experience. The soft open and soft close action helps prevent doors from slamming at either end of their travel, while the two-way centre door damping provides additional control in multi-door configurations. The result is quieter, more comfortable operation that contributes to the premium feel expected from contemporary wardrobe cabinetry. Sliding doors also provide an important spatial advantage. Because they operate within the

footprint of the wardrobe rather than swinging into the room, they can make better use of bedrooms where circulation space is limited. This allows furniture and other interior elements to be positioned closer to the wardrobe without restricting access. Combined with large, clean door panels, the system can also create a sophisticated architectural feature that integrates beautifully into a minimalist interior. Concealed Design for Smart Spaces As homes and apartments continue to evolve toward more compact, eﬃcient living, the European-style laundry has emerged as one of the smartest space-saving solutions in contemporary interior design. Concealed neatly within cabinetry or integrated into kitchens, bathrooms, hallways or butler pantries, these compact laundries maximise functionality without compromising on aesthetics. Laundries don’t need to be large to be functional and Europeanstyle laundries are proof-positive that space-saving design can be a great way to maximise smaller ﬂoorplans. At the centre of this design movement is intelligent door hardware. The Titus P700 Hideaway pocket door system provides an elegant solution where the objective

JOINERS Magazine September 2026 page 38

the system particularly suited to compact laundries, wardrobes and other concealed utility spaces where every centimetre of usable floor area matters. Soft-close operation and added adjustment features further enhances the experience, bringing controlled, reﬁned movement to doors that may be opened and closed several times throughout the day. Titus Set F450 adjustable BiFold.

is to completely open up the cabinetry during use. Rather than leaving doors projecting into the surrounding space, the doors retreat neatly into an adjacent cabinet cavity. Once concealed, the doors are kept out of the working zone, creating convenient access to appliances, shelving and storage. When the laundry is no longer required, the doors can be returned to conceal the entire workspace, transforming a functional utility zone into streamlined cabinetry. For applications where a pocket cavity isn’t practical, the Titus Set F450 adjustable BiFold system provides another spaceeﬃcient alternative. Its folding action reduces the amount of clearance required in front of the cabinetry compared with conventional hinged doors, while still allowing the opening to be accessed comfortably. This makes

Together, sliding, pocket and folding door systems give designers greater freedom to rethink how traditionally functional areas fit within the home. Instead of dedicating valuable floor area to door swings and circulation zones, cabinetry can become more adaptable, opening fully when access is required and disappearing elegantly back into the surrounding interior when it isn’t. As contemporary living continues to favour minimalism and efficiency, thoughtful design can dramatically improve the functionality and liveability o f m o d e r n h o m e s . Wi t h sophisticated, space-saving and beautifully integrated door solutions, accessibility no longer needs to come at the expense of aesthetics. 

Perfectly Paired. Built to Perform.

T-type Hinge

Slimline+ Drawer

Contact Stefano Orlati www.stefano-orlati.co.nz stefano-orlati@titusplus.com JOINERS J JO JOI OIIN O NE NER ERS M ER Ma Magazine ag gaz ga azzin a iine ne S ne September Se Sep ep e ptem tte em e ember mb be ber er 2026 er 20 2 02 26 6 page pag pa p ag a ge 39 39

JOINERS Magazine September 2026 page 40

JOINERS Magazine September 2026 page 41

REVEGO walk-in version

Don’t just open doors open possibilities with REVEGO

NEW

REVEGO on bench

The pocket door system by Blum is already loved and widely used throughout the New Zealand market, praised for its quality, longevity, and ease of planning, ordering, and installing. REVEGO is best known as the product that opens up spaces when needed, and closes them off out of sight when they’re not - but did you know the latest version can also be used as a door? REVEGO version 3 was released to the local market in February with the option to be used as a door for spaces such as walk-in wardrobes, sculleries, laundries and more! The hardware has been optimised for heights up to 2980mm, allowing you to use REVEGO as a full-height, floor-to-ceiling door in your projects. What else has changed? Installing REVEGO is faster, with up to 52% fewer screws, simpler thanks to the individual installation of REVEGO duo doors, and lighter, with reduced product weight and optimised packaging, helping joiners move through installs with greater speed. The product refinements and the expanded range help joiners save time, reduce complexity, and achieve an exceptional finish to any space. REVEGO planning and ordering can be done using Blum’s online Product Configurator in E-SERVICES and through Blum Shop. Touch base with your Blum Account Manager or visit www.blum. com/revego to find out more about the exciting enhancements made to REVEGO!

Have you installed an on-bench REVEGO? The latest enhancement to Blum's REVEGO pocket system is the ability to create half-height doors. Perfect for use over a benchtop or in niche applications like entertainment units, REVEGO can be used for doors as small as 1130 mm in height in both uno and duo applications. The refinement to REVEGO doesn’t just stop at design, though, with enhancements made to reduce the packaging weight, face level height adjustments for ergonomic installation, and a significant reduction in screws and therefore overall drilling time - REVEGO has been refined with the joiner in mind, based on valuable industry feedback. Log in to Product Configurator through Blum’s E-SERVICES to plan and order your half-height REVEGO and discover what all the fuss is about. Visit e-services.blum.com

JOINERS Magazine September 2026 page 42

Inward opening door Multi-Functional

PREMIUM WOOD PROTECTION

Cabinet doors as entrances? Anything is possible. Blum CLIP top BLUMOTION hinges offer an exciting design solution for every space! The small but mighty Blum hinge has had a discovery: same hinge - new application. Thanks to the high quality, rigorous testing and load-bearing capacity of Blum hinges, you can now install a fullheight entryway door with Blum CLIP top BLUMOTION hinges. Using standard fittings, the inward opening door is simple to plan, fit, and adjust with the usual ease. Swap the positions of the inset hinge and mounting plate to create a hidden door, with additional shelf storage also concealed behind the closed cabinet

door. Inset Blum hinges are available in both steel and onyx black for designs that blend in or stand out. And because this innovative application uses the standard Blum hinges you’re already familiar with, you can ensure top-quality motion with hinges tested to 200,000 opening and closing cycles.

Quick Drying  Highly Durable & Wear Resistant  Natural Oils & Wax Formulation  Water & Stain Repellent  Easy Maintenance & Spot Repair

Simply. Coat. Better.

Add some inset CLIP top BLUMOTION hinges to your next order through shop.blum.com to discover the innovative inward opening door solution or visit blum.com to find out more. CHRISTCHURCH 32 Coleridge Street, Sydenham AUCKLAND 155 Neilson Street, Onehunga

Ph 0800 SEEARCO

(733 272) JOINERS Magazine September 2026 page 43

www.seearco.co.nz

)ROG 3XVK 'RQH

3/,&2%2;

$ QHZ FRQFHSW %OXP KDYH GHYHORSHG D ER[ V\VWHP VSHFLILFDOO\ IRU OLYLQJ VSDFHV DQG FRPH XS ZLWK VRPHWKLQJ VSHFLDO 3/,&2%2; LPSUHVVHV ZLWK DQ LQQRYDWLYH IROGLQJ EDVH WKDW HQDEOHV VSDFH HIILFLHQW SDFNDJLQJ DQG HDV\ PDQXIDFWXULQJ 7UXH WR WKH WDJOLQH ´)ROG 3XVK 'RQH µ 3/,&2%2; FDQ EH DVVHPEOHG LQ DQ LQVWDQW ZLWKRXW WRROV

JOINERS Magazine September 2026 page 44

2QH WZR WKUHH 7KDQNV WR LWV LQQRYDWLYH IROGLQJ EDVH 3/,&2%2; FDQ EH DVVHPEOHG TXLFNO\ ZLWKRXW WRROV ² ZLWK QR FRPSURPLVH RQ VWDELOLW\ RU TXDOLW\ RI PRWLRQ 7KH IROGLQJ EDVH FDQ DOVR EH FXW WR VL]H SURYLGLQJ RSWLPDO IOH[LELOLW\ IRU IXUQLWXUH GHVLJQ DQG SODQQLQJ

)ROG

3XVK

'RQH

-XVW IROG XS WKH EDFN DQG WKH GUDZHU

7R DVVHPEOH WKH ER[ VLPSO\ SXVK WKH

7KH GUDZHU ER[ FDQ EH DVVHPEOHG LQ

EDVH LQFOXGLQJ EDFN LV UHDG\ IRU DVVHPEO\

IROGLQJ EDVH LQWR WKH GUDZHU VLGHV DQG

MXVW D IHZ VWHSV ,W FRXOGQ W EH HDVLHU

7KH PP WKLFN IROGLQJ EDVH KDV RQH

VHFXUH ZLWK WKH ORFNLQJ OHYHUV 1R WRROV

IROG

QHHGHG

%HQHÀ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² 3/,&2%2; GUDZHUV ERDVW DQ LPSUHVVLYH NJ ORDG FDSDFLW\ 7KH UREXVW PP +3) IROGLQJ EDVH GHOLYHUV D VWXUG\ DQG UHOLDEOH FRQVWUXFWLRQ ZLWKRXW H[FHVVLYH ZHLJKW

(DVLO\ RUGHU 3/,&2%2; WKURXJK %OXP 6KRS IRU D VHDPOHVV SXUFKDVLQJ H[SHULHQFH VKRS EOXP FRP

,QWHUHVWHG LQ MRLQLQJ RXU SLORW SURJUDP" *HW LQ WRXFK ZLWK \RXU DFFRXQW PDQDJHU IRU PRUH LQIRUPDWLRQ JOINERS Magazine September 2026 page 45

"I honestly can't think of how we could improve on what the KDT is delivering," says Duncan. "There's no glue line, the trimming quality is excellent and the corner rounding is perfect."

Duncan Waterson & Pablo Vila - life in the workshop is easier with a stress free edgebander.

Making the impossible possible For Duncan and Nadine

Waterson, the most rewarding projects are often the most challenging. Turning ambitious storage ideas into reality is what the talented Waikato Wardrobes team do best. The couple entered the industry six years ago after careers in the FMCG sector, where they learned the value of systems, workﬂow and efficiency. Duncan also brought practical manufacturing and construction experience: he’s a builder by trade. The combination of these skills have proved valuable in running a specialist wardrobe manufacturing business. "We specialise in wardrobes. It's all we do," says Duncan. "We're not a kitchen manufacturer that also does wardrobes on the side. Because wardrobes are our sole focus, we really understand what can be achieved." When Duncan and Nadine took over the business, they inherited a Felder panel saw and an older European edgebander that relied on glue cartridges. Since

then, Waikato Wardrobes has doubled its turnover without increasing staff numbers, helped by investment in a KDT 6-sided CNC and KDT laser edgebander, supplied by Jacks. "For wardrobes we need access to all six sides of a component," says Duncan. "A traditional nesting CNC wasn't the right fit because it can only access one face. With the KDT we can drill and rout all six sides, allowing us to prepare parts for hardware, fittings and assembly in a single process." The impact has been significant. "We had an employee who was an absolute genius. He could look at a complex wardrobe plan and manually produce it. Today the 6-sided CNC does that work automatically, so anyone in the workshop can do the same job. All they need to do is scan the barcode and place the part on the machine." While the productivity gains are obvious, Duncan says accuracy has been the greatest benefit. "We used to make final alterations to components during installation. Now parts arrive on-site ready to go and everything fits together perfectly."

JOINERS Magazine September 2026 page 46

The KDT laser edgebander has delivered equally impressive improvements. "It’s been an absolute game changer," says Duncan. The previous machine was notoriously difficult to run. "Only Pablo, our Production Manager, could reliably operate it. You'd look at it the wrong way and it wouldn't work," he laughs. By comparison, the KDT is simple enough for the whole team to use. "As long as you can feed parts in straight and don't run out of tape, you're good to go." According to Pablo, features such as the pneumatic pin and panel thickness protection system make it difficult to make mistakes, while the quality of the finished product has exceeded expectations. "I honestly can't think of how we could improve on what the KDT is delivering," says Duncan. "There's no glue line, the trimming quality is excellent and the corner rounding is perfect." The benefits extend beyond quality. The old machine often required one or two hours of manual finishing work every day, glue changes complicated production scheduling and maintenance was time consuming.

"Now we simply change the tape roll and keep working. There's no glue to clean off rollers or tooling, and we've standardised our tape thickness so we don't need to adjust trimmer settings." While laser edging tape comes at a premium, Duncan says the labour savings, reduced maintenance and improved consistency more than justify the investment. Beyond the improvements in efficiency, quality and consistency, Duncan says the KDT edgebander has transformed daily life in the workshop. "The old machine was frustrating to use. It created stress and slowed people down," he says. "The new technology has been a real morale boost." For a business built around making the impossible possible, investing in the right machinery hasn't changed what Waikato Wardrobes does. It has simply given the team the tools to do it faster, more accurately and with greater confidence than ever before. 

NEST EDGE CUT

INDUSTRIAL PERFORMANCE EXCEPTIONAL VALUE

A COMPLETE KDT PACKAGE FOR NZ MANUFACTURERS.

KN-2409DL

KE-268JSA

KS-132C

Nesting CNC

Edgebander

Panel Saw

COMPLETE PACKAGE FROM

$140,000+GST DELIVERED · INSTALLED · COMMISSIONED*

*Auckland or Christchurch. Additional costs apply outside of metro AKL or CHCH. Conditions apply.

REDEFINING VALUE FOR KIWI MANUFACTURERS Machines that mean business 0800 522 577 | www.jacks.co.nz JOINERS Magazine September 2026 page 47

TheHub Making it easier to do business with NZ Panels Group NZ Panels Group has launched TheHub, a new online ordering platform designed to give customers a faster and easier way to manage their everyday ordering needs. Available 24/7, TheHub gives customers greater visibility and control, whether they’re placing an order, checking previous purchases, ﬁnding an invoice or simply keeping an eye on current stock availability. “This is an exciting step forward for NZ Panels Group and another way we’re making it easier for our customers to do business with us,” says Group Marketing Manager, Paul Lerios.

New Zealand Panels head oﬃce at 15 Kerwyn Ave, East Tamaki, Auckland.

“We wanted TheHub to be genuinely useful in the day-today running of our customers’ businesses. It’s simple and intuitive to use, gives customers access to the information they need when they need it, and importantly, allows them to place and manage orders at a time that suits them. The feedback we’ve received so far has been really positive.” Through TheHub, customers can: • Search current and historical orders • View and reprint invoices • Place orders online 24/7 across the NZ Panels Group product range • Save favourite products for faster repeat ordering • Keep up to date with weekly stock updates, new products, deletions and runouts TheHub brings these everyday tasks together in one convenient place, giving customers another simple way to work with NZ Panels Group.

TheHub allows for easy navigation of the entire NZ Panels stock range.

Frequently ordered products can be tagged as favourites making re-orders quicker and easier.



JOINERS Magazine September 2026 page 48

Helping create inspired New Zealand interiors. Thermoform Doors/Panels

Mosman Interiors

Decorative Panels

Hayley O’Connor, Collab Interiors

Sinks and Taps

Mercer Showroom, Auckland

Benchtop Surfaces

Cleine Design, Mike Greer Homes

NZ Panels Group is the country’s leading manufacturer and distributor of interior products with a range that covers pressed decor panels, benchtop surfaces, sinks and taps, commercial washroom products and particleboard flooring. Discover more at nzpanels.co.nz

JOINERS Magazine September 2026 page 49

Supreme Award Winner 2026

Executed to perfection Gin Bar wins Supreme Award for SB Joinery This year’s winner is a spectacular Gin Bar from Scott Beales and his team at SB Joinery working out of their 500m2 factory in Pahiatua just south of Palmerston North. This project caught the eye of the judges who described it as “ very clearly executed to an excellent standard from floor to ceilings. The curves, attention to detail, and use of Sapele timber added to the understated luxury of the final result and truly showed a high level of skill. A true once in a career amazing project executed to perfection.” This project also won the Best Specialty Bar, Counter or Fitment Category. The client wanted an elegant and timeless fit out that feels like it has always been there. As you enter you are immediately faced with the curve of the stunning full height cabinetry, which draws you into and creates a sense of comfort and enclosure. This curved timber cabinetry introduces a sense of softness and fluidity that transforms the space from purely functional to sculptural. The use of Sapele timber enriched with stain and a high-quality clear finish adds to the sense of permanence and weight. The

joinery was crafted with precision, and its curves add an understated luxury to the space. The entire space was conceived and executed as a complete piece of bespoke joinery. The layout of the tasting room bar references the original 1904 reception area for the dental clinic which along with a private residence for the surgeon, was the original purpose of the building. The joinery design and paneling and install doors pay homage to the design and detailing found in the

JOINERS Magazine September 2026 page 50

original drawings by the buildings architects Crichton & McKay. Every surface within the room was carefully considered, resulting in a cohesive and immersive timber gin bar experience.

Materials Solid Sapele, Sapele veneer, Black Melteca, Beveled mirrors, Antique mirror, Black linoleum, Meranti ply. Stained with high-gloss polyurethane

The bar is constructed from solid Sapele and matching veneer, finished in a high-gloss stain and durable polyurethane topcoat. The richness of the timber is enhanced by the reflective finish, creating depth and warmth throughout the space. Key features include sweeping curved doors, custom wall paneling, and a circular ceiling timber frame incorporating an antique mirror insert. The ceiling detail in particular required extensive planning and precision, forming a striking focal point

Most of the componentry was handcrafted without the use of CNC.

Scott and Jacqui Beales celebrating their win at the Master Joiners Awards dinner in Queenstown.

within the room. The project demanded a signiﬁcant investment of time and craftsmanship, with meticulous attention given to every element. Fine details such as the tiny slatted mirror features, a linoleum bar top insert, and an integrated stainless steel sink all contribute to the layered ﬁnish of the space. With exception of one the ‘pizza-shaped' ceiling segment, which was outsourced for machining, all joinery components were handcrafted in-house without the use of CNC technology.

This approach reflects the level of skill, patience, and dedication involved in delivering the final result. The completed gin bar showcases traditional craftsmanship, thoughtful design, and a seamless integration of materials - a space that is both functional and visually striking.

For further information contact Scott Beales at SB Joinery, 2 Albert St, Pahiatua, phone 027 979 0368 or email scott.sbjoinery@gmail.com

SUPREME AWARD Sponsor

The Supreme Award recognises the highest overall achievement across timber categories. This award is presented to the highest-scoring Timber Category entry.

JOINERS Magazine September 2026 page 51

Premier Award Winner 2026

Jason Deans from Advanced Joinery accepts the award from Blum Managing Director Mike Hawkins.

JOINERS Magazine September 2026 page 52

Timber & Tussock

Showstopper The Premier Award this year comes from joinery and cabinetmaking firm Advanced Joinery 2024 Ltd based in Christchurch. This truly impressive kitchen has it all - best summed up by the judge’s comments. “Wow! This kitchen has great presence with a beautiful combination of curves and angles difficult to achieve in a same project and a transition from stone to timber seamlessly achieved through the use of a solid round block bringing the elements together. While the beautiful cathedral ceilings added to the complexity of the project, the oak veneer panelling to the ceiling and accuracy in alignment of the grain and vertical end-to-end matching turned this kitchen into a showstopper.” This project involved delivering a highly specified kitchen within a space defined by a 5.5 metre cathedral ceiling. The challenge lay in maintaining dimensional accuracy, and veneer consistency across significant vertical spans, where even minor inconsistencies would be amplified. Manufactured in European Oak mismatched planked timber veneer on 18mm MR moisture resistant MUF. Base units transitioned into full-height panel work, with matching panels extending upward to form a unified back wall. Veneer was laid vertically with sheets carefully selected by hand to ensure continuity of grain. A central insert in brushed black aluminium, was integrated into the Oak veneer joinery to reach the full 5.5m cathedral junction. Given the high-spec nature of the build, tolerances were exacting. Drawer reveals, vertical alignment, and service integration were resolved at shop drawing stage to eliminate on-site adjustment. Under bench drawers featured Blum Legrabox soft close hardware and overhead units were fitted with Blum Servo Drive HK flap systems to ensure smooth operation and functionality at height.

This project also won the Best Kitchen Over $50,000 category.

MATERIALS 18mm MR moisture resistant MUF Melteca Storm Cabinetry with 1mm Zeroline laser edge tape. European Oak mismatched planked timber veneer on 18mm MUF, edged with matching 1mm edge tape. European Oak solid timber elements. Finished in 10% two pack clear with selected stain colour. Brushed aluminium sheets 0.6mm. Fenix 18mm/30mm HPL soft matt finish with matching 1mm Zero-line laser edge tape. HARDWARE Routed timber finger pulls. Recessed finger pulls. Selected top cabinet doors finger pulled from below. Vanity fronts finger pulled from below. Selected doors push to open. Blum soft closing hinges. Blum Legrabox Orion Grey soft closing drawer system. Blum Grey non-slip mats to all kitchen drawers. Blum Ambialine drawer accessories. Blum Servo drive HK flap stays. Kitchen rubbish bins with Servo drive. Steel framework for kitchen island. Custom timber glass racks. Black powder coated aluminium framed fronts with tinted glass. Wall panels with concealed fixings. Kitchen Island: Atlantic Stone Granite, 20mm thickness mitred to 80mm to conceal the steel framework, with square, polished and arised seen edges. Hafele Blanco Naya 8 black sink. Kitchen Pantry and Splashbacks to the back wall: Dekton Kelya Natural 12mm thickness with square, polished, arised and seen edges.

A defining feature is the island’s curved form. The radius was achieved by moulding flexible plywood over a purpose-built former, ensuring a consistent structural curve. Once stabilised, the European oak veneer was applied post-forming, with sheets sequenced to allow the grain to flow uninterrupted across the radius and into adjoining panels. Precise sheet selection ensured perfect grain continuity without visible junction breaks. Every element demonstrates careful material management and joinery expertise creating a technically refined kitchen the clients can rely on and enjoy for many years to come.

For further information call Managing Director Darren Dudson at Advanced Joinery 2024 Ltd, 22 Avenger Crescent, Wigram, Christchurch, Ph 03 348 7700 or email Darren@ advancedjoinery.co.nz

The Premier Award recognises the top cabinetry entry from across all kitchen and cabinetry categories. This award is presented to the highest-scoring Cabinetry Category entry.

PREMIER AWARD Sponsor

JOINERS Magazine September 2026 page 53

Sinks & tops options & guidelines Aesthetic, functional and priced to market, benchtop and sink selection covers a multitude of materials, styles and price points. Two local suppliers show some of their latest oﬀerings along with providing a little advice and simple guidelines to help your selection process.

Archant p.57

Hafele p.55

Archant p.56

JOINERS Magazine September 2026 page 54

COMING SOON

A New Chapter in Kitchen Sink Choice A new collection of Häfele sinks is coming this October, bringing together three distinct ranges designed to offer greater choice across a variety of kitchen projects. The collection includes a wide variety of styles and conﬁgurations to suit different kitchen requirements. Designed with everyday use in mind, the new ranges combine practical functionality, reliable performance and considered design, with a balance of quality and exceptional value without compromise. From straightforward everyday installations to more customised kitchen projects, the collection has been selected with the practical needs of customers in mind, offering greater ﬂexibility when specifying the right sink for the job.

28 OPTIONS AVAILABLE

More Colour. More Possibilities. White

Soft White

Volcano Grey

Rock Grey

Häfele has expanded its stocked Blanco Subline range, offering an even broader selection of colours from local stock. From warm, earthy hues to cool, contemporary tones, ﬁnd the perfect ﬁnish for your space. With greater choice and faster availability, designers and homeowners can achieve the look they want while keeping projects moving from concept to completion. Explore the range in our new brochure.

BLANCO SILGRANIT S KS. SINKS. A impressively An i i l resilient, ili t easycare surface. f

Tartufo

Anthracite

Coffee

Black

To learn more contact your local Häfele Representative. sales@hafele.co.nz | www.hafele.co.nz JOINERS Magazine September 2026 page 55

Sink Speciﬁcation - 6 things that matter A sink might be a relatively small part of a kitchen specification, but getting it right involves more than choosing a size and finish. Configuration, installation method and material all matter, but so do practical considerations such as stock availability, lead times, freight and what happens when project requirements change.

CERAMIC Made in England, for classic and contemporary kitchens.

ECOGRANIT Made in Germany. Durable, heatresistant and available in a range of colours.

With more than 8,000 sinks held in New Zealand across 80+ configurations, New Zealand’s owned and operated Archant works with joiners, fabricators and designers across the country. Here, the team shares six things worth considering when specifying a sink for your next project. 1. Check local availability For projects working to fixed installation dates, knowing what is actually available matters. A sink specified months earlier can quickly become a problem if it comes with a lengthy lead time when the project is ready to install. Archant holds more than 8,000 sinks in New Zealand, across a wide range of sizes, configurations, finishes and specialist options. Local stock gives joiners and fabricators greater confidence that the sink they need will be available when the job is ready. 2. Choose the right configuration for the space Sink specification is never onesize-fits-all. A compact apartment kitchen has different requirements from a large family kitchen, butler ’s pantry, laundry or commercial space. Think about how the space will be used, the available cabinetry and benchtop material, as well as the preferred installation method. Single, double and 1.5-bowl configurations each suit different applications, while undermount, overmount and flushmount options provide further flexibility. Wi t h m o r e t h a n 8 0 s i n k configurations available, Archant gives joiners and fabricators plenty of scope to find an option

GUSTO Sink Station - More than a sink. An integrated workstation with four accessories for prep, rinsing and draining.

ROBIQ - New Zealand's No.1 Archant sink. A proven all-rounder, available across a range of sizes and configurations.

WHISPER Finish - premium textured finish, designed to help reduce the appearance of scratching. Available across selected Robiq, Gusto sinks.

that works for the project, rather than designing the project around what happens to be available. 3. Factor freight into the project Freight is another consideration, particularly when supplying projects outside the main centres or managing multiple jobs across different locations. Knowing freight costs upfront makes it easier to price a job accurately and avoid unexpected costs later.

5. Consider lead times Even a small delay can have a knock-on effect when installation dates are fixed. Lead times are worth checking at the point of specification, particularly for less common configurations, finishes or specialist products. Choosing readily available products, and confirming stock before the job reaches installation, can help prevent the sink becoming the item that holds everything else up.

Consider the sink alongside tapware and cabinet hardware early in the speciﬁcation process. Finishes don’t necessarily need to match exactly, but they should work together as part of the overall design.

4. Match the sink to the project Not every project calls for the same sink. The size of the space, how the kitchen will be used, the overall design and the available budget all play a part in finding the right fit. From hardworking stainless steel through to coloured finishes, EcoGranit, ceramic and integrated sink stations, there are options to suit different applications and price points. The key is choosing where the sink needs to work hardest, and where it can add to the overall design.

6. Think beyond stainless steel The sink is increasingly part of the wider kitchen palette, with material and finish playing an important role alongside function. Stainless steel remains a versatile choice, but options such as Brass, Gunmetal, Antique Brass, EcoGranit and ceramic give designers and homeowners more freedom to create a particular look. Textured ﬁnishes such as Archant’s Whisper Finish can also help reduce the appearance of everyday marks and scratches.

JOINERS Magazine September 2026 page 56

More than the sink itself Ultimately, choosing a sink supplier isn't only about the product. For joiners and fabricators, having the right configuration available, knowing when it will arrive and being able to rely on consistent service can be just as important as what the sink looks like. With more than 8,000 sinks in stock, 80+ configurations and a growing range of materials and finishes, Archant combines choice with the local stock and service needed to keep projects moving. Explore the full Archant sink range at archant.co.nz or contact 0800 ARCHANT.

Which surface is right for the job? Benchtop selection is about more than colour. For joiners and fabricators, the material itself can influence how a project is manufactured, installed, priced and delivered. Archant's surface collection spans silica-free solid surfaces and porcelain, giving joiners different options depending on the requirements of the project. Here are some of the key considerations when choosing between them. Acralux Bring fabrication in-house For joiners, one of the biggest points of difference with Acralux is how it can be worked. The 100% silica-free solid surface can be cut and installed using standard joinery machinery, giving joiners the option to fabricate benchtops alongside the cabinetry rather than outsourcing this part of the project. That can mean greater control over production schedules and installation, while opening another opportunity to retain more of the project in-house. Acralux comes in large-format 3200 x 1600 x 20mm sheets, which can also help optimise material across common kitchen configurations. Its non-porous surface is stain resistant and repairable, with seamless joins possible for a continuous finish. Available across Marble, Stone, Calacatta and solid colour options, it provides the look and tactile

Acralux, Kleenstone and FlorimStone - diﬀerent materials for diﬀerent requirements.

quality of stone with a very diﬀerent fabrication proposition. Best suited to: Joiners looking to bring benchtop fabrication in-house, projects requiring seamless joins, and residential or commercial applications where repairability is valuable.

range also continues to develop, with new colours and options expanding the design possibilities available to speciﬁers. Best suited to: Residential and commercial projects looking for the aesthetic and performance of a stone-style surface without crystalline silica.

Kleenstone: Zero silica, backed by local stock Kleenstone is Archant's zerocrystalline-silica surface made with 85% recycled glass. It is non-porous, stain resistant, scratch resistant, heat resistant and NSF approved for food-safe applications. Available in 3210 x 1610mm slabs at 20mm thickness, the range combines the aesthetic of stone with the health and environmental advantages of a crystalline silica-free material.

FlorimStone: Italian porcelain with design versatility For projects where porcelain is the right fit, FlorimStone offers a large-format Italian porcelain surface suitable for benchtops, splashbacks, walls, floors and other decorative applications. Its lightweight, versatile format allows the same material language to be carried beyond the benchtop and through different areas of an interior.

But for joiners managing live projects, the material speciﬁcation is only part of the equation. Archant is backing Kleenstone with significant New Zealand stockholding and local delivery, helping provide greater certainty around supply and lead times.The

Archant is also preparing to introduce new FlorimStone colours, Marble Yamuna Moka and Marble Yamuna Opal, along with a new 20mm FlorimStone option, giving joiners and designers more choice across both aesthetics and price points.

Best suited to: Design-led projects, large-format applications and interiors where a consistent surface can be carried across multiple applications. Different materials for different jobs There isn't one benchtop material that is right for every project. A joiner wanting greater control over fabrication may look first at Acralux. A project prioritising zero crystalline silica alongside a stone aesthetic may lead towards Kleenstone. And where largeformat porcelain and design flexibility are key, FlorimStone provides another option. Having those choices within one surface collection makes it easier to specify according to the requirements of the job, rather than applying the same solution to every project. Explore Archant's complete benchtop collection at archant. co.nz, or talk to your Archant representative about samples, pricing and the right surface for your next project.

JOINERS Magazine September 2026 page 57

"These machines are built for serious production and can run two or three shifts a day in larger factories, so there's plenty of capacity as we continue to grow."

The production team from Hamilton Laminates with the new KDT nester.

From finishing shop to full production Hamilton Laminates takes control Steve Harker brought more than 30 years of laminate benchtop manufacturing experience to Hamilton Laminates when he founded the business 13 years ago. The model was simple: outsource the benchtop manufacturing and complete the finishing work in-house, including joins, bowl cutouts and waterfall-ends. But a major milestone came five years ago with the acquisition of Benchtops by Design. The purchase significantly expanded Hamilton Laminates' customer base and team. As demand increased, Steve began looking at ways to take the business to the next level. "We reached the point where it made sense to bring the whole manufacturing process in-house," says Steve. That investment became reality last year with the installation of a new KDT CNC and edgebander, both supplied by Jacks. When selecting a CNC, Steve knew the machine needed to suit the demands of laminated benchtop production. "We chose a model with a dual-rotation

spindle, which is important when processing laminated benchtops. We also went with a self-loading unit because benchtop blanks are heavy and awkward to handle. "The automated loading system delivered immediate productivity gains. It's turned what would typically be a two-person job into a one-person operation. One person can independently load and run the CNC." Steve was also surprised by how much CNC technology has evolved. "I remember back in 1998 a similar CNC would have cost around $250,000. I'd spoken with others in the industry and knew roughly what European machines were worth. I can tell you I paid a lot less for our KDT and I’m really impressed with it." Local support and the growing presence of KDT machinery in the region helped cement Steve's decision. "Most machinery is made in China these days, but having local support through Jacks was important for us. There’s already a lot of KDT machines in our area, so we knew we were getting equipment with a solid reputation and support nearby if we ever needed it."

JOINERS Magazine September 2026 page 58

The CNC has quickly become the centrepiece of the operation, running six to seven hours a day and playing a role in every benchtop. "It's become the bedrock of our manufacturing process. We use it to cut blanks before laminating and machine components ready for ﬁnishing," says Steve. While the CNC is heavily involved in day-to-day production, Steve points out that the machine is still only using a fraction of its potential capacity. "These machines are built for serious production and can run two or three shifts a day in larger factories, so there's plenty of capacity as we continue to grow." The new KDT edgebander has a similar impact. "John Walton from Jacks made a point that really stuck with me," says Steve. "He talked about the importance of machine weight, especially when you're processing benchtops rather than standard cabinetry." That advice played a role in Hamilton Laminates choosing the fully automated KDT KE-706. Weighing 2500kg, the machine can handle large, heavy benchtop components while maintaining a consistent high-quality ﬁnish.

Reliability and ease of use were also high on the priority list. "I'd always been told that only one person should operate an edgebander because every operator sets things up differently,” says Steve. “With the touch screen controls, we're not adjusting dials, and we've got several people in the team who can confidently run it.” Hamilton Laminates is reaping the benefits of bringing production in house. "Specialising in laminated benchtops and focusing on doing them well has helped us grow” Steve explains.” Now that we can complete the entire process ourselves, we've got much better control over quality and can make sure we're delivering on time for our customers." With the right machinery, growing demand and capacity to spare, Hamilton Laminates is well positioned for its next stage of growth.

KDT are sold and serviced in NZ by Jacks

JOINERS Magazine September 2026 page 59

HOMAG Treff 2026 HOMAG Treff 2026 will put equal weight on machinery, software and discussion, with new Live-Talks giving visitors a closer look at how manufacturers are dealing with automation, labour pressure and changing production demands. HOMAG Treff 2026 will take place from 22 to 25 September at the company’s Schopfloch and Holzbronn sites in Germany. Over four days, HOMAG will bring together customers, prospective customers and industry representatives for an event focused on technology, practical insight and direct exchange. Under the theme Building connections: Discussing the future face-to-face, the event is intended to combine machinery, software and industry discussion in one setting. For the first time, Live-Talks will be a central part of the programme. These staged and moderated sessions will feature HOMAG experts, technology partners and customers, who will present their own solutions and share their experience with the audience. The talks will address issues many businesses are dealing with now, including further automation, the role of artificial intelligence in manufacturing and ways to maintain or lift output when skilled labour is hard to find. Alongside the machine presentations, the Live-Talks are intended to give visitors a clearer view of how these solutions work in practice. Technology in action HOMAG will present a broad range of manufacturing solutions in operation at both locations. The line-up ranges from compact systems for smaller workshops through to highly automated concepts for industrial batch size 1 production. In cutting technology, HOMAG will show the new SAWTEQ S-190, combining proven cutting technology with simple operation and precise results. Hybrid robot saws will also be a focus, showing how automation can be made more accessible for small and mediumsized businesses. By allowing cut workpieces to be stacked directly on floor-level pallets, these systems can reduce the hall height required and make integration into existing production spaces easier.

Workpieces stacked directly on floor level pallets can make integration into existing production space easier.

Another feature in this area is the anniversary edition of the SAWTEQ S-300 and S-400. Limited to 60 machines, the special edition marks six decades of HOMAG experience in panel dividing. The package includes toleranceCheck, manual offcut management, a two-year warranty extension with wear parts package and one year of intelliDivide. Software and digital integration HOMAG INTELLIGENCE will be presented as a cloud-based platform that links furniture sales, configuration and production in one system. The goal is a continuous flow of data from sales through to manufacturing. Visitors will be able to see how this works in practice and how tighter links between software and machine data can support more efficient production. HOMAG will also present new cutting optimisation functions in intelliDivide, aimed at making cutting processes more transparent, more cost-effective and better matched to individual production needs. Edge technology and CNC In edge processing, the event will cover a wide range of solutions for different production requirements, from flexible entry-

JOINERS Magazine September 2026 page 60

level options to industrial systems for continuous operation. At the entry level, HOMAG will show the EDGETEQ S-300. In the midrange segment, the EDGETEQ S-380 is aimed at more demanding production environments. For industrial applications, HOMAG will present the EDGETEQ S-500 and the new EDGETEQ S-600, both designed for high eﬃciency, stable processes and cost-eﬀective production across a growing range of variants.

Cybersecurity & carpenter days Cybersecurity will also be part of the programme, as connected production systems place new security demands on manufacturers. HOMAG will present its sR Bridge, a hardware component for secure remote service designed to meet current and future data protection requirements. Experts from the company’s service and cybersecurity teams will be available for discussion.

In the CNC sector, the focus will be on processing centres for a wide range of applications. The new CENTATEQ P-510 platform oﬀers greater ﬂexibility and broader processing capability. HOMAG is also highlighting the CENTATEQ E-310 combined with TEQBOT, where the robot supports part handling and can also carry out trimming work.

The final two days of the event, 24 and 25 September, will be the Carpenter days. These will focus more closely on the needs of small and medium-sized businesses, with Live-Talks, a carpenter’s breakfast, a trade exhibition and further networking opportunities. More than anything, HOMAG Treff 2026 is about perspective. Not just what new technology can do, but how it fits into real production, real businesses and the decisions manufacturers are making now.

In drilling and trimming, HOMAG will show the DRILLTEQ H-610 for 6-sided processing and the compact DRILLTEQ V-110 for cabinet manufacturing. The H-610 is aimed at high performance and short idle times, while the V-110 combines drilling, trimming and grooving in a footprint of just 5 m².

For more or to register to attend at one or both HOMAG locations go to www.homag.com/treﬀ

DRILLTEQ H-230 The perfect start in the 6-sides-processing technology

• The 4-fold linear changer offers an individual selection for different requirements and is positioned on the side of the machine to save space. • 2 CNC-controlled clamping devices ensure permanently ﬁrm and precise positioning of the workpieces – regardless of the speed • The DRILLTEQ H-230 offers a comprehensive safety concept with a safety fence that protects on three sides. A light barrier prevents intrusion into the work area. A guard above the movable collets additionally protects the travel area and ensures operator safety during machining.

www.homag.com | sales-australia@homag.com | Toll free 0800 HOMAG1

YOUR SOLUTION JOINERS Magazine September 2026 page 61

The PPG system has proven to be an excellent fit for our business. The products spray exceptionally well, produce a consistently high-quality finish, and the support from Gavin and the PPG team has been outstanding.

The Custom Finish PPG system proves a winner For the past nine years, The Custom Finish has been providing specialist spray painting and finishing services to residential, commercial, and trade clients throughout the Top of the South. Built on a reputation for quality workmanship and attention to detail, the business has become a trusted name for high-end finishing of cabinetry, furniture, kitchens, bathrooms, and interior joinery. Over the past year, an exciting opportunity arose to purchase the plant and equipment of Point of View Finishers, the well-respected finishing business owned and operated by Sean and Jess Barton. As part of the acquisition, Sean and Jess have joined The Custom Finish to manage the business, bringing with them many years of specialist ﬁnishing experience and a loyal customer base. The business offers a comprehensive range of ﬁnishing services, including wood and MDF coating, spray painting,

kitchen and bathroom resprays, stain and colour matching, highgloss ﬁnishes, glass splashbacks, exterior furniture, entrance doors, and clear coating for timber and veneer. The acquisition also saw the continuation of the PPG coating system, which Sean and Jess had successfully used for many years at Point of View Finishers. Working alongside PPG Business Development Manager Gavin Graham, the transition to the expanded operation has been seamless.

JOINERS Magazine September 2026 page 62

"The PPG system has proven to be an excellent ﬁt for our business," says Managing Director Jack Wells. "The products spray exceptionally well, produce a consistently highquality ﬁnish, and the support from Gavin and the PPG team has been outstanding." Alongside an extensive range of standard colours, PPG's advanced colour-matching technology enables The Custom Finish to produce customised colours to meet clients' individual requirements. Combined with PPG's two-pack clear coatings and polyurethane systems, the

business delivers premium, durable ﬁnishes across every project. Today, The Custom Finish continues to service clients throughout the Nelson Tasman region, working with homeowners, designers, builders, architects, cabinetmakers, and commercial customers who value specialist expertise, quality craftsmanship, and outstanding ﬁnishing results.

E: sprayshop@thecustomfinish.co.nz Tel: 027 337 3015

Product Release

December 2024

660 COLOURWASH

DISTRIBUTORS Whangarei Paint Centre Whangarei (09) 430 2414

To provide natural & decorative colours for interior timber products

Wairau Paint Centre Auckland (09) 443 3430 PPG Industries NZ Ltd Auckland (09) 573 1620 Grayson Auto Colour Centre Auckland (09) 278 0685

• Application friendly • Solvent based timber stain

Autolink Distributors Ltd Hamilton (07) 846 1443

• For interior use • Designed tp prevent pooling or blotching

Linkup Paints (BOP) Ltd Tauranga (07) 571 8921

• Can be used with multiple clear coats • Available in a wide range of the latest fashionable colours

Complete Paints Ltd Napier (06) 843 1122

USES

Total Paint Supplies Ltd New Plymouth (06) 769 9415

Designed as a high quality furniture stain for kitchens, shop ﬁttings, cabinets, desks, panelling, partitions and most interior wood.

Total Body Shop Ltd Wellington (04) 586 6681 Paintco Nelson (03) 546 6660

For more Information please contact PPG

PPG Industries NZ Ltd Christchurch (03) 384 0255 Rainbow Paints Ltd Dunedin (03) 474 0659 Southern Paints Invercargill (03) 218 4664

PPG Industries NZ Ltd, 5 Monahan Rd, Mt Wellington, Auckland Freephone 0800 990 093 • Freefax 0800 659 377 • www.ppgic.co.nz

JOINERS Magazine September 2026 page 63

When Artiture Joinery took delivery of their new HD511J edge bander from Hold Machinery Ltd, they expected a smooth installation. What they didn't expect was to be using it that same evening. The Hold Machinery team arrived at the workshop on the North Shore early in the morning. The machine was unloaded and moved into position without disrupting the shop floor's daily workflow. By midday, the bolting and levelling were complete. By mid-afternoon, electrical connections and pneumatic lines were in place. By late afternoon, the calibration was finished and test pieces were running through. Later that night, Artiture's operators were running actual production jobs on it. "That's not something you see every day," says owner Paul Lu. "They had a plan, they worked efficiently, and they didn't leave until everything was properly up and running. There was no rushing—just a job done right." Based on Auckland's North Shore, Artiture Joinery has built a solid reputation over the years for bespoke cabinetry and high-end commercial joinery. With a team of 18 skilled craftspeople and a workshop that runs across a range of projects—from custom residential cabinetry to commercial fit-outs and corporate interiors—they have earned the trust of architects, designers, and repeat clients alike. Paul puts it simply: "We don't believe in cutting corners. Every job that goes out has our name on it, so we want to be sure it's right."

Installed in a Day, Checked on Along the Way

“I don't think they even called it a service visit," Paul recalls. "They just came by. If the guys on the floor had a question, great—they'd sort it out on the spot. If everything was fine, they'd remind them of a few maintenance points. It was genuine. You could tell they actually cared." That kind of attention makes a difference in a busy workshop. When your team is focused on meeting deadlines and delivering quality, having someone look out for the equipment—without being asked— means one less thing to worry about. Paul reflects on what that level of support has meant for his business: "We don't have to wait for something to go wrong to know we're supported. They show up before we even think to ask. That gives us real peace of mind." The HD511J itself has done what Artiture needed it to do— consistent edges, reliable operation, straightforward for the team to use. But when Paul reflects on the decision to buy, he keeps coming back to the people behind the machine.

Installation Day - Hold Machinery with Artiture Joinery team

That same philosophy guided their search for a new edge bander. They needed something consistent and straightforward to operate—a machine that could handle batch runs without constant supervision, and deliver clean, reliable results every time. The HD511J delivered on that front. It has proved easy for the team to learn, simple to maintain, and dependable in daily use. But what has stayed with Paul—and what he brings up without prompting—is what happened in the weeks and months after installation. It wasn't in the contract. There was no service agreement stipulating followup visits. But from time to time, a Hold Machinery technician would drop by the workshop when they were passing through the area. Not for any particular reason—just to see how the team was getting on. They'd pull on a pair of safety glasses and walk out to the machine with the operators. They'd chat about any small questions that had come up during the week, check a setting here, offer a tip there, and take a quick look at the machine's general condition. No charge. No paperwork. No fuss.

www.holdmac.co.nz

JOINERS Magazine September 2026 page 64

Artiture Joinery Craftsmanship Redefined. "The machine is good. But the support—that's what made the difference," he says. "Not because we paid for it, but because they gave it anyway. That's the kind of partnership that makes you feel like you're not on your own." For Artiture Joinery, the installation took one day. The peace of mind has lasted much longer.

HOLD MACHINERY PRODUCTS BUILT FOR KIWI CABINETMAKERS

CNC Router Line & Nesting Machine – Available in sizes up to 1220×2750mm, 1220×3660mm, or 1820×3660mm, with dual‐head labeling/stacking that runs 50% faster than single‐head systems. Choose a 9kW or 12kW spindle paired with a 12‐tool linear ATC (mounted on the gantry for rapid changes), plus safety light curtains, servo drives, vacuum table, ±0.001mm tool setter, dry blower. Optional upgrades include auto‐labelling over the loading table, full load/unload systems, multi‐zone vacuum table, 25m/min feed speed, and a super‐heavy duty model.

Edge Bander – HD621J (Laser + Gluing) 6940 mm Length | Electric lifting | Feed speed gluing: 1420-23 m/min, laser: ≤23 m/min 3kW patented laser system + fast‐melt gluing unit + quick change gluing system Notch edging – one‐key changeover on screen Pre‐milling, releasing device, panel heating unit for cold shops End cutting, rough + fine trimming with hinge‐hole avoidance Corner rounding, pneumatic scraping, flat scraper, buffing 21.5" intelligent screen – real‐time I/O & inverter monitoring

Edge Bander – HD511J Electric lifting | Feed speed 14-20-23 m/min 250mm lengthened feeding plate – stable for long boards Notch edging, no‐tape alarm, quick‐change gluing system Pre‐milling, releasing, heating unit, pressing unit End cutting, pneumatic fine trimming, corner rounding, scraping, flat scraper, buffing 15.6" touch screen with fault code & edge counting display

Bevel Edge Bander – HD782 Table Saw MJ320DK sliding table | Max blade Ø350mm | Cutting height 90mm 5.5kW main saw + 0.75kW scoring saw – splinter‐free cutting on both sides Electric lifting of main saw, blade tilt 0–45° European‐style parallel fence, aluminium alloy middle scale High‐chromium steel guide rail – precision & long life Touch screen control www.holdmac.co.nz info@holdmac.co.nz 09-2173489; 022 466 9899

For bevel edge finishing Bevel pressing then straight pressing – solves glue separation at leading edge Crushing & moulding saw blade unit End cutting, rough/fine trimming, scraping, flat scraping + cleaning agent, buffing Electric pressure beam lift – touch screen controlled 25a Andromeda Crescent, East Tāmaki, Auckland

JOINERS Magazine September 2026 page 65

Safety in Joineries How do you get the best value for your dollar when you buy a dust extraction system to keep your business compliant? Most business owners want to take H&S seriously: the benefits of a compliant well organized dust free workshop, with all staff actively engaged in the procedures to be followed, increases productivity, improves quality of finished products and results in healthier staff - not taking sick leave due to respiratory issues caused by the dusty environment they operate in. True compliance can often be seen to be time consuming, (with endless updates of documentation for policy, procedures and hazard registers) and/or expensive! Improving the work environment by investment in a new dust extraction system might conflict with wanted expenditure on new machines to improve productivity. Earlier this year, Worksafe targeted wood manufacturers (which includes processors and joineries), in a drive to improve understanding of what is compliance, and, to guarantee workers were being kept safe. Guidelines for implementing practical steps to improve were issued to hundreds of companies: highlighting that many businesses are still operating without effective controls in place to limit exposure to wood dust, as well as other noncompliances. So whilst production may be a bit slower, it is a good time to assess your dust extraction, ready for when the market does improve. But with financial restraints affecting most industries still, it is even more important to ensure that any purchase decision is the best offer available for your budget – and it’s not just the cheapest price that owners or their accountants should consider. Scott Saunders who is the Southern based Sales Manager for NZ DUCT has been visiting joineries for over 10 years, and comments that “Original dust extractors installed for a company were probably fit for purpose at the time, but the problems occur when new machines are added or

NZ Duct&Flex systems can be added to, reconfigured, or transferred to suit a company’s changing needs.

a CNC machine, edge bander or table saw are upgraded. No one factors in the new air volumes that will be required; hence the original system will give poor extraction leading to dust build up in ducting, (a ﬁre hazard), blocked ﬁlters, and a dusty non-compliant workshop.”

needs, knowing in the future the unit can be very simply expanded if your require a bigger filter area, or, a bag exit system can be switched to bin collection as you need more capacity by simply lifting the original unit onto a frame.

When purchasing new machines, it is important to ask a dust extraction expert, not the new machinery provider, what the additional extraction requirements will be, and what might be any (hidden) maintenance costs such as replacement ﬁlter socks

NZ DUCT+ FLEX have a range of filter types to meet all needs and budgets. If installed by our own permanent install team as specified by our technical Sales Managers, we will offer a 3-year warranty including the filter media.

Since the 1980’s, the modular ducting system sold by NZ DUCT+Flex has been available to joiners. The original modular system in NZ, the LIPLOCK system, long lasting finely galvanized finish has saved 100’s of joinery workshops money due to the system being able to be undone and reconfigured as many times as necessary, to accommodate new machines, or be dismantled and transferred to new premises, saving set up costs. The advantages over the cheaper leaky spiral are well known particularly in a dangerous wood dust environment. For dust extractors, the NZ DUCT+FLEX basic range of modular filters has a flexibility which can save you money long term – you can purchase a unit now that will cover your current

JOINERS Magazine September 2026 page 66

Over 100 wood dust collectors have been installed by NZDUCT+FLEX for: • Family joinery’s • Kitchen manufacturers • Large wood processing yards Seek advice from a company that has the experience and expertise to make sure you are getting the best value for money and know that your decision now, is future proofed for later, when your productions will expand. There are many specialist dust extraction companies making claims re airflows and unique design, it can be difficult to truly compare like with like when several quotes are sought. The most important factor to assess any dust filtration collector is to know its filter area rather than fan size which many will promote. If the filter area is basically too

small for the dust load, a more powerful fan will make things worse with blocked bags or cartridges. Short filter media life is a sign of undersized dust collectors. Some units will run 10-15 years and longer with the original filter socks. Others will need replacing regularly if the filter was undersized probably offered at an attractive quoted price. The filter media will take time to block, weeks, maybe 3-6 months. But you have now paid for a system that won’t give you long lasting performance, and remaining as efficient as the day it was commissioned for the many years you expected. Cheapest is never the best! Keep asking your supplier for the filter area that matches quoted product: until you get this information, it is impossible to compare all the other quotes! Ask about the warranty, does this include the filter socks, and how often the supplier expects you to need to change these. If the answer is every year, the quote may not be as good as it looks!

For more information visit www. nzduct.co.nz or call for a FREE assessment of your extraction needs on 0508 69 38 28

SUPPLYING THE KITCHEN AND JOINERY MARKET FOR OVER 40 YEARS! WHATEVER YOUR BUDGET, WE CAN HELP SOLVE YOUR DUST ISSUES • Save money by self-installing. Full assembly instructions supplied or ask for your local sales manager to call and advise on the best solution – future proofed- for the way you work. • Or work with our experienced staff who design systems using our large range of filters from world leading European suppliers. We guarantee quality and a good price due to their scale of production.

SELF BUILD 50

$15,999 INCL. FAN (EXCL GST/FREIGHT)

2 Module filter ideal for your workshop with: • CNC + edge bander • 2-3 machines • 6,000 m³/hour airflow • 50m² filter area

SELF BUILD 100

$29,999 INCL. FAN (EXCL GST/FREIGHT)

4 Module filter ideal for your workshop with: • 6-10 machines • 10,000 m³/hour airflow • 100m² filter area

THINKING OF UPGRADING? Are you planning to move your production to a new site? Will this be your first proper full sized extraction system instead of using inefficient trolley filters? Let us help you get the best extraction that money can buy: for your staff’s health and efficiency of your business

BESPOKE DESIGN & BUILD

$30,000 - $1M +

FROM

(EXCL GST/FREIGHT/ELECTRICS/PLINTH)

SUPER SAFE SOLUTION

$51,000

• ATEX certified • Unique flameless explosion venting

Our advice is FREE!

INCL. FAN (EXCL GST/FREIGHT)

Freephone 0508 NZ DUCT (0508 69 38 28) 13F Saleyards Road, Otahuhu, Auckland P: 09 276 8020 F: 09 276 8070 E: info@nzduct.co.nz

www.nzduct.co.nz

Our range of LIPLOCK ducting, flex and self build filters, super safe filters are all EX-STOCK!

VFV

JOINERS Magazine September 2026 page 67

Concelo entro Hidden function in a high-end alpine retreat Set in the alpine landscape of Dalefield, Queenstown, this pavilion style guest sanctuary was designed as a place for complete retreat. Led by Architectural Designer, Leigh Garner alongside Interior Designer, Denim Draper, Directors of Origin Studio, the project balances modern architectural lines with a warm, grounded material palette. Dark timber ceilings, deep toned cabinetry in Dulux ‘Terrible Billy’, and subtle brass detailing create a sense of enclosure and calm, while expansive glazing opens the interior to the surrounding mountain views. The result is a space that feels both protective and connected to its environment.

Design: Leigh Garner and Denim Draper – Origin Studio.

2QNTCKX

$XVWUDOLD 1HZ =HDODQGoV OHDGLQJ

5(029$%/( /$%(/6 0DQXIDFWXUHU IRU WKH &DELQHWU\ QGXVWU\ VWU\ -RLQHU\ ,QGXVWU\

DOODERXWODEHOV FRP DX FDELQHWU\ODEHOV#DOODERXWODEHOV FRP DX

JOINERS Magazine September 2026 page 68

Within this highly open plan layout, every detail needed to integrate seamlessly, particularly in the kitchen, which remains fully visible from the living area. The new Concelo entro waste system by Hideaway Bins was speciﬁed to ensure functionality could be completely concealed within the joinery. Installed behind custom Shaker drawer fronts, the system maintains a clean, furniture like appearance. For the design duo, both performance and discretion were key, highlighting the choice of Concelo entro for its integration onto the Blum MERIVOBOX runner system, delivering smooth movement consistent with the project’s reﬁned material quality. The Clip’n’Clean system was also noted as important, allowing the waste bin to be cleaned thoroughly between guest stays, while the Active Lid provides

Photography: John Williams – JW Photography

effective odour and moisture control to maintain a fresh internal environment. By resolving waste discreetly, the design remains focused on what matters most: material quality, spatial calm, and the surrounding alpine outlook.

Bin System: Hideaway Bins Concelo entro – CE350-216 (BM) - SW

To learn more, visit hideawaybins.co.nz or contact our national distribution partner BLUM, or regional distributors NZ Panels and Industry HQ.

The perfect pairing of Concelo’s state-of-the-art waste management and Blum’s world-class drawer technology.

Available nationwide from Blum hideawaybins.co.nz JOINERS Magazine September 2026 page 69

With duct runs stretching up to 100 metres, high-pressure fans keep suction consistent across the entire system — engineered so scale was never going to be a compromise.

Upgraded ductwork and the relocated MEC 15 extractor outside Hallmark’s new Rangiora Business Park facility.

Egmont Air keeps Hallmark’s new factory moving On the move Hallmark Group is New Zealand’s largest NZ-owned door manufacturer, with more than 30 years serving the architecture, design and construction industries. When they built a new facility at Rangiora Business Park — set to become one of their key manufacturing hubs — they brought in Egmont Air to relocate their existing extraction equipment and design an upgraded dust extraction for the new site. At the centre of the project was the MEC 15, Egmont Air ’s industrial dust extractor built for heavy-duty manufacturing environments. Units like it are designed for longevity — able to be decommissioned, relocated and recommissioned as a business grows or moves premises, which made it a natural ﬁt for a project like this. The new site needed two independent systems, one for treated timber and one for

Clean air, right on schedule Both systems were installed and commissioned ahead of Hallmark’s move, letting the company transition into its new hub with minimal disruption to production. Running treated and untreated timber through separate systems keeps dust management, air quality and compliance tightly controlled across the site — a setup built to serve Hallmark well into their next chapter of growth.

Both systems were installed prior to Hallmark’s move to minimise disruption.

untreated, with a combined air volume of 74,000m³/h. Alongside the relocated MEC 15, the scope included all new ductwork, upgraded fans and an expanded ﬁlter system. Built to handle the scale Scale brought its own engineering d e m a n d s . Wi t h d u c t r u n s stretching up to 100 metres, high-

JOINERS Magazine September 2026 page 70

pressure fans were needed to hold suction across the full length of the system. Fire separation rules also ruled out running ductwork straight through the ﬁrewall, so the team routed 900mm-diameter ducting up through the roof and over the wall to connect with the baghouse — keeping the system compliant without compromising performance.

Egmont Air designs and installs dust extraction solutions for operations of all sizes, working alongside architects to ensure every system integrates cleanly with the building itself.

0800 781 200 sales@egmontair.co.nz www.egmontair.co.nz

Baking up a storm Opticoat® Gingerbread & Biscotti We’ve taken our sweet time (we grew a few grey hairs in the process) but we’ve been baking up a storm and we’re excited to introduce you to Gingerbread Oak and Biscotti Oak: our newest Opticoat® woodgrain colours, featuring quarter cut (Biscotti) and crown cut (Gingerbread) style oak for our thermoform range. Opticoat® Gingerbread Oak is a similar colour style to Planked Urban Oak, while Opticoat ® Biscotti Oak is similar colour tones to Ranfurly Oak from the melamine ranges – both being colours that are much-requested in our range. With lovely textures & natural prints, Gingerbread and Biscotti will work well for linear profiles (bar back panels, Flexipanel curves, vanity fronts) as well as frame-style profiles, and, of course, the iconic gingerbread man shape! We've taken some time to find the right materials for this range. We wanted to work with a highquality coating, we wanted to have nice textures that looked natural, and we wanted to have prints that looked authentic, while also being close enough to existing melamine colours for those that wanted to use them together in a kitchen design. Available with all the Opticoat frills, including: NZ’s longest thermoform panels: Opticoat ® is available up to 3100mm long in any profile in genuine thermoform finish in all of our profiles, possible with our extra-long thermoform press, the first of its kind in New Zealand. Latest automation technology: Opticoat ® doors are coated in our state-of-the-art thermoform facility, featuring a fully automated system from Europe - with all

doors actually spending a period of time in an ‘oven’! The system is also in a controlled environment, to enable fine control over all aspects of production (meaning perfectly baked gingerbread men every time!). Customisable profiles: Opticoat® features a wide range of customisable profiles, along with linear profiles that automatically adjust to fit to the size of the panel. Double Sided Panels: We can make fully thermoformed, double sided panels, with no joins on the back - pushing the limits beyond what was previously available in NZ. Short 6-day lead time: Using the latest in automated thermoform technology, we have a super short 6-day lead time (fresh cookies taste best!). Flexipanel for curves: Flexible panels are available in matching linear door profiles, with wrapped ends for a finished look & easy installation. Three handle styles: With three integrated handle options to choose from, handle-less kitchens with thermoform have never been easier, with the J Handle, Inset Handle and Profile Handle. Get in touch with Sage Doors for more information and samples.

JOINERS Magazine September 2026 page 71

NKBA Executive Oﬃcer Rachael Kwok

Raising standards & building capability New Zealand kitchen and bathroom designers and manufacturers have long been recognised for their innovation, craftsmanship and attention to detail. However, delivering exceptional projects today requires more than technical skill. It relies on designers, manufacturers, installers and trades working together from a common set of standards and expectations. technical expertise and problemsolving skills required to succeed.

To support this, NKBA has developed two significant new industry resources: the Bathroom Spatial Design Guidelines and Bathroom Drawing Standards. These practical documents provide clear guidance on bathroom planning, documentation and best practice, helping to improve consistency, communication and project outcomes across the industry. Updated versions of the popular Kitchen Spatial Design Guidelines and Kitchen Drawing Standards are also currently under review, ensuring they continue to reflect current industry requirements and best practice. While these resources have obvious value for designers, they also offer significant benefits for joinery manufacturers and cabinetmakers. Too often, manufacturing delays, site variations and costly rework can be traced back to incomplete documentation or inconsistent interpretation of plans. Drawing Standards help ensure that critical information is clearly communicated from the outset, reducing ambiguity and providing manufacturers with the details needed to produce work accurately and efficiently. The result is fewer questions, improved workflow and a smoother journey from design through to installation. The Spatial Design Guidelines complement these standards by promoting proven principles for layout, ergonomics, safety and functionality. Whether designing a high-performance kitchen or a compact bathroom, applying consistent spatial planning principles helps create spaces that are not only beautiful, but practical and user-friendly.

Brass in Chocolate, designed by Shane George from Shane George Design. Photographer: Jamie Cobel.

However, education does not stop when someone enters the workforce. Ongoing professional development is essential in an industry that is constantly evolving. Regulations change, products improve, technologies advance and customer expectations continue to rise. Industrydeveloped resources, training programmes and qualifications help ensure professionals at every stage of their career can continue to build their knowledge and skills. This is one of the greatest beneﬁts of belonging to a membership organisation. Associations such as NKBA bring together the collective expertise of industry professionals to develop resources, education programmes and best-practice guidance that beneﬁt the entire sector. Access to technical standards, professional development opportunities, networking events and industry insight helps businesses remain competitive while raising standards across the board.

Verdant Oasis, by Nicola Manning Design. Photographer: Mark Scowen

These resources also play an important role in education, which remains one of the biggest priorities for our industry. Across the construction and built environment sector, employers continue to face challenges attracting skilled people and developing the next generation of professionals. The introduction of the new Construction and Built Environment school subject is a positive step forward, exposing secondary school students to the wide range of careers available

JOINERS Magazine September 2026 page 72

within the built environment and helping create pathways into further training and employment. For the joinery, kitchen and bathroom sectors, this presents an exciting opportunity. Many young people are unaware of the diversity of careers available, from design and manufacturing through to project management, installation and business ownership. Industryled education initiatives help showcase these opportunities while demonstrating the creativity,

The upcoming launch of the NKBA Bathroom Spatial Design Guidelines and Bathroom Drawing Standards, together with the updated kitchen resources, represents an investment in the future capability of our industry. By supporting education, embracing best practice and working collaboratively, we can continue to build a stronger, more skilled and more professional sector for generations to come.

QUALIFICATIONS

THAT FIT WHAT YOU DO WORK SMARTER

Have your team work smarter, learn up-to-date skills.

TRAIN AN APPRENTICE

Help them learn the skills and become qualified.

ALREADY HAVE THE EXPERIENCE?

Get skills recognised with a formal qualification.

GROW YOUR BUSINESS THROUGH TRAINING

Training an apprentice is an investment in your business and the industry.

CALL BCITO TODAY

JOIN-2150

0800 4 BCITO (422 486)

JOINERS Magazine September 2026 page 73

Targeted checks highlight opportunities to lift safety in joinery sector

Before and after shots illustrate the diﬀerence working extraction systems and simple housekeeping can make.

A recent WorkSafe initiative has found many joinery businesses could benefit from improving how they manage machine safety, workplace health risks, and hazardous substances. The insights come from proactive visits to more than 600 wood product manufacturing businesses between January and March this year, including over 100 joinery workshops, most of them small to medium-sized.

Managing the risks of exposure to wood dust was a consistent issue. Among the businesses assessed, common gaps included poor housekeeping, limited training, and incorrect selection or use of personal protective equipment (PPE). Overall, 56% had PPErelated issues. “Exposure to wood dust can have serious long-term health eﬀects,” says Valladares. “Simple steps like choosing the right respirator and making sure it fits properly can make a big diﬀerence.”

Manufacturing remains one of Aotearoa New Zealand’s highest harm sectors. It accounts for the highest rate and number of injuries with more than a week oﬀ work, with around 200 injuries each year involving machinery. WorkSafe’s assessments focused on the critical risks most likely to cause serious harm: machine safety, exposure to wood dust, fumes and chemicals, and hazardous substances management. More than 85% of joinery businesses that were assessed by WorkSafe inspectors received guidance and practical support to strengthen their health and safety practices.

Hazardous substances management also stood out, with 60% of businesses needing improvement. In many cases, basic information such as safety data sheets or inventories were missing. WorkSafe’s Hazardous Substances Principal Advisor Susan Collier says these gaps can leave workers exposed to both immediate and long-term harm. “The consequences of not properly managing hazardous substances can be immediate – people can be overwhelmed by toxic gases and burned by spills. But what’s more common is that people may be exposed but they don’t feel the eﬀects until many years later.”

Project lead Savio Valladares says the most common areas needing improvement were machine safety, hazardous substances management, and local exhaust ventilation. However, he emphasises that practical improvements are within reach. “Making work safer starts with the basics – good training and worker engagement, effective supervision, properly guarded and maintained machinery, and controlling dust and fumes.”

She says there are ways of working with these substances that ensure worker safety – and a good starting point is the safety data sheets which businesses can get from their suppliers. “We also have a Hazardous Substances Calculator available online. And if you input your data it’ll spit out a controls report speciﬁc to your business, to help with safe storage and management. It’s really useful and businesses don’t have to navigate this alone.”

JOINERS Magazine September 2026 page 74

That’s a sentiment that’s echoed by Savio Valladares: “Our inspectors have a lot of knowledge and information available, which can help ensure workplaces are safer and better for everyone. Another thing that can really help is looking inside your business - good worker engagement can help identify and address some of these problems. It really is at the heart of what we do and can be a really valuable tool for businesses.” From shutdown to turnaround an example of Worksafe intervention When WorkSafe inspector Mike McConnell arrived at a small joinery for a routine visit, the situation was serious. Dust coated almost every surface. Offcuts surrounded machinery, creating trip and fire risks. Dust extraction units were running but not connected. “They were just sucking air,” he says.“Electrical risks were visible. A worker was operating alone in the workshop, breathing in fine wood dust. It was the worst place I’d ever seen.” Work couldn’t continue. A prohibition notice, a legal direction that stops work immediately when there’s serious risk of harm, was issued. For the owner, who asked to remain anonymous, it was confronting but fair. “I knew it had got too bad,” he says. “It needed to be cleaned up.” What followed was a focused turnaround. With support from WorkSafe, the workshop closed for a week. The space was thoroughly cleaned, extraction systems repaired, electrical risks addressed, and housekeeping rebuilt.

Just as importantly, the focus shifted to worker health. The owner learned more about wood dust risks, arranged health monitoring, and made sure proper personal protective equipment was available. “I didn’t realise how much the evidence had changed over the years,” he says. “You’ve got to take it seriously now.” The prohibition notice still hangs on the wall as a conversation starter. “I’ve heard people dismiss WorkSafe and its inspectors in the past, but in my experience, they’ve provided really useful advice – they’re able to look at my workshop with a fresh set of eyes and point out risks that I don’t see. “WorkSafe are welcome to come into my workshop – their advice could save my, or someone else’s, arm or a leg. Why would you want to avoid that ?” For WorkSafe’s Mike McConnell the visit reinforces what the job is all about: “This was the best result, a huge improvement in health and safety without anyone having to suﬀer an injury ﬁrst. Everyone worked together to ensure the business got back up and running as quickly as possible. It’s satisfying when we can work closely with others to help them identify and address hazards before someone gets hurt.” Businesses can find guidance on managing manufacturing risks on the WorkSafe website at www. worksafe.govt.nz

Motion plastics specialist develops a lightweight energy chain for simple gliding applications with long travels

igus has developed a new cost-eﬀective energy chain, the glide-chain, specifically for gliding applications such as indoor cranes.

Reduce costs for indoor cranes by up to 40% with the new igus glide-chain The energy chain specialist igus has developed a product speciﬁcally for gliding applications that are ideal for travels of up to 30m, as with indoor cranes. Its slim design ensures cost savings of 30 to 40%. Energy chains made from high-performance plastics are in use worldwide. They are primarily intended to guide cables reliably, e.g. on indoor cranes used in production halls. igus has now developed a new, particularly cost-effective and lightweight chain, ideal for simple gliding applications with travel distances of up to 30m.

Effortless Lifting

The glide-chain G4.42 is characterised by its extra-large sliding surfaces and speciﬁc material, which is only used where it is needed for sliding movements. Thanks to this innovative design, the G4.42 is up to 25% lighter than standard igus chains. Another advantage of the G4.42 is the cost-optimised side link used on the left and right. Combined with the large pitch, the glide-chain consists of just a few individual and diﬀerent components. This results in a price advantage of 30 to 40% compared to standard chains with the same dimensions from igus's E2 and E4 product range.

In times when customers are under massive pressure to reduce their costs, igus has developed a product that not only saves money, but also has a long service life in the application. The new glide-chain was also subjected to intensive test series in the company's own 4,000m2 test laboratory. Furthermore, igus gives a four-year guarantee on all its energy chains. You can find more information about the glidechain online at: https://www.igus.eu/energychain/news/series-g4-42

Precision Holding Ergonomic Vacuum Lifting and Secure Vacuum Clamping Treotham Automation supplies the full range of Schmalz Vacuum Lifting devices, customizable and suitable for standard weights up to 750kg. Schmalz clamping solutions are used for a wide range of machining and assembly Go to the website tasks. With vacuum power, components made from wood, metal, glass or plastic are ﬁxed securely and without distortion.

JOINERS Magazine September 2026 page 75

Contact Treotham Automation • 0800 847 2004 • info@treotham.co.nz

When the programme runs faster than the workshop

T Steering a course Ian Featherstone

Ian Featherstone is a cabinetmaker, business advisor, mentor and leadership coach. Glass Half Full provides tailored solutions to lift performance and drive growth. Ian specialises in the joinery & cabinetry sector and other construction related industries. For more information or to find out how you can move your team forward, please visit www. glasshalﬀull.co.nz

alk to almost anyone in joinery, cabinetmaking or commercial fit-out at the moment and the conversation turns, sooner or later, to the same two words: time and capacity. Not enough of the first, never quite enough of the second. It shows up differently depending on the work. In residential and boutique commercial joinery, it's the client or designer who wants an eight-week kitchen delivered in five. In larger commercial fit-outs, it's a head contractor's programme that assumes fabrication can simply compress to absorb someone else's delay upstream — a late consent, a design change, other trades, a landlord handover that slips. Either way, the pressure lands in the same place: your workshop floor, your install crew, and your Monday morning schedule. None of this is new. But it feels sharper right now, for a few reasons worth naming. Why it's biting harder • Programmes are being set before design is locked. Shop drawing approval still takes weeks, but the install date doesn't move to match. There is a requirement for shop drawings much more often today. • Commercial fit-out dates are often fixed by someone else's deadline — a store opening, a lease start, a hospitality launch — leaving joinery to absorb the schedule risk with none of the schedule control. Too often the clients or main contractors programme is not realistic and has been designed to “fit” the timeline, not the real amount of effort required in days. • Skilled labour is still tight, so the workshop that could once flex up to meet a spike often can't.

•

Everyone is quoting and accepting tighter lead times to win the work, which quietly transfers the risk from the sales conversation onto the production ﬂoor and to our industry.

The result is a familiar pattern: jobs queue up, WIP creeps higher than it should, and the business runs hot enough that one late delivery from a supplier or one sick day in the workshop turns a tight programme into a broken promise. We often react by putting more people on a job, resulting in the hours running over, variable quality and ultimately less proﬁt. The 80% rule still applies I've written before about the construction industry's danger zone — running at 80%+ of true capacity. It's worth repeating, because it's counterintuitive: a business booked out doesn't have more slack to absorb disruption, it has less. Queuing theory backs this up in every trade, not just ours — utilisation above roughly 80% is where lead times stop scaling in a straight line and start blowing out exponentially. The busier you are, the more a single hiccup costs you.

6. Practical moves for a tighttimeline market 1. Know your real capacity, not your hoped-for capacity. Machine hours, bench hours and install crew hours are three different constraints — track them and measure them separately. A full order book on paper can still be running one of the three into the ground. 2. Quote lead time like it costs money — because it does. If a shorter programme means overtime, a subcontracted install crew, or bumping another client, price it in. A tight deadline is a service, not a favour. At least let your clients know your

overtime rates if you are forced to attempt to shorten the programme from what was originally agreed. Push back on programme dates that were set without you. On commercial fit-outs, get shop drawing sign-off and site-readiness dates written into the programme, agree how many days or weeks you will allow together to get the shop drawings done and signed off, with your fabrication start date tied to them — not a fixed calendar date that ignores upstream delays. Build a buffer into scheduling, not just into quoting. A production schedule with zero slack looks efficient until the first supplier delay or callback. One flexible slot a week absorbs more stress than any amount of overtime after the fact. Say no on purpose, not by accident. Every job accepted without checking real capacity is a decision to let something else run late — a current client, your team's hours, or your own margin. Make that trade-off consciously, not by default. Communicate early, not when it's already a problem. A client or head contractor told about a risk three weeks out can usually work with it. Told three days out, it becomes a dispute.

The upside None of this is about turning work away for its own sake. It's about recognising that in a market where everyone is under timeline pressure, the businesses that protect their capacity — and are upfront about what they can genuinely deliver — are the ones building the reputation that lets them charge properly and choose their clients. Being realistic isn't the cautious option here; it's the competitive one. 

JOINERS Magazine September 2026 page 76

Recognising Mark Pickford 2026 Owen Wright Memorial Trophy recipient

he Owen Wright Memorial Trophy was established in 2011 in memory of Owen Wright, then President of the Canterbury New Zealand Manufacturers Association, a respected industry leader known for his wisdom, generosity and commitment to supporting others. Presented annually, the award recognises an individual who embodies that same spirit of leadership, service and contribution to the industry.

His contribution extends well beyond his own business, with more than three decades of involvement with Master Joiners, including serving as both Central and National President.

At the 2026 Master Joiners Awards Dinner, the trophy was presented to Mark Pickford of HR Jones & Co Ltd, Feilding, recognising an exceptional 50-year career and his signiﬁcant contribution to the New Zealand joinery industry.

Mark’s commitment to craftsmanship, leadership, and the next generation has left a lasting impact on both Master Joiners and the wider joinery industry.

Mark has also been a strong advocate for training and mentorship, supporting apprentices and workforce development through his involvement with JITO and sharing his knowledge generously with those around him.



From starting as an apprentice at HR Jones & Co Ltd to becoming a long-standing business leader, Mark has dedicated his career to the growth and strength of the joinery industry.

JOINERS Magazine September 2026 page 77

STATE OF THE INDUSTRY Reports from Branch Presidents August 2026

AUCKLAND It's hard to believe we're already halfway through 2026. So far, this year has been challenging, with inconsistent workloads creating a highly competitive market and driving some extremely aggressive pricing. The kitchen sector continues to experience a slower market, with low-to medium-value manufacturers feeling the strain most acutely. Many businesses are facing significant challenges in the current market, largely due to the continued decline in group housing developments. With fewer large-scale projects available, order volumes have reduced, competition has intensified, and margins have become increasingly tight. "Patchy" is once again the word I would use to describe the timber window and door sector. The pipeline of larger projects has largely dried up, with most businesses relying on a steady stream of smaller jobs to keep busy. While this has helped keep the industry moving, it has created a more hand-tomouth environment and lacks the efficiencies and certainty that come with larger, long-term projects. Encouragingly, there has been an increase in the number of larger projects coming out for tender in recent weeks. While this is a positive sign for the future, these projects are unlikely to commence for another 12 to 18 months, meaning the industry will likely continue to face challenging trading conditions in the short term. Unfortunately, we are once again seeing increases in the cost of both timber and hardware. Much of this is being driven by ongoing conflict in the Middle East, where higher oil prices have increased freight, manufacturing, and transportation costs, placing upward pressure on raw material prices around the world. As a result, manufacturers continue to face rising input costs, many of which are becoming increasingly difficult to absorb in an already highly competitive market. Saying that it’s positive to hear from some suppliers that inquiries are on the rise across all joinery sectors, signalling a positive shift in demand.

This increase in interest, coupled with similar feedback from larger timber and hardware suppliers, suggests that the industry might be heading towards a more stable period. It’s encouraging to see these positive indicators after the challenges faced by various sectors, and hopefully, this trend continues to bring more opportunities and growth. I look forward to our next Master Joiners meeting in August, which will be hosted by HAFELE. It will be a great opportunity to catch up with fellow members and associates, share industry insights, and discuss the challenges and opportunities ahead. in their well-appointed showroom. Rob Pickup Total Timba Joinery CANTERBURY Hello fellow joiners.The winter season is upon us which means we are over halfway through the year, and the books will be starting to ﬁll for the year. A time when clients are sitting at home, stuck inside, so they start looking at what they can do around the home – maybe a new kitchen will be their next project, or maybe even a new walkin wardrobe. All we know is that this will create the next big push to Christmas, so be prepared as the rush won’t be far away, or possibly already begun. Our monthly meeting is held at the Blum Showroom in Christchurch where a mix of joiners and suppliers come together. Dinner for those who wish to partake prior to the meeting for a social chat and food. The meetings start at 7pm sharp, generally with an average of 25 participants. Meetings tend to include but are not limited to H&S, general business, apprentices, workloads, tip and tricks, suppliers, guest speakers etc so if you have been on the fence and wonder what the meetings are all about, please do feel free to reach out and come along even if its just for a social chat. Meetings are the ﬁrst Tuesday of each month except for January, November and December. With the chat around the table, the work loads in the area are positive

JOINERS Magazine September 2026 page 78

with not much sign of slowing down. Quoting seems a bit quieter than usual, however consistent through the canterbury region.

years dates, usually in the month of July. Special thanks to Ian Harris for organising this event – it was enjoyed by all who attended.

Conference at the Millbrook Resort was a great success, bringing together industry professionals for valuable networking, insightful presentations, and engaging discussions.

Enough from me, keep ya blades sharp, extraction on and look after yourselves!

An action-packed day on the Friday with guest speakers ﬁlling our plates with a lot of information on legal, supplies, success stories, and the assembly, giving time for joiners to express their challenges, whether they be wins, losses, or concerns. I’m sure plenty of information was taken away from this day.

CENTRAL

The Friday night featured an entertaining quiz night, giving delegates the chance to unwind, enjoy some friendly competition, and strengthen connections in a relaxed atmosphere. The Awards Night was a standout event located at the stunning winehouse alongside the Kawarau George. The guest speaker was fantastic and grabbed the audience making a lasting impression on attendees. A great band provided excellent music for everyone to get out there and show there moves! Regarding the awards, the Canterbury region achieved an outstanding result by winning 13 awards in total. MWF led the way with an exceptional performance, taking out 7 of the 8 Apprentice Awards, highlighting the strength of its apprenticeship programme and the dedication of its talented apprentices and mentors. A sincere thank you to our suppliers for their ongoing support and contribution to the conference. Your partnership plays an important role in the success of events like these, and your continued commitment to the joinery industry is greatly appreciated. We also recently had the annual Canterbury Master Joiners quiz night, with 9 teams with a variety of knowledge from young and old. This evening was held at The Elmwood Trading Co and was a great success. If you fancy yourself a quizzer or just keen for a social chat or drink, please keep an eye out for next

Graham Woodham Modern Age Kitchens & Joinery

It is time again to provide a snapshot of what is happening across the Central region. The market is showing cautious improvement, with commercial and industrial construction providing the strongest growth. In Palmerston North, non-residential building consent values increased by 55.8% over the previous year. Activity is being supported by logistics, warehousing, accommodation, healthcare, education and airportrelated developments. Residential construction remains comparatively weak. New dwelling consent numbers across Manawatū were down 5.1% in the year to April, and the market continues to be highly competitive and price-sensitive. As a result, more businesses are directing resources towards renovation, refurbishment and maintenance work. Workloads remain mixed. Some businesses are reporting healthy levels of work, while others continue to experience lower enquiry and order volumes. This variation may reﬂect the type of work each business is exposed to. The strongest near-term opportunities are likely to come from conﬁrmed commercial projects, industrial facilities, hospitality, healthcare, education and refurbishment work. On the social front, Master Joiners recently held its annual small-bore shooting event, with a strong turnout of more than 30 people. It was a great night, and it became clear that we have some keen shooters within the group—and a few who may ‘need a little more practice’. Thank you to Elite Hardware and Counter Concepts for sponsoring the event. These events would not be possible without the support of our associate members.

As current president, I also had the honour of joining Andrew Reilly, past president, and Allison Delainey, Chief Executive, in presenting Mark Pickford with the Owen Wright Memorial Trophy. It was a special occasion. Andrew spoke about his time as Mark’s apprentice at HR Jones, while Mark shared stories and reﬂected on the many roles he has held within the Master Joiners Federation over the years. Allison also spoke about Owen Wright— the man, the trophy and what they represent within Master Joiners. Mark knew Owen personally, which made receiving the award even more signiﬁcant. It was a privilege to recognise Mark’s contribution in this way.

reliable subcontract teams causing scheduling variability and margin pressure.

There are several more events in the pipeline, so keep an eye on the Master Joiners events calendar for upcoming dates and details.

Quotation lead times have extended modestly due to workload and material sourcing checks. There have been increasing pressure on quotes due to labour cost increases and selected material price volatility. Contractors are quoting more conservative contingency allowances for delays and supply risk. There has been greater preference for time-and-materials or staged pricing on larger/complex jobs to mitigate margin exposure.

Vaughn Tongs TweakIt Joinery Solutions WAIKATO – BAY OF PLENTY Overall, there is steady-to-strong activity across both regions driven by residential renovations, continued detached housing builds in growth corridors, and an uptick in commercial fit-outs (hospitality, light retail, education). Membership growth and apprentice engagement indicate healthy sector renewal and sustained demand for qualified joinery trades. Wa i k a t o : H i g h w o r k l o a d i n residential renovations and new-build subdivisions around Hamilton and satellite towns. Increased demand for bespoke kitchens, joinery for multi-unit developments, and engineered timber components for truss/frames. Peak periods aligned with spring– autumn building seasons with some firms reporting capacity constraints. Bay of Plenty: Mixed workload. Tauranga sees strong renovation and medium-density apartment work; Western Bay and Rotorua show steady regional housing and holidayhome projects. Seasonal tourismrelated refurbishments are adding short-term spikes in workload. Skilled joiners and qualified CNC operators remain in short supply across both regions. Competition from construction trades and larger manufacturing operations is intense. There are positive signs with increases in apprenticeship starts, especially in Waikato. However, completion rates and retention beyond qualification remain areas to monitor. Pressures have been seen around rising wages for experienced joiners and difficulty accessing

There has been growing adoption of offsite-manufactured panels and pre-fitted joinery to speed onsite assembly and reduce labour exposure. More small-to-medium shops are investing in mid-range CNC routers and software to boost repeatability and reduce lead times. Clients and builders increasingly request joinery designed for efficient manufacture and installation (standardisation, reduced site finishing). There has been higher demand for low-VOC finishes, certified timber, and recyclable materials, driven by specifiers and homeowner preference.

Generally stable for common joinery materials, but intermittent shortages/delays for specific hardware, specialty timber proﬁles, and some imported fittings. Shipping lead times can affect bespoke components. There has been increased interest in NZsourced and certified timbers to reduce import risk; building stronger relationships with regional suppliers. Rising freight and distribution costs continue to be factored into quotes; bulk ordering and consolidated deliveries being used to control costs. There has been an increase in new Master Joiners membership applications suggesting strong engagement, healthy business confidence, and effective local outreach. Apprenticeship enrolments are also increasing, and the branch networking and training uptake is high. There is demand for short upskilling courses (CNC programming, project estimating, business systems) across both regions. The main risks remain ongoing labour shortages, sporadic supply chain disruptions for niche items, and margin squeeze from rising input costs. There is a potential risk of lower activity if interest rates or broader housing market weakens. Jared Monk Montage Group

WAITAKI The year is just flying by, hard to think it is July already. Our members are seeing a varied workload with some very busy and some a bit quiet. A few aren’t seeing the plans in their areas, and some have plenty inquiry. Generally, there is a lot of building going on which will mean everyone’s workloads will increase. Qualified staff are still hard to get, and companies are now looking at training in house with a few apprentices being taken on. In general material supplies have been OK but a few sink bowl types and Laminate colours have been out of stock but there are plenty of alternatives to fill the gaps. The surcharges on accounts are having to be absorbed by many, which means lower margin in an already competitive environment. It’s interesting how these have been calculated by suppliers as some are a lot higher than others. We hope that these don’t become the new norm. Customers are being a bit more careful with there spending and many seeking two or three quotes before committing to their projects. Generally, people are paying on time. With only five months left till Christmas I’m sure all our members will have good workloads leading into the busy time of the year. Mark Mitchell Barrett Joinery WELLINGTON The year is racing by, and Christmas already seems to be looming on the horizon. The weather in Wellington, like much of New Zealand, has been particularly challenging over the past few months. We’ve had almost constant rain, along with several significant weather events that have brought flooding and widespread property damage. As a result, there has been a noticeable increase in insurance work, including flooddamaged kitchen replacements and the repair or replacement of sashes and doors torn out by high winds. Unfortunately, we had to cancel our June meeting due to one of these weather events, which was disappointing. However, we have rescheduled it for later in July and look forward to catching up with our fellow legends then. Our next meeting will then be held in August, when we’ll head over to Carterton to tour the new ITI warehouse. It should be a great outing, and we’re hoping to see more of our Wairarapa members join us.

Workload across the Wellington region continues to be a mixed bag. I often feel like I’m writing the same thing in these reports some members are exceptionally busy, while others are extremely quiet. That’s simply the reality of the market at the moment. I speak with some businesses that have months of confirmed work ahead of them, while others have only one or two weeks booked. We can only hope that as we move through the remainder of 2026 and into 2027, we start to see some positive, sustained improvement in the market. Election years have traditionally slowed activity in Wellington, although there have been some encouraging building consent figures recently. Hopefully, that’s an early sign that the market is beginning to turn. Finding skilled joiners remains as difficult as ever - virtually impossible. I continue to encourage members to invest in training new people and growing their own teams from within. We currently have three apprentices, with a fourth joining us in the coming weeks. In our experience, training our own apprentices is the most reliable way to develop skilled tradespeople for the future. Quoting activity remains consistently steady, with plenty of enquiries still coming through. People clearly want work done, but many are taking the time to shop around for the best value in the current market. My view is that there is always work available, but the challenge is resisting the temptation to chase every job if it means competing solely on price. Staying busy often leads to better opportunities through referrals and word of mouth, so finding the right balance is important. At present, I’m not aware of any significant supply chain issues affecting our members. There has been discussion around suppliers reducing fuel levies now that petrol prices have eased somewhat. It’s encouraging to see some companies adjusting their fuel surcharges in line with market conditions, and it would be good to see more businesses follow suit. Stephen Fairbrass Well Hung Joinery

JOINERS Magazine September 2026 page 79

accounts@masterjoiners.co.nz Chief Executive - Allison Delaney, PO Box 12322, Thorndon, Wellington 6011. p: 04 471 1133, e: support@masterjoiners.co.nz, support

AUCKLAND Advanced Timber Joinery 217 Spur Road, Silverdale, 0993. Ph 09 426 9785, contact Wade Saunderson. NZS4211 Affiliated. All Timber Joinery (2017) Ltd Unit A, 1058 Great South Road, Otahuhu, Auckland, 1061. Ph 09 270 9605, contact Rory Johns. NZS4211 Affiliated. Alpha Joinery Services (2010) Ltd 124D Felton Mathew Ave, St Johns, Auckland, 1072. Ph 09 578 0391, contact Juan Whippy. NZS4211 Affiliated. Art Deco Interior Ltd 6 Grayson Avenue, Papatoetoe 2104, ph 09 218 8079, contact Sam Ju. Auckland Joinery (2014) Ltd 2 Taylors Road, Morningside, Auckland, 1025. Ph 09 846 0346, contact Ross Webster. NZS4211 Affiliated. BML Builders Ltd 18 Shamrock Drive, Kumeu, 0810. Ph 09 412 2350, contact Kaye Butler. NZS4211 Affiliated. Buildcraft Group Ltd 6 Ron Driver Place, East Tamaki, Auckland, 2013. Ph 09 272 8252, contact Sean Soo. Canam Joinery Ltd 196 Swanson Rd, Henderson, Auckland 0610. Ph 09 836 3069, contact Nick Braithwaite. Carlielle Kitchens 138 Manukau Road, Pukekohe, 2120. Ph 09 238 5222, contact Doug McMiken. Cedarlite Industries Ltd 4 Mahunga Dr, Mangere Bridge, Auckland 2022. Ph 09 633 0410, contact John Harrison. NZS4211 Affiliated. Comfort Joinery Ltd 3/12 Neilpark Drive, East Tamaki, Auckland 2013. Ph 021 654 984, contact Manoj Kumar. Continental Stairs Ltd 32 Waipareira Ave, Henderson, Auckland, 0610. Ph 09 836 1935, contact Anthony van Erp.

Cutting Edge Cabinetry Ltd 189B Manukau Rd, Pukekohe, 1023. Ph 09 238 5090, contact William Haverland.

Kitchen Dynamics Limited 17 Martyn St, Waiuku, 2123. Ph 09 235 0252, contact Colin Drummond.

Cutting Innovations Ltd 70 The Concourse, Henderson, Auckland 0610, Ph 09 836 9050, contact Alec Stringer

Legacy Joinery 120 Captain Springs Road, Onehunga, Auckland 1061. Ph 09 250 2150, contact Graham O”Neill. NZS4211 Affiliated.

Dando Doors and Windows Ltd 62 Stoddard Rd, Wesley, Auckland, 1041. Ph 09 629 0222, contact Aaron Dando. NZS4211 Affiliated. Danska Cabinetmaking Unit 5, 56 Rewarewa Rd, Raumanga, Whangarei, 0110. Ph 09 438 1100, contact Carolyn Rawson. Design Timber Doors & Windows 125 Markham Rd, Ararimu 2579. Ph 021 0868 6770, contact Sailesh Prakash. NZS4211 Affiliated. Divine Design Ltd (T/A JDC Cabinets) 14 Alfred St, Onehunga, Auckland 1061. ph 09 622 1912, contact Julie Todd. Euro Timber Joinery Co Ltd 34 Waipareira Ave, Henderson, Auckland, 0610. Ph 09 837 1833, contact Shane Paterson. NZS4211 Affiliated. F&R Home Improvements 79 Ellice Rd, Wairau Valley, Auckland, 0629. Ph 09 944 4962, contact Frank Ren. Fabulous Kitchens 52 Rangi Rd, Takanini, Auckland. Ph 09 268 2299, contact Ming Feng. Fineline Joinery Limited 4 Corban Avenue, Henderson, Auckland, Ph 09 836 2212, contact Richard Schaefer. NZS4211 Affiliated. G & J Joinery (1997) Limited 372 West Coast Road, Glen Eden, Auckland 0602. Ph. 09 818 5585, contact Allan Parry. NZS4211 Affiliated. Geoﬀ Locke Cabinetmaker Ltd 67 Hodge Road, Ruatangata West 0176. Ph 09 433 5745, contact Geoff Locke.

Leslie A J & Co Ltd 6/95 Ellice Rd, Wairau Valley, Auckland. Ph 09 479 4662, contact Steve Leslie. NZS4211 Affiliated. Mahurangi Joinery Ltd 23a Glenmore Drive, Warkworth, Auckland 0910, Ph 09 425 9849, contacts Joel and Suzannah Hemus. NZS4211 Affiliated. Matakana Kitchens & Joinery Ltd 50 Matakana Valley Road, Matakana, Ph 09 422 7804, contact Jeffrey Smith. NZS4211 Affiliated. McNaughton Windows and Doors 42 Frost Rd, Mt Roskill, Auckland. Ph 09 620 9059, contact Dave Cunningham. NZS4211 Affiliated. Neo Design Ltd 96 Hillside Road, Glenfield, Auckland. Ph 09 443 4461, contact Wayne Church. Next Level Joinery Ltd 7 Goldfield, Wairau Valley, Auckland. Ph 09 600 2726, contact Brendon Sowerby. NZS4211 Affiliated. Nicks Timber Joinery Ltd 56 Forge Road, Silverdale, Auckland. Ph 09 426 6862, contact Ken Caldwell. NZS4211 Affiliated. Owairoa Joinery Ltd 9 Carpenter Rd, East Tamaki, Auckland. Ph 09 273 3699, contact Nigel Walker. NZS4211 Affiliated. Papakura Joinery Ltd 45-51 Tironui Road, Papakura North, Auckland, Ph 09 298 7145, contact Glenn Haszard. NZS4211 Affiliated.

Total Timba Joinery 227 Archers Rd, Glenfield, North Shore. Ph 09 444 7772 contact Rob Pickup. NZS4211 Affiliated. VSP Interiors Limited 36 Parkway Drive, Rosedale, Auckland, Ph 021 183 9151, contact Vishal Prasad. Wendekreisen Travel Ltd 6/197 Montgomerie Road, Mangere, Auckland, Ph 03 489 6507, contact Sascha Warnken. Westpine Joinery Ltd 7 Binstead Rd, New Lynn, Auckland. Ph 09 827 6488, contact Donny Rawlinson. NZS4211 Affiliated. Woodland Shopﬁtting 42a Ellice Road, Wairau Valley, Auckland 0629. Ph 09 222 3113, contact Brendan Sneddon. Wood Works NZ Ltd 18 Selwyn St, Onehunga, Auckland, 1061. Ph 021 150 5710, contact Serge Landry.

WAIKATO BAY OF PLENTY Advance Joinery 2015 Ltd 49 Farnborough Drive, Nawton, Hamilton 3200. Ph 07 846 0026, contact Kris Allen. Artisan Carpentry Ltd 747 No 2 Road, Te Ranga 3182. Ph 027 344 1918, contact Charles de Lapomarede Autocrat Joinery 31 Maru Street, Mount Maunganui, Ph 07 574 8162, contact Steve O’Donohoe. NZS4211 Affiliated. Baker Joinery Ltd 46 Johnston Street, Waihi, contact Mike Forsyth, mob 020 4092 9555. Cabinet Queen Ohaupo Road, Hamilton 3206, contact Alisha Campbell mob 021 050 0104.

Grandvue Joinery 42 Gregory Road, Waitakere. Ph 09 810 9398, contact Robert Piacun. NZS4211 Affiliated.

Popular Cabinets Ltd (T/A Popular Kitchens), 12 Rylock Plc, Papakura Heights, Auckland, 2010, ph 09 576 6358, contact Sherry Shi.

Classical Doors Ltd Cnr Chadwick Rd & Sherson St, Tauranga, Ph 07 578 4908, contact Scott Wilkins. NZS4211 Affiliated.

Haydn & Rollett Ltd 62 Diana Drive, Wairau Valley, Auckland 0627. Ph 09 443 8315, contact Craig McGuigan.

Regal Plus Joinery Ltd 35 Commerce Street, Whangarei, Ph 09 438 2989, contact Jason Hammond.

CM Joinery Ltd 201 Bowman Rd, Whatawhata 3289. Contact Craig Mackie, 022 585 6788.

Craft Developments Ltd 65E Crooks Road, East Tamaki Auckland, 2013. Ph 09 272 8266, contact Terry Diao.

Heritage Joinery Ltd 1007 Paerata Road, Paerata, 2676. Ph 09 239 2794, contact Michael Oglesby.

Rockﬁeld Woodworkers (2003) Ltd 9 Parkwood Place, East Tamaki, Auckland 2013. Ph 09 274 4698, contact Bryan Hancock. NZS4211 Affiliated.

Concept Kitchens & Bathrooms Ltd 73 Riverlea Rd, Hamilton, Ph 07 856 4705, contact Ross Bones.

Craftsman Cabinets Ltd 140 Patumahoe Rd, Pukekohe, 2678. Ph 021 225 3460, contact Jason Michie.

Hewe Architectural Cabinetry 10 Triton Drive, Albany, Auckland 0632, Ph 09 479 6504, contact Tony Hewetson.

CT Timber Joinery Ltd 42 View Rd, Wairau Valley, Auckland, 0627. Ph 09 444 9041, contact Geoff Knight. NZS4211 Affiliated.

Inspire Design Limited 5B Volkner Place, Rosedale, Auckland 0632, ph 022 169 9136, contact Aaron Dykstra.

Counties Joinery 36 Sedgebrook Rd, Patumahoe, 2678. Ph 09 236 3271, contact Roy McKerras. NZS4211 Affiliated.

Kay Joinery 1226 Oruru Road, Peria, Kaitaia, Ph 09 408 5547, contact Daniel Kay. NZS4211 Affiliated.

JOINERS Magazine September 2026 page pag ge 80

Smith & Parker Joiners 35 Waipanga Road, Kamo, Whangarei 0112. Ph 09 435 5415, contact Albert Smith. NZS4211 Affiliated. Southey and Knight Group Ltd 258a Roscommon Rd, Wiri, Auckland. Ph 022 455 9975, contact Ryan Southey. NZS4211 Affiliated.

Cromptons Joinery & Laminates 13 Miro Street, Tauhara, Taupo 3378. Ph 07 378 7968, contact Allan Crompton. NZS4211 Affiliated. Customtone Kitchens 33 Progress Drive, Otorohanga, Ph 07 873 8083, contact George van Boven.

National Associate Members Designline Limited 4/21 Gateway Drive, Coastlands 3120. Ph 07 307 0058, contact Hayden Boyd. Fine Woodworking 1536 State Highway 3, Te Kuiti, 3985. Ph 07 878 6194, contact David Higgins. NZS4211 Affiliated. Gartshore Group 211 Taurikura Dr, Tauriko, Tauranga. Ph 07 578 4529, contact Rob Gartshore. NZS4211 Affiliated. Got It Made Kitchens & Cabinetry 360 Rickit Road, Te Awamutu 3800. Ph 07 871 3998, contact Cherie van Der Poel. Graft Joinery Ltd 32 Raywood Cres, Taupo 3033. Ph 07 378 8340, contact Craig van Velden. Hamilton Laminates 58 Bryant Road, Te Rapa, Hamilton, Ph 07 849 7745, contact Steve Harker. HK Kitchens Ltd 144 Taurikura Drive, Tauriko, Tauranga, Ph 07 578 6361, contact Matt Olsen. Hopkins Joinery 126 Taupo St, Putaruru. Ph 07 883 7951, contact Ron Hopkins. NZS4211 Affiliated. Hostess Joinery Ltd 17 Sunshine Ave, Te Rapa, Hamilton, Ph 07 847 3099, contact Bevan Muollo. Huntly Door Systems Ltd 22-26 Glasgow St, Huntly, Ph 027 242 3565, contact Shaun Hoskin. Huntly Joinery 2000 Ltd 22-26 Glasgow St, Huntly, Ph 07 902 5250, contact Simon Curran. NZS4211 Affiliated. Interior Fittings Ltd 23 White St, Rotorua 3010, Ph 07 348 1041, contact Josh Anderson. Keith Paton Joinery 2021 Ltd 15 Carters Crescent, Cambridge, ph 07 827 3249, contact Jamie Harding.

MGK Kitchens 2 Lake Rd, Frankton, Hamilton, Ph 07 847 4563, contact Michael Kenyon.

Advanced Engineering Services www.aesparts.co.nz

Montage Kitchens & Joinery 121 Ellis St, Frankton, Hamilton. Ph 07 847 9174, contact Jared Monk. NZS4211 Affiliated.

AGB Stone www.agbstone.co.nz

Morrinsville Industries Ltd 11-13 Bank St, Morrinsville. Ph 07 889 5199, contact Murray Foster. NZS4211 Affiliated. Native Timber Joinery Ltd 92 Bruce Berquist Drive, Te Awamutu, Ph 07 871 6188, contact Stuart Walker. NZS4211 Affiliated. Paciﬁc Coast Kitchens NZ Ltd 471 Omokoroa Road, R D 2, Tauranga, Ph 07 548 0606, contact Eric Thompson. Paton Kitchens & Joinery Ltd 33 Kohunui Street, Ngatea 3503. Ph 027 289 6054, contact Malcolm Paton. Precision Woodworks Ltd 5 Snowden Place, Raglan 3225. Ph 022 469 9152, contact David Groat. SMJ Ltd 49A Matai Street, Taupo. Ph 07 378 8049, contact Stu Martin. Thames Joinery (1995) Ltd 913 Queen Street, Thames, Ph 07 868 6951, contact Bruce Fulton. The Good Joiner 18 Killegray Close. Hamilton 3210. Contact Ian Megchelse 021 056 1487. The Kitchen Tailor 58b Herbert Rd, Queenwood, Hamilton. Contact Adam McNeil 0274 481 879. Torrington Stairways 24 Matos Segedin Drive, Cambridge, Ph 07 827 6323, contact Brian Courtney. Treetown Kitchens Ltd 57 Albert Street, Cambridge, Ph 07 827 7309, contact Kevin Middlemiss.

Allegion (New Zealand) Ltd www.allegion.co.nz Architectural Hardware Supplies www.ahs.co.nz Astro Pine NZ Ltd www.astropine.co.nz Austaron Surfaces www.austaronsurfaces.com Bates Surface Solutions www.batessurfaces.co.nz BBS Timbers www.bbstimbers.co.nz Biesse Group New Zealand www.biessenewzealand.co.nz Blum NZ Ltd www.blum.com Carters www.carters.co.nz Daiken New Zealand Ltd www.daiken-nz.com Drake & Wrigley Ltd www.drakeandwrigley.co.nz Enko Group Ltd www.enkogroup.com

FIT NZ www.ﬁt-nz.co.nz

Machines ‘R’ Us Ltd www.machinesrus.co.nz Miles Nelson MF Co Ltd www.milesnelson.co.nz Mirotone NZ Ltd www.mirotone.com Mulford NZ Delivering Solutions www.mulford.co.nz Nelson Pine Industries Ltd www.nelsonpine.co.nz New Zealand Panels Group www.nzpanels.co.nz

polytec www.polytec.co.nz Rehau Limited www.rehau.com/au-en Resene Paints Ltd www.resene.co.nz

Steelfort Engineering Ltd www.steelfort.co.nz

Glass Half Full www.glasshalﬀull.co.nz

Superior Doors Ltd www.superiordoors.co.nz

King & Co Joinery Limited 1370 Arthur Porter Drive, Hamilton 3200. Ph 04 473 6367, contact Russ King. King Country Kitchens 49 King St, Te Kuiti, Ph 07 878 8820, contact Richard Pethybridge. NZS4211 Affiliated.

Wackrow’s Joinery Ltd 17 Gillies St, Cambridge. Ph 07 827 5981, contact Liam Wackrow. NZS4211 Affiliated.

Harvey Norman Commercial www.harveynorman.co.nz

Kitchen Fx Ltd 801 Arthur Porter Dr, Burbush, Hamilton. Ph 07 849 2801, contact Mark Davies.

Waikato Benchtops Ltd 25 Glasgow Street, Huntly, Ph 07 902 5253, contact Simon Curran.

(Master Joiners membership continued overpage)

Leitz Tooling NZ Ltd www.leitz.co.nz

Southern Hospitality www.southernhospitality.co.nz

Häfele NZ Ltd www.hafele.co.nz

LPS Cabinetry Ltd 15 Harvey St, Taumarunui 3920. Ph 027 539 4702, contact Lewis Stewart

Laminex New Zealand www.laminexnewzealand.co.nz

Seearco Industrial Abrasives www.seearco.co.nz

Farnese NZ Ltd www.proformnz.com

Halswell Timber Co Ltd www.halswelltimber.co.nz

Henkel NZ Ltd www.henkel.com Hettich New Zealand www.hettich.co.nz Homag www.homag.com

Kantek www.kantek.co.nz

Panelform Ltd www.panelform.co.nz

TS Industries Ltd t/a Fernlea Cabinetry & Joinery Unit 3, 593 Te Rapa Road, Hamilton, Ph 027 505 3480, contact Stefan Brown. NZS4211 Affiliated.

Lee Brothers Cabinets & Joinery 120 View Rd, Rotorua, Ph 07 348 0620, contact Paul Ingram. NZS4211 Affiliated.

Joinery IT www.joineryit.co.nz

Thermawood www.thermawood.co.nz Unique Hardware Solutions Ltd www.uniquehardware.co.nz W & R Jack Ltd www.jacks.co.nz Woodman Hardware www.woodmannz.co.nz Wurth New Zealand Ltd www.wurth.co.nz

Innergy www.innergy.com ITI NZ www.iti.net.nz

JOINERS Magazine September 2026 page 81

CENTRAL AJL Joinery Limited 811 Makino Road, Halcombe 4777. Ph 021 024 4963, contact Adam Laker. Al-Wood Joinery (2019) Ltd 7 Arthur Street, Pahiatua, Ph 06 376 8692, contact Gus Shilvock. Benchtop Surfaces Ltd 590 Tremaine Ave, P. North. Ph 06 356 9384, contact James Hurren.

Unique Timber Joinery 143B Gillespies Line, RD 5, Palmerston North, Ph 06 355 2654, contact James Griffin. NZS4211 Affiliated. WDA Installations 23 Parrs Road, Bunnythorpe 4470. Ph 027 443 1541, contact Craig Buckley.

TARANAKI Broadway Joinery 381 Broadway, Stratford, Ph 06 765 6829, contact Graham Podjursky.

Counter Concepts 16 Bisley St, Palmerston North, ph 06 355 5971, contact Graeme Andrews.

Elite Kitchens 2004 Ltd 23 Oropuriri Road, New Plymouth 4312, Ph 06 759 8221, contact Sean Rice.

Craftbuilt 77 Hokio Beach Road, Levin 5510. Ph 06 368 0759, contact Simon Raikes.

Hawera Kitchens and Furniture Ltd 24 Glover Road, Hawera 4610, Ph 06 278 7044, contacts Klinton Hunt .

D-Mac Joinery Ltd 517 Lees Rd, RD5, Feilding, 4775, ph 027 457 0490, contact Drew McBride.

In 2 Kitchens Limited 78 Portia Street, Stratford, Ph 06 765 4058, contacts Brent Russ. NZS4211 Affiliated.

Gourmet Wood Inc. Limited 463 Arapaepae Road South, Ohau 5570. Ph 027 338 4790, contact Jared Baillie.

Jones & Sandford Joinery Ltd 285 St Aubyn Street, New Plymouth, Ph 06 759 9251, contact Roger Jones.

H.R. Jones & Co. Ltd 60 Aorangi St, Feilding. Ph 06 323 4388, contact Mark Pickford. NZS4211 Affiliated.

KP Joinery Ltd 2 Dowding Place, Waitara. Ph 06 754 4726, contact Ken Parsons.

Interiors Ltd t/a Hansens 55 Bennett Street, Cloverlea, Palmerston North, ph 06 354 4181, contact Kate Jetley.

Maltby Fitouts 23 Peace Avenue, Moturoa, New Plymouth 4310, contact Andrew Maltby

Jeﬀ Clayton Joinery 42c Bennett Rd, Palmerston North. Ph 06 357 1736, contact Jeff Clayton.

Modex Kitchens 77B Hurlstone Drive, Waiwhakaiho, New Plymouth 4312, ph 027 521 8527, contact Fraser Hall.

Murray Judd Joinery Limited 25 Station Street, Woodville, Ph 06 376 5043, contact Murray Judd. NZS4211 Affiliated. Reilly Joinery 18A Parkview Ave, Feilding, Ph 06 323 3743, contact Andrew Reilly. NZS4211 Affiliated. Rob O’Keeﬀe Joinery Ltd 368 Heads Rd, Whanganui. Ph 06 344 5040, contact Rob O’Keeffe, NZS4211 Affiliated. SB Joinery Ltd 7 Albert Street, Pahiatua 4910, Ph 027 979 0368, contact Scott Beales.

Christie Builders & Joiners 11 Husheer Place, Onekawa, Napier, Ph 06 843 6676, contact Beck Christie. NZS4211 Affiliated. Classic Kitchens (1997) Ltd 8 Lipton Place, Onekawa, Napier. Ph 06 843 6500, contact Stuart McKenna.

Careys Joinery (1989) Ltd 7 Bowen St, Marton. Ph 06 327 7949, contact Shaun McDowell.

Mastercraft Kitchens By Healey 127 Keith St, Roslyn, Palmerston North, Ph 06 355 4646, contact Kristine Holmes.

Cherrywood Joinery Ltd 11 Potae Ave, Lytton West, Gisborne. Ph 06 868 0971, contact Matt Peters.

New Plymouth Joinery Ltd 10 Cody Place, New Plymouth. Ph 06 758 8580, contact Roger Paul. NZS4211 Affiliated. Newton Gordge Joinery 2016 Ltd 67 Breakwater Rd, New Plymouth. Ph 06 751 5065, contact Scott Dudley. NZS4211 Affiliated. Pace Modular 2021 Ltd 113 De Havilland Drive, Bell Block, New Plymouth. Ph 06 755 4012, contact Bryan Frank. Rhys Powell Joinery 7A Euclid Street, New Plymouth. Ph 06 753 3822, contact Rhys Powell. NZS4211 Affiliated.

CTC Joinery Ohiti Road, Hastings 4179. Ph 021 050 7388, contact Ryan McCarty. D Stevens Ltd 336 Childers Road, Gisborne, Ph 06 867 5700, contact Peter Stevens. NZS4211 Affiliated. Gallery Kitchens Ltd 4 Cadbury Rd, Napier. Email - admin@ gallerykitchens.co.nz, contact Sharon James. Gemco Trades Ltd 13 Martin Pl, Havelock North. Ph. 06 877 1204, contact Neil McKenzie. NZS4211 Affiliated. Green Joinery Ltd 30 Morris St, Napier, 4110. Ph 027 750 8603, contact Jae Green. Kakapo Joinery 2/19 Mersey Street, Pandora, Napier, Ph 021 0258 9617, contact Robin Holthusen McIndoe Kitchens 8 Carnegie Rd, Onekawa, Napier 4110. Ph 06 843 3880, contact Duane Todd. MCL Joinery Ltd 19 Tumu Way, Longlands, Hastings, Ph 06 876 0252, contact Philip Mitchell. NZS4211 Affiliated. Molloy Joinery Ltd 14-16 Husheer Pl, Onekawa, Napier. Ph 06 843 5037, contact Simon Molloy. NZS4211 Affiliated. Natural Edge Joinery 174 Brookvale Road, Havelock North 4130. Ph 027 232 8838, contact James Coutts. Parkhill Joinery (Brittan Builders Ltd) 813B Caroline Road, Hastings 4122. Ph 06 877 7623, contact Shane O’Connor. Sunshine Joinery Ltd 1C Wakefield Street, Onekawa, Napier 4110. Ph 06 844 6105, contact Rick Martin Waipukurau Joinery Limited 2322 Takapau Road, Waipukurau. Ph 06 858 9961, contact Greg O’Kane.

The Joiner Leighton Judd Ltd 50 Johnston Street, Foxton, Manawatu, Ph 06 363 5119, contact Leighton Judd Townshends Joinery 2024 Limited 59 Makomako Rd, Palmerston North. Ph 06 354 6699, contact Livvy Kendrick. NZS4211 Affiliated. Tweakit Joinery Solutions 439 Tremaine Avenue, Takaro, Palmerston North 4412. Ph 06 357 2897, contact Vaughn Tongs. UCOL 18 Princess St, Palmerston North. Ph 06 952 7001, contact Richard Morris. NZS4211 Affiliated.

HAWKES BAY POVERTY BAY Alexander Joinery Ltd 72 Thames St, Pandora, Napier 4110. Ph 06 843 2938, contact Jason Collins. Awapuni Joinery Ltd 22 Parkinson Street, Gisborne, Ph 06 867 3301 contact Peter Webster. Burley Kitchens & Cabinetry Ltd 14 Lipton Pl, Onekawa, Napier. Ph 06 843 5588, contact Craig Burley.

JOINERS NERS Magazine Sep September ptem ember 2026 page 82

WELLINGTON

Crown Joinery (2002) Ltd 37 Burden Avenue, Wainuiomata, Lower Hutt 5014. Ph 04 564 8895, contact Ron & Jeremy Patmore. David Barker Custom Cabinets 52 Cooper St, Karori, Wellington, Ph 027 248 8140, contact David Barker. NZS 4211 Affiliated. Ferndale Furniture 67 Seaview Rd, Lower Hutt, Ph 04 568 7879, contact Grant MacDonald. Goldmark Group Ltd 9-11 Jean Batten St, Kilbirnie, Wellington. Ph 04 387 8964, contact Jay Goldsack. Interbuild Commercial Interiors Ltd 115 George St, Stokes Valley, Lower Hutt 5010, Ph 04 939 8760, contact Neil Shackleton. Jacobson Joinery Services 101 Brooklyn Rd, Carterton, Wairarapa 5713. Ph 06 379 8066, contact Vic Jacobson. James Cook Joinery 6 Victoria Street, Alicetown, Lower Hutt 5010. Ph 04 569 5558, contact Michael Telfer. Joinery Productions Ltd 457 Jackson Street, Petone, Ph 04 569 8808, contact Wayne Wilmshurst. NZS4211 Affiliated. Ladd Joinery Limited 19 Broken Hill Road, Kenepuru, Porirua 5022. Ph 04 237 9175, contact David Ladd. Living Timber European Joinery & Furniture Ltd 64 Fisk Street, Naenae, Lower Hutt, Ph 04 567 2577, contact Horst Mundt. NZS4211 Affiliated. M B Brown Ltd 67 Ngaumutawa Rd, Masterton, Wairarapa. Ph 027 538 8154, contact Jamie Searle. Maycroft Construction Ltd 16 Gregory Street, Lower Hutt, Ph 04 567 0014, contact Andrew Ashkettle. Maymorn Joiners Ltd 247 Parkes Line Rd, Upper Hutt, Ph 04 526 6657, contact Anthony Neustroski. NZS4211 Affiliated. My Joiner Ltd 64 Ruskin Rd, Newlands, Wellington 6037. Ph 021 487 500, contact Ulrich Kohler. NZ Cabinetmaker Ltd 39 Park St, Kingsley Heights, Upper Hutt, 5019, Ph 021 923 231, contact Benn Hamilton. Orchard Joinery Ltd 14-18 Te Roto Drive, Paraparaumu, Ph 04 298 3380, contact Geoff Orchard. NZS4211 Affiliated. Paraparaumu Doors & Joinery 14 Manchester St, Paraparaumu, Ph 04 297 2233, contact Adam Thomson. NZS4211 Affiliated.

Ace Kitchens & Laminates Ltd 50 Montgomery Crescent, Clouston Park, Upper Hutt 5018, Ph 04 526 9795, contact Ivan Johnson

Pete’s Joinery & Building Ltd 205 Main St, Greytown. Ph 06 304 9137, contact Peter Algie. NZS4211 Affiliated.

Carroll’s Joinery Limited 148 Lincoln Road, Masterton. Ph 06 377 3160, contact Richard Carroll.

Prestige Joinery Limited 140 Perry Street, Masterton, Ph 06 377 1331, contact Gregory Morgan. NZS4211 Affiliated.

Commercial Joinery Wellington Ltd 85 Adelaide Road, Mount Cook, Wellington 6021. Ph 04 387 2050, contact Grant Smith

Redwood Kitchens 40a Main Rd, Tawa, Wellington. Ph 027 8855 441, contact Keith Hollow.

Renalls Joinery Limited 150 Main Street, Greytown 5712. Ph 06 379 8008, contact Trevor Kenavan. NZS4211 Affiliated. Stylish Interiors Ltd 29D Dragon St, Granada North, Wellington. Ph 04 473 1944, contact Mathew Gubb. NZS4211 Affiliated. The English Craftsman 4 Mountbatten Grove, Upper Hutt 5018, contact Paul Winstanley 021 103 6683. The French Door Factory 14A Kingsford Smith Street, Rongotai, Wellington. Ph 04 387 7822, contact Alan Chambers. The French Door Store 3 Muhunoa West Road, Ohau 5570. Ph 0274 418 934, contact Tod Aitken. Wainui Joinery (1977) Ltd 34 Burden Ave, Wainuiomata Lower Hutt. Ph 04 564 7011, contact Nikki Wynne. NZS4211 Affiliated.

Nazareth Joinery 2017 Ltd 1 Warwick Street, Mayfield, Blenheim, 7201. Ph 03 578 8752, contact Leigh Jones.

Creative Joinery Ltd Unit 1/ 7 Homersham Pl., Burnside. Ph 03 358 4900, contact Wayne Brown.

Orange Building Group Joinery Ltd 16 Nayland Road, Stoke, Nelson. Ph 03 547 9784, contact John Andrew.

Don’s Joinery Ltd 43 Sandown Cres, Christchurch. Ph 03 382 0828, contact Don McClintock.

Prestige Furniture & Joinery Ltd 38 Beach Road, Richmond, Nelson, Ph 03 544 1789, contact Richard Dohmen.

Douglas Furniture Ltd 59 Halwyn Drive, Hei Hei, Christchurch 8042. Ph 03 366 1257, contact: Howard Nossiter.

Re Space Limited 2 Kidson Place, Stoke, Nelson 7011, Ph 03 547 1636, contact Hamish Northcott.

Elite Joinery Ltd 8 Holt Place, Burnside, Christchurch 8053. Ph 03 354 8311, contact Hayden & Sarah Illingworth.

Ruby Bay Joinery Ltd 8 Warren Plc, Mapua, Nelson. ph 03 540 2123 contact Wayne Roberts. NZS4211 Affiliated. Viking Furniture & Joinery Ltd 86 Vanguard Street, Nelson, ph 03 548 0493, contact Eugen Grab. NZS4211 Affiliated. Waimea West Joinery Ltd 111 Beach Road, Richmond, Nelson, Ph 03 544 0177, contact Alan Gibbs. NZS4211 Affiliated.

Well Hung Joinery 21 Lower Tyers Road, Ngauranga, Wellington, Ph 04 494 7230, contact Stephen Fairbrass. NZS4211 Affiliated. Woodworkshop Limited 8 Sar Street, Pipitea, Wellington 6035. Ph 027 407 6911, contact Steve Hind.

A K Joinery Ltd 32 Dublin Street, Picton 7220. Ph 03 573 6860, contact Andrew Kenny. Bays Joinery Ltd 6 Tokomaru Place, Wakatu Industrial Estate, Stoke, Nelson, Ph 03 544 0087, contact George Molnar. NZS4211 Affiliated. Brightwater Cabinetmaker & Joinery Ltd 8c Merton Place, Annesbrook, Nelson 7011, Ph 03 548 6400, contact Ben Knight. Building Connexion Ltd ITM Joinery 7/750 Lower Queen Street, Richmond 7020. Ph 03 528 7256, contact Paul Rusbatch. NZS4211 Affiliated. Cantwell Joinery & Window Centre 15 Bristol Street, Riverlands, Blenheim, Ph 03 578 3375, contact Wendie Cantwell. Complete Kitchens Ltd 415 Main Road, Spring Grove, Wakefield, Ph 03 539 0055, contact Hamish Drummond.

Finesse Joinery 423 Main North Road, Christchurch. Ph 03 352 3457, contact David Street. Hagley Kitchens 12 Nazareth Ave, Middleton, Christchurch. Ph 03 961 0703, contact Nathan Moore. Haspert Joinery Ltd 95B Main South Rd, Sockburn, Christchurch. Ph 021 031 2666, contact Allan Zhu.

CANTERBURY Adrian Harris Woodcraft Unit J, 3 Timothy Place, Wigram, Christchurch 8042, Ph 03 348 6996, contact Adrian Harris. NZS4211 Affiliated.

NELSON MARLBOROUGH

Evolution Interiors Limited 309 Brougham Street, Sydenham, Christchurch 8023. Ph 03 381 1633, contact Karl Kitchingham.

Advanced Joinery 2024 Ltd 22 Avenger Crescent, Wigram, Christchurch 8042. Ph 03 348 7700, contact Darrin Dudson. NZS4211 Affiliated. Alsop Joinery Ltd 18 Alloy Street, Sockburn, Christchurch, Ph 03 348 4666, contact Paul Baker. NZS4211 Affiliated. Anderson Joinery Ltd 247 Alford Forest Rd, Ashburton. Ph 03 308 2988, contact Dougal Anderson. Architectural Joinery Ltd 82 Buchan Street, Sydenham, Christchurch. Ph 03 377 6760, contact Andrew Clark Ashburton Joinery Limited 8 John Street, Ashburton, Ph 03 308 5059, contact James Donaldson. NZS4211 Affiliated. Bates Joinery (2008) Ltd 101 Shortland Street, Christchurch 8061, Ph 03 388 8111, contact Mark Allworthy. NZS4211 Affiliated. Bower Joinery 12a Bower Ave, Christchurch. Ph 03 388 2924, contact John Mudgway.

Cooper Webley (2006) Ltd 64 Beatty Street, Tahunanui, Nelson, Ph 03 547 0010, contact Noel Tait.

Brent Johnson Joinery Ltd 306 Flaxton Road, Rangiora, North Canterbury. Ph 03 313 6256, contact Brent Johnson. NZS4211 Affiliated.

James Neal Joinery 35 Fell Street, Grovetown, Blenheim. Ph 03 577 7872, contact James Neal.

Busch Joinery Limited 1737 Boundary Road, R D 3, Ashburton, Ph 027 563 4537, contact Nathan Busch

Motueka Joinery Co 2001 Ltd 20 Old Wharf Road, Motueka, Ph 03 528 9012, contacts Phil Sharkie.

Comfort Kitchens Ltd 29 Blakes Road, Belfast, Christchurch 8051. Ph 03 365 7705, contact Anita Gilchrist.

Homeview Building Products Ltd 772 Halswell Junction Rd, Hornby, Christchurch. Ph 03 343 9949, contact Howard Stone. NZS4211 Affiliated. House of Joinery 168 Voss Rd, Ladbrooks RD2, Canterbury 7672, Ph 021 955 959, contact Johnny Alsop. Joinery by Design 15 King Edward Tce, Woolston, Christchurch. Ph 03 384 8461, contact Evan McLachlan. NZS4211 Affiliated. Joinery Concepts 2006 Ltd 25 Osbourne Street, Waltham, Christchurch, Ph 0274 807 400, contact Peter Robertson. Joinery Scene Ltd 43 Sonter Rd, Wigram, Christchurch. Contact Richard Hill 021 623 446. Kitchen Maker Christchurch Ltd 39 Ballarat Way, Wigram, Christchurch, 8042. Ph 021 988 868, contact David Li. LX Joinery 39A Buchanans Road, Sockburn 8042, Christchurch, Ph 03 342 9605, contact Steve Mangan. NZS4211 Affiliated. Mackay Kitchens Ltd 345 Brougham Street, Sydenham, Christchurch 8023, Ph 03 365 3988, contact Chris Moore. MCM Furniture 185 Kirk Road, Templeton, Christchurch 7678, contact Robert Kulesza mob 027 334 4077. Modern Age Kitchens & Joinery Ltd 127 Montreal St, Sydenham, Christchurch 8023. Ph 03 365 1675 contact Graham Woodham. Murray Milne Ltd 64 Taits Road, Newland 7772. Ph 0274 327 617, contact Murray Milne. MWF Manufacturing Ltd Unit 3, 11 March Plc, Belfast, Christchurch. Ph 03 365 6218, contact Gary Altenburg. NZS4211 Affiliated.

NZ Doors (2004) Ltd 41 Anchorage Road, Hornby, Christchurch, Ph 03 344 2516, contacts Ron Zwarst. NZS4211 Affiliated. Paul Renwick Joinery Ltd 9 Paragon Place, Sockburn, Christchurch 8042. Ph 03 349 7049, contact Paul Renwick. PM Joinery Limited 1/21 Barton Street, Woolston, Christchurch 8023. Ph 03 399 3721, contact peter Cui. R A Hale (2022) Ltd 126 Hazeldean Rd, Addington, Christchurch. Ph 03 366 6909, contact Donald Bisphan. NZS4211 Affiliated. Ruben’s Joinery Limited 402 Bethels Road, 4 R D, Christchurch, Ph 03 329 5458, contact Ruben Patchett. NZS4211 Affiliated. Ryan’s Kitchens and Joinery 9 Kilronan Plc, Wigram, Christchurch 8042, Ph 03 348 7921, contact Ryan Butler. Silver Fern Kitchens 12 Princess St, Addington Christchurch. Ph 021 288 8373, contact Gary Lin. Sockburn Joinery 33 West Coast Rd, Yaldhurst, Christchurch. Ph 03 342 6044, contact Tony Lemmens. Sydenham Berspoke Joinery 6 Dalziel Pl, Woolston, Christchurch, Ph 03 379 6840, contact Grant Weston. NZS4211 Affiliated. The Joiner Shop 2024 Ltd 19 Beach Road, Kaikoura 7300, Ph 03 319 5562, contact Ash or Tania Hastelow. Timber Doors & Windows 2007 Ltd 194 Wordsworth Street, Sydenham, Christchurch 8023, Ph 03 379 1725, contact Martyn Neville. NZS4211 Affiliated. Timber Tru Ltd 411 Tuan St, Linwood, Christchurch, Ph 03 389 2986, contact Tony van der Plas. NZS4211 Affiliated. Trends Kitchens Ltd 34A Parkhouse Road, Sockburn, Christchurch, Ph 03 343 5242, contact James McKeown Woodshack Kitchens 113 Izone Drive, Rolleston, Canterbury 7614, Ph: 03 347 9790, contact Mark Davis.

WAITAKI Alpine Joinery 480 Fairview Road, Timaru 7972. ph 03 688 5748, contact Paul Butchers. Barrett Joinery Ltd 204 Hilton Highway, Timaru 7910. Ph 03 688 4738, contact Mark Mitchell. NZS4211 Affiliated. Duncan Joinery Limited 20 King Street, Temuka, South Canterbury, Ph 03 615 7327, contact Craig Duncan. Firman Joinery Ltd 10 Endeavour Cres, Nth Oamaru Business Park, Oamaru. Ph 03 434 1561, contact Gary Firman. NZS4211 Affiliated.

(Master Joiners membership continued overpage)

JOINERS Magazine S September 2026 page 83

Geraldine Timber Products 27 High Street, Geraldine, Ph 03 693 9598, contact Paul Autridge. NZS4211 Affiliated.

Kirk’s Joinery Limited 403 Kaikorai Valley Road, Bradford, Dunedin 9011. Ph 03 453 5718, contact Hayden Kirk.

WeCare 2026

J E Dennison Ltd 5 Redruth St, Timaru. Ph 03 688 0029, contact Brad Dennison. NZS4211 Affiliated.

Leading Edge Joinery Specialists Ltd 13 Surrey Street, Gore, Ph 027 6774 729, contact Donald McGuigan. NZS4211 Affiliated.

In 2026, employees of the Brucklacher Group from around the world once again took part in the annual WeCare action week, using their projects to send a strong message of responsibility, solidarity, and commitment.

JMAC Joinery Ltd 7 Laughton Street, Washdyke, Timaru, Ph 03 688 2725, contact Craig Mason. NZS4211 Affiliated.

Leith Joinery 2 Roberts St, Dunedin. Ph 03 477 0115, contact Peter Leith. NZS4211 Affiliated.

Joinery Zone 2012 Ltd 27 Redruth St, Timaru. Ph 03 688 8223, contact Warren Atwill. NZS4211 Affiliated.

Masterwood Joinery 2008 28 McNulty Road, Cromwell, Ph 03 445 0313, contact Dave Wilson. NZS4211 Affiliated.

LJT (previously Lunds Joinery Ltd) 33a Grants Rd, Timaru 7910. Ph 03 688 9149, contact Mark Albert. NZS4211 Affiliated.

Mearns and Leckie 2024 Limited 7 Gow St, Mosgiel 9024. Contact Michael Cookson 03 489 2024. NZS4211 Affiliated.

Paterson Joinery 307 Rosewill Valley Road, Timaru. Contact Matthew Valentine, ph 027 432 1422.

Mojo Modern Joinery Ltd 2 Walter Cres, Cromwell, Ph 03 445 0128, contact Craig Harrison.

Rycole Joinery 44 Homestead Road, Oamaru 9492. Ph 03 434 5012, contact Adrienne Whitburn. NZS4211 Affiliated.

Nasko Factory Ltd 22A Margaret Place, Frankton Industrial, Queenstown, Ph 03 442 3206, contacts Stephen Walak. NZS4211 Affiliated. Nigel Molloy Joinery Limited 300 Great North Road, Winton, Ph 03 236 0399, contact Nigel Molloy. NZS4211 Affiliated.

OTAGO SOUTHLAND Abernethy Joinery 18 Melbourne Street, Dunedin, Ph 03 456 1654, contact Ian Abernethy. NZS4211 Affiliated. B & M Joinery Ltd 4 Ree Crescent, Cromwell, Ph 027 207 8025, contact Brendon Munro. NZS4211 Affiliated. Coronet Woodware (2017) Ltd 99 Glenda Drive, Queenstown, Ph 03 442 3700, contact Colin Strang. NZS4211 Affiliated. Elite Joinery Solutions 54 Mersey Street, Gore 9710. Ph 03 208 5819, contact Regan Hughes. Fiordland Joinery 10 Caswell Rd, Te Anau, Southland 9600, Ph 03 249 4339, contact Simon Irwin.

(Photos: Leitz/Boehlerit/Bilz)

PDL Kitchens 450 Mill Road North, Roslyn Bush 9876. Ph 027 424 5578, contact Paul Lindsay. Queenstown Joinery 53 Industrial Place, Queenstown, Ph 03 442 7555, contact Kevin Harradine. NZS4211 Affiliated. Riversdale Joinery Ltd 105 Liverpool Street, Riversdale, Southland 9744, Ph 03 202 5527, Barry O’Connor. NZS4211 Affiliated. Steadfast Joinery Limited 41 Ward St, CBD, Dunedin 9016, Ph 03 470 1990, contact Anthony Van de Water.

School restroom facilities in India.

Stevenson & Williams Ltd Joinery 64 Prince Albert Rd, St Kilda, Dunedin. Ph 03 455 4034, contact Andrew Duncan. NZS4211 Affiliated. Stewart Construction Ltd 29 Fox Street, South Dunedin, Dunedin 9012. Ph 03 455 2057, contact Barry Taylor. NZS4211 Affiliated.

G L Stevenson Builders Ltd 53 Stone St, Dunedin 9010, Ph 027 7146 523, contact Graham Stevenson

Urban Woodwork LTD 10A Gow St, Mosgiel, Dunedin 9024. Ph 027 284 7030, contact Ben King.

Howley Joinery Ltd 224 Mersey Street, Invercargill, Ph 03 214 1055, contact Glen Howley. NZS4211 Affiliated.

Wanaka Joinery & Glass Ltd 52 Ballantyne Road, Wanaka, Ph 03 443 7890, contact Kent McIntyre. NZS4211 Affiliated.

Joinery Specialists 1997 Ltd 608 Kaikorai Valley Road, Kenmure, Dunedin 9011. Ph 03 488 2371, contact Graeme Emmerson.

A total of 153 projects in 33 countries were carried out by 2,004 employees. The results underscore the broad scope of the initiative: more than 900 trees planted, 22 liters of blood donated, and measurable savings of 1.8 tonnes of CO₂ emissions and 1.7 tonnes of waste exemplify the active contribution to environmental and resource protection. In addition, donations and ﬁnancial contributions amounted to approximately €77,000.

O’Brien Group 2012 8 Gow Street, Mosgiel, Ph 03 489 3849, contact Peter O’Brien.

Form Joinery 23 Little Alpha Loop, Wanaka 9305. Ph 021 483 676, contact Nick Elliott.

JP Quality Kitchens Limited 66 Vogel Street, Dunedin, Ph 021 474 300, contact John Peddie.

Sustainability and social engagement have been integral parts of the corporate culture for decades and are deeply embedded in the DNA of the sister companies Leitz, Boehlerit, and Bilz. Since 2022, WeCare has systematically united these activities of the Brucklacher Group in the ﬁelds of society, social aﬀairs and culture, as well as biodiversity, nature, and environmental protection, making them more visible on an international scale and continuously developing their impact.

Fawn rescue in Germany.

Wedgerwood Joinery Ltd 11 Ngapara St, Alexandra. Ph 03 448 8832, contact Russell Mair. NZS4211 Affiliated. Wood Solutions 5 Orari St, Sth Dunedin, Dunedin. Ph 03 479 2323, contact Andrew Bellamy. NZS4211 Affiliated.

 Tree planting in Brazil.

JOINERS Magazine September 2026 page 84

FIMMA + Maderalia 2026 - Valencia Spain

Wood is emerging as a strategic material, aligned with decarbonization and sustainability goals, and increasingly present in industrialized construction systems.

New Industrial Construction area A new area at FIMMA + Maderalia will showcase the latest advances in technology, finishes, and materials for industrialized construction within an innovative exhibition space that will combine stands with demonstration and training areas. The Fair will host the live construction of an industrialized structure with plans to build a three-story building made of wood. Feria Valencia and FIMMA + Maderalia take another step in the strategic positioning of the biennial with the launch of the ﬁrst edition of the “Industrialized Construction Fair,” a new and distinct exhibition area that has its own identity while being fully integrated into the overall oﬀering of FIMMA + Maderalia, which will hold its next edition from 1013 November in Valencia, Spain. This is a space that responds to the transformation currently taking place in the building sector, where concepts such as sustainability, productive efficiency, waste reduction, and the industrialization of processes are shaping the future of construction. In fact, the “Industrialized Construction Fair” will take advantage of the strong synergies with the traditional sectors of FIMMA + Maderalia, especially in areas such as technology, machinery and the promotion of wood construction.

The objective is clear: to expand the scope of FIMMA + Maderalia to meet these new demands, integrating solutions that directly connect with its DNA: technological innovation applied to materials, advanced production processes, and the valorization of wood as a key element in the construction of the future. An exhibition ecosystem with machinery, technology, and wood The new fair will feature a selection of exhibitors showcasing their latest innovations in machinery, process technology, structural wood, and industrialized construction components. This will create a unique environment where industrialized construction is directly connected to the sector’s production capacity, from the transformation of structural wood to component manufacturing, including process automation and industry digitalization.

Wood is thus emerging as a strategic material, aligned with decarbonization and sustainability goals, and increasingly present in industrialized construction systems. An experiential space within the major sector showcase The Industrialized Construction Fair will also bring a strong experiential component to the overall event. Among the planned initiatives are the live construction of an industrialized structure and the erection of a three-story building, integrating real solutions and applied technology from exhibiting companies at the event. This will be complemented by a comprehensive program of technical sessions, presentations, and live demonstrations, reinforcing the value of FIMMA + Maderalia as a platform for knowledge, training, and business generation.

A meeting point for the entire value chain This new space is aimed at all professional profiles already part of the FIMMA + Maderalia ecosystem—industry, speciﬁers, and the contract channel— while also incorporating new stakeholders such as developers, construction companies, technical carpentry firms, renovation companies, engineering ﬁrms, and public administrations interested in the industrialization of building. With this initiative, Feria Valencia is promoting a more cross-cutting trade fair proposal, connecting industry and construction within the same environment and reinforcing the role of FIMMA + Maderalia as a benchmark event also in the field of new construction and building models. www.fimma-maderalia. feriavalencia.com/

JOINERS Magazine September 2026 page 85

Opinion

Manufacturing’s automation moment is here – now comes the workforce challenge You lock up your warehouse at night, switch off the lights and press play on an autonomous drone. By morning, it has flown the aisles, scanned barcodes, completed stocktakes and delivered real-time inventory data before the first staff member arrives. For some manufacturers, that future isn’t coming - it’s already here. Having recently attended the MAKE NZ industry conference at the engineering and manufacturing show EMEX - alongside spending the past few months visiting manufacturing sites across New Zealand - I’ve had a frontrow seat to how quickly technology is evolving. From collaborative robots (co-bots) on factory floors to increasingly sophisticated AI and automated systems in warehousing and distribution, one message came through consistently: the biggest shift isn’t machines replacing people. It’s that the people alongside those machines now need different skills. There is still a persistent narrative that technology equals job losses. But across manufacturing floors, warehouses and engineering workshops, the reality looks different. Across many manufacturing environments, technology is changing jobs faster than it is removing them. Take robotic welding. A robot may handle repetitive work, but it still needs someone who understands welding quality, tolerances, and outcomes. Visit a distribution centre, and you’ll see technology moving stock, but humans still analysing outputs, monitoring systems and solving problems when things go wrong. Are robots ready to fly solo? Recently, I visited a manufacturer trialling a machine designed to automatically pick up boxes, stack

Jo Verry from Competenz.

pallets and shrink-wrap them. Impressive? Absolutely. Faster than the person standing next to it? Not even close. The lesson is simple: technology still needs people. Technology is not a procurement decision - it’s a workforce project The strongest manufacturing investments happen when conversations about technology and workforce capability start early. If new technology, robotics or AI-enabled systems are on your roadmap, ask now: who will operate it? Who will maintain it? Who will monitor outputs and manage exceptions? What new skills will supervisors need? This is where workforce planning becomes more valuable than talking about training alone.Bringing workforce partners into technology planning conversations before equipment arrives creates opportunities to build capability early - whether that is through structured on-the-job learning, targeted microcredentials or broader workforce development. When done well, technology and workforce investment should happen side by side. Adaptability is becoming manufacturing’s newest superpower Manufacturing has always evolved. What is changing is the speed. Export customers increasingly expect more data, more traceability and greater visibility

JOINERS Magazine September 2026 page 86

across supply chains. In some cases, modern production systems are becoming less of a competitive advantage and more of a requirement to stay in the game.

ondary school subjects - creating one of the biggest opportunities in years to better align what students learn with what employers actually need.

That means the workforce needs to evolve too. One concept gaining attention is reverse mentoring, where younger workers support experienced teams with digital capability while learning operational expertise in return.

Importantly, these new subjects won’t be developed in isolation. The Manufacturing and Engineering ISB will work alongside employers, educators and schools to help shape pathways that reﬂect real workforce demand - ensuring young people are developing capabilities that match the jobs, technologies and workplaces they are likely to enter.

We know skills are becoming more transferable too. The capabilities needed to oversee modern production systems, interpret data, troubleshoot systems, and lead teams are no longer confined to a single sector. They move across manufacturing, engineering, logistics and beyond. For people leaders, this creates both a challenge and an opportunity. People are more likely to stay where they can see a future for themselves. Building clear development pathways around emerging technology isn’t just about capability - it’s increasingly about retention. The first rung on the career ladder is changing Perhaps the biggest shift is happening right at the workforce entry point. Historically, many workers entered manufacturing through repetitive, manual or productionline roles. But what happens when technology increasingly absorbs those tasks? The first job may no longer be loading boxes or manually checking inventory. It could involve monitoring systems, quality assurance, interpreting machine data or overseeing AI-enabled systems. That raises a bigger question: are we preparing young people for those jobs? This creates a genuine opportunity for industry, schools and workforce partners to rethink what work-ready means. Last month’s Budget announcements allocated $15 million for Industry Skills Boards (ISBs) to develop at least eight new industry-led sec-

We need stronger digital capability, systems thinking, problemsolving skills and transferable capability that moves across sectors. Because tomorrow’s workforce may need to understand AI-enabled systems, data and quality processes before they ever step onto the factory ﬂoor. Now the challenge - and opportunity - is making sure those new pathways reflect where manufacturing is heading, not where it has been. Workforce planning matters at every size Technology-driven change is already reshaping manufacturing. The businesses that thrive won’t necessarily be those with the newest or biggest technology investments - they’ll be the ones planning their workforce around the changes ahead. For large manufacturers, that may mean significant investment in new systems. For smaller businesses, it may simply mean asking diﬀerent questions earlier, building capability gradually and preparing people for what comes next. Because the future of manufacturing won’t be built by technology alone. It will be built by people who know how to work alongside it. Jo Verry is a Senior Key Account Manager at industry training organisation, Competenz

PRODUCT focus

NZ Pilot programme

NEW from Blum

Robust and easy to install Plicobox is the newest box system from Blum.

PLICOBOX a new concept for anything but kitchens PLICOBOX is now available in a pilot programme to NZ Joiners; be among the ﬁrst in the world to install our newest box system for living spaces! Designed speciﬁcally for use in living areas such as wardrobes and furniture, PLICOBOX uses 7/8 extension runners for the perfect balance of performance and value. PLICOBOX delivers innovative, unmatched installation times by integrating the base and back into the cabinet hardware. The robust 5 mm folding base is made out of a quality HPF, with a density of 900 kg/m3 - over 200 kg/m3 more than standard MDF bases - and boasts an impressive 25 kg weight loading per drawer! The simple, speedy, tool-free concept allows you to install your sides, base, and back in just 3 straightforward steps. Fold. Push. Done. Just fold up the back, and the HPF base and back piece is ready for assembly. Now push the folding base into the drawer sides and secure with the locking levers - no tools needed.

Ready to join our pilot programme? Touch base with your Blum Account Manager to find out more!

JOINERS Magazine September 2026 page 87

ADVERTISER INDEX m

The total CAD/CAM solution for all your manufacturing of

classified advertsing

$295

+gst

Wood

Metal

Stone

Plastic

info@alphacam.co.nz www.alphacam.co.nz

WOODWORKING MACHINERY SELL, SERVICE, MAINTAIN: EDGE BANDER CNC ROUTER MACHINE PANEL SAW WWW.HOLDMAC.CO.NZ INFO@HOLDMAC.CO.NZ 09-2173489 022-4669899 25A ANDROMEDA CRESCRNT EAST TAMAKI, AUCKLAND

All About Labels

Archant

BCITO

Biesse Group

11,19

Blum

44,45

Enko

Egmont Air

Farnese

7,26

P: 09 947 - 4288

michael@joiners.net.nz

MACHINERY Wide range of used machines available

Prowood Machinery Ltd Phone 09 442 5699 www.prowood.co.nz

Fit Hafele (NZ) Ltd

ifc,1

Phone 09 820 9486

Halswell Timber

Hideaway Bins

Hold Machinery

www.machinesrus.co.nz

NZ’s largest range of new & secondhand equipment

0800 522 577 www.jacks.co.nz Machines that mean business

It’s the perfect design & machining software for people producing: Kitchens Office fit-outs Built-in Wardrobes Interior Joinery

New Zealand SCM Agents

Routers Edgebanders Beam Saws (09) 278 1870

Homag IES Jacks

21,23,61 9 obc,47

Joinery IT

Laminex

Leitz

Machines R Us

Nelson Pine Industries

NZ Duct & Flex

NZJMF

NZ Panels Group

One Finance

Panelform

PPG

Resene

Sage Doors

Seearco

Titus

Treotham

Windsor Industries

info@polyboard.co.nz www.polyboard.co.nz P: 09 947 - 4288

OCTOBER

JOINERS Magazine September 2026 page 88

Representing the joinery manufacturing industry

PRESENTED

MASTER

JOINERS

INDUSTRY DAY 2026 BE PART OF THE CONVERSATION. Get to know the drivers shaping your next 12–24 months. VENUE

DATE

New Zealand Parliament Wellington

Tuesday 22 September 2026

Discussion Topics

Industry Day brings together joinery manufacturing and supplier businesses with government representatives, industry leaders and the wider construction trades to

01 Manufacturing

02 Economic Outlook

03 Timber & Forestry

04 Workforce &

05 Building Research

06 Industry Open

Outlook

discuss the issues shaping the future of the industry. It is not a promise of policy change – it's a genuine opportunity to be seen, be heard and strengthen crossindustry relationships. Come be part of the conversation.

& Innovation

Immigration

Forum

“What does it take to build a strong, resilient domestic joinery manufacturing and wider trade sector in New Zealand — and how do we get there together?”

Hear from —

GOVERNMENT REPRESENTATIVES

LEADING ECONOMISTS

INDUSTRY LEADERS

STRATEGIC INDUSTRY PARTNERS

BE PART OF THE CONVERSATION.

masterjoiners.nz/industry-day/ Registrations open 24 August 2026

PART

THE

CONVERSATION.

JOIN US AT

JacksTech 2026 Celebrating 80 years of supporting New Zealand woodworking.

16th-17th September 2026 Jacks Auckland 19 Allens Road, East Tamaki

THE FUTURE HAS ARRIVED!

SCAN TO REGISTER

Machines that mean business